Cannot start ws 7.1.1 installation or 7.0.0, host windows 7

Similar Questions

• Cannot start Lightroom 6 (standalone) after installation - stuck at the start with scope screen not responding error

  Hi all

  As stated above, I am unable to start Lightroom 6 (standalone) after installation. I am able to launch, but I'm stuck on the boot screen (lightroom logo 6) with bezel does not no error. Would be grateful for any help, thank you very much!

  Just a suite, I use Windows 7 (x 64). I talk with the cat from adobe and I was told to create a new Administrator windows account and reinstall LR by using this new account.

  It worked for me, I am able to successfully access LR 6 using the newly created administrator account. I tried to follow up with another request - I have what patches can implement to my current user account so that I can access LR 6 using that account (and not the new windows user account). Unfortunately, I was told that cat Adobe does not support LR 6 and I am directed to ask my questions here.

  Thanks a lot again!

• cannot start, don't insert the installation disc no responses

  Last week I've updated in my vista once it was released the file: \boot \BCD with status 0xc000000f. I put my recovery disk window answered, is not obtained in the boot, press F8 did so. change of hard disk can obtained in installation but could not fix, no driver can be load. What can I do? I did all this http://support.microsoft.com/kb/927391 step, still does not work. Help, please.

  Hi oceanp,

  Even if you have the new hard drive attached, and where he does not receive on-screen detected (you don't say "no driver cannot load"), want to confirm if you have the drivers for the hard disk and use the driver to load on the screen.

  Hope you follow the step as below:

  Note: To configure the installer of Windows Vista to use the specific driver, click on load driver to load the specific driver of the media that should be inserted in the CD/DVD drive.

  As you say you updated to Vista, would like to know the brand and model of the computer and the operating system that was more early to see if we could add more suggestions to help you here.

  I hope this helps.

  SAP U G - Microsoft Support
  Visit our The Microsoft Answers site feedback Forum and let us know what you think.

• Cannot start Setup.exe of Oracle installation

  If I copy the installation of HD DVD Oracle files and try to launch "Setup.exe" from the HD, it fails. Permissions for files
  are set correctly both attributes. If I start "Setup.exe" to install DVD, I can do the full install.
  I've done Oracle facilities several times via the HD copy and make the installation and those who have worked well, but
  not in this case?
  Thanks for your help Oscar

  Go to the installation folder and then double click on Yes. Setup.exe does not work sometimes.

  Concerning
  Rajesh

• After the vista update, the file came out: \boot \BCD with status 0xc000000f. window cannot start and no response my installation dvd

  Last week I've updated in my vista once it was released the file: \boot \BCD with status 0xc000000f. I put my recovery disk window answered, is not obtained in the boot, press F8 did so. I considered that my hard drive was broken, so I changed the hard drive, but it can in installation but couldn't fix it and no driver may be dependent. What can I do? I did all thishttp://support.microsoft.com/kb/927391 step, still does not work. Help, please.

  I think you should contact the manufacturer about this problem with the Bios...

  It is usually F2 or delete to enter the Bios / configuration at startup.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot start Lightroom cc (2015) after installation

  Version again, but it does not start.

  Have you tried logging in your CC desktop app, then logging put it back? Stop/restart won't work, but logging out and back in must. See here: you connect, disconnect | Creative desktop application Cloud

• Cannot start Lightroom after successful download/installation.

  After I downloaded and installed Photoshop it appeared a button that read something like "Lauch App" next to the Photoshop icon in the Download Manager.  It worked smoothly, and Photoshop is running.  Tried to do the same thing with Lightroom however after download/install successful there is no button "launch the application '.  There is just the text reads "up to date" unless it cannot be clicked and therefore does not launch the app.  How to launch Lightroom?

  Neglecting this, after the launch of the application with normal means I realized that it was a stupid question.

• Cannot start the virtual machine guest after receiving "License expired message" host ESXi 5.5

  I can't start computer virtual invited after receiving "License expired message" 5.5 ESXi host. I am able to copy the vm folder prompted with all its files using WinSCP I had already installed on a desktop computer in the network.

  However, it takes an extremely long time to download the VM [2.5 mb/s], which is of course a different question.

  It seems that I was still on the trial with my vsphere client license, until it expired. I am able to view the virtual machine within the workstation 10, but I can't turn it on. It says "Please install a license to power on this computer" there is no way to install a license anywhere.

  My question is... .will I be able to access this virtual machine if I download on an external hard drive, then add it to 10 VMWorkstation that I possess a current valid license?

  Even if the evaluation license has expired, you should be able to connect to the ESXi host using the vSphere Client and follow the steps mentioned in the article that I posted before you enter the free license key.

  André

• Cannot install SP1 - repair service cannot start your computer

  original title: try to install Norton 2012

  I can't install Norton 2012. It says I need service pack 1, when configuring her repair service cannot start your computer and then installs nothing

  Microsoft Windows Vista® (32-bit and 64-bit) Starter/Edition family Basique/Familiale Premium/Professional/Ultimate Edition with Service Pack 1 or later is the minimum requirement to install Norton 2012.

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• CDBOOT cannot start from code: 5 CD

  Windows 7 Professional does not start. When I try a normal start with the installation disc or the Windows 7 32 bit repair disc I get a message when you start that says "CDBOOT cannot start from code: 5 CD and I find myself in a window Windows Error Recovery." When I click on 'Launch Startup Repair' Windows will load the files and immediately goes back to Windows error recovery window.

  Error code 5 - can't boot from DVD

  Some people have reported that from the installation of Windows 7 so that Windows XP/Vista is running can help with this error. Update your BIOS can also sometimes help - note that updating your BIOS can be a little risky.

  Here is a workaround that can also help:
  http://www.SevenForums.com/installation-setup/2591-boot-error-code-5-a-2.html#post31719

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Photosmart HP 5520. First installation cannot start configuration eprint. Could not be updated

  I installed the wireless printer successfully, but unfortunately I can't start installation e-print. After that I agreed to the installation it says impossible to update. The local network uses dhcp THAT SSID is hidden and I use wpa2. Once again the printer works fine but cannot start the configuration of the e-print service.

  Thanks for advantage

  I solved by myself the year problem now I can say that

  1. My provider does not have the power of Attorney and do not filter on the connection ports
  2. It was not necessary to update the firmware of the router, as in fact, I always use the version of the firmware of shop
  3. It is not necessary to install the demilitarized zone on the ip address of the printer
  4. It is not necessary to install the virtual server and enable port forwarding incoming and outgoing
  5. It is not necessari choose and configure the ip address of the router
  6. It is not necessary to DΘsactiver mac filtering, choose a special channel, disable security on the AP
  7. It is not necessary to ask the printer to set the static ip address (but you can change it)

  I installed the firmware released on 7 February and the next day, I ran the diagnostic tool installed with the printer who asked me to install a patch for the eprint service.

  After everything has worked, I installed the eprint service and got the e-mail address.

  This means that there is a bug in the firmware for the eprint service.

  Piero

• Windows XP, Skype 5.0, Logitech Pro 9000 Webcam, video error: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  Everything has worked out well until the Skype 5.0 download.  Since then, the video does not appear on my screen and displays the following message: "cannot start video renderer. Make sure you have a valid installation of DirectX.

  The driver is up to date and I have DirectX 9.0 c v.

  Thanks in advance for your help.

  Hello.  After several back-and-successive, customer relationship Skype sent me the link depending on where you can get an older version of Skype (4.2.0.187) and many other software if you need. http://www.oldapps.com/Skype.php  I installed it and the audio and video are working as it should with the Logitech Webcam Pro 9000 and Windows XP.

• 3110 webcam and Skype - cannot start video rendering engine. Make sure you have a valid installation of DirectX.

  I had a new HP Pavillion Elite running Windows 7 and bought a HP Webcam HD 3110 which is supposed to have Skype compatibility (clearly indicated on the packaging).  The webcam came with a bunch of software (ArcSoft Magic - i Visual Effects2, ArcSoft Webcam companion 3, ArcSoft Connect and ArcSoft ShowBiz).

  When I turn on my webcam using the ArcSoft program it seems to work fine (I can see and record videos with sound). When I try to use Skype, the sound works fine (there is a microphone on the camera). In Skype, the video does not work and it gives me the message "cannot start video renderer. Make sure you have a valid installation of DirectX.

  I have the latest version of the driver for the webcam, I have the latest version of DirectX (version11) and the latest version of Skype (version 5.0.0.152). I tried to use "ManyCam" program that some people recommended, but it did not work. Anyone else have this same problem? Someone knows how to solve?

  Help, please!

  I think HP has provided an update to the drivers of webcam which solves this problem... and Skype will include a fix soon.

  http://support.HP.com/us-en/document/c02639369

• Installation of driver with PXI-8360 error "this device cannot start - Code 10"

  While trying to install PXI-6541 to the PXI-1036 chassi with controller PXI 8360 [express-8360 side laptop], the error message "this device cannot start [Code 10]" laptop is Lenovo T60 with the latest version of the BIOS

  Thank you

  Manu

  Sounds great Manu,

  I also followed on that for you, then you should be getting approval sometimes today.

  I hope for the best

• Envy 17-j120us: high definition Audio Device, Code 10 device cannot start, yellow triangle

  My IDT audio works fine and its works my laptop well, but when I curls upward from my laptop to my TV via a HDMI cable, I output my laptop displays on my TV but no sound from my laptop on my TV came out. I think the problem is because there is something wrong with my high definition Audio Device. It has a yellow triangle next to him with a! in the middle of the yellow triangle in the Manager of devices under sound, video and game controllers. And when I click on properties on the high definition Audio Device, it says: "this device cannot start. (Code 10) {Operation failed} The requested operation failed. Any help would be great. Is CLEAN Windows 10 installed on a NEW HARD DISK. I HAVE NOT upgraded, windows 10 was clean installed from a disc.

  See if it works...

  Download and install this free utility for files.  The 2nd listed file is 64-bit.

  http://www.7-zip.org/

  Then download and save, but do not run the graphics driver Intel W10 from the support page of your laptop.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72370.exe

  Right-click on the file of the Intel graphics driver you just downloaded and select 7 - zip from the list of options.

  Have 7-zip extract of: and let it extract the file in the file name (sp72370).

  Go to Device Manager and click on the audio device HD of the problem.

  Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart the PC.