Capture OCAP Codian

Similar Questions

• How to enable / on ASA5520 packet capture uploading

  I need to install the packet sniffing inside and monitoring of the interfaces of the external interfaces of the SAA for indoors and outdoors. What is the syntax for surveillance, and how save/copy the .pcap off the coast of the asa? Also, how do you specify the random source (gt1023) port?

  Here is my shot of dagger inside example:

  entry Packet-trace within the udp 10.1.0.1 xxx 207.1.1.1 detailed sip

  In addition, can I run an inside and an outside track at the same time?

  Thank you

  -Scott

  Scott,

  After setting the capture

  Go to the

  http://ipadd of pix/capture/OCAP/sip-trace

  Make sure you have http enabled on this interface, you are trying to access.

  Write it down, if this can help!

  Gilbert

• PCAP Capture does not work

  Hello

  Yesterday I did a screenshot on my ASA 8.0 (3) 12. I can see the internal capture via https://ASA-IP/admin/capture/CapName and https://ASA-IP/capture/CapName.

  But if I try to download the PCAP file I get the download dialog box and a mistake 'OCAP ASA - IP could not be downloaded. I have the packages in my capture so that there should be a PCAP file.

  Any tips?

  Stephan

  Hello stephan,.

  In order to download the .pcap file, you can use the CLI and Web browser.

  From CLI just copy the *.pcap file to a TFTP server

  ASA /pcap #copy capture: cap_name tftp://tftp_ip_add

  LaissΘes just add "/ OCAP" end of commentary to the url "https://ip_add/capture/test/pcap".

  I hope it will work fine.

  Serhat

• Application of floor on Codian MCU

  Hi all

  I want to know the meaning of the events by Codian MCU log output when endpoint sent a request for floor.

  There are newspapers that I captured after that I sent a request floor MXP endpoint.

  Conference CONFERENCE Info 13959 29/07/2012 17:29:43.254 'Name of the Conference' - set floor participating 1272

  Participant of CONFERENCE Info 13960 29/07/2012 17:29:43.254 1272: grateful request floor

  13961 29/07/2012 17:29:43.299 CONFERENCE Info participant_message_fn 1272: request floor

  Could someone let me know what each line means?

  Best regards and thanks in advance

  Kotaro Hashimoto

  Hi Kotaro-san,

  Third line in the newspapers show the message, it is not sent by MCU.

  It shows the real message received by request IE MCU for floor.

  Not sure what is "fn" stands for.

  Kind regards

  Sagar

• WebVPN - error: access method is not supported for the capture of WebVPN

  I'm watching a capture of webvpn on the SAA. I start the capture:

  test type webvpn user capture (entering a valid user name)

  Then I connect to the ASA to try to see track with "Using a browser to capture displayed data" as described in the setup guide.

  https:// / admin/capture/test/OCAP

  After login, I get this message in the browser:

  "Error: access method is not supported for WebVPN capture."

  If I stop the capture (capture test) before you try to connect, the error in the browser is:

  "404 not found".

  The/admin/capture/test/OCAP requested URL was not found on this server. "

  Any ideas greatly appreciated. Thank you!

  After some research, I finally found it

  DOC: Webvpn catches are recorded only in zip format

  
  

  CSCtg79320

  Symptom:

  WebVPN captures are only saved in zip format.

  Conditions:

  According to the following doc:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/WebVPN.html#wp1153077

  WebVPN captures can be recovered in the pcap format using the browser, which is incorrect. The document must be corrected.

  Workaround solution:

  N/A

  Thank you for your time and cooperation

  Portu.

  In case you have any other questions please note all useful messages and mark this question as answered

• Upgrades to IOS 10 and lost the screen capture feature

  Previous IOS versions allowed me to do a screen capture using the home and power buttons, but in 10 IOS it no longer works. Why?

  It still needs work. It does for me. However, the change in the way that the button Home construction seems to have caused the calendar problems for some people. Try pressing the power first and now button, and then press the home button.

• iPhone 5 s 10.0.2 update cannot use image capture

  I have a mac pro running 10.6.8. Since I upgraded my iphone 5s today 10.0.2, I am unable to use Image Capture on my mac to transfer your photos, iphoto does not work either. I get a message on my phone to the computer I chose to 'trust', then I get an error message in the Image Capture in saying that I have to enter a password on my phone but the password is not displayed at the time.

  Hello pwexford,

  Thank you for using communities of Apple Support. It is my understanding that you were unable to use transfer pictures from your iPhone to the Image Capture. It is very important to save valuable images of your phone. I want to make sure that you are able to transfer this content correctly.

  His expected behavior to be prompted for a password if the phone is locked. Please, try the following steps.

  1. Connect your device to your computer, and then turn on the unit.

     If the device is locked with a password, enter it.

  2. In the Image Capture, select the device from the list of devices.
  3. Use the buttons at the bottom of the window to Capture of Image to display thumbnails in a list or as icons to change the size of thumbnails, or to rotate or remove images.
  4. In the pop-up menu to import to, choose where to save images or what application to use to open the image.
  5. To import only some of the photos, select the photos you want, and then click Import. To import all the photos, click Import all.

     Choose AutoImporter menu drop-down ' connection opens this [device] ' to transfer images from a device to your computer whenever you connect it to your computer.

  6. Select "Delete after import" to remove parts of the instrument after transfer to your computer. You can also select individual items on your device, and then press Delete on your keyboard.

  Image capture: Image transfer and other elements of your device

  Have a wonderful day!

• Image capture will not work with Scanner

  Hello

  I have an Epson Perfection V550, which worked until I upgraded to Sierra. Now, although showing also installed and available as a device of Capture of Image, I get nothing more than Capture of Image that "waiting for scanner. It has been suggested that I reset via picture Capture TWAIN devices, but there is no other choice via the file menu.

  What can I do?

  Thank you!

  Gregg

  Because of the preferences > printers and Scanners, the open scanner work?

• PDF Image Capture files

  Since the update to Sierra (although I can't say that this was the cause of the problem), I have a problem when parsing and saving documents in PDF format using the image transfer application. A PDF file is created but when I open the pages are naked with perhaps only sometimes visible top line (and which appears at the bottom of the page!). This problem occurs only when I choose the PDF format; If I choose to save as an image file (PNG, for example), it works fine.

  My printer driver is up to date and if I use software of third parties (e.g., HP Scan) this problem is specific to the application of Capture of Image so I can create PDF files successfully.

  This problem occurs on my iMac Mini and Mac Book Pro which have been updated for the last OS of Sierra

  You see the problem even if you scan to PDF using Preview?

  I use an excerpt instead of the Image Capture to do this and he continues to work very well in the Sierra AFAICT. I'll try with the Image Capture when I get the chance, just to compare. He used to work as well, but I've not scanned with it in quite awhile.

• image capture does not work with the epson scanner after macOS sierra upgraded

  Image capture no longer works with epson scanner v800 after upgrade. I installed the new drivers from epson, and it still does not work. Just says: "waiting for scanner", but nothing ever happens.

  Drivers Epson macOS 10.12.x specific https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=256062 & infoType = Do wnloads & platform = OSF_M_X12 do not work?

• Image Capture App combining OS Sierra files

  Hi I have a problem with the application of Capture of Image integrated into the Apple OS since the update to the Sierra. Before the update I scan documents into the feeder of my MFP as a PDF file and select 'combine them into single document option. of course, I get a PDF file with the scans in. I would then analyze an other internal documents and again, I would get another PDF document with them in.

  Since the update OS Sierra and using the same settings as the first PDF file is created in the end, however when I go to scan the next set of documents Yes it creates another PDF file with these files in but she also adds the previous set of scanned files to the same doc. This continues for each subsequent set of scanned files. The only way I managed to prevent this must either exit the Capture Image soft after each set of scanned documents or in the test results window, select the magnifying glass next to the analysis the folder Apps of Capture Image temporary Doc and send these files to the trash. It's as if the app is no longer clearing Temp files between scans automatically.

  Details: OSX El Capitan of OS Sierra. MFP to use Lexmark XC2132 Via USB 2.0 connection. Image Capture worm 6.8

  Hi Simon.B82!

  I see you have a problem with the scanning of documents in the application of Capture of Image.  I know it's important to have your applications work correctly, and I'm happy to help you.  To further isolate the issue, please create a new administrator account on the Mac.  A test to see if the problem of scanning is always present in the new user account.  Here are the instructions:

  How to test a question in another account on your Mac.

  Thank you for using communities of Apple Support.

  See you soon!

• 7 iPhone very slow camera capture

  Hello world. You already have the iphone Go 7 256 1 week. I find the camera focus speed is acceotable but a bit slower than 6 sec. However, what I find most disturbing is that after I pressed the shutter release button it takesa very long time to capture the image of which lack the coup my kidd or blurry images. I compared it side by side with the iphone6 more. Then 5s snd 5. The results are disturbing. Even my 5 captured images faster 4 years together with a speed more slow focusimg

  Did a reset using itunes on pc NDS installation again and also using recovery as suggested by cat from apple. Always the same. searched on youtube on speed tests and note 2 reports that canera 7 is laggy. Anyone with questions? Is it hardware or software? Please notify. BTW also on the latest ios 10.0.1

  Sounds like a problem with the hardware for me since it has been restored. I suggest you to take over an Apple Store for testing. I have a 7 128 GB and my camera is not giving me any questions.

• Image capture will delete everything?

  Capture images on Mac is a convenient and popular tool to delete photos on your iPhone.

  But when I start IC, what I see is a single mass of photos assigned to my phone. No albums or other ways to organize photos visible on the phone itself are visible here.

  So the question is, if bulk - delete you photos to the help of IC, who is also going to delete things from your phone as Favorites or other albums, you either created on the phone or that have been created by another application (for example Instagram)?

  EDIT:

  I confirmed that the removal of a photo by IC will remove other albums on the phone in addition to the camera. I tested with the Instagram album open on my phone when deleting an image in IC I know has been stored via Instagram. Of course, he immediately disappeared for the phone album. Bad luck.

  The bottom line is I'm emptying my camera, but I don't want things to disappear from the others, these albums more carefully organized on the phone.

  It can only access the photos and videos from the camera to roll. Items further albums cannot be manipulated by Capture images or Photos.

• image capture does not recognize my iPhone when I connect to my mac?

  I have the iPhone, when I connect it to my photos of mac does not open... How can I put on it to open it

  Hello rosrich,

  If I understand your message that you are eager to the Mac to open Image Capture when you connect your iPhone so that you can import the photos. I would like to have the possibility of having an auto app launch when I connect my iPhone as well. I'll be happy to help you with this.

  If you go ahead and open Capture of Image and then connect the iPhone, in the lower left corner, you will see the name of your iPhone and the "connection this iPhone opens:" you have the option to choose what app that you like. So if you want Image Capture to open when you connect your iPhone, you would select which. If you want pictures to open, you would select Photos instead. Information on the AutoImporter lies in the following article:

  Image capture: transfer images and other elements of your device

  Thank you for using communities Support from Apple. Nice day!

• iOS 10 watered iTunes update and picture Capture

  iOS 10 watered iTunes update and picture Capture

  So I have a dear a few applications and functions I always use Snow Leopard on a Mac Pro. Updated my iPhone 6 and iPad 2 Air more iOS 10.0.1 today. Went off without a hitch... to the... I plugged in the desktop...

  Both devices trigger the pop-up asking to "Trust this computer" and iTunes implements that an invalid response was received from the device. By telling the trust doesn't make NO difference, restart the iOS device makes no difference. For wifi connections do not work or the other (iTunes wifi sync).

  Any suggestions before I restore my backup iOS 9? Was going to order a Plus 7 but the upgrade to the new software Mac OS as Mavericks/El Capitan is NOT an option.

  Frustrated in Austin

  So for you iTunes connect to iOS 9.x, you need iTunes 12.x or better that requires OSX 10.8.5 or better.