Cannot transfer the film to computer images

Similar Questions

• Upstream 13: make a copy of the USB of computer image 13 Stream

  It has come to my attention that the image USB copy that I compiled may not be usable as a way to reinstall windows 8.1?
  I learned that the Scandisc USB flash drives which I used are not designed as a way of copying and for the resettlement of same OS if the disk image I can say copied ok. This has now been confirmed by Scandisc. The question is now how do I make use of the unique copy of my computer image I have on my flash Scandisc disc and what USB memory keys are designed to provide a useful computer image copy?
  I hope someone can advise me on this.

  First of all, make sure that you start from the USB port. On the portable stream you constantly hit the ESC key when you turn it on to bring up the BIOS Menu in the upper left of the screen. Choose Boot Options then choose USB Flash Drive and it will boot to a screen that says select your keyboard type.

  On mine US is by default I chose that.

  Now, click on the button problems. Click Reset your PC.

  Select the target operating system. Windows 8.1 should be there. If it says Windows 10 and you want to come back to win 8.1 choose it anyway.

  Then, after clicking on the target operating system you will see a screen that says: 'This is what will happen', click Next, and then click YES, repartition the disks.

  Make sure you choose the option in the final stage, which said just delete my files. Do not select the option completely clean.

  Wait 45 minutes and your system is restored from the factory.

• Cannot transfer the file to WCS 5508 - Code file transfer failed - unknown error - refer to log

  Hi all

  This is my first time here posting. I have some difficulty to transfer files to my WCS 5508. My intention is to upgrade to

  6.0.196.0 to 7.4. We recently bought 2602i access points and we need to update our controller software so that the controller save the new access points. I also improved the interface controller 7.0.240 WCS software.

  However, I have not been successful transfer the file to the controller for the upgrade.

  I have tried everything I know:

  * transfer the file of different programs including tftp32d and solarwinds TFTP server

  * transfer the file of different applications such as FileZilla and FTPD FTP server

  * transfer the WCS web interface file

  * running a direct connection to the WLC with a static IP address on the interface

  * verified that there are no interfering firewalls with transfer

  * adjusted times waiting and pads as a result

  I get no error message on my software FTP or TFTP, which would indicate something wrong with the applications. I think it is a bug with the controller.

  The transfer reachers about 97MB before it fails.

  Here are the error messages I get when I run "transfer of debug output all" from the CLI of the controller

  I feel I forgot something...

  # #debug transfer all out #.

  * Did not write body

  * Only partial file received: 97086398 bytes

  * 23:55:26.248 Mar 06: ftp operation returns 23

  * 23:55:26.253 Mar 06: tftp = 4, = file_name / AIR-CT5500 - K9.aes, ip_address = 10.5.1.18,.

  MSG = unknown error - refer to log

  * 06 Mar 23:55:26.470: upd_get_code = 4 (target = 33744 msg = unknown error - see t

  O log)

  * 06 Mar 23:55:26.470: RESULT_STRING: % error: file transfer has no codes - Unknow

  error - refer to log

  * 06 Mar 23:55:26.470: RESULT_CODE:12

  * 06 Mar 23:55:26.470: ummounting: DLG = / mnt/applicati

  on

  * 23:55:26.577 Mar 06: finished remove

  % Error: Code of file transfer failed - unknown error - refer to log

  #############################################################

  Here's my output sysinfo sh.

  release of sysinfo #show # #.

  Name of the manufacturer... Cisco Systems Inc..

  Product name... Cisco controller

  Version of the product... 6.0.196.0

  Bootloader Version... 1.0.1

  Retrieving Image Version field... 6.0.182.0

  Firmware version... Console USB 1.3, 1.6 Env FPGA,

  1.27

  Build Type....................................... DATA + WPS

  Name of the system... WCS_01

  Location of the system... G5

  Contact System...

  ObjectID of system... 1.3.6.1.4.1.9.1.1069

  IP Address....................................... 10.1.0.17

  Last Reset....................................... Software reset

  Time system... 0 days 0 h 53 min 10 dry

  Location of the time zone of the system...

  Base boot license current level...

  Current license type Boot... Permanent

  Next time you start level license... base

  Next Type of license to Boot... Permanent

  ###############################################################

  Any suggestions? Am I missing something?

  Well... Since you're WCS, v7.0.x is the only code that are supported for the WCS.  Look here.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/compatibility-matrix.html#18972

  So the trick to this is downgrade to v7.0.x and add the WLC WCS and then go to v7.2.121.0.  As long as the WLC is added and is attached to the WCS, you can upgrade.  If the WLC is not attached, you will never get to add with a more recent version of the code.

  Thank you

  Scott

  Help others using the system of rating and marking answers questions like "answered."

• How can I convert a negative image of the film a positive image in Lightroom 6?

  I've seen a number of online tutorials that explains how you can reverse/return line in the Module development of tone curve by dragging either end of the line, top / bottom for converting a negative to a positive image. This however does not seem possible in LR 6?  So, how are you? (My scanner is able to produce positives TIFF or JPEG of the film I've been scanning, but I would have preferred to edit pictures using Raw DNG files that it produces, which are negative).

  You must click on the small icon in the lower right curved panel to make editing possible.

  If it comes to color film, I don't know how good a conversion that would be, it will certainly color adjustments, because of the orange mask in the negative.

  And a scanner DNG files? I doubt that they will be real raw files...

  You can scan an image tiff with all the cliches and to highlight the present details, and that will be as good as any raw file.

• Cannot transfer the registration or purchase membership (after moving within Europe)

  Hi all, hoping to help.

  I moved from the Ireland to the France.

  My purchases Account and store are always registered as the Ireland and cannot be changed online.

  I contacted Adovè Livechat and told me that they cannot help that she will need to be wound and someone must be in withn contact me by e-mail.

  Problem is I want to take advantage of the subscription Photoshop + Lightroom right away, but I can not do until my account and registered products are displayed as France so I can pay with my French, VAT etc. details credit card

  Let's cross the fingers can help someone or someone from Adobe Store has the answer.

  Hi Cormac

  Unfortunately, we cannot change the country associated with an identification code Adobe you have another email address, that you can use to create a new ID with the France as a country?  We could then transfer your records of product for the new ID & you can then register for the photography program Photoshop.

  Kind regards

  Bev

• Windows Movie Maker-cannot save the film project

  Save movie maker file as a movie file.

  When I try to save my project, I get an error message cannot save the movie to the specified location. This is a short video just a minute and a half or more. I have herd that if you owe a lot of stuff in there it will not save. I cut small pieces of clips and them repeated once or twice more as 3 - 5 times could this be it? What should I do to solve this problem and save it?

  When I try to save my project, I get an error message cannot save the movie to the specified location. This is a short video just a minute and a half or more. I have herd that if you owe a lot of stuff in there it will not save. I cut small pieces of clips and them repeated once or twice more as 3 - 5 times could this be it? What should I do to solve this problem and save it?

  ==============================
  More than likely one or more of your source
  the files are not compatible with Movie Maker.

  See the following article:

  Movie Maker - problem solving-
  "Can't save a movie."
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot control the film loaded

  A friend of mine is having bad controls a .swf which loads it into his film.
  
  This.loader_mc.loadMovie(_root.prAbsPath+"/360_"+vehicleName2+".swf");
  loader_mc.loadMovie ("360_fusion.swf");
  loader_mc.vehicle360.stop ();
  Stop();
  
  Thus, it is load the film 360_fusion.swf in loader_mc and then try to stop the movie to play... but it will not stop.
  
  Anyone see something wrong with that? He asks if I can help.
  
  Thoughts?

  You must wait until the loading is completed to control the loaded swf file.

• Cannot transfer the photo

  I can't transfer my photos from my phone to my computer. I can visualize very well on my phone, but as soon as I move into my computer the images are not all valid and I can't see more. I've only tried with pictures that I took with the camera on my phone, so I don't know if this applies to the images uploaded as well.

  I searched the forum and it seems a few people came across this or something similar to this, but I did not find a definitive solution that does not require to go online with my phone.

  Did anyone figure a way around it and what could be the cause?

  I'm having the same problem. Yes, the encryption is enabled. I found that if I connect via sync windows media rather than the usb mass storage it connects properly.

• BlackBerry Curve 8900 smartphones cannot transfer media from my computer

  I have a Curve 8900 without SIM card I use strictly offline and via Wi - Fi. (No cell connection)

  When I plug it into my computer with a USB cable, it syncs email, contacts and calendar with no problem at all.

  However, when I try to transfer music, photos or videos to and from the BB, I get a message saying "there was a problem so he tried to connect with your smart phone BlackBerry." He then proposed the link "troubleshoot my connection.

  If I go into the "Device Options" section of Desktop software, I can check the "Organizer" or boxes "my computer's date and time...» ' under 'Synchronize' but the 'Media' checkbox is grayed out and cannot be verified.

  The phone does not have a memory card or SIM inside.  Do I need one or two of them?

  How can I get this unit to connect correctly to the computer?

  Thanks in advance for any help!

  Bought a MicroSD card for it today - runs like a champ!  Thanks for the help!

• Windows 7 cannot see the Windows XP computer to use the printer

  I have 3 computer at home 2 desktop computers and a laptop computer. I upgraded one of desktop and laptop for windows 7. The computer that has still XP cannot be upgraded, but has the printer connected to it. The desktop and laptop w / Windows 7 on them can see the XP computer on the network, but that the Bureau connects and can use the printer. On the laptop is can he sees, but cannot connect, I get this message

  "Error code: 0 x 80070035.
  The network path was not found.

  In troubleshooting, it says "windows cannot find a computer or a device", but you can clearly see in the network.

  Hi moorebounce,

  If you use Norton, McAfee, Trend Micro or Kaspersky I.S., make sure sharing files and printers turned in THEIR Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall) or you can temporarily disable the firewall and check.
   
  Similar question was dscussed in two threads below. The threads below we have answered for Windows vista and Windows XP, but they are good for Windows 7 as well.

  Follow the suggestions posted by Nicolas GMicrosoft support, Moderator on Wednesday, August 5, 2009 02:01
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/e30f3ab0-b6cd-4610-A579-92abcb520f4f
   
  James-Support EngineerMSFT, moderator Saturday, June 6, 2009 18:48
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/7846fdb1-AE66-467e-887d-0a981e6668f6
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot get the film loader to work

  I have trouble getting my animation Flash loader file works. I created 3 movies test (1.swf, 2.swf, 3.swf). Each of the test file has long been a second. Everything they do is display a number. In my loader file, I load the test files a second part. The first two movies load very well, but instead of loading the third film the charger makes a loop to the first image and start again. The last film is ignored even when I place the order. For example, 3. SWF does not charge for 1-2-3, and does not load swf 1. 3-2-1. here is the actionscript code that I used. Anyone know how I can fix this problem? I am using Flash CS5. Thank you

  Stop();

  unloadMovieNum (1);

  loadMovieNum ("1.swf", 1);

  **************************

  Stop();

  unloadMovieNum (1);

  loadMovieNum ("2.swf", 1);

  **************************

  Stop();

  unloadMovieNum (1);

  loadMovieNum ("3.swf", 1);

  The reason why I'm a little confused, you're not using stop(), so I wonder how your timeline is to progress beyond. The loaded SWF files needs to communicate with the main timeline or your main timeline look the _currentFrame of the clip loaded into waiting so that she reaches _totalFrames.

  Here is an example (sans-stop ()) in saved AS2 until CS5 (I can't go lower) who did what you describe and works perfectly fine for me:

  http://www.ERTP.com/tmp/LoadMovieNum.zip

  Is there a difference between that and what you do, and this simple example works for you?

• How to change the settings of computer Image virtual using VI SDK 4

  Hello

  All the

  I just wanted to know how to change the setting of Image of computer virtual using VI SDK 4

  Setting virtual machine Image could be (memory setting etc.)

  (1) Yes (If yes or no do you while the virtual machine is online is totally based on the question of whether the operating system supports or not)

  (2) I don't know what ' TTL you are referring?

  I would say take a look at the previous documents, I've linked to familiarize yourself with what you can do and another great reference point is the vSphere API itself doc: http://www.vmware.com/support/developer/vc-sdk/visdk400pubs/ReferenceGuide/index.html and make use of Research to see what properties/attributes are available on the entities/objects.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• cannot transfer the original message or a response

  When I get an email and want to transfer I get only a popup window I've ever had. This window is not sending or the command toolbar forward.
  I think I've accidentally changed some format but do not know how to fix it.

  I have no idea what popup you speak. When you hit the answer you should get a window open entry with the quoted original message or not depending on how you have your account settings define.

• Cannot hear the songs on computer in iTunes

  10 64-bit Windows

  iTunes 14

  I have a new computer (that I have authorized) and I can't hear playback songs in iTunes. both with a headset or a bluetooth speaker.  I then hear 'system sounds' in iTunes, but, again, not music.  The iTunes volume control is functional and completely turned upward, as well as the icon for the audio control device in Windows.  I am able to hear the music in other applications (e.g. YouTube).  Any advice or assistance would be appreciated.  Thank you very much.

  Try to use Ctrl + B to activate so hidden menu bar, and then use Edit > Preferences > reading and look at the entry for Play Audio to help. This should normally be set to Sound live or Session Windows Audio. Change to the other setting can help.

  TT2

• Cannot transfer the data of the CR to the host using FTP

  Hello

  Save us from our experimental data in a folder in the CR (pxi-1042 to the pxi controller 8108 RT). Retrieve later us the data to our host for analysis. Now, we used to regularly used to make new folders in RT to reduce the time of llop to read the files in the host, but somehow the data in particular folder has increased due to the more experimental campaigns.

  Now the given folder has become inaccessible, we tried to get the data using FTp methods like browser, orders msdos, but nothing has worked so far

  We tried to connect n a USB to the RT controller and tried to transfer files on it, but the performance of the VI RT disconnects. (although we are bale to access other folders)

  This folder has our important experimental data, so it is crucial to get your hands on it.

  Please suggest what options exist.

  Thank you very much

  Thanks a lot for your answers. We gave a lst test by inserting a USB hangs in the RT controller.

  We then programmatically regularization RT drive on USB data. We were able to achieve and could get the data.