Canon Pixma mx922 screen begins to turn

Similar Questions

• Satellite A20 - screen begins to turn white

  So I'm having a problem where my pc screen begins to turn white unless pressure is applied on the lower rear of the monitor. As I was typing this message, the screen has managed to stay sane by himself for a while, but then returned, so I think it mya be any hope for her.

  Any help will be useful, thank you advance.

  Hi IBE876,
  What a Pseudo ;-)
  It looks like problems with the lcd screen.
  to me it looks loke a defective cable and / or a bad inverter.
  do not open the cover of the display until you know what you're doing and you have no guarantee on this machine more...
  This inverter is a dangerous thing! It produces a high for the lighttube voltage.
  If it is still warranty on this unit, better consult a servicepartner, there also the spareparts right...
  If you want to do it by yourself... Keep in mind, it can be dangerous!
  Make sure no powersource is connected to your system and battery is taken out.
  Maybe it could be a loose cable...

• Canon PIXMA MX922 printer will allow no 2-sided Word documents

  I just installed a new Canon PIXMA MX922 printer to replace an old MX882.  Everything works fine and I am able to print on both sides documents from web pages and e-mail by checking the 'duplex' box on the menu drop down print...  However, I am unable to both sides print all Word documents.  No check box 'two-sided' descend, and no "duplex" option is available, as it was with the MX882.  I never had this problem with the old MX882.  Can you help me?

  Thank you very much.

  Hi LonnieC,

  To set the option to print double-sided on a Mac, please open the printer driver:

  1. Select layout... in the file menu of the application.  The Layout dialog opens.

  2. Select print... in the file menu of the application.  The Print dialog box opens. In the print dialog box, you can set the paper type and print quality for printing.

• Canon Pixma MX922 problems

  I have a Canon Pixma MX922, I liked when he was running wireless on Windows 7 on my old computer.  Since I replaced my computer with a Windows 8.1 running a new, it does not work, it crawls.  If it moves at all.  Sometimes it will print a full page, but there usually prints some lines and spits half done page.  He's literally printed a page on a single line at a time - at about half the speed of old matrix printers!  What gives?  I have not changed wireless service - only operating system.

  You have installed the latest driver

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx922#Dr...

• I have a Canon pixma mx922 and seems to only print photos... How do I print a document?

  I bought my mom a mx922 pixma to print from your iphone / ipad.  She was printing documents, then pictures, and now she doesn't know how to print the document.  Can anyone help with this?  I'm not in the same State as him, and she is not very tech saavy...

  Hi RONNA999,

  Please check that the PIXMA MX922 is connected to the wireless network:

  1. press the

  button on your MX922 PIXMA.

  2. Select Setup and press the button.

  3. Select device settings, and press .

  4. Select settings LAN, then press .

  5. Select Configuration Wireless LAN and press .

  6. Select your wireless network and press .

  7. Enter the wireless network password and press .

  The PIXMA MX922 will now be connected to the wireless network and it will be able to print from the iOS device.

  Please note that Canon Forum is not intended for immediate help, but a place for the community to give you help and comments. If there is a need for emergency assistance, please use the link below to join our friendly technical support team:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

• The printer could not be detected on the message of network during the installation of the Canon PIXMA MX922

  Unable to complete the driver installation the new installation because of this message. Went through the establishment of the liaison WiFi several times and connectivity was still present. Connected to my D-Link router 626L and saw the connected printer but the referenced ip address is 0.0.0.0. Tried to assign a static ip address through the printer and also to use the Windows cmd prompt, all to nothing does not.

  Called Canon Support and these 2 changes in adjustment solved the problem:

  (1) turn off the Wireless LAN DRX setting

  (2) disable the IPv6 setting

  This article explains how to set the settings of the printer.

  Hi mimiaz58,

  Thanks for sharing!

• Screen begins to turn and using Ctrl + Alt + UP ARROW is not enough

  Today, I logged on my computer to work on it and as soon as I clicked on the desktop the screen turned sideways.  I'm working on an online class where I switch between word and Google Chrome often. Every time I have something on the computer, the screen turns side ways.  I'm not pressing anything on the keyboard when im switching, but it continues to be and I even went to settings, but he says that the screen is fixed to the landscape, even if it has been turned on its side.

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the on-screen display. Don't worry we will certainly help you the question of fixing.

  Do you use the Alt + tab key to switch to other programs in Windows?

  The ability to rotate the screen image is a feature of your video card, to help work with instructors who rotate to portrait settings. Could accidentally pressing Alt-Ctrl and an arrow.

  You can refer to the following suggestions to solve the problem

  Display on the side:

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right click on the empty desk > graphics > Rotation.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Canon PIXMA MX922 User Guide: printing on a blank disc with the Canon PIXMA MX922 all-in-One

  Please ignore my previous post, which should be sent on the Canon Support Forum.  Sorry for the confusion.

  Uh, just to let you know this isn't the Forum HP printer, Canon.  For questions, contact the good folks at Canon.

• Problem with new pixma mx922 and Canon Menu fast

  Just buy a Pixma MX922. Analysis of and print well. If I use the Quick Menu of Canon, it shows the scanner but not the printer, so I can't use all the photo print settings. I'm on a MacBook Pro with OS - X El Capitan version 10.11.2. It's connected to an AirPort Extreme wireless. Can anyone help?

  If you go to System Preferences, and then select Printers & Scanners 922 MX is listed as a printer Hello?

  If Yes, click the '+' and wait a minute or two IJ version appears and install it.

• Photo paper moves sideways when printing on PIXMA MX922

  I have a new Pixma MX922 printer and when you print photos of 4 x 6 paper moves from side to side during the last inch or more printing.  I have tried different paper with the same result, currently have a Canon Photo Paper Plus Glossy II in the printer.  The book seems to begin to move laterally when it makes contact with the paper output tray.  I use the Canon software to print my photos.

  Hi mclark4013,

  To try to prevent the paper to move, we can allow the setting prevent abrasion on the printer paper.  To do this, please follow these steps:

  1. press the MENU key.

  2. Select SETTINGS, then press the OK button.

  3. Select DEVICE SETTINGS, then press the OK button. The device settings screen appears.

  4. use the up/down arrow keys to select the PRINT PARAMETERS, and then press the OK button.

  5. use the up/down arrow keys to select the parameter AVOID the ABRASION of PAPER, and then press the OK button.

  6. use the up/down arrow keys to select Yes, then press the OK button.

  Please try printing again.  Once printing is complete, please be sure to set this parameter to OFF.

  If you still have problems, we ask that you call please 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays) for assistance.  A Canon technical support representative will be happy to help you.  There is no charge for this call.

• I have put in place for the double sided copies on Canon Pixma MX 922? Thank you

  Hello

  How can I get my Canon MX 922 to make double sided copies?  Thank you

  Wish they offered an instruction manual...

  Chrismiss56

  Hi chrismiss56,

  To copy both sides of the page, please select your PIXMA MX922 and follow these steps:

  1. press the button COPY.

  2. load the paper you want to print on in your PIXMA MX922.

  3. load the original document on the glass exhibition or in the ADF.

  4. press on the right-hand (under Print on the LCD settings) button.

  5. press up or down arrow select-sidedPrintSetting 2 ot.

  6. press on the arrow right or left to select 2 sides.

  7. press the button color for color copying, or the black button in black & white copy.

  Will depend on where you have placed the original, additional screens will be displayed.  Follow the prompts to complete the copy.

• I have a Canon Pixma MX 880 and when I try to edit or delete photos on my SD card,

  I have a Canon Pixma MX 880 and when I try to edit or delete pictures on my SD card, I get the following error:

  "You must be authorized to perform this action" and below:

  'You need permission of the administrator of the computer to make changes to this file.

  Wireless printer is installed.

  I am registered as an administrator, do not have access to any user account.

  The old problem mounted HP Photosmart I replaced, I could change, remove, etc. without problems.

  Hi ehnco,

  It seems that the read/write on the printer attribute must be changed.  Use the following steps to change the read/write attribute:

  1. Make sure that the machine is turned on
  2. Press the Setup> button.
  3. Use of the the button to select [ device settings], then press the button.
     The device settings screen appears. 
  4. Use of the the button to select [device user settings], then press the button.

• Canon Pixma MG3520 - does not light

  Canon Pixma MG3520

  I have just printed/copied paperwork this week!

  It absolutely, positively, not light.

  I bought this last semester, which would have been around January or February of this year.

  It has not been moved, the circuit on the Strip, to which it is connected has not been triggered, everything must be in perfect working condition.

  How can I go about it? Reset somehow? Send it for repair? Do a dance and sacrificing a Nikon?

  Help please. I will need very soon for the school.

  Update:

  Fact a little research and it is a known problem with the firmware.

  See here: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg3520?p...

  And here: http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg3520#Drive...

  I unplug for a bit more than two minutes and did not return.

  Now, at the beginning when I was doing the instiallation, he says that he has failed. But I turned the printer and turn it on again (hah...) after failure and we are back online and print. So I don't know if the firmware updated succeeded. But the printer works again and that's all that matters for now!

• Printing from Lightroom 5.2 on Canon Pixma Pro-1

  Hello

  I am new to Lightroom 5 and Canon Pro-1. I'm not sure that I fully understand what is happening when I use ICC profiles for printing (in spite of paying through forum after forum). When I print the results look, nothing like the results on the screen. I tried the soft test and proof image looks like my output, but I'm not understand how I'm supposed to use the ICC profile.

  System

  Windows 7

  5.2 Lightroom

  Canon Pixma Pro-1

  8 GB RAM

  1. use of proofing it appears that I need to adjust my image for each paper type. It is not meant for me - I thought that the profile would be to adjust printing so that I wouldn't have to adjust the image.

  2. when I print, I put the following settings of the printer:

  

  3. when using unsupported paper, what types of paper should I choose? Is there a resource anywhere that tells me?

  

  4. should I have my correct print settings Lightroom base?

  

  Is could someone please tell me what I understood/hard to please? I know it's a forum for beginners but still, please, excuse for the total lack of understanding.

  Help is greatly appreciated.

  Thank you

  Mike

  I use the Pro-100 for a few months.  It's a great printer that I am very satisfied.  Currently there is a very aggressive rebate program if someone wants a new printer.  FWIW, I have been unable to find anyone, anywhere not happy with Canon Pro printers.  Basically, you can get a value of $170 of paper and ink for $99 with a printer that is 'free' to the end of the year.

  Return to this topic!

  There are potentially three completely different workflows between Lightroom and Canon Pro-life 1, 10, 100 series that involve choices of papers, ICC profiles and color management.

  1. printing with Lightroom controlling color.  You must open the printer driver and disable the printer color management.  By selecting the document in the pilot seems to define the profile.

  2. print with the printer manage the colors.  In LR, he must choose color management > managed by the printer.  Then turn on color management in the printer via the driver.

  3. printing with Canon provided in Cap.  After you have installed the plug of the supplied disc, in LR, go to file > Options of the plug-in > Canon Print Studio Pro.

  Like Lightroom fan, addict and supporter of everything that said J Kost, I was using #1 and love for landscapes.  I had to work a bit to find a way to turn off the printer as well as examples of J Kost for Epson.  Then I tried to print a picture of my granddaughter and her cheeks kept getting a little purple.  When I checked the Preview button before printing in the printer driver, I could see the change in color of the preview of LR.

  I went to #2 where the printer takes the decisions.  Extracts matched and stopped the cheeks blush.

  Then, I looked at a video conference conducted by a specialist of Canon products on the Web B & H Photo site in an hour.  It's the Canon plug-in demo.  I am strongly considering using that in the future.  I hope that Kost J will not be upset with me!  It seems that the Canon plug-in really has better control of quality on the printing process.

  A particularly interesting feature of the plug-in is a test sheet that looks like a sheet of evidence.  There are a bunch of thumbnails printed on a single sheet with a different color casts and numbers of adjustment under them.  Once you choose one that is 'just', you can save the setting as a "Preset" for that paper.

  Note that in the long video, Canon representative insisted on the support of 3 papers of party in the plug-in.

  Too long video was worth the investment of time.  I understand my printer and more watching him.  The link: http://www.bhphotovideo.com/indepth/photography/tips-solutions/canon-pixma-professional-in kjet-printers-exactly-you-considered

  Bill

• El Capitan is compatible with Canon Pixma printer?

  The new Mac OS is compatible with Canon Pixma printer

  It is compatible with my 3 printers Pixma Canon's (MP830, MX922, Pro9000)