Equium L350 beep at startup

Similar Questions

• Equium A200 - continuous beep on startup

  A colleague has spilled water on an A200 Equium and therefore it emits a continuous beep on startup. In fact, you get one beep, immediately followed another. However, if you press F1 it starts OK and all is well. I ran Diagnostics and found nothing wrong.
  The only problem is that one or two of the keys work fine if you lightly touch them.

  Someone has ideas about resetting the sound signal, or what I could do? Thank you.

  Andy

  Hey,.

  I think that it s is not easy to say why this is happening but maybe the water has damaged the keyboard and there so always will be in a hurry I don t he know exactly.

  I think that it is not so useful for you if we discuss it here without test and we don t have made real for your laptop should be checked by a technician of the laptop. Guys can make a detailed diagnosis and order spare parts.

  On the Toshiba site, you can find a list of good luck of suppliers registered!
  :)

• Equium A100-306 beeps at startup

  Hello

  I have an A100-306 which, at startup, beeps for about 30 seconds, then starts up fine and then works perfectly, if I look at the laptop all the ram is recognized and the CPU seems very well, there is no display problem, the only thing that doesn't work is the CD drive doesn t recognize disks but the drive shows on the laptop , but if I remove the CD drive still beeps on startup anyway.

  Any ideas anyone?

  Hello

  The beep code during POST (power on self-test) means that an error has been detected on the motherboard.
  But it of really difficult to say what could be the problem here, you said RAM is recognized correctly hmm try to remove a RAM module and start Notepad using RAM only one in each slot

  All devices are connected to the laptop? If so, unplug everything (all devices) and try again.

• MacBook Air mid 2009 3 beeps at startup

  Hello world!

  I had a problem: after a few hours of videos online watch my book mac freezed with sound fixed.

  After that I pressed the power button and shut down the computer. After evil market see black screen and hear 3 beeps.

  Also: I have used all the key-combination to repair the situation, problem still there.

  P. S.

  ALT-CMD-P-R - give me long 3beeps - 3beeps short - long 3beeps

  And now I want to try a version:

  "Same for me here.

  My MacBook Air mid-2011 with 4 GB of RAM would be only 3 beeps on startup.

  "Put the logic card 8 minutes in the oven at 190 degrees celsius - was again very well then begin."

  of https://ru.ifixit.com/Answers/View/27783/3+beeps+on+start+up

  Dear Mac users, if you have and idea to fix my mac - please enter into this discussion.

  Good day!

  Problem with RAM.

  https://support.Apple.com/en-us/HT202768

  Please contact Apple.

• Equium L350 - 10L - where can I find the right driver WLAN?

  Hello

  I changed my windows, so I need to install the driver for my Toshiba Equium L350 - 10L Wlan. I downloaded all the drivers from the Web from Toshiba site, but it is still showing this missing Ethernet controller.

  Can someone help me solve this problem?

  Thank you.

  Hello

  Are you sure that it s the WLAN card?
  Ethernet controller could also be the normal LAN card.

  Here, you can check which driver you need:
  http://www.PCIDatabase.com/
  The vendor and device ID, you can check in-online properties of the Ethernet controller device manager. You should find something like VEN_xxxx & DEV_xxxx

  After that, you can download the appropriate driver.

  Welcome them

• Satellite P300 - 13 M - beeps at startup

  Hello

  My laptop now and then beeps at startup and then I get a black screen (and can't do anything)
  The beepingsounds goes as follows: BEEEEEEEEEEEP BEEP BEEP (1 x long - 2 short)

  Anyone know what this could be?

  It is very annoying when I want to show my client project and all of a sudden the laptop no longer works...

  Thnx in advance

  Raey

  Hello!

  Beep codes mean that there is a faulty hardware component.
  It's not easy to tell what is the reason for this, but in your case I would try to exchange the RAM.

  If it doesn't work you should contact an ASP and ask for help. Technicians can check your laptop and exchanging all the necessary parts.
  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Pavilion dv7t-7000: Notebook keeps beep at startup

  I have a hp model pavilion dv7t-7000 with a (version F.29) Insyde bios that retains a beep on startup until the bios Setup menu appears.  This started in the last three months and went from occasional incidents to a constant.  Someone else has a similar problem, and if so, what can I do to fix this.

  Hi .in my experience the keyboard has a sticky key.
  And can be replaced.
  Is the pc still under warranty?

• Impossible to install Win2003 Server to dualboot with Vista on Equium L350 - 10L

  Hello
  I have Windows Vista preinstalled on my Equium L350 - 10L. I wanted to install Windows 2003 server on another partition in order to dual boot between the 2 operating systems. When I start with the install of Win2003 CD and access the Setup screen, I get the following error: «Setup didn't find any hard drives installed in your computer» I'm assuming (correct me if I'm wrong) I have need to install the drivers for the SATA controller during the installation when he says "press F6 to install 3 pary SCSI or RAID drivers. I have two problems: 1. I can't find the drivers for the SATA for EQUIUM L350 - 10 L controller, 2. the laptop is not a floppy drive - which is the only way to install drivers during installation. Helpful suggestions and solutions would be greatly appreciated. Thanks in advance.

  Hello

  It is important to doesn´t if toshiba does not explicitly have the F6Floppy drivers for your machine. You can go to www.intel.com and download the drivers from F6Floppy from there.

  On the issue of the 'no-floppy", you can easily find a way just in slipstreaming with nlite for self made Win2003 Server drivers CD.

  To learn more about "slipstreaming" CD with nLite, simply type 'Nlite slipstream XP ICHM8' or some of these words in google and you will find all THE answers. Or you use the forum search and find only 10000 messages on this slipstreaming with nlite, etc...

  Welcome them

• xw4100: HP xw4100: five long beeps at startup

  HP xw4100 is five long beeps at startup. What it means?

  Hello:

  5 beeps = a memory problem any.

  The normal troubleshooting steps involve the removal and reinstallation of each strip of memory.

  If that does not receive the 5 beeps to get out, then remove all of the memory modules but one and test each of them in both to isolate the faulty memory module.

  If this does not work, probably the motherboard has failed.

• Update Bios on Equium L350 now keeps restarting to load windows screen?

  Hello guys here is my problem:

  Ive got an Equium l350 psld2e and I had a few problems with windows, so I reinstalled xp...
  After I finished installing xp I had a few short drivers... like... ethernet controller video controller and a couple more...

  in any case while searching for these downloads on toshibas website I downloaded an update of the bios (big mistake)... Then the computer restarted automatically after the download and update the Bios...
  So after reboot it load up of home toshiba as usual... screen then the screen of windows then bam a quick flash of a blue screen then the computer restarts and repeats this process!

  What is the solution? Need your help.

  Thank you

  Hello

  It seems that the laptop starts fine but the Windows operating system may not start correctly.
  In your case, I recommend once again to start and to access the BIOS.
  Here, you must set it to the default settings and must save the changes.

  In addition, you should boot from the Windows CD and must attempt to reinstall new OS.
  If this will not help so I assume that something was wrong during the update of the BIOS and the BIOS should be reflashed again.

  Unfortunately the BIOS can be reflashed back only by an ASP because ASP can use a traditional BIOS version that allows you to update if you are using external USB FDD drive.

• Equium L350 - Vista fails to start after the installation of recovery

  Hello world

  I have an Equium L350 after an accident I couldn't restart my pc. I tried to solve by using the recovery f8 menu and it did not work so I contacted Toshiba and got a restore disc. I reinstalled from the disc, after the instalation it said complete installation but visa does not start.
  I get: Windows cannot repair this computer automatically click finished to turn off your pc

  After a format and reinstall my computer broken? He is 13 months here for out of warranty

  Hello

  Normally after the installation of recovery your laptop should work fine again.

  In my opinion, it could be a malfunction of the equipment. Did you test the HARD drive for bad sectors? You can do this with Drive Fitness Test: http://www.hitachigst.com/hdd/support/download.htm#DFT
  Download the ISO image and burn it to a disk. Then you can boot from it and test your HARD drive for errors.

  I also recommend to check the RAM for errors: http://memtest86.com/
  Memtest is a good diagnostic tool for the RAM.

  I hope I could help a bit. :)

• Equium L350 - optical drive problem

  I have a beautiful Equium L350 which I use for very basic tasks such as e-mail and internet shopping.
  I'm an absolute fool when it's nothing technical, even remotely.

  However, I bought this laptop in May last of PC World, Cardiff and were very happy until a few weeks ago when I went to use the 'optical driver' (thing stick you a disc in?) for the first time.
  My daughter had a Barbie MP3 player for her birthday and I was trying to download all the relevant stuff from the disk, and nothing happened.
  I don't know from reading this that you can see how hopeless, I am!

  I have assumed that I was doing something wrong, until a colleague told me that he had the same problem with their Toshiba last year and there was a problem with the optical driver.
  In any case, for 3 weeks, I have been ringing Toshiba trying to get some help.
  I'm losing the will to live!

  I'm put on hold each one each time for more than 20 minutes at a time.
  I haven't talked to anyone! I sent (no reply!) and PC World have been just as useless as telling me that I need to contact Toshiba direct.

  Did anyone have a number for them to the United Kingdom for service / warranty repairs / help of any kind! I love the machine, but the lack of customer service is soul destroying! I would be so grateful for any kind of comments!

  Thank you ever much for taking the trouble to read this :)

  Sarah

  Hi Sarah

  May I ask what's exactly wrong with your laptop?

  You said something about Barbie Mp3 player.
  How to connect to the laptop and what do you do with this 3rd party device?

  You want to put some mp3 files to this player?

  Sorry, but I don t understand you the problem and I can't see any link between a drive optical (I think that you are which means that the CD/DVD drive) and Barbie mp3 player

  By the way:
  If there is something wrong with the hardware you need to always contact the ASP in your country.
  Here you will find the ASP database:

  http://EU.computers.Toshiba-Europe.com/-> support download &-> find an authorized service provider

  Welcome them

• Equium L350 - 11 d - how do I delete the second partition on the HARD drive

  How can I delete the second partition that came with the laptop, so I can use the full capacity of computers HARD drive?

  I feel that this partition is their because I have not created a DVD of recovery he would remove the partition once I created the recovery DVDs.

  The score contains a folder of HARD disk RECOVERY and in the folder says do not delete or change this folder or files.

  I have a Toshiba Equium L350 - 11 d

  As you have already said that the second partition contains the HDD Recovery folder if you would remove this partition you will not be able to create the recovery DVD and would not be able to recover the laptop HARD drive.

  Therefore, you must create the DVD before recovery would remove anything from the second partition on the HARD drive.

  After you create the DVD recovery successfully, you could remove the partition and could add the free space on the HARD disk on the first partition.
  This can be done on disk management!

  This is a useful page for Microsoft:
  [Using Windows and procedures: Vista HARD disk partition | http://windowshelp.microsoft.com/windows/en-us/help/d9a4d35e-efdf-406c-a049-0860180129a71033.mspx]

  Good bye

• Equium L350 - 10L: how to make dualboot - Vista and XP

  I need help.

  How could I install an operating system of Windows XP and all keeping my Windows Vista.
  It's like having two operating systems in one.

  My laptop model is Toshiba Equium L350 - 10L.

  Thank you.

  Best regards

  Carol

  Hello Carol

  Just in a few words: If your laptop is preinstalled with Vista original recovery image please make sure that the HARD drive has two partitions (C and D also check disk management). Windows XP must be installed on the second partition. For the installation of Windows XP Home edition, you need Storage Manager. Without this Storage Manager disk HARD won't be visible for the installation of Windows XP Home edition CD.

  On this forum, you will find number of threads with the exact description how do.

  At the end you must start Manager. Using this boot manager, you will be able to choose which operating system you want to use.

  If you have any other questions please post again.

• Satellite A100 beep at startup

  My Satellite A100 still beeps at startup (or when he wakes up after hibernation) as if a key is pressed down, and it will not stop until I press one ' ~ ' key (just below "Esc"). In addition, it begins this character by typing in the field log-in on the start screen.

  Any ideas why this might happen?

  HI Maria,

  It seems to me that if the key is either stuck or is defective. It is possible that the keys are shorted or the rubber under the top key shared so that contacts of does not return to the open"" position.

  I suggest that you only contact authorized Service partner who can check the keyboard.

  Kind regards