Cannot update the drivers on the XPS 8700

Similar Questions

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• cannot update the drivers on the Pavilion dv6-6185tx

  Hi, I'm in serious trouble trying to update my drivers, I have an AMD HD6770M switchable graphics GPU that I know I need to special of HP drivers, but I can't seem to find my machine on the HP websoite, I have a Pavilion dv6-6185tx and I can't find it on the products update page the product number is A3U63PA #AB5 but that entering the page drivers & updates produces no result. I tried to use HP auto detect but I can't find any HP product, even when I use a HP laptop to run the auto detect! It is extremely frustrating, can someone help me please.

  Hello

  You will find your notebooks Product Page here.

  Windows 7 (32-bit & 64-bit) switchable graphics latest drivers are at the following link.

  AMD Switchable Graphics Driver - Windows 7.

  Kind regards

  DP - K

• Cannot update the 10 latest updates to the system

  When the system downloads 10 Vista software updates, it goes through all, but then, when it restarts I get a reboot error.  It cannot solve the problem, and I have to do a restore to an earlier date.  I tried several times to make the installation of the download, but whenever he fails.  How can I solve this problem?  Running on the Dell Studio XPS.

  Change your automatic updates to inform you.

  Download the updates one at a time, until you find the problem one.

  Do a restore again if the problem recurs, then repost with the number of the update.  Mick Murphy

• Qosmio G30 PQG31E - no driver XP 32? Cannot update the BIOS?

  As usual, obtained a computer laptop, but no recovery CD :(

  Got 32 installed XP (my Microsoft contract does not MCE) but a lot of missing drivers. Driver Toshiba page has all the drivers for XP MCE, XP 32 has only BIOS update, Bluetooth, HD - DVD firmwares, the virtual sound and drivers WI - FI!

  So I tought "Vista on this issue", but I checked the compatibility XP with Vista DVD I got a 'need to update the BIOS' (always a 1.40-2006/03/10)!
  My problem is that BIOS update always returns "this computer is not supported! Laptop has only one account, this isn't permissions problem, perhaps because many drivers are not present? Can I update the BIOS in safe mode?

  What now? Am stuck with a brick of Qosmio? Without controllers LAN to say the least, I can't not fact! Drivers XP MCE does work on XP 32?

  Any thoughts?

  Hello

  I found all the Win XP drivers for Qosmio G30 PQG31E!
  On the European driver Toshiba page, you can find the Win XP MCE drivers
  XP MCE drivers are the same drivers for Win XP Home or Pro.

  There are also some BIOS 3, 90-WIN and this BIOS is operating system independent. In other words, it works with Win XP and Vista...

  To update the BIOS the common Module must be installed
  You can find also on the European driver Toshiba page!

• Missing CONTROLLER of BUS SM driver. Cannot update the driver... Help, please...!

  Product: HP 2000 2116 you

  OS: windows 7 (home edition) 32-bit

  SM bus controller driver missing... Yellow exclamation mark in Device Manager...

  Cannot update device manager by connecting to the internet.

  Hello

  Download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  After the installation is complete, restart the laptop.

  When windows has reloaded, check in Device Manager - if you still have the error message, download and install the following.

  Intel Management Engine Interface.

  Kind regards

  DP - K

• cannot update the system... error code 80070005 appears?

  have tried several times to automatic update window system, but windows cannot verify the updates and the aboe error code appears... also tried the fix online tool without success... of advice would be appreciated... thanx

  One of the most common causes of this error code is the Anti Virus and Anti Spyware software running on the computer.

  You can try to disable them, and then try the updates again. Keep the firewall however.

  Recommendations for computers that are running Windows Server 2003, Windows 2000, or Windows XP Antivirus
  http://support.Microsoft.com/kb/822158

  How to reset security settings to default values
  http://support.Microsoft.com/kb/313222

• Windows cannot update the 80004002 error code.

  OT: Windows Update.

  I continue to receive messages that Windows cannot update and the 80004002 error code but I put t understand where to go from there. Help!

  Moved from Vista to install, upgrade and activate Forum.

  http://Support2.Microsoft.com/kb/943144/en-AU

  Method 2: Register the Wups2.dll file

• Description of the XPS 8700 Audio ports

  Where can I find a detailed description of each audio port for an XPS 8700?  The docs I found so far are unnecessary: "four audio output ports / headset" tells us nothing.  These manuals can be dumbed down many more!

  Hi Steve,.

  Here you go:

  

  And to answer your last question, no, I don't think so.

• HP Active Check Plugin crashes - cannot update the HP BIOS

  Trying to get the HP Web site scan my computer to update products installed but I can't, because of the continual crash of the Plugin HP Acive check. The error at the top of the page reads "broke down the following plugin: HP Active Check Plugin»  And an explanation of the error says "HP a Local Mode job control works already." Please try again later. »

  I uninstalled the plugin and reinstalled several times, stopped the process in the Task Manager, disable my firewall... nothing helps.  I need to update the Bios. What is the problem? Is there another way to update the Bios?

  US - Bios-Hewlett Packard - HP F.20 (13/10/2009)

  Intel Core 2 Duo processor T6600 CPU - 2.20 GHz, 2200 MHz

  HP G71-340US Notebook PC Windows 7 / 64-bit P/N VM114UA #ABA

  New 750 GB HARD drive, installed OS via Recovery record 5 days.

  Browsers: Google Chrome (also have IE 9, Safari)

  Hi again,

  Announcement 1

  Try Internet Explorer Chrome instead.

  Ad.2

  Here is the direct link to the latest Bios for your model.

  Ad.3

  You can check the link below too:

  Using the tools of Support from HP to update of BIOS, drivers and software HP with Windows 7

  Note:

  Caveat!

  Update the BIOS is still very risky. Your laptop may not start after this step, so be careful and have complete patience. You will perform this update at your own risk. I take no responsibility for any problem.

  The update of the Bios?

  First check what Bios version, you now have. This information can be very useful if ther will be any problem.

  Connect the laptop to the power running.

  Disconnect from the Internet. Out of all the programs you run. Disable anti-virus and firewall.

  Run the Bios update exe file. It may take some time. Allow the laptop to restart after applying the BIOS update.

  Although this update is running are not:

  • Turn off your laptop,
  • disconnect the power supply,
  • try to run any software or do anything thereon.

• Windows cannot update the configuration to start the computer. 'The installation cannot continue.

  W-xp-Prof sp3 running on a Dell Dimension 8400 with Intel 925 x / xe chip set.  I updated the BIOS and chip set his configuration of Dell and still get the error.

  Where in the list of stall could find and log events or error log that might help Tech ID my problem?

  I put aside as much as possible of the preliminary questions, but most of them have been directed against Vista to W - 7.

  I chose a "custom" with 32-bit software installation.  I wish not clean install.

  Upgrade Advisor's report is clean except for dial-up software not used.

  I use Windows Easy Transfer which worked well once I deleted the 'unknown' accounts and remove old ' my documents' which has all the ' 7 / "vs" 6 / ".»

  I think the problem might be in the registry.

  I was using my account to user mode Adm.

  1. I would be in the account "Administrator"?

  2 error log?  (scan but not found)

  (not a good 4th)

  Any help or pointers would be great.

  Update chipset from Intel allowing old drivers for the e/s SATA RAID controllers.  Is gone to 7.0.0.1020 and it worked, Windows 7 running.

• SRM INstall - cannot update the Installation of Perl directories.

  I get an error when I try and install SRM. Sometimes almost to the end and then an error occurs stating.

  Failed update installation directories Perl.

  Details:

  Cannot open the 'C:\PROGRA~2\VMware\VMware' perl script: no such file or directory

  Press Retry to try again or Cancel to exit the installation.

  Environmental specifications are:

  I'm on a Windows 2008 R2 VM with SQL 2008 Ent R1 64 bit installed.

  1 vCPU

  2 GB OF RAM,

  C: 40GB,

  D: 10 GB

  Used Installer - Vmware srm - 4.1.0 - 267817

  I want to install to "C:\Program Files (x 86) \VMware\VMware vCenter Site Recovery Manager\.

  * Note that the difference between the installation path and the path of the error. The installer is truncating the directory path.

  I tried to install to multiple locations, including the D: and also change the names of directory structure thinking the lengths of inventories had something to do with it. Whatever the names of directory, the installer truncates the path.

  I use the installer with administrator privileges (R, click Run as Admin) and have also tried to run the installer in compatibility mode.

  I also tried to solve the problem using the suggestions located below with no luck. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1023191

  Someone at - it ideas? I searched high and low and havn't found a solution.

  Thank you

  JKasal

  Try turning off the UAC (User Account Control). :

  1. start, click principally made programs, accessories, click Run, type secpol.msc in the Open box, and then click OK.

  2. If the user account control dialog box appears, confirm that the displayed action corresponds to what you want and then click on continue...

  3. in the local security settings console tree, double-click local policies, and then double-click Security Options.

  4 scroll down and double-click user account control: run all administrators in Admin Approval Mode.

  5. Select the option disabled and then click OK.

  6. close the local security settings window.

  HTH

• Tired of the XPS 8700 gel every day

  Hi all

  I've had my XPS 8700 for about a year now and soon the appointment I got the same problem: the machine hangs just after a couple of days, or sometimes even two or three times in one day and then I have to press the power button to restart.  I'm tired of this, why should a machine that I paid a lot of money to continue to do this?

  I recently formatted the machine and re-installed everything - and nothing has changed, it just went directly back to gel every day.

  I am running Windows 8.1, all solutions you guys would be appreciated.

  Micron is usually good enough. I guess you looked at all slots and they are all Micron and schedules etc. are all equivalent.

  If all else fails, I can lend you a hammer...

• Portege R700 - cannot update the BIOS

  Hello
  I recently bought a Portege R700 19 M and I downloaded the latest BIOS version available in the Toshiba support page and when I run the .exe file, it does not work with this message: "the computer is not supported.
  And when I look in the HWSetup Toshiba tool, it does not display the BIOS version but some weird characters (letters not usual) so I can't find out which version is installed.
  Thank you for your help

  Hey Buddy,

  You update the BIOS to the version preinstalled Windows from Toshiba?
  Are you logged on as administrator when you try the update?

  To be honest I doubt a problem to update the BIOS because I found other threads where users report that BIOS update was successful.

• Tecra M3 PTM30E - cannot update the BIOS

  Hello

  I can't install my new Bios on the Tecra M3 PTM30E-09X01LEN system.
  The message says: not supported.

  Why?

  I put t he understand.

  Hello

  First of all, I want to ask you why you want to update the BIOS?
  You have some problems with the laptop that could be solved by the BIOS updated?

  Also what BIOS you use and where did you find and download?

  The Tecra M3 PTM30E seems to be a European model and the BIOS must be placed on the European driver Toshiba page.

  I checked the page and there are two versions of the BIOS;
  BIOS 1.20 - WIN-FBCF is only for the models with filter virtual control of Angle (FBCF)
  The BIOS 1.50 - WIN is for models WITHOUT filter the virtual control of Angle (FBCF)

  Seems that you used the wrong BIOS!