Cannot start Linux since 5.0.2

Similar Questions

• Cannot start linux USB drive on the PC of Compaq CQ2903ES

  Hello

  I am trying to install linux on a Compaq CQ2903ES desktop PC. I disabled startup secure on the bios, but the system does not boot from a linux live USB.

  Any suggestions?

  Thanks in advance.

  Hi Paul,.

  I can confirm that following your directions, and starting from a DVD, I could install linux on it. This isn't what I wanted at first, but it helps.

  Therefore, the solution is:

  1. Disable secure boot.
  2. Enable legacy start.
  3. Set boot order (DVD first in legacy trunk).
  4. Start the PC and enter the code + entry.
  5. Again, start with the inserted bootable DVD.

  Thank you much for the help.

  Best regards.

• Delete the Linux partition and now cannot start PC

  Hiya,

  I had partitioned my HD to a disk of windows xp and linux by car. I deleted the Linnux partition using the application for the removal of a partition in windows. I cannot start my computer now. When I turn on my PC, I get the screen toshiba with all the small icons and then what follows:

  Intel Boot Agent GE v1.2.45
  Copyright (C) 1997-2007. Intel Corporation

  PXE - E61 Media test failure. check the cable
  PXE - M0F: exit Intel Boot agent.
  error: no such partition.
  grub rescue >

  I do not have my recovery as I am overseas at the moment. What can I do? I use a friends pc to write this. The sick PC is a laptop.

  I'm not very computer chip - so if you are kind enough to answer for me, please speak slowly and use easy words ;-)

  Van
  Shaari

  Hello

  You can download the Setup from the Microsoft page of WIindows disk:
  http://support.Microsoft.com/kb/310994/

  Then you could install the Microsoft recovery console that helps you use the commands * Fixmbr and Fixboot * to fix the Boot Manager:
  http://support.Microsoft.com/kb/307654/

  I think this should help other rational use the Live like BartPe or WinPE disc to boot up the laptop.

• Cannot start to any Windows media - BIOS, Linux okay.

  Yesterday, on my Windows 7 Pro computer, I tried to access management of the computer via r - clicking on "Computer" and select "Manage", but apparently the link ceased to exist;  However, I could access it via "Administrative tools.". Curious to know how long it lasts, I tried a system restore, that actually do anything, so I tried to restore to the rear.  Is where the real fun begins...

  The bluescreened to computer with the message "PROCESS1_INITIALIZATION_FAILED," SEO Stop: 0x0000006B (0xFFFFFFFFC000007A, 0 x 0000000000000006, 0 x 0000000000000000, 0 x 0000000000000000).
  Now when I try to boot into Windows, I have to make a choice between "Start Windows normally" and "Repair", nor what kind of work.  'Normally' give me the blue screen and "Repair" will not work because my keyboard or mouse will work in a Windows environment.
  I tried different mice, keyboards and plug it into different ports, but absolutely nothing, not even a cursor frozen on the screen.  I also tried a hot spare Win PE with the same result, as well as the Windows installation disc, and various Windows-based bootable USB flash drives - once again, several USB ports.  And Safe Mode is a 'no-go '.
  HOWEVER, everything works perfectly in the UEFI BIOS and all the other screens prior to Windows.  AND I can boot into various Linux distributions installed on an SDHC card that is placed in a USB adapter.
  You are using Linux, I was able to follow the instructions I found on the Microsoft Support, delete the Bootcat.cache file, located in C:\Windows\system32\codeintegrity.  That no longer works.
  Any suggestions before I have turn this into a Linux computer?

  What worked:  I was able to start Linux (Mint distribution has functioned well), and from there I used the Terminal to reformat the drive for ext2, a Linux file system.  I thought that it doesn't really matter what I used, because Windows don't want to reformat anyway; I want to just get rid of all that was to keep the HIDs work.

  Then I started on the installation of W7 disc - believe me, I have never been happy to see a slider! -After all the wanton 'you can do that' messages I finally got things the way Windows he wanted and now W7 is installed, complete with mouse, keyboard and the 'computer' right click 'Manage' option intact.
  I did all the instructions I used to reformat the drive using Linux;  If someone wants to, reply to this message and I'll paste them here.

• Tecra S5 - adapter to display cannot start - Code 10

  Hello

  I have a problem with my laptop (Tecra S5 series).
  Every time when I start or restart my laptop, the screen moves too slowly, it has yellow bands and sometimes is flashing.
  When I open the Device Manager I see the graphics card (NVIDIA Quadro NVS 130 M) with yellow circuit with a brand extension. When I go inside it is said: the device cannot start. Code 10.

  Then I have to go Safe Mode, uninstall the drivers for NVIDIA Quadro NVS 130 M, reinstall and restart. I noticed that when this video adapter is OK, so I don't have problems with my laptop screen.

  Can someone help me?

  What operating system do you use?
  I put t know since when you have this problem, but if this happens again and again I recommend you to install original OS that you got with your laptop. It contains the original, including the display driver drivers, and something like that should not happen.

• Satellite A660-158 - cannot start Windows

  Toshiba Satellite A660-158

  I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

  My problem:
  Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
  -----
  Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
  1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
  2. choose the language settings, and then click Next.
  3. Select "repair your computer".
  If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

  Status: 0xc000000e

  Details: Unable to start menu, since the required device is inaccessible.
  -----
  Please help me! Idon't know what make me)
  Please write to E-Mail: [email protected]

  Post edited by: HunterS7777777

  Hey,.

  And why do you think the hard drive is faulty?
  Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

  Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

  If you have any other questions, please let us know! :)

• My 8 victory... infected with the virus cannot start in safe mode...

  recently, my computer of windows 8 has a virus... (miss click an ad pop up and it's on the computer)

  I already got Malewarebytes Anti Maleware and installed AVG, but this virus that bypassed and infected my computer. I tried the standard F8 during startup to go into safe mode and run my anti virus scanners, but apparently it does not work in windows 8. Some say SHIFT F8, that does not work either. Also any other method of setting up safe menu starting boot or mode does not work as it should connect on the desktop to go threw the settings and activate it for the next boot upward. This does not work for me since the virus I have apprently made my fall display driver, after I get my user password to start the desktop computer, so I don't see anything but the pointer of the mouse, everything is black. Y at - it another way to start in safe mode or trigger a recovery system or restore without actually being on the desktop?

  Why windows might change?

  I already ordered a recovery disk as that seemed to be my only option. But the works of windows 8 way I will NEVER buy a computer with it again. Cannot start in safe mode and can't do the simplest task without being a great test. It's crazy. I thought that windows 8 was supposed to be simple and easy to use!

  Please reset your PC. The procedure is given in the link below:

  http://support.HP.com/us-en/document/c03546603

  If this does not help, recovery of the system to the factory settings. Consult the following document:

  http://support.HP.com/us-en/document/c03489643

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• EliteBook 820 G3: Map of G3 LT4120 LTE Elitebook 820 - Code 10 cannot start

  I am unable to get the OS to recognize/well install drivers for a HP LT4120 card WWAN LTE snapdragon. Install the driver package SP75259 successfully, but the driver always show an error in Device Manager - the device cannot start - code 10

  Hello Doyle792,

  Have you also updated your firmware BIOS and Chipset drivers? It is often prerequisite for many pilots.

  In addition, I know that you said that you receive an error in your device manager. It may be another driver that generated this question, OR the system may be looking in the wrong place for the driver you need. In the Device Manager, right click on the device with the error and go to "Properties". Then, on the Details tab, in the drop-down list, select hardware IDS. Copy the ID of the longest and plug it into your favorite search engine. You may be able to pull up the name of the driver that generated the error.

  If it is the same driver causing the error, since the Manager of devices, right click on the device once more. Select "update driver software... "and select"Browse my computer for driver software. "Then, select Browse and then find your C:\ drive. If the correct driver is installed, it must be able to find it in this way.

  I hope this helps!

• No audio output because High Definition Audio Driver cannot start (Envy 17 Quad) HDMI

  Since I bought this laptop two months ago, the HDMI audio has always been inconsistent. I remember working once or twice, but there were several times when my audio driver recognizes that an HDMI cable is connected. Yes, I tried everything that is obvious: computer shutdown, control devices disabled in playback devices, drivers, etc.. Now, when I plug an HDMI cable, the video is fine but the IDT High Definition Audio CODEC does not recognize HDMI / my TV. The High Definition Audio Driver says it cannot start, but I could not reinstall or find a download from the HP Web site. How can I get audio through HDMI to my TV?

  Well, I think I have it solved. I have plugged the HDMI cable and uninstalled the generic audio driver broke, then scanned for the hardware changes. Audio driver reappeared in the work and there was audio cable to the tv.

• Cannot start in the middle of the upgrade from Vista to Windows 7

  Try to upgrade one of our own machine for future larger deployments. Windows Vista business to Windows 7 Professional.

  A ran the Advisor Windows 7 and got a little nudge upward after updating Nvidia 7300GT drivers for Windows 7 plug.

  It goes through the process, gather information, copy files... etc. 90 minutes later, it stops and tell me that it cannot start depui this facility. Click here and out you go!

  Don't want to do a clean Reload because tons of the toreinstal program.

  Any suggestions?

  Thank you

  Michel

  Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Firewall does not start. Cannot start connection ICS internet sharing service

  Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

  Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

• AC 97 cannot start code.10

  keep get AC97 cannot start code.10. visited mr fixit. updated the driver. summer on the internet. uninstalled several times. been in the bios to check if all audio is enabled. reupdated pilot.  Maybe the problem is that it is an e machine from England. in all cases I have worked on this situation since I have this PC for about 2 months and still trying to find the right answer.

  Hello

  See the Microsoft articles below to work on the issue.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

• Windows XP, Skype 5.0, Logitech Pro 9000 Webcam, video error: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  Everything has worked out well until the Skype 5.0 download.  Since then, the video does not appear on my screen and displays the following message: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  The driver is up to date and I have DirectX 9.0 c v.

  Thanks in advance for your help.

  Hello.  After several back-and-successive, customer relationship Skype sent me the link depending on where you can get an older version of Skype (4.2.0.187) and many other software if you need. http://www.oldapps.com/Skype.php  I installed it and the audio and video are working as it should with the Logitech Webcam Pro 9000 and Windows XP.

• Windows xp home edition cannot start.

  Hello I have an emachines 270 and loading to the top it says sorry for the onconvience, but windows does not successfully start a hardware or software change might have caused this and it remains on this page and also among the reboot for pc cd is broken

  A lot of recovery options require you to enter the Bios and make sure that booting from a CD or floppy disk, is set to boot from the hard drive.  They are not started by loading Windows, they run outside any Windows environment.  If you cannot start your machine in this way can be unservicable and need repair or replacement.

  See if you can borrow an XP CD and load the Recovery Console.

  You can use them to load the Recovery Console?

  310994 - Obtaining Windows XP Setup boot floppies
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;310994&FR=1&PA=1&SD=HSCH

  You have a few options if you can load the XP Recovery on the computer Console.

  See if you can get your hands on a BartPE CD from this link.  You might be able to use BartPE (a stand-alone XP mini on a CD and run from the bootable CD) which includes scanners virus via plugins and also the program ChkDsk.

  http://www.nu2.nu/pebuilder/

  Check your RAM and hard drive.

  http://www.Memtest86.com/
  http://oca.Microsoft.com/en/windiag.asp

  The manufacturer of the hard drive will have free diagnostic software that is bootable, or can even run in Windows, which will carefully check the status of your hard drive.

  Avira presents a FREE data recovery rescue CD
  http://www.Avira.com/en/company_news/rescue_cd_.html

  Avira AntiVir Rescue System
  The Avira AntiVir Rescue System a linux application that allows access to computers that cannot be started more. Thus, it is possible to repair a damaged system, to save data or to scan the system for virus infections. Simply double-click the package of rescue system to burn it to a CD/DVD. You can then use that disc to start your computer. The Avira AntiVir Rescue System is updated several times a day, while the latest security updates are always available.

  Avira AntiVir Rescue System
  http://www.Avira.com/en/support/support_downloads.html