Cannot start my Equium L350

Similar Questions

• Operating system does not start on Equium L350 - 10L

  Hi all.
  My laptop has suddenly stopped working. When I turn it on I have a screen that says "Startup Repair" and under "Windows cannot repair this computer automatically.

  I tried to put it through a scan but nothing helped.

  I'm completely lost as to what it can be. I'm not sure if it was dropped or anything!

  Any help would be greatly appreciated.

  You know what; If you n t have some important files on your HARD drive install OS using the recovery discs. After doing this you will have own preinstalled OS and everything works again.

  If you have more photos and other important stuff saved on the HARD drive, you can remove the HARD drive and connect it to the PC and others as external one. You must have access to all your data and you can make a copy. After that put the HARD drive in your laptop and reinstall the OS.

• Equium L350 - Vista fails to start after the installation of recovery

  Hello world

  I have an Equium L350 after an accident I couldn't restart my pc. I tried to solve by using the recovery f8 menu and it did not work so I contacted Toshiba and got a restore disc. I reinstalled from the disc, after the instalation it said complete installation but visa does not start.
  I get: Windows cannot repair this computer automatically click finished to turn off your pc

  After a format and reinstall my computer broken? He is 13 months here for out of warranty

  Hello

  Normally after the installation of recovery your laptop should work fine again.

  In my opinion, it could be a malfunction of the equipment. Did you test the HARD drive for bad sectors? You can do this with Drive Fitness Test: http://www.hitachigst.com/hdd/support/download.htm#DFT
  Download the ISO image and burn it to a disk. Then you can boot from it and test your HARD drive for errors.

  I also recommend to check the RAM for errors: http://memtest86.com/
  Memtest is a good diagnostic tool for the RAM.

  I hope I could help a bit. :)

• Re: Equium L350 - 10L - start with battery power

  I just bought an Equium L350 - 10L. When he arrived, he has been turned on using the battery and started installing Windows. However, the battery expired and I can't cross the message of "close unexpectedly" even after reboot.

  How can I go back to square one and restart the installation process? Advice.

  Oh buddy, a stupid idea. I really do not understand you. After several weeks or months in the box, maybe it makes sense that the battery cannot run with full capacity.

  In any case, connect your laptop to power supply and leave it for a while. Departure for laptop to see what will happen. If the installation process can not be finished early new laptop computer and immediately press F8. First option to choose repair my computer and follow the on-screen menu. The OS will be installed again and you will be able to complete the operating system installation process.

• Re: Equium A210-1AS - blue screen and cannot start

  My computer was working fine, I stopped him, the next time I start up, it shows windows loading screen, then a second a blue screen flashes by, it restarts and repeats, I stopped and began to tap F8 until the advanced boot options appears, safemode ect... None of them work and lead all the blue screen If I select the repair option at the top 'Repair your computer' it begins to load with a background of vista and a cursor and then displays the error "the installed program cannot start. Click OK to turn off the computer. »

  in Advanced Startup Options that I try "disable automatic restart in the event of system failure" and the rest of the blue screen to the top, so I can see, it shows an error on usual blue screen, read:

  UNMOUNTABLE_BOOT_VOLUME
  STOP: 0X000000ED (0X85DDA600, 0 X 0000000, 0XC000009C, 0 X 0000000)

  I don't have a recovery CD, as I believe, there is a recovery partition, but I don't know how to access it-
  I use Equium A210-1AS
  Part number: PSAFJE-005005KS
  Windows vista 32 bit

  Thank you

  I know know that the recovery partition is consulted theough 'Repair your computer' but shows just "the installed program cannot start. Click OK to turn off the computer. »  :/

  null

  > I don't have a recovery CD as I believe, there is a recovery partition, but I don't know how to access to this

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

• Cannot start the operating system preinstalled on Satellite L350-170

  Hello!

  Today I was surfing on the internet on MSN etc and my phone froze. I tried control, alt, delete etc and nothing happened so I finally pushed the power button.

  When I turn on the laptop now I get this:

  * Windows Error Recovery *.

  * Windows cannot start. A recent hardware or software change might be the cause.*

  * If Windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the people was interrupted during startup, choose Start Windows Normally.*

  * (Use the arrows to select your choice.) *

  Launch Startup Repair (recommended) *.
  * Start Windows normally *.

  When I choose the first option (startup to launch repair) a loading bar comes up saying "Windows is loading files...". ': then a loading bar "Microsoft Corporation", then this charge and brings me to a gray screen:

  http://i43.Tinypic.com/23jspqe.jpg

  When I select the second option (start Windows normally), I just get this loading bar for ages, and that the bar is load from the top down, I kept it at least half an hour, a few times and it still remains on the loading below bar:

  http://i43.Tinypic.com/sw3jbt.jpg

  Any help is much appreciated, thank you!

  Hello

  Start your laptop and press F8 to display the advanced startup options.
  Option repair my computer is available?

  If so this option allows to enter system recovery option. There is option called Startup Repair. Try using this option to solve this problem.

  Let me know if this will help.

• Impossible to install Win2003 Server to dualboot with Vista on Equium L350 - 10L

  Hello
  I have Windows Vista preinstalled on my Equium L350 - 10L. I wanted to install Windows 2003 server on another partition in order to dual boot between the 2 operating systems. When I start with the install of Win2003 CD and access the Setup screen, I get the following error: «Setup didn't find any hard drives installed in your computer» I'm assuming (correct me if I'm wrong) I have need to install the drivers for the SATA controller during the installation when he says "press F6 to install 3 pary SCSI or RAID drivers. I have two problems: 1. I can't find the drivers for the SATA for EQUIUM L350 - 10 L controller, 2. the laptop is not a floppy drive - which is the only way to install drivers during installation. Helpful suggestions and solutions would be greatly appreciated. Thanks in advance.

  Hello

  It is important to doesn´t if toshiba does not explicitly have the F6Floppy drivers for your machine. You can go to www.intel.com and download the drivers from F6Floppy from there.

  On the issue of the 'no-floppy", you can easily find a way just in slipstreaming with nlite for self made Win2003 Server drivers CD.

  To learn more about "slipstreaming" CD with nLite, simply type 'Nlite slipstream XP ICHM8' or some of these words in google and you will find all THE answers. Or you use the forum search and find only 10000 messages on this slipstreaming with nlite, etc...

  Welcome them

• Failed to start on Satellite L350

  Without any problems before my laptop did not start today with the following screen message: -.

  "Unable to start Windows. A recent hardware or software change might be the cause. To solve the problem:

  # Insert your Windows installation disc, and then restart your computer.
  # Choose your language settings, and then click "next".
  # Click "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Boot\BCD

  Status: 0xc000000f

  Info: an error occurred trying to read the boot configuration data. »

  I don't think I got an installation with the computer disc, so should inquire as to whether it is something that can be downloaded or if there is anything which can be tried before returning the unit to the retailer

  Hello

  All new laptops Toshiba, including your Satellite L350, are delivered without Toshiba Recovery CD/DVDs and this media facilities should be created by the owner of the laptop with the help of 'Toshiba Recovery Disc Creator'. This is small application designed by Toshiba and already pre-installed on the laptop with the factory settings.

  This recovery image can not be downloaded.

  If you didn t create this disc of relocations and now cannot start your laptop properly.
  What you can try is to install the OS using Toshiba Recovery option.
  Step by step guide that you find under http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  Please install OS using this guideline. If everything works well, once again please create recovery DVDs. I recommend you to use DVD-R virgins.

• Update Bios on Equium L350 now keeps restarting to load windows screen?

  Hello guys here is my problem:

  Ive got an Equium l350 psld2e and I had a few problems with windows, so I reinstalled xp...
  After I finished installing xp I had a few short drivers... like... ethernet controller video controller and a couple more...

  in any case while searching for these downloads on toshibas website I downloaded an update of the bios (big mistake)... Then the computer restarted automatically after the download and update the Bios...
  So after reboot it load up of home toshiba as usual... screen then the screen of windows then bam a quick flash of a blue screen then the computer restarts and repeats this process!

  What is the solution? Need your help.

  Thank you

  Hello

  It seems that the laptop starts fine but the Windows operating system may not start correctly.
  In your case, I recommend once again to start and to access the BIOS.
  Here, you must set it to the default settings and must save the changes.

  In addition, you should boot from the Windows CD and must attempt to reinstall new OS.
  If this will not help so I assume that something was wrong during the update of the BIOS and the BIOS should be reflashed again.

  Unfortunately the BIOS can be reflashed back only by an ASP because ASP can use a traditional BIOS version that allows you to update if you are using external USB FDD drive.

• Equium L350 beep at startup

  Hello
  I have a laptop Equium L350 and for a few months, whenever I restart the laptop or start the computer bleeps it about 15 times before you start windows vista.

  I don't know what this means, but when she starts the function click on the touch pad does not work (not the mouse keys), was the only one I can get the touchpad to work with a button click is to open my web browser and search for something (using the left click button) then when I click it it works!

  I know this probably sounds more complicated than it is, but I'm not a big nudge when it comes to pc problems and it is difficult to explain what I mean LOL

  Also I tried to restore my laptop with the recovery disc and the same problem persists.

  This is typical when the warranty is only exhausted

  Any ideas anyone on what the problem is and how I can stop making this horrible noise

  Alan

  Hello

  I think that this sound is created by the BIOS.
  Usually the power on self test (POST) is running at the beginning of the startup procedure.
  http://en.Wikipedia.org/wiki/power-on_self-test

  MAIL scanning equipment and research of hardware problems if the beep appeared then it means that some errors were detected

  But it is hard to say what role might be affected
  Maybe it s a keyboard problem or RAM

  In most cases this error can be read by technician ASP that guys have some manuals that provide a sense of code

  PS: You are using the latest version of the BIOS? Otherwise, please udpate it!

• Equium L350 - 10L: how to make dualboot - Vista and XP

  I need help.

  How could I install an operating system of Windows XP and all keeping my Windows Vista.
  It's like having two operating systems in one.

  My laptop model is Toshiba Equium L350 - 10L.

  Thank you.

  Best regards

  Carol

  Hello Carol

  Just in a few words: If your laptop is preinstalled with Vista original recovery image please make sure that the HARD drive has two partitions (C and D also check disk management). Windows XP must be installed on the second partition. For the installation of Windows XP Home edition, you need Storage Manager. Without this Storage Manager disk HARD won't be visible for the installation of Windows XP Home edition CD.

  On this forum, you will find number of threads with the exact description how do.

  At the end you must start Manager. Using this boot manager, you will be able to choose which operating system you want to use.

  If you have any other questions please post again.

• Need to restore to the Equium L350 DVD

  Can someone please send me a copy of the DVD of restoration for the Equium L350?

  Thank you
  Russ

  Hello

  As far as I know your laptop supports a HARD drive recovery.

  This means that you can restore your device without the Toshiba Recovery CD.

  To start the system recovery, you must press the F8 key. Choose the repair of the system, and then follow the instructions on the screen.

  Of course you can also create a clean restore CD using the pre-installed tool called Toshiba recovery Disc creator.

  The link to this application should be placed on the desktop.

  Greetings mate

• Driver webcam could not open - please restart camera or Equium L350

  On my new Toshiba Equium L350, there is no any camera assistant software. I downloaded from the toshiba Web site.
  I installed it, but it does not work.
  Whenever I try to use it or when I go on my user.

  The webcam says error cannot open "driver Webcam. "Please restart camera or computer.

  I tried to restart and reinstall, but nothing works.

  Can someone help me?

  Hello

  I have a few questions;
  You see the camera help software in the taskbar?
  You use some applications like Messenger from MS that would block the webcam?

  I read on a webcam on Vista laptops issue. It was related to the Vista operating system. There was a bug that has been solved with the installation of SP1.

  You have installed SP1?

• Equium L350 graphics - 10L card problem

  Hello
  I have the Equium L350 - 10L. He shared video memory and I was wondering if it is possible to change the amount. I see that it is not in the BIOS and is there a 3rd party tool is? Reason is that I want to use OS X Leopard, but I need to edit the video to be able to start (otherwise I just get a screen of white discoloration with two lines to).
  If anyone has had experience with Leopard on this laptop and managed to make it work with QE/CI please tell me how you did it!

  Thank you very much
  Jonty

  Leopard is not for me, but what I do know, is that there is no setting where you can change the amount of video. It will happen automatically. With more RAM inside, more memory will be reserved for video performance.

• BOOTMGR image is corrupt. The system cannot start.

  Toshiba Satellite L355: MODEL No.: PSLD0U-00800 X

  Start the computer, a black screen with the wording of the "BOOTMGR image is corrupted.  The system cannot start. »

  Use the Applications/drivers, satellite L350 series windows vista Home Premium 32 - Bit SP 1 comes with the laptop in the DVD player and Toshiba Recovery and you will see the loading of the window.  After a certain time.  Screen pop up as Windows boot manager below:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your computer manufacturer or the system administrator.
  File:\windows\system32\boot\winload.exe
  status: 0 xC0000001
  Info: the selected entry could not be loaded because the application is missing or damaged.

  He did not show the original image from all the instructions on-screen (System Recovery option).  How the diagnosis without system recovery option to find the laptop computer component failure?  First impression of the BOOTMGR image is corrupt is the failure of hard drive, but I replaced the new hard-drive(SATA 2.5"MOMENTUS") and tried used the disc of discovery.  The result displays same window boot manager as described above.

  What is the suggestion to the exception to send to the repair shop?  Thank you

  Hello

  Your Toshiba did not come with two discs? One allows the Startup Repair - start a boot and press F12 for
  Select DVD as the boot device.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or use a Vista disc
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Unable to boot Windows vista-windows boot configuration data file is missing required information-
  Repair Corrupt Boot Manager
  http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair
  starting in Windows Vista problems
  http://support.Microsoft.com/kb/927392

  How to fix "BOOTMGR is missing" in Windows Vista
  http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing.
  required information.
  http://support.Microsoft.com/kb/927391

  Vista tip: Fix error "BOOTMGR is missing" - a quick way
  http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

  See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  If necessary:

  Toshiba support - click on connect and contact the technical support and/or forums
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.