Canon my kindergarten picture

Similar Questions

• Sweep, but no document - something wrong with my kindergarten picture?

  I used my Pixma MX922 printer with an older computer without any major problems.  A few months back, I had to replace my PC and the printer continued to work properly.  The problem is that today ' today I need to use the scan function (I probably haven't tried to use it because I changed my PC), and it seems that the printer is scanning, but I can't find anything on my PC.

  And then I thought "duh!" Never, I reinstalled the printer software. So I downloaded the "official" Canon drivers, my kindergarten picture and a few other things from the Canon support website and installed it all. But it doesn't seem to make a difference.

  So I started my garden of Image, which was installed just, and "scan" control is gray, for some reason any. I can't find any setting scan regarding

  I must be missing something - what am I missing?

  Hi Haldurson,

  Please try to use the Scan IJ utility to scan your PIXMA MX922.  To scan using the IJ scanning utility, please follow these steps:

  1. click on the start menu select all programs (or all Apps)

  2. click on Canon Utilities, IJ Scan Utility and click on IJ Scan Utility to open the program.

  3. click the settings... button at the bottom.

  4. click on the upper left tab at the top.

  5. click on analysis of Document on the left side.

  6. next to Data Format, choose PDF (Multiple Pages).

  7 any other changes that you want, and the name of the file where you want to save the file.

  8. click on OK.

  9. in the IJ scanning utility, click Document.

  The PDF file will be saved to the specified location.

  Please note that Canon Forum is not intended for immediate help, but a place for the community to give you help and comments. If there is a need for emergency assistance, please use the link below to join our friendly technical support team:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

• mx922 printer not scanning

  I'm scanning with my printer mx922, but nothing happens. He says it's the treatment then it comes back to the main screen without doing anything. The scanner does not move. However, I can still print and copy as usual. I am running windows 10 and have the printer connected to my computer through USB cable.

  Hi Eismann423,

  Uninstall and reinstall the driver should solve this problem. To do this, please follow these steps:

  1. turn the PIXMA MX922 in the CDROM drive CDROM. If the Welcome screen appears, leave it.

  2. click on start and then all the Apps.

  3. click on Windows System.

  4. click on RUN.

  5. click on Browse. In the browser window, click on the Local C: drive.

  6. double-click on the CANON_IJ CD-ROM drive.

  7. double-click on the folder named WIN.

  8. double-click on the folder named Driver.

  9. double-click on the folder named DrvSetup.

  10. double-click on the file named DELDRV. If you use the 64-bit version of Windows 10, please double-click on DELDRV64.

  11. in the run box, click OK, and follow the prompts on the screen to uninstall the MX922 PIXMA.

  12. Once your PIXMA MX922 has been uninstalled, restart the computer.

  Then, you can download the latest driver for your PIXMA MX922:

  1. visit the Web site at: http://usa.canon.com/support

  2. type PIXMA MX922 in the "Type a template name" box and click the Get button Drivers & Downloads.

  3. under Drivers & Downloads, click on drivers.

  4. click on the button select next to the series MX920 MP Drivers.

  5. If you agree, please select the check box next to "I read and agree to the terms of the disclaimer and wish to continue the download.

  6. click on the download button.

  7. If a box to record under appears, click Save.

  8. once the download is complete, open your download folder.

  9. double-click on [mp68-victory-mx920-1_00 - ejs.exe]. Will extract the files.

  10. Once this window disappears, connect the USB cable from the PIXMA MX922 to the computer.

  The installation is complete.

  Once back, try again to scan:

  1. click the Windows Start button, select all applications, point to utilities of Canon, my kindergarten picture and then click on my Image garden to open this program.

  2. click on Scan on the left side.

  3. click on driver in the upper part.

  4. when ScanGear appears, click on the Advanced Mode tab.

  5. click on Preview in the lower part.

  6. the necessary adjustments.

  7. click on scan.

  If you are unable to scan, please contact our support group by using the following link:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

• printing pictures on Canon iP110 Photoshop app

  My Canon iP110 printer will print photos ONLY with My Garden of the Image. I want to print from my Photoshop app and still have this selected printer. How can I get free of my kindergarten picture and print from Photoshop?

  Thank you.

  Thank you so much; I assumed that there was a tax.

• My garden of Image with windows using 10 to scan from a canon printer mg5450

  I'm trying to use my kindergarten picture using windows 10 to scan from a canon printer mg5450 but I get mg5400 in my selection of scan and my printer is not recognized. Just downloaded and installed mp68-victory-mg5400-1_01-YES.

  Any suggestions please

  Re, I installed the drivers and it is now correctly works thanks

• How can I select only a part of a page to analyze instead of having to scan the entire page?

  On my old Epson scanner I could do a preview and select only a position from one page to analyze.  In the garden of Image with my MX 6320, the only option is to scan the entire page.

  How can I select what I want scan before scanning?

  Thank you

  Allen

  Hello

  Mac 10.9.4.  I called Canon and the Lady walked me through what I need to know.  She told me to get rid completely of my kindergarten picture on my Mac, then in the utility scan select Scan speed and now I get a preview window where I can choose the portion I want scanned.

  Thank you

  Allen

• MX 922 scanner error - my garden of Image - an internal error has occurred. Out of this software.

  When scanning, a screen will appear with My Canon Image garden and I still get this error message - an internal error has occurred. Out of this software.  The scanner analyze the element and saves the file in My Documents, but it would be nice if the garden Image worked like it is supposed to.  I had a MX922 for a few years, but it has stopped working.  I bought a new printer 922 and it does the same thing.  I have Windows 7 Home Premium.  Any ideas?

  Hello.

  To resolve this problem, try uninstalling drivers MP, IJ Network Tool and the program of my kindergarten picture from your computer.  Once this has been done, please visit the following link to download the program of MP Drivers and my garden picture update of our Web site.

  MX920 series drivers & software

  It has not responded to your question or problem? Find more help contact us.

• Cannot modify images in my Image garden

  Hello

  I wonder if anyone has had this problem:

  I can view and print the images using my kindergarten picture very well, but when I try to use the feature of special filter or correct/improve, all I see is a question mark in the center of the editing window rather than the image I want to change. I tried to modify different files: my camera photo from my iphone, photos simple jpg, the result is the same:

  

  I have Windows 8, and I have redownloaded and reinstalled the program a few times to the manufacturer sure this isn't a problem installing corrupt.

  Any ideas?

  For those who are interested (support :-)): found what was the problem.) In tools-> Preferences-> Settings Advanced tab location of temporary files (and the location of the Images too - but I think it was unrelated to my problem) were attached to non-existing files. As soon as I set these parameters to valid records, I was able to edit the files.

  I don't know how it happened, but I copied stuff from my old laptop, then maybe some config files got copied too...

• DVD printing with 100 Pro

  Pro 100.  Is it possible to use hundreds of DVD labels I already created in Epson Print CD, with or without the help of my kindergarten picture, or do I have to start over again?  I have Photoshop CC 2015.

  Hello. If your software stores your files in a format that is designed only for this program, you will not be able to use the files with our own software. Please check if there is a way to save images as JPEGS to use in our software.

• My iMac has suddenly ceased to import pictures from my Canon PowerShot

  My MacBook Pro (retina, 13 inches, end 2013) has suddenly ceased to import pictures from my Canon PowerShot.  When the transfer cable is set up and I turn on the camera I get a message on the camera briefly: "Communication error".  I use OS X version 10.10.5 Yosemite and Photos, version 1.0.1 (215.65.0).  My camera specialist said that the problem is not with the camera.

  You have a large SD card in the camera which is full?  http://thedesignspace.NET/MT2archives/000757.html#.VmnV5Ch8u5Ythis seems to be a problem that appears. When the card is full, the camera will not export them and Iphoto seems to not recognize the camera.   https://www.jmedved.com/2012/02/Canon-SX230-communication-error/ You could go into Iphoto preferences and change in general, connecting camera into Iphoto for capturing images. It change and then transfer to Iphoto.

• Blurry pictures of Canon 70-300 mm IS USM

  Recently, I bought a new 70-300 IS of Canon (not the white L). I was clicking famingoes and other waders. Used servo focus and another shot in with a wide aperture aperture priority mode. I was not too impressed by its 300 especially sharpness. Sharpness that I get with my 18-135 STM is much better compared to the 300 especially when cropped. Given that the investment is already made and I can't redeem another lens, also what is the best way out. How can I improve sharpness. What telephoto lens gives the best sharpness. I should send him for a check. It is under warranty. What could be the best option if I were to sell it buy a new one.

  After that I got problems, I read on the net that the sharpness of this lens is not good at all. I wonder why Canon always sell or not done something about it. It doesn't have a reputation to save.

  I take it as a given that you cannot return a new lens for where you bought it.  What is the number of complete, exact model for the lens that you are talking about?

  What camera do you use with the lens?  Some devices have AFMA, Auto Focus Micro adjustment.  Zooms were long to sacrifice the image quality for the convenience of multiple focal lengths, but they got a lot better over the years, especially in the medium price range.

  Several zooms perform better and worse, to certain ranges of their focal lengths.  It is not uncommon that telephoto zooms to, suffer a decline in the quality of the image at the upper end of their range of zoom.  However, you may see pictures of the development.

  If you take pictures handheld, try taking some of a sturdy tripod, just to see if the camera shake is what you see.  Additionally, make sure that the Image stabilization is turned on when handheld using it and do not move the appliance too fast.

  [EDIT]  Can post you a picture of the sample?

• Canon 1200D: pictures come out green

  So basically, I got this camera from my family about a month ago and it has just worked well. Yesterdey now when I went out to take some pictures of twilight, they came out white. Even in automatic mode. Today, I took a few photos also and they came out green. And I don't think that sth wrong with the balance of whites etc bcause these photos look really weird...

  Hikari says:
  So basically, I got this camera from my family about a month ago and it has just worked well. Yesterdey now when I went out to take some pictures of twilight, they came out white. Even in automatic mode. Today, I took a few photos also and they came out green. And I don't think that sth wrong with the balance of whites etc bcause these photos look really weird...

  It could be a white balance issue.  It could be something else entirely.  The only way to know for sure is to go into the menus of the unit and check the settings for the white balance.  You have a copy of the manual?

  https://www.USA.Canon.com/Internet/portal/us/home/support/

  You can visit the page above to find the support page for your camera.  Simply type the name of the model, T5 of rebels in the area.  The manual also contains instructions on how to find the two locations in menus where you can reset the camera.

  For any additional help, I would advise to contact Canon US Support at 1-800-OK-CANON.

• Canon G12_I cannot take a picture. Purple lines fade in and out, then black screen.

  Uploaded a few photos off the G12 and then charged the battery and when I reinstalled the battery I could see pictures, but when I switch them to camera mode I have brief purple lines then black. And I'm not able to take pictures. Help!

  Uh oh, sounds like the processor or sensor could have retired. I have to assume that you can not access the menu to do a complete reset of the system, so I remove the battery and try to keep about an hour. With the battery, press the power button and hold for about 10 seconds. Then, reinstall the battery and see if it does the same thing. If so, you may need to contact Canon on a repair, but that could be very expensive. It could have been a static load that occurred when you changed the battery, otherwise the processor or the sensor has reached the end of the line.

  I feel your anxiety that I have a PowerShot G12 and this is my favorite camera. It is used there, and some refurbished, to replace it. I hope you can get it running again.

  Steve M.

• Canon t5i lcd turns off after taking pictures

  I just got my Canon T5i... I noticed that the LCD screen turns off sometimes after taking photos or videos. I don't know why... I did not press the "info" button and it will not turn back even if I press the shutter button to halfway... I know that the camera is still on though because if I press on the screen it will take a picture and this picture is stored on the card (after that I turned off the camera completely and wait a few minutes and turn it back on)...

  When the LCD is turned off, I can't get it on... I will touch the screen and try to press the display button to see photos, but it will start...

  and Yes, I disabled the auto lcd off etc...

  Here is a little video I made sure to show you what I saw. http://www.YouTube.com/watch?v=TroZa5xLduM

  Should I have a defective camera?

  I noticed in the video that she has Lieview, take a picture and then the picture does not appear, and there is more no Liveview display.  She then press the Liveview button and nothing happens. There's no other option I can think of that allows you to turn off the LCD screen back when you're in Liveview. That tells me that the device is defective.

• I have a Canon T3i and when I take pictures in auto mode, all my pictures look a bit washed out.

  If I put my camera in P mode, put the balance of whites in the setting "100", of "disorder" (even in the Sun) ISO Picture style 'landscape', my photos look better, have more color saturation, more to my taste.  Guess my question is, is it possible to make the settings in automatic mode, to achieve the results in my pictures that I receive when you use the Mode "P"?  It seems to be the same for all the goals that I use, although usually use my Canon 18-55mm kit lens.   I took samples of the same scene in a car, then P mode and the difference is dramatic.  Is it possible to change the default settings in Automatic Mode for this problem?  And if not, why Cannon would set the default settings for these poor results?

  Because I gave up on Auto a very long time for the same reasons that you are having problems I don't know whether or not they have improved how it works. IF you get better results in PROGRAM mode (which you can also refine to be of even better results) then I think that it works as expected. I THINK Canon should not give buyers a DSLR the Auto setting. More first-time buyers spend a lot of time to earn the money to buy their first DSLR & think they can ignore learn them to use by choosing the Auto Mode. For me, it's a foolish gesture. Spend 10% of the time that it took to earn money by reading the manual & practicing things, he tries to explain.

  Another thing that can help is to look at a few times

  http://www.canonoutsideofauto.ca/