Cannot start LOTUS123 using XP compatibility mode

Similar Questions

• Cannot start with using F8 safe mode. Of alternatives please?

  The PC will not start in Safe Mode; When you use F8, the only option available in the Boot menu is 'select the first boot device. I have the hard drive and click on "enter", but the PC then starts as usual. Can I run Safe Mode otherwise?

  There are malicious software that recognizes the/SafeBoot switch in the boot.ini file, and if both are present (the/SafeBoot and malware), the system starts up again in any mode until you remove the file boot.ini with the switch/SafeBoot.   Maybe this isn't the case here.

  Some malware knows you try to use the Safe Mode to find and eliminate and he won't you find and eliminate and will detect the/SafeBoot switch.    It will keep you from boot mode safe to fool you into thinking that you are using a Point of restoration., do a repair installation, or install your XP from scratch (neither of which is never necessary).

  The symptom of this affliction is the following (which can be something else with similar symptoms):

  Starting Windows...
  Loading your personal settings...
  Once your settings...
  End the session...
  Loading your personal settings...
  Once your settings...
  End the session...

  Just FYE (for your pleasure)...  I used to love the switch/SafeBoot, but will never suggest or recommend again because sometimes you will have a bigger (but fixable) problem :)

  Add the switch/SafeBoot can fix the symptom of the problem (now able to start safe mode), but will not fix the real problem, that of why F8 seems to be wrong or is misunderstood.

• Cannot start windows Vista in safe mode.

  I followed these instructions to start Windows 7 in safe mode:

  I tried to start windows vista in safe mode by using the following:

  1. Click on the Windows icon in the left bottom of the screen while Windows is running in normal mode.
  2. Click on the arrow located to the right of the lock at the bottom of the popup menu symbol
  3. Choose "restart".
  4. I restart the computer, press the F8 key and hold.  I tried at the beginning of the sequence to reboot and after that the light appears on the mouse, but still before the windows logo appears.
  5. Restart the computer in normal mode.
  6. I tried the key down and also tried pressing the F8 key several times both giving the same results without success.
  7. To eliminate the possibility of a bad keyboard, I switched from keyboards with the same results.

  Can you tell me what I am doing wrong?

  You tap f8.

  You can have a F-Lock key in the upper right corner of your keyboard.

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Read the other way at the link above.

  Table of contents > Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• Currently, I am running Windows 7 but to install a range more network adapter Linksys which is only compatible with Windows XP. Can I use the compatibility mode and install through XP?

  You can understand that I want to change my office from Wired to Wireless and really to have the adapter installed in the back of my Office Wireless (with dual band antennas).  The Linksys device is not yet recognized because I'm running Windows 7 while trying to install the drivers which are only Windows XP and previous versions. Is it possible to USE the Windows 7 compatibility mode > XP and still have a stable system when I'm not using the adapter. ?  Really appreciate the help of someone who can advise me.

  Thank you all very much,

  Roger Willis

  Calimesa, CA.

  Hi Roger

  The Compatibility Mode works with hardware or software drivers. This mode is less reliable when installing the hardware drivers that it is during the installation of software.

  If Compatibility Mode fails, your only option would be to check with the support of Linksys.

  Linksys support:

  http://support.Linksys.com/en-us/support

  Concerning

• Flex SDK 4.1 + 'Use the Compatibility Mode 3 Flex' = PROBLEMS

  7.14.10 / 06:10

  HERE'S THE QUESTION:

  When using the Flex SDK 4.1 and by checking the box 'Use Flex 3 Compatibility Mode', the Visual anomalies occur (regardless if the styles or skins is used). These include text in list ComboBox becomes invisible. It goes the same for the alert box, where no text is seen.

  I am including a screenshot showing the questions. The top image shows what happens when compatibility is checked - the ComboBox list text is invisible. The lower picture combo shows what happens when the box is not checked.

  Please note that when you use the old Flex 4.0 SDK these visual anomalies are not and everything works fine.

  

  @Jason Villmer,

  In my view, the problem you describe is http://bugs.adobe.com/jira/browse/SDK-26940.

  There is a workaround solution listed in the bug report that works (based on my tests), or you could probably put the leadership styles and layoutDirection worldwide using a block Style.

  Peter

• Cannot start Firefox using quick launch, etc. Window of Firefox (or anything else is not started. Now using IE (Ugg)

  I'm unable to launch Firefox launch button using / fast, Start Menu, or anything else, don't get no error message or of the Firefox window. Tried to uninstall and install then always without success. Cannot use the fix suggested to use a new profile because I don't get a Firefox window. Have a HP with Vista, RAM 2Gigibites, computer Pentium processor.

  Like you, I found I couldn't yet launch FF28 and therefore could not try to create a new profile or add ons disabled.

  Taking the advice of another poster and completely uninstalled FF28.

  Then went to the site of the beta:

  http://www.Mozilla.org/en-us/Firefox/beta/

  Installed FF29 (currently 29.6) and had no other problems.

  She's still all extensions / add ons I have tried to run with FF28 but opens and runs without hassle.

  Can only assume FF28 had some problems for some operating systems that are not there in FF29.

• Cannot start my satellite 4060 XCDT mode standby

  I can't start my satellite 4060 XCDT from sleep, from his sleep, I have to reboot for it to restart, sometimes, he'll leave the day before, but mostly he used, I tried updating the BIOS, nothing works!

  Hello
  often there is a problem with installed programs that Don t 'like' Mode standby or Hibernate.

  This could be for example downloadable, firewalls, Systemchecking programs.

  What additional hardware. Do you have the connected equipment that Don t supports sleep mode, such as PCMCIA cards for example?

  Good bye

• Cannot start normally after target disk Mode

  I received a 'new' 2015 documents transferring manually, Macbook Pro and I am. media and other elements of my Macbook Air from mid-2012. I put my MBA in disc Mode target to easily transfer files via Thunderbolt, but now I can't start my MBA normally - it's booting into OSX utility. I tried to close a few times, I tried to go up while pressing Option, nothing seems to work. [I am able, start-up by pressing T, to back up in target disk Mode.]

  Am I missing something? How can I get my MBA operate again as a normal computer? Thank you.

  Is it possible that you moved * elements of the MBA to MBP instead of copy them? When one of these "other elements" outside your user folder?

  * This means: hold the command key while dragging.

• Cannot start the system in safe mode - F8 no response

  Try to get to SAFE mode reset earlier date (profile does not load), but by pressing or hit F8 during the power upward has no effect and portable continuous screen PW rather than presenting the start menu (where I can choose to boot in safe mode)

  You can enter BIOS with F2 at startup?

  You may have turned on option quick start?
  

• Desktop icon error - cannot start programs using the icons

  original title: the desktop icon error

  When you try to click on the desktop icons to internet even the icon for Yahoo, has started 2 days ago, get 'cancelled due to restrictions in effect on this computer"looked at internet options, but no help, can't get the internet with the icon of internet explore that do not all other icons.

  Hi PhilWilfred,

  1. Did you the latest changes on the computer?
  2. You receive the error only on the desktop icons?
  3. You have security software installed on the computer?

  Check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If the problem persists in safe mode then I suggest that you perform the restoration of the system to the point while it was working fine.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• Cannot defragment the hard drive AND cannot start the computer in safe mode

  I have been unable to defragment my hard drive because it tells me that chkdsk /f planned.  I tried manually works in command mode nothing works.  I was advised to try to start up in safe mode, but when I do that all I get is a screen of command lines, and my computer freezes there.  What I'm doing wrong and what I can do differently?

  If you try to defragment a volume and see a message like this:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
  Please run Chkdsk /f.

  This means that the volume (disk) that you want to defragment was marked 'dirty' XP.

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is the volume of your sale or it is not dirty?

  The only way to disable the on a volume's dirty bit is to run chkdsk with error correction.

  You can click on start, run and enter in the box:

  Chkdsk /r

  Click OK and answer Yes to schedule the chkdsk next time XP restarts, restart your system and keep your fingers crossed that the chkdsk /r clears the dirty bit (you may need to run once or twice).

  If who disobeys, then you will need to start in the XP Recovery Console and run the chkdsk /r from there.

• Cannot start windows using Startup Repair

  I have a Hp Mini 2100-2190NR running windows 7.

  I have a black screen with a underscore on the top left of the page problem. I'm trying to fix it using a repair of windows 7 USB key.

  I'm following these steps below so he can help me to solve this problem:

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  I am able to load the system recovery options and do a system repair. I did repair the system several times, but he said repair of the system could not detect any problems. It says to contact the system administrator or the manufacturer of the computer for help. After that, I restart my computer but still cannot log on windows.

  What can I do? I need help with this problem. I don't want to do a factory reset.

  Hello

  One again, boot from USB of new aid, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  DiskPart

  list disk

  Select disk 0

  partition from the list

  Select partition 1

  assets

  output

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the Rescue USB and try to restart the laptop.

  Kind regards

  DP - K

• How to make a new game (Battlefield3) in compatibility mode?

  I just bought electronics Arte Battlefield3 Limited Edition, but cannot install the game because I get an error message telling me that the game requires a version of Windows Update. However, in the booklet that accompanies the CD of the game, it states that the game can be run on Windows XP. I have Windows XP Professional (SP3) on my computer.

  EA website (troubleshooting) tells me that I should start the game in "COMPATIBILITY" MODE How can I do this? I thought that 'compatibility mode' to run older games.

  Advice or guidance in this regard will be appreciated.

  Paul M Simons

  E-mail: * address email is removed from the privacy *

  Hi Paul,.
  It's weird... try this, find the file "origin.exe" right-click on it and select properties and then the tab compatibility UN check "run this program in compatibility mode".
  hope this helps,
  Eddie B.

• Try to install Indiana Jones and the infernal Machine, Windows (8 / ME) compatibility mode does not

  I try to install Indian Jones and the Doomsday Machine on my computer.
  I tried using the compatibility mode for windows 98 / ME, but it does not work. When I run the program splash arrives, but when I click on install it closes then nothing happens. There are no errors.
  I am running Windows 7 64 bit.
  Also I install the original CD, and it has worked before in older computers (running Win 98 of course).
  Any help would be appreciated.

  The game should run fine under Win7 64 bit. The problem is that the installer is only 16 bit and is no longer supported in Windows. Just use a different Setup program. Try www.markusegger.at. I'm running the Doomsday Machine, Alliance Xwing, Xwing v's Tiefighter, and Grim fandango all on 64 bit Win7 all using custom Setup programs.

  I also used the original X-wing, Tie-fighter and fate of Atlantis via Dosbox.

• Error USB device (this device cannot start. (Code 10))

  When I try to use my USB device, it displays error code 10 is to say that the device cannot start, I use win7 ultimate 32 bit OS

  Hi amardeeptanwar,

  Follow the steps below:

  Method 1:

  First, open the hardware and devices Troubleshooter to run the automated troubleshooting services.

  Open the hardware and devices Troubleshooter

  Method 2:

  See the following article in the knowledge base for instructions on fixing the code 10 error messages:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers