Similar Questions

• Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 (KB948456 - X 86) on a laptop Vista Home Premium 32 bit SP1 with all updates of Windows installed.  Quickly fails after it starts with error 0x800b0100 in the system log.  It's a fully verified SP2 full download.  I did a full chkdsk /r who fixed some issues.  Removed AVAST.  A running Fix It tool that fixes the problem with crypt services.  Scanned for malware with MRT.  Scanned for malware with MalWareBytes.  Scanned for rootkit with the McAfee tool.  Run the sfc/scannow, that signals mistakes.  The CBS. Partial contents of the LOG file (see KB972036):

  2014-03-18 11:59:36, CBS NonStart info: success, start, treatment not required, as expected.
  2014-03-18 11:59:36, info CSI CSI 3222024 (0x00312a08) store initialized 00000005
  2014-03-18 11:59:36, CBS Session info: initialized 30360259:262197728.
  2014-03-18 11:59:37, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
  2014-03-18 11:59:37, CBS Session info: 30360259:262197728 finalized.  Reboot required: no
  2014-03-18 11:59:37, CBS Session info: initialized 30360259:266957728.
  2014-03-18 11:59:38, CBS brand store corruption flag because of package info: Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0. HR: 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPICbsClient::EnumPackages:156) cannot open the package hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list hr = 0x800b0100
  2014-03-18 11:59:38, CBS Session info: 30360259:266957728 finalized.  Reboot required: no
  2014-03-18 11:59:38, info CBS SPI: could not enumerate the packages CBS
  2014-03-18 11:59:38, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2.

  KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18005 hr = 0x800b0100 store

  System will not install KB972036 - States does not apply.

  Referring to 956702 KB notes that the http://go.microsoft.com/fwlink/?LinkId=167357 link that needs 32-bit is 64-bit.  In addition, it specifies SP2 - which obviously I do not have.  But I manually downloaded the apparently correct tool and ran it - get does not apply.

  Hi John,.

  Apologize for the delay in response. Please try the steps as described in the following article:

  Windows Update error 800b0100

  Back to us for assistance.

• How do I enter usb storage away from home?

  I would like to access my usb storage away from home since Ios and android devices

  I googled and have not been able to find info.

  Thanks adavance.

  In addition, you can also see these articles for more info on the EA4500 router.

  Linksys router Smart Wi - Fi, EA4500 frequently asked questions

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=f61db959480e4c5ca31657cea9355fad_EA4500_Frequentl...

  Get to know the router Linksys Smart Wi - Fi, EA4500

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=37df66468156452ab820c9e200690f08_Getting_to_Know _...

  How manually update the firmware on the Linksys WiFi Smart router

  http://homekb.Cisco.com/Cisco2/UKP.aspx?VW=1&docid=a3a56a63d7fe440da177b1b8d186f40e_How_to_manually _...

• NSLU2 - cannot connect a network - xp home sp3 drive

  Hello!

  I have a network of two xp machines connected to a wrt54gl router (dhcp) a xp pro and XP home.

  I bought a NSLU2 unit. I successfully set up according to the instructions of a xp pro machine with a USB plugged into the port of disk1. It shows on this fine machine as a network device, as well as two shared folder (admin and disk1) without further delay. (A minor hiccup: I tried to serve as a dhcp client, but I couldn't for some reason, but it works very well with fixed ip.)

  However, on xp home, I can't connect at all. It does not appear in the My network, cannot connect to it with-. I can see the device in my work group, but that's it, if I click on explore, it hangs for a while, then gives a "no access, no doubt you have no authorization" error.

  I can still access it from the web interface, but otherwise no luck.

  I tried to create a user on the NSLU2 web interface with the same name as the users private XP, without success.

  Someone has an idea what to do?

  There is a resounding slap on my forehead. It was through the firewall.

  (Although now, I do not understand, how NSLU2 forced on another machine with the same parameters...) I just had to add the slug of the IP of the zone of confidence.

• Cannot send my videos at home.

  Whenever I try to send a video at home, I took, it asks if I want to send with the mailbox or just send it. Neither work. These videos are from 20 to 30 seconds! It is said many times there is an error or the file is too large for the server. As iOS 9 update, no longer has the ability to cut size to send a video, but it should not matter since the video is 22 seconds. What is the problem and how to fix this? Very frustrating not being able to send my videos! I use an iPhone 6, it is up to date and use Verizon. Thank you!

  Hello piprchk,

  Thank you for using communities of Apple Support.

  If you have trouble getting an error by sending an attachment, you can check the size of the file you want to send. The limit is not based on the time of the video, but rather the size of the file.

  Limits on sending messages

  There are several safeguards in place to ensure that only iCloud members can send messages using iCloud. One of these safeguards include reasonable limits on:

  • The size of incoming and outgoing messages (20 MB, up to 5 GB with mailbox ) enabled

  The size of the mailbox and the message sending limits in iCloud

  Mailbox limits

  Attachments cannot be sent using mailbox if they exceed these limits:

  • The message, including its annexes, is higher than 5 GB. Try to send the content of your message in several e-mail messages or compress your attachments to make them as small as possible.
  • A uncompressed file is attached to the message. Follow these steps to compress your attachments.

  Mailbox limits

  Best regards.

• DCR-TRV260 NTSC via USB for Windows XP Home edition home

  Hello!

  I'm trying to help a friend to connect its DCR-TRV260 NTSC to his computer HP Vectra VL420 (Yes, a very old machine).
  The computer is HP P/n: PS660AV #246, with a processor Pentium 4 (Willamette) of 478mPGA socket @1. 70 GHz, installed on a HP
  card system with an Intel i845 NB A05 and and Intel 82801 SB, the latter is, I suspect, the culprit.
  We lack a clean new install of Windows XP Edition family with Service Pack 3, with 384 MB of PC133 SDRAM.
  I know it's something Museum but hey, it works and it can not even buy a more recent machine.

  The problem: I can't do the camera be considered a via USB removable storage device, in order to download still images on the computer, he recorded on tape, not a stick of memory, there no card IEEE1394 and no budget to buy a.
  I installed the software included in his CD that comes with the camera, and I can work
  streaming USB tool and watch motion pictures and still images through it, but I can not D/L to the computer.
  I removed all the foregoing, as well as all instances of the camera Device Manager, then set up PMB56_installer1108a, to my dismay, because he wants to only use IEEE1394 (I understand why, but it should offer the USB option).

  How we manage to always download these images, recorded on tape, on his computer?
  I suspect the Intel 82801 SB is at fault, because even if it does not detect the camera and every time I plug it, Device Manager
  updated to reflect the three instances related to the camera, the Sony imaging device, digital video USB Composite and Audio USB
  Device, it cannot be seen as a removable storage device.

  Of course, I read the manual for the camera and the computer application s/w, but I can't find anything related, none of the people
  two elements indicate how do what my friend waiting!

  I read all the messages mentioning USB as a search term, and the question is: is WXP just incapable of such a feat?

  Help, please.

  Hello!
  After all this time, I discovered the answer to watch me on page 25 of the PDF manual camera operations.
  They are not always photos within the meaning of the word "cybershot", they are
  still images recorded with sound, then it's just a frozen video image recording with
  seven seconds of audio.

  Now we have captured it with Windows Movie Maker and export it somehow to jpg still images.

  Thanks anyway!
  (Someone has already read the post?)

• Connect a printer HP Laserjet 4 parallel via USB using Windows 7 Home Premium 64-bit - HELP!

  I have a new Dell PC (Windows 7 Home Premium 64-bit) that does not have a parallel port to connect an old HP Laserjet 4 printer.  I bought a USB to parallel to connect the PC to the printer.  When turn on/off the printer, W7 installed an IEEE-1284 controller that appears in the unspecified list of devices in the control panel.  I "Has added a new printer", select "USB001 virtual printer USB port", then choose the correct printer driver (after "Windows Update" get a longer list).  When you try to print a test page, the 'ready' light on the printer starts to print, but nothing else happens.

  After experimenting with different settings, I was able to get a page to print that says "* s1M.  I don't know how it happened or what it means.  This suggests that the PC is 'talk' to the printer.  However, I was unable to reproduce this.

  HP support was able to help me, and I've been searching for an answer.  Someone at - it suggestions?  I wouldn't give up using a "workhorse" reliable printer for years. "

  You do not have a parallel port on the machine.  Whatever it is sent to the parallel port device should fail on writing.   Change the port to the port of USB00n, created when you plugged the cable.  You will see the port listed in the list of ports.  This will usually USB001 when you have not all printers attached otherUSB. Alan Morris Windows printing team;

• Key USB and Windows 7 Home premium

  My laptop is running Windows 7 Home Premium.  Bought a new stick of memory: Kingston DT101 G2 16 GB USB2.  When I connect it to the USB port makes it sound, I get a small icon memory stick right background, if I go to devices and printers he recognizes her as a generic "USB 2.0 Data Traveller" and if I take that he recognises that he is gone.  HOWEVER! It came not my thing I can save in. When I look on properties it comes up with three sections:

  Kingston (UMBus enumerator location)

  Kingston Data Traveler 2.0 USB Device (USB Mass Storage Device location)

  USB mass storage device (location Port_ #0001.Hub_ #0008)

  When I right click to browse the files it is shaded on.  within days old (!) I would have changed the drive but I don't seem to be able to do.

  Help, please!

  Connect the player to a Linux machine, open disk utility and reformat the drive in FAT format.  It's crapware on the drive of Kingston and Windows Defender or your antivirus software blocks the function of the training because of the behavior of the crapware.

• My computer is on a network, but Windows 7 (Pro x 64) shows that it is not. Cannot change network location to home. Cannot use the homegroup.

  I'm putting my network (with homegroup) home, but when I go into control panel > network and Internet > homegroup, it says:

  "This computer cannot connect to a homegroup." Then,

  "To create or join a homegroup, network location of your computer must be on home."

  Okay so. I go to network and sharing Center and click on "connect to a network" and I get a box in the lower right corner that says "no connection available.

  I find that strange, because when I click on 'My Computer', I see in the left pane all the computers in my house under 'Network'... so I'm in network... but I'm not?

  It is a problem because until I am able to add this computer, I am unable to share the data on this computer and it is my office alone AND the pc is connected to my router.

  I can not access my storage drive. I can't stream media.

  All opinions are appreciated. Thank you.

  Hello

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  It still does not work, try this too.

  Firewall software.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall Windows Firewall should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly, or uninstall it completely allowing the clean flow of traffic on the local network. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Reset the network stacks .

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP, just replace the command typed with.

  netsh int ip reset

  Restart the computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot find synchronization on the home page settings

  I'm following the instructions on how to synchronize:
  "Do this in Firefox on a computer that already has your sync account, put in place.

    1. Click the Home button (or type about:home in the location bar) to bring up the default Firefox home page.
     2. At the bottom of the home page, click the Sync link to open the Sync settings window."
  

  PROBLEM: THERE IS NOT A LINK OF SYNCHRONIZATION ON THE DEFAULT FIREFOX HOMEPAGE. THIS IS WHY I'M UNABLE TO OPEN THE SYNC SETTINGS WINDOW AND COMPLETE THE SYNCHRONIZATION PROCESS WITH MY ANDROID.

  Topic: home page which shows the screenshot has a sync button in the launch at the bottom.

• Re: Satellite L750-1XH - cannot use pre-installed Win7 Home Premium

  At the start of the laptop without accessing the past named screen user except in safe mode. User name of affected the screen goes black.

  Any ideas appreciated, wife is an attempt to do for College this week!

  Your ad is quite confusing and I don t understand exactly what is happening. If I understand right, you cannot use Windows, but you have full access in safe mode. Is this correct?

  In any case try to follow: start Windows in safe mode and try to roll back OS to an earlier time using System Restore tool. Do the first step, check what happens and post comments.

• NVidia 7900 driver cannot install on Windows XP Home edition

  Hello!

  I have a strange problem. When I am trying to install new drivers for FX 7900, it says hardware not found. The computer works well with adults, but I want to update. Could someone help me? Thanx, Stepan

  Or you can try the omega drivers, which is also a very nice page for videodrivers:

  http://www.OmegaDrivers.NET/
  OmegaDrivers.net - home of the Omega Drivers for desktop/laptop ATI & NVIDIA cards.

  Their INF´s are modified so that they coincide on mobile systems...

  Have a nice weekend

• Spectrum HP notebook: New HP Notebook's spectrum cannot connect to wifi at home

  Just bought new notebook spectrum, tried to connect to the wifi at home, entered security code (that's my 10-digit phone number) and it connects, says: "Unable to connect to this network."

  I'm typing this now on the old computer connected to the network.

  Tried everything suggested, including reinstall them the driver, restart the computer, etc..

  Figured it out: reset my modem wireless by entry into the administration of the modem using my IP, not exactly what I did but it changed the SSID of "Babylon" to "Babylon 2" even if the administration still shows as Babylon

• HP Envy Tablet - cannot connect when away from home

  With Windows 8.1 now, I had to put my login compressed to use MS my account login & password. Works fine at home with wifi BUT when off site and no wifi, I get the message mentioned by a few others "... not ... ne pas connecte connected to the internet, use the previous password...". "or similar. However, the previous password connect in both. Please can you help me?

  Thank you.

  Hello CoconutNZ,

  When you say you "had to put my login compressed to use my MS account login & password", was it necessary for work or do you only do this because you didn't know how to create a Local (not MS sign-in required) account?

  Would be using an account Local rather adapted to your needs?

  I can only think of a couple of things to try.

  1. change your connect you to use a PIN instead of a password help?

  The user account - create a PIN in Windows 8

  2. If this does not work, switch to a Local account.

  How to move your existing Windows 8.1 log-in to a local account - CNET

  Or you can also create a new Local account and move your files from the old account on. Then delete the old account.

  Create a user account - Windows help

  Does that help? Otherwise, I wouldn't know how to fix the broken MS connection problem.

• Cannot get on Internet at home

  I have two laptops at home, the two Dell, same system and configuration.  Initially, they both had McAfee on them.  Now we have McAfee and there your software.  The problem is one of the laptops will not get on the Internet at home.  I can get into any other thing but not at home.  The other laptop has now no problem.  Any suggestions?

  I move your message to the Windows forum for networking topic.

  The only impact of MSE would have on the PC it is installed on networking issues would be if you do not have to completely remove McAfee using McAfee utility software to delete linked from here:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  It is not likely to be the problem, however, given that the PC can access the Internet when docked elsewhere.

  My suspicion would be a defective router or misconduct. You have rebooted or power cycled the router? Do you have confirmed that your ISP is not having a problem in your area assuming that cable or DSL is your connection at home?

  -steve