Canon IP2600 driver and Windows 8

Similar Questions

• HP EliteBook 850 G3: No audio for no built in speaker and headphone with jack after driver and windows update

  Hello

  I just made some updates driver and windows (windows birthday) and after installation I have not any sound with the built-in spaker or with my headphones plugged with one taken more. But with a usb headset it works!

  When I go to the window of Windows playback devices there is no device present.

  I already update the Audio drivers and reboot to run the tool in solving audio problems in Windows, but nothing new, it does not.

  Gauthier

  Hi Gunthar,

  Give the driver following a shot

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

  This driver solved the same problem we had with our Elitebook 840 G3

• HP Pavilion s5715: replace the internal hard drive and windows 7 & OEM

  Hello world.

  I use a PC HP Pavilion Desktop s5715 with windows 7 Home premium x 64. The internal hard drive is a Seagate (ST1000528AS SATA/300 7200 RPM). I recently received messages when windows starts by saying that "the hard drive failure, is imminent. Check the disk with CrystalDiskInfo told me he had a problem with the reallocated sectors count & number of events of reallocation (with the values 1, 1, 36).

  So now, I want to replace this with a Western Digital Black 1 TB internal drive, and I want to have Windows 7 onto the new drive. I had 3 HP recovery disks (burned on DVDs). I also had a D drive that says "HP_Recovery.

  1. can I replace the Seagate SATA/300 with a WD SATA/600?

  2. my HP Pavilion s5715 does support the new internal hard drive?

  3. how to install windows 7 on a new hard drive? Can I use the HP recovery discs? Some forum posts on the internet say something OEM Windows 7; I have no idea what it is and if I got it. Or should I use a program like Acronis to clone my hard drive to the new? What should do? Thank you

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the side, back or bottom of the computer. Please, do not include the serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  1. can I replace the Seagate SATA/300 with a WD SATA/600? YES

  2. my HP Pavilion s5715 does support the new internal hard drive? YES

  3. how to install windows 7 on a new hard drive? Can I use the HP recovery discs? YES, you will need to use your HP recovery disks to return the computer to a factory State.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• How do I dual boot windows 7 a physical drive and windows server 2008 R2 to a second drive

  I bought a new 'high-end' and want to leave the current WIndows 7 Home Premium (64 bit), as is.  I want to install a second drive hard and on this new drive, install WIndows Server 2008 R2 so that I can run hyper-v.  I know I have to edit the BCDEDIT, but EVERYWHERE I look for help on this subject, he refers to a virtual hard disk... I don't want to run Server 2008 from a virtual hard disk... but rather a native installation.  Is this possible... If yes HOW?  I know he's probably changed since the days of WIndows 2000 and WIndows 2003.

  Hello
   
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

   
  I hope this helps.

• How to install the new hard drive and windows key?

  Hello

  I have a aspire v5-121-c72g32nkk.
  I have just updated to Windows 10, don't panic, but I want to upgrade my HD drive to a SSD drive.

  You can find the steps to do this?
  Windows was preinstalled, how I reinstall on another drive?
  I have no serial key or whatever it is.
  I'm a bit lost, you have an idea?

  Best,

  There are several ways to do this, anyone have product keys, since

  If you want to do a clean install:

  Windows 7-8 - 8.1 keys are embeeded on your BIOS

  Windows 10 use a generic key during the upgrade, so just skip the steps questions about a product key and the first time you connect on the web, it will authenticate to.

  You must decide:

  (1) do a clean install of your operating system to factory

  (2) make a disk - image of the system image and reload

  (3) to do a clean install of windows 10

  option 2 is the fastest at the end, as you create a copy of your HARD drive and reload it to your PC.

  you need a bootable windows 10 (USB or DVD) media and little space on external HARD drive.

• Having trouble installing new drivers after installing a new hard drive and Windows Vista.

  I just installed a new hard drive on my computer of dell inspiron 1525. I managed to do it and it worked. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However I couldn't connect to the internet. I understand I'm missing some drivers but I rebooted the computer, but it goes to the black screen asking you to start in safe mode, safe mode with network, normally and something else. But after trying all of them, it goes straight to this same screen. What can I do? Or I can clear the new hard drive and start over? Any ideas?

  original title: new installation from hard drive problem

  Hello

  I suggest that you run the Startup Repair tool and check if it solves the problem:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I suggest Download driver network card on another computer, and then transfer the file using any flash drive and even install in the computer you have challenged.

• Belkin router low with USB for storage drive and Windows 7 do not get along?

  Hi all!

  We have a Belkin N wireless router + with a USB stick 'slot' in the back with the rest of the cables. The USB option is actually the only thing that made me buy the router in the 1st place! Anyway, it does not work when connected to the router, even if the network is running perfectly. It is a Seagate external hard drive and when it is plugged it's high lights of the page, there is no power cable so that it can be plugged into the wall. NTFS system I think. I use Windows 7. I tried so many different things, trying to connect this dag on drive to the router, I've exhausted all efforts, it seems. On belkin under my model site there a Belkin Storage Manager, but there isn't even a request, is just a plateau that is located on the bottom of my screen, the only thing I can do for her, is shut, it is the only command that opens. Oh and the website says also I can enter my routers address in IE followed by a slash and the name of my seagate... the drive is H, so I tried different versions of H:, tried FreeAgentDrive, etc...

  .. I think it is a windows problem, b/c not only not Seagate turn on, under the watch USB (via IE, default routers page layout), the connected router settings. In addition to the light on the front of the router is 'active', blue and work.

  HM... I run windows 7 Professional / 64-bit / don't know not what other information I have to give... I don't think that the external hard drive would have it's own IP address when you are connected to the router... could it? Also, my service is comcast with dynamic IP address assignments... so it would not stay dry alike... correct?

  Oh, and the external hard drive works wonderful connected directly to my laptop and an XP computer at work... so router maybe not is not talking computer properly the drive... I should have some sort of security "allowances" on this drive until I put it on belkin?

  I'm sorry this is a NOVEL, someone help please? I've been addressed under and turned off for a year... I get very frustrated with this!

  : D

  Try changing the drive letter and y or X. mohanad

• Install a new hard drive and Windows 7 loading no settings are changed on the mother board or bios installation? :

  I have a desktop Dell-540 in which my c drive is a Raid 1 configuration of 1 TB (two disks to not up to 1 TB, Raid 0, which is the backup) which has all my programs and data.  I have a 2nd J: 1 TB (single drive - no raid) drive that I use as my back in-house to my drive c.

  I am running in all genres or the problems of Windows 7 as well as running out of space so I would install a new 2 TB drive as new drive c and re - install windows 7 for a clean install on a single partition.  I intend to disconnect my current c drive (which consists of my two disks in a raid 1 configuration) as well as to disconnect the 1 TB drive unique j and connect my new 2 TB drive.  I would like to install a clean version of windows 7.  So my question is this:

  If I disconnect all the old disks (c and J) and install a new one and start to load windows 7 on it, the new facility does affect the bios or motherboard settings?

  f for some reason so I have encounter problems, can I just unplug my new drive of 2 TB and re - connect my original c drive and drive j back to the motherboard and have it load up as it was before original, I unplugged my old PC would be back up and runing?  Or, install Windows 7 on a new drive change the settings of the motherboard or bios Setup that would prevent me to connect to any return to as it was before I started?

  In fact, raid 0 is striated, which means that two readers work as something one 1 TB raid 0 disk is made from two 500 GB drives. RAID 1 is mirrored, meaning that you would have two 1 TB drives each of which is one exact copy of the other. Replacing your hard drive and perform a clean installation of Windows 7 will not change your bios settings. You will need to enter the bios and change the configuration of the training of raid 0 or 1 for sata before install Windows on the new drive. To return to your original configuration and the hard disks, you will need to enter the bios and re - configure the hard drives in the raid 0 array or 1, whatever one you had.

  Jim

• No Internet after the new hard drive and Windows 7 Clean reinstall

  I have a Dell Studio XPS 9100 I bought in 2011.

  The Seagate Barracuda SATA 1 TB hard drive died, and I replaced it with a Seagate Barracuda 2 TB drive. The re - install Windows 7 went ok, but I couldn't connect to the net.

  A ran the device driver and got errors on the network card and the RAID.

  I went on the site of Dell for the 9100 and installed the drivers for the adapter and the RAID.

  No luck. I always get the error "no card" as well as the error 'no cable not connected.

  I read a lot of posts about this problem and am stuck.

  Someone has an idea how I can fix this once and for all and go on the internet?

  I advise to patch Windows 7 with the WSUS Offline Update:

  http://dellwindowsreinstallationguide.com/WSUS-offline-update/

  Dell System Software:

  http://ftp.Dell.com/FOLDER88677M/8/Dell_System-Software_A03_R282538.exe

  Intel Chipset Device Software:

  https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-

  NEC USB 3.0 host driver:

  http://downloads.Dell.com/comm/R266197.exe

  Card reader:

  http://downloads.Dell.com/Input/R266195.exe

  Intel Matrix Storage Manager:

  http://downloads.Dell.com/SATA/Intel_Matrix-Storage-Manager_A01_R230056.exe

  Realtek NIC:

  http://downloads.Dell.com/Network/R266204.exe

  Atheros Wireless Card:

  http://downloads.Dell.com/FOLDER02988710M/1/Network_Driver_9T8XY_WN32_10.0.0.309_A03.exe

  Note make sure that all the drivers for Dell extract and install and extract not only. If they extract only you will need to manually launch the setup.exe in the extracted folder.

• Problem Canon PIXMA MP760 and Windows 7

  Hello.

  I just installed Windows 7 and tried to connect my printer (Canon PIXMA MP760). He finds some drivers it cost but it showd a mistake and this seems to be the main engine.

  I have also tried to download driver from here https://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Canon%20PIXMA%20MP760%20Photo%20All-In-One%20Printer&v=Canon&uid=9792A005&pf=0&pi=4&c=Printers%20%26%20Scanners&sc=Multifunction&os=32-bit

  But when he took out and so now he appears just "check the connection of the cable between the printer and the computer... blabla".

  I tried to reconnect the printer, enable/disable, restart the pc, checked the cable connection +++ but I can't make it work.

  When I go to devices and printers, I see that the scanner of the printer part appears as a device, but not the printer itself.

  Someone has any advice on what to do to get it working?

  EDIT: I also tried to install the printer on another computer with windows 7. Same problem there. :(

  Hi printerhelp,

  Please do not forget to go to the Canon website to download the software and drivers for Windows 7, as the two look update:

  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&ModelId=11010

  If this isn't your correct printer, you should be able to look it up directly on the Canon site.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Hard drive and windows 7

  I put the external hard drive Toshiba PX 1394u. It worked amazing on my windows XP computer, however I recently moved and brought a computer laptop windows 7 and my hard drive does not work as well as it did on my windows XP (unable to copy files and sometimes does not recognize). It works on my xbox 360 but not my laptop.

  Y at - it ainyway to get my hard drive to work with windows 7?

  What is an NTFS drive? If so, I think you have a problem with its security settings. Pull up the drive properties, click the Security tab and see who can do what - I hope you can see the 'names' on your old laptop. I suggest a google for 'NTFS disk permissions' and I think, you will find step by step guides to sort.

• Problems with encrypted Prestige 2 TB drive and Windows 8.1

  So I have an Iomega 2 TB external hard drive of Prestige that has been and is still working very well. I recently updated my computer to Windows 8.1 and now when I connect my hard drive to my computer, the Iomega encryption software does not recognize the drive is connected, so do not let me unlock it. I tried to connect to another computer running Windows XP and the software recognized and unlocked it very well, but as the reader has a GPT partition style, I guess that's why this computer would not read the drive, once it has been unlocked. So basically my question is is there a way for me to access my disk encrypted on Windows 8.1 or if not there at - it other software I can use to unlock it?

  Oh also, the reader communicates with my computer as when I plug it into the virtual CD with the Iomega utility encryption Setup appears, it's just the actual program does not see the drive.

  Good then I discovered why my hard drive did not work properly. After contacting the support of microsoft, it turns out that the Windows update 8.1 some chipset drivers had not updated and therefore to prevent playback of my disc. in any case, just the display in the case where a person has a similar problem.

• (Lenovo G505) Dolby Advanced Audio driver and Windows 10

  I just install Windows 10 to my laptop (G505) and continue to receive an error message about the Dolby Advanced Audio driver. There are several other similar subjects, but I can't see an entry that helps me with my model. Y at - there any action I can take to make a repair?

  Mod edit: System model added to the front of the subject line to improve visibility / clarity

  
  

• replacing the hard drive and windows 8

  just yesterday bought a hp laptop model #20002b19wm.

  This laptop came preloaded with windows 8.

  I think with windows 8, microsoft puts more COST on the machines themselves.

  My question is this, say the hard drive breaks down and I need to replace it, I'll have to go out and buy another copy of windows 8? I read that the 8 victory is only good for your ' current configuration at the time of the "as its related to the form of machines, etc..

  and where is my product key? hidden in the bios somewhere?

  I have to buy my hard drive from hp directly? I read here that if you try to put any hard drive laptop in these machines, you can not install windows because the new drive does not have the "Recovery" partition

  I'm pretty good with computers, and finally, I want to put a hard drive in this machine more. I hope someone out there can help.

  We hope to hear from someone.

  Hello

  Windows 8 machines come with the activation key encrypted in the bios chip, but you can always use a utility such as the one on the link below to read into the operating system.

  http://www.Belarc.com/free_download.html

  If you create your recovery media set - see link below - you can use this to reinstall Windows 8 on another drive (it will also recreate the recovery on the new HARD drive Partition).

  Create recovery media - Windows 8.

  You are in no way limited to a given provider or a hard drive manufacturer.

  Kind regards

  DP - K

• HP Envy m6 Sleekbook-external optical drives and Windows 8 compatible printers

  I just bought the HP Envy Touchsmart K025-DX from Best Buy m6.  I admit that I did a lot of research and I forgot to check if there was a built-in optical drive.  However, I like this laptop because it fit my budget.  I just want to know if I can use any compatible DVD/CD ROM external external external drive CD/DVD/drive or if it is better to go with the HP brand.

  I thought to return the laptop to the store and try to buy a new one who already has an internal hard drive built in... but think if I add an external hard drive... he wanted me to return this product.

  Also I realized that I probably need to upgrade my HP printer as well as my current HP Officejet j4500 printer software is not compatible with WIndows 8.  Advice and suggestions are appreciated...

  Hello

  You can use any external USB optical drive on this laptop and the printer, you can download the drivers for Windows 8 if it is available in the hp.com. Simply search for drivers by putting the search box in top right where it says search Hp.com.