Capacity problems memory marketing of computer virtual - VMK_NO_SPACE

Scenario:

Our client has a VMWare ESXi host 5.5 with three Windows 7 Pro 64 bit VM on it.  We do not have this configured more than the customer.  IT companies set up for them and there is no way to get in touch with them because they have dissolved since.

Our customer has just checked on their VMWare environment and found that among the three VM not illuminate.

I jumped in and felt that the first virtual machine (the one that was powered) has 20 GB of memory, the host itself has 60.  The 2 other VM also had 20 GB defined on them.

When I tried to turn it on, I got:

Unable to start the virtual machine.

Has no power on the virtual machine.

Could not power on VM: msg.vmk.status.VMK_NO_SPACE.

The current swap file size is 0 KB.

Cannot extend the pagefile from 0 KB to 20971520 KB.

Troubleshooting:

I continued then to reduce the memory two (make the same mistake with the appropriate number of KB at the end of the error each time) until I put them both to 2 GB of memory, then they were able to start up.

After still playing with it, looks like I can split only 5 GB between the other two until I start to get the error again.

Question:

Don't ask not why the virtual need 20 GB of memory, the client machine just told me that they work very well to have all three of the computer virtual to 20 GB of memory, but why these would stop working all of a sudden until a much smaller amount of memory which apply to them?

I have read the article below, but it did not help:

VMware KB: Turn on/off a virtual machine fails with the error: impossible to extend the pagefile to 0 KB to xxxx KB

Addition to the response of vuzzini - if you happen to run out of space on the data store, set a reserve memory for VMS to their important part push in memory, or just enough, until a swap file can be created on your designated storage space. The memory reserved quantity is subtracted from the .vswp file.

If the host has 60 GB of memory in total, you will need of 2.6 GB Mem free for the hypervisor, more additional of 1270 MB - Let's say 1, 3 GB of RAM to avoid restoration of memorization techniques to indulge. In total, leave at least 4 GB of free for the hypervisor and spread the 56 GB remaining memory as reserves. It would be 18GB booking/VM.

Let us know how it turns out

Tags: VMware

Similar Questions

  • Problem with the backup computer virtual to Virtual Center 4 with VDR

    VC in Vsphere4 is the virtual machine. When I try it with VDR save there is an error failed to create a snapshoot because the operation has timed out.

    VC is Windows 2003 Standardx64.

    I know the problem with vdr and VSS service and so on, but I does not do so in this situation.

    All reviews are useful.

    Thank you.

    Thank you

    What about the vssadmin list providers?

  • Firefox uses a huge amount of memory on my computer. I continue to receive alerts from high memory usage. Can I do to solve this problem?

    Firefox uses a huge amount of memory on my computer. I continue to receive alerts from high memory usage. Can I do to solve this problem?

    300-400 MB is not huge.

    How much RAM do you have?

    How AVG reports that Firefox uses?

  • Windows Media Player opens when I type any key. This started 2 days ago and did the computer virtually unusable. The mouse is however immune to this phenomenon, so I can still use it. No idea how to solve this problem?

    Windows Media Player opens when I type any key. This started 2 days ago and did the computer virtually unusable. The mouse is however immune to this phenomenon, so I can still use it.

    No idea how to solve this problem?

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Do a system restore. Choose at least 3 days ago when you did not have this problem as your restore point.

    Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
    To sit and wait. The machine restarts when it's done.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Total physical memory and the total virtual memory

    Hello

    When I checked the repressive information of my laptop computer on which Windows XP SP3 installed, I discovered that RAM is of approximately:

    Total physical memory: 2.048 MB
    Available physical memory: 1.32 GB

    Total virtual memory: 2 GB
    Total available memory: 1.96 GB

    As this screen shot in Arabic shows:

    I don't really know what mean these four memories.

    It would be very much appreciated

    Physical memory is actual RAM that is installed inyour PC is fast enough with respect to access to the data

    Virtual memory is not physical in terms that you can't touch it or remomve it. Vitutal is a section of hard disk space unused which is used on-site for faster physical memory that your PC does not have memory.

    Because the hard drive is slower interms of access data to physical memory, your PC will see improved performance by adding or replacing existing physical memory with amounts more or more (512 MB or more)

    Virtual memory allows your computer to always run, but at a slower speed when you run applications that have used all of the physical memory. Remember, even before starting a program already running the operating system and other services which each allocate a block of physical memory for themselves. You can see exactly how much is used by pressing CTRL-ALT-DEL and display of the process tab and the performance tab.

    You can easily determine what your need to add to your PC memory by visiting a site like Crucial.com which allows you to scan your pc for the type of memory used.

  • Problem is when I vMotion virtual machine running it stop responding for 5-10 sec.

    I get a black screen with the message "waiting for connection" and complete the wheel which revolves around 5-10 seconds until the display returns and vMotion. vMotion drop the ping package on the virtual computer to 78%

    I created the test of setting up a pilot project of HA/DRS in my company. But I found that there is a problem with vmotion on running virtual machine.

    I have 2 Dell Power Edge 2950 servers with 8 GB of RAM and dual NIC. I gave a separate connection to port vKernal for vMotion. Everything works well except vMotion.

    I took RDP to the manual migration of vm and VM stop giving response for 5-10 seconds

    Cool is...

  • What memory card for computer mac laptop

    I would like to increase the memory of my computer mac laptop.  How can I have one bought and installed?

    Depends on what model of MacBook you have.

    See the OWC site and find the memory that is adapted to your MacBook.

    https://eShop.MacSales.com/shop/memory/Apple_MacBook_MacBook_Pro/upgrade?_ga=1.8 9586203.1412082564.1442729407

  • WIM files taking up the memory of the computer

    I have a HUGE amount of WIM files taking up my space of memory in the computer.

    Is it safe to delete these files, and if not, what are the effects in this way?

    Thank you

    christhedev

    These WIM may have been created when you eventually updated your system, usually backup files, somewhere along the line, but cannot say with certainty.  I recommend delete and save them to an external hard drive just in case the main C drive.  I don't think you'll see any bad effects.

  • The internal memory of the computer when using iTunes.

    Anyone know if I add a movie or a song on iTunes and remove it from the computer, it still occupies the memory of the computer?

    Thank you for your help.

    Memory and storage are two different things.  The memory is that the system uses to power the computer, so I don't think it's relevant to your question.  Memory is not used for a song or video, to less than the Mac used to play the song or the video.

    For storage, if the iTunes Media in your iTunes library folder has the only copy of the video or the song file, then delete it from your iTunes library by selecting the option to send files to the trash AND empty the trash, will remove it from your storage space.

    However, if you have added this video or song manually (from outside of iTunes), iTunes is configured by default (for Mac) to make a copy of the song file or a video for use in its iTunes Media folder.  iTunes leaves the original file where you added since.  Thus, you can have a second copy of the song or the video file in the storage of your computer.  You can do a search using a Finder window on the song or the name of the video, to see if there is still a copy in storage of your computer after the removal of the iTunes library.

  • What is the maximum memory for this computer what kind

    I want to restore my system like new or factory but I have no disk what the best thing to do and what is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

    What is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

    Maximum RAM 2 GB

    http://support.Dell.com/support/eDOCS/systems/dsleest/specs.htm#memory

    Note: the manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

    Usually, just by pressing F11 continuously during the computer startup to display a boot menu offering the option you need.

    You may need to contact the manufacturer of your hardware (Dell) to see what options they have to repair Windows.

    UTC/GMT is 20:35 on Saturday, May 26, 2012

  • Upgrading the RAM. Can I use the old memory of the computer for the newly purchased computer.

    My old computer which does not has RAM 1.00 GB Dual-Channel DDR @ 106 MHz (2, 5-3-3-7), while the anther computer, I bought recently has RAM DDR 400/128 bits. Can I use the old memory of the computer for the newly purchased computer. Are they compatible? Thank you

    Hello nonmae,.

    You must use DDR 400/128 bit RAM in your system. @ 106 Mhz DDR is quite old. It's also much slower than the DDR 400. RAM is not particularly expensive today and it is always best to stick to that suggests your PC user manual.

    You must use the same speed too, if you use a lower speed, the memory of your PC by default at the lowest speed, thus slowing the PC

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • can I clear the memory on my computer, it has 1.5 million points that I can't remove. computer is 5 years old

    Can I delete or partially empty the memory on my computer. It has about 1.5million items dating back 5 years that I can't get rid of, and the memory is almost full.

    Hello

    The term 'Secondary memory', not 'memory', has been / is used to describe hard drives, etc. (it went out of use by a lot of people lately).

    http://wiki.answers.com/Q/What_is_the_difference_between_primary_memory_and_secondary_memory

    Try using this free program to see what is stored on your hard drive and taking space:

    http://www.Jam-software.com/freeware/

    And this is the Microsoft Information on the use of disk cleanup:

    "Delete files using Disk Cleanup"

    http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

    See you soon.

  • I use Vista, Windows Movie Maker. Problem publishing movies on computer.

    I use Vista, Windows Movie Maker. Problem publishing movies to Computer.When publish a movie in windows movie maker help it complete custom, stops at a certain % and remaining time increases.

    I use Vista, Windows Movie Maker. Problem publishing movies to Computer.When publish a movie in windows movie maker help it complete custom, stops at a certain % and remaining time increases.

    ===========================================
    More than likely you are using one or more incompatible source files...
    or the project may be too complex for your system resources.

    See the following article:

    Movie Maker - problem solving-
    "Can't save a movie."
    http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

    Might be worth trying to convert your video files in .wmv format
    before you import into Movie Maker.

    The following freeware can convert:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Format Factory
    http://www.pcfreetime.com/
    (FWIW... installation..., you can uncheck
    ('all' boxes on the last screen)

    Several formats are apparently compatible with
    Movie Maker, but the most reliable choices are:

    Photos - bmp
    Video - wmv or dv - avi
    Music - wma, wav, wmv

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • How did you record pictures from a memory card on computer?

    How did you record pictures from a memory card on computer do not directly use HP Photosmart 7520 web services?

    No, that would be the only way to access the memory card.

  • I would like to know how to get a debugger and how to increase the memory on my computer of mocarosoft 7 HP

    I tried to find information on the question of the debugger, but I'm at a total loss about how to increase the memory of the computer.  Please help me, because I have school work on this 'thing'.

    The Windows debugger is included in the SDK

    http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=8279

    http://msdn.Microsoft.com/en-us/Windows/hardware/gg463009.aspx

Maybe you are looking for

  • Win 7 and FN keys not working not

    Today I upgrade to Win 7 with your DVD, I get the last week. I think that this drug works well, but when I tried to use the Fn keys to stop the music, change britness etc... It does not work. How can I get started?, please! I forgot, I was reading so

  • LabVIEW loop stop when he puts end teststand

    Hello If I have a labview step that is called from teststand, which lies in a loop, what size I can query (or one does not exist), where I can conditionally out my loop of labview teststand when pressed the button "Cancel"?  According to me, there ar

  • Help... In Lenovo brightness control button all in a single C360-4061 does not

    Hello I bought all in a single C360-4061 and the birght full screen, it hurts my eyes... I tried to push the command button birghtness but not working.i tried the shortcut (fn + home and fn + end) but doesn't work no more. anyone can help to solve? t

  • Not messages application error Win32 valid

    Virus disappeared, healed. Essentials MalwareBytes and MS have removed 2 threats/infections. All systems OK, except Itunes and Windows 7 Upgrade Advisor, always show not the valid Win32 Application error messages during installation is attempted. Hav

  • Phones smart blackBerry Torch 9800 problems