Card problem QFile and sd

Similar Questions

• Problem downloading and saving a file text not in the SD card

  Hi all

  My goal is to download a KML file and save it to the SD card.

  My code did not throw any error and has also created a new file in the SD card. But the data inside is not correct.

  Someone please correct my mistake.

  Here is my code:

  public final class MyTest_ToDownloadAndSave extends {screen

  public MyTest_ToDownloadAndSave() throws IOException

  {

  StreamConnection conn = null;

  InputStream inputStream = null;

  FileConnection fConn = null;

  OutputStream outputStream = null;

  byte [] byteVal;

  StringBuffer sb = new StringBuffer();

  try {

  Conn is Connector.open (StreamConnection) ("https://sites.google.com/site/mykmltest1/multilockml/cta.kml", Connector.READ_WRITE);.

  inputStream = conn.openInputStream ();

  int ch;

  while ((ch = inputStream.read ())! = - 1).

  {

  SB. Append ((char) ch);

  }

  }catch(IOException e) {}

  throw new IOException ("problem with the URL");

  } {finally

  try {

  if (inputStream! = null ) {

  inputStream.close ();

  }

  if (conn! = null ) {

  Conn.Close ();

  }

  }catch(System.Exception e) {}

  throw new IOException ("close connections problem");

  }

  }

  "Rtx RichTextField = new RichTextField (downloaded successfully"+ sb.toString ());

  Add (RTX);

  try {

  fConn = (FileConnection)Connector.open("file:///SDCard/BlackBerry/cta2.kml",Connector.READ_WRITE);

  if (! fConn.exists ()) {

  fConn.create ();

  }

  outputStream = fConn.openOutputStream ();

  if (sb! =null & sb.toString ()! = "") {

  byteVal = new byte[sb.length ()];

  byteVal = sb.toString () .getBytes ();

  outputStream.write (byteVal);

  }

  RichTextField rtx1 is new RichTextField ("registered successfully");.

  Add (rtx1);

  }catch(IOException e) {}

  throw new IOException ("writing to SD card problem");

  } {finally

  try {

  if (outputStream! = null ) {

  outputStream.close ();

  }

  if (fConn! = null ) {

  fConn.close ();

  }

  }catch(System.Exception e) {}

  throw new IOException ("close connections problem");

  }

  }

  }

  }

   

  http://en.Wikipedia.org/wiki/List_of_HTTP_status_codes

  3xx is the guy you want

• BlackBerry Smartphones WhatsApp messenger message history and memory card problem

  Hello BlackBerry

  I just moved a user of symbian from nokia to user BB

  I bought a new curve BB 9360 and installed a micro sd 32 GB inside card and worked well but I had a lot of problems with the unit it self and I had to replace it with another and I did today. (the same thing and I took my 32 GB card and replaced in my again just to save time of re photos and files to the new address.)

  I have installed whatsapp on the first via app world

  He did and has worked very well and worked the message history

  But today, when I installed whatsapp on my second one (appliance) successfully

  I opened the settings and found that the message history is set to media card

  but there is an error indicating that a file is not found or missing

  and when I cat no message history is saved as he says at every summit a message message history chat is disabled

  memory card is to play

  Note that: my memory card is new and working and worked very well on the previous model of the same device

  and yes I can access photos and music

  Please help I'm new to BB

  Hello hmthepirate

  I already did, but nobody answered me so far

  but I managed to fix it my self

  Here's what I did

  1 - update appworld

  which resolved many questions about app world

  2 - app world offered an update to whatsapp Worm worm (2.6xx) (2.7.xx) so I've updated and voilla it solved the problem, so far, no error and it works

  Thank you very much

• Problems of Battlefield 3 game when connecting to a server: "cannot initialize the display adapter, please make sure that your video card is compatible and the driver so that it is installed.

  Im trying to connect to a server on Battlefield 3 as im log on a server I get a message saying: could not initialize the display adapter, please make sure that your video card is compatible and the driver so that it is installed. Usually, it is a result of the lack of specific driver of the seller then, how can I fix this problem so that I can play Battlefield 3 new...

  Hi Anthany,

  If you have a hardware device that does not properly with your computer, you probably need a driver updated. There are three ways to update a driver:

  • Use Windows Update. You will have to perhaps set Windows Update automatically download and install recommended updates.

  • Install the software from the manufacturer of the device. For example, if your device is equipped with a disk, this disk can contain software that installs a driver for the device.

  • Download and update the driver yourself. Use this method to install a driver that you download from the manufacturer's website. If Windows Update can't find a driver for your device and the device didn't come with software that installs a driver.

  Step 1: Download and install the latest version of DirectX.

  http://support.Microsoft.com/kb/179113

  Step 2: Download and install the latest graphics driver and see if it works.

  Update a hardware driver that is not working properly(Windows 7)

  Good day!

  Answer please if you face concerns.

• Screen flashes different colors and freezes at the same time, there is a video card problem?

  When it gets really bad most of the screen will Blanch and freeze. This global problem cut in and out, but is common.
  Any help would be greatly appreciated.

  EDIT: I forgot to mention that it is a HP G62 laptop.

  Hello

  Yes, it could be a video card problem. Let me suggest that you run this Fix It routine: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-monitor-and-video-card-problems#.

  Let me know if this helps you.

  Kind regards

  BearPup

• Lenovo K5 note cards Sim and SD card problem

  Not be able to use two sim cards and slots with supplied SD card. How to use all 3 cards as the card Sim 1 and Sim 2, SD.

  Is not possible.

• network and wireless ethernet card problem

  I have a compaq 621 notebook.it has an ethernet connection from realtek and railink 802.11 wireless connection.  recently, I tried to set up a local network. But the lan connection wireless and ethernet connection to the local network gives a message "unexpected error occurred", every time that I right click on the icon. " IAM under WIN XP OS... network drivers are installed properly.

  If you leave a space between the % and the------in
  % systemroot % \system32\netshell.dll
  ^
  should be
  no space here
  This is probably why the command failed.

  Why not install service pack 3 years ago?  Despite the use of Kaspersky, your unprotected system is vulnerable to malware.

  Click Start > search
  Click 'all files and folders' and type netshell.dll in the "All or part of the file name" box
  Click the button next to 'advanced options '.
  Check the boxes for "Search system folders", "search for the hidden files and folders" and "Search subfolders".
  Click on the button "search".

  Netshell.dll found?  It should be in the C:\Windows\system32 folder.

  Repeat the above to search for ole32.dll (NOT ole.dll)
  Ole32.dll found? At least one copy should be in C:\Windows\system32.  Search can find copies in other folders, including some that may appear in blue.  Simply confirm that there is a copy of ole32.dll in C:\Windows\system32.  See-->

  

  If re - run the commands without the space does not fix things, please answer the rest of the questions:

  What are the names and versions of any other security software installed?

  Please provide a concise summary of the steps you have taken to set up a local network.

  Open the Device Manager (start > run > devmgmt.msc > OK)

  • Expand the "Network adapters" section by clicking on the + sign to the left
  • Double-click references to your card Realtek Ethernet and your Ralink Wireless card and report to what is displayed for each under "Device status" and "use of the device.

  Open network connections (start > run > ncpa.cpl > OK)

  • I guess that's where you get the error when you click the icon for the connection to the LAN (Realtek card) AND the wireless network connection icon (the card Ralink).  This hypothesis is correct?
  • What happens if you double-click on the icons?

• Portege R500: Card reader SD and ODD do not work - drivers needed

  I have laptop portege R500, product number: PPR50E-04X04WCE.

  last year, I changed the operating system and installed windows 7.
  Since then, I can't use the dvd drive or the sd card reader.
  And the control panel it apears two unknown devices, but I can´t find the controllers for these.

  What can I do to fix this?

  I assume you found unknown devices in Device Manager.
  Check it please http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
  Here you can find instructions how to identify the unknown devices.

  I checked the Toshiba download under http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and your Portege is listed there, but under the option ARCHIVE. It is supported for Win7 so there is no problem to install all the drivers available.

  Check it out please and let us know if you still have the same problem.

• Qosmio G40-10 s: graphics card problem

  Hello.

  I have a Toshiba Qosmio G40 laptop 10s with a Nvidea 8600 M GT grafixs card. I was playing a game when it locked up and pasted what I would describe as flashing red/green 'Matrixy' search screen.

  He then a blue screen and trys to reeboot.
  He tries to start windows, but once again the top matrix. If it loads to the top, it is in 16 bit color with red dots all over the screen.

  I am sure that the GPU is fried... and I was wondering what I can do? It's been 5 months out of warranty now.

  I read on some forums that there have been a lot of problems with this Nvidea card... Is there anything I can do outside my warranty period with what there is a possibly faulty card in it from the beginning.

  It will cost a lot of money to get it repaired, but its too good a laptop to let go to waste.

  Any help is very appreciated.

  J

  Hello

  You also have these lines on an external monitor?
  If so, there seems to be a graphics card problem and it must be replaced.

  These overheating problems also occur if you use the nVidia display drivers directly. Toshiba drivers are pre-tested and don't overheat your system.

  But I think you need professional help. You should contact an authorized service provider and talk to the technicians. They will help you! :)

• TouchSmart HP Envy 15-j078ca - sound card problems

  Hello!

  I have a HP Envy 15-j078ca running windows 8.1 touchsmart and, recently, I noticed that my audio is static/crackling noises. A test, I plugged my head phones to see if it was a speaker problem or a problem of sound card and audio in my headphones was also static noises.
  
  Some of my audio programs tell me that it is a sound card problem.

  What I did: I followed the advice on another thread that had me uninstall the drivers and hand it to reset my bios settings can have my drivers to reinstall but I found that my audio worked perfectly! ... for about 2 hours then my cell phone was dead silent so I got this back a few days and the audio was fine again... for a few hours before he began to do staic noises again.

  I'm not really sure what the question is here, or how I can correctly solve this so any help would be appreciated!

  Thank you.

  Thank you for visiting the Forums HP's Support and Welcome.Thank you for the very detailed information very useful. I looked in your question about your computer laptop TouchSmart from HP ENVY 15-j078ca and popping sound or cracking.

  Here is a documenton the sounds troubleshooting.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  Hope this helps you.

  Thank you.

• Equium A60-155: ATi Mobility graphics card problem

  Hello

  I have a laptop Equium A60, recently I am getting error informing messages than the "display driver ATi2mtag has stopped working properly.
  I have reset my machine as told to do the error dialog box. Reset works fine, but the laptop crashes to the desktop, when turned off and on again once I get the Safe Mode screen.

  I reinstalled the driver for the graphics card several times, and the error persists through safe mode. The returned error and trying to open in safe mode, the machine flashed a blue screen of death, too fast for me to read, even applied for each of the available options. I was unable to cross this safe mode selection screen.

  As a last resort that I reformatted my laptop, using the Toshiba CD recover but the error persists, with regular driver display and the actual machine crashed.

  Since the reformat, I reinstalled the display drivers, and the problem persists.

  I downloaded the drivers from this site and the problem is still there

  You know a possible fix or solution to this problem? I am a competent enough and user of computer knowledge, so do not be afraid of getting technical in your response.

  Thank you

  Jake Houghton

  Hello

  This problem occur immediately after the operating system starts or after several usage time?
  If this issue occurs after a several time of use, so it could be an overheating problem.
  In this case, you should check the cooling modules. Check if the fans are working properly.
  Try to clean it with the vacuum cleaner.

  If this doesn t solve the problem if you maybe there is something wrong with the graphics card and you will need to contact Toshiba service for assistance.

• Satellite A300-2 TB-Ethernet network card problem

  Hi all

  I have a laptop Satellite A300-2 CT with Windows XP SP3 for a year. There is a problem in the network ethernet card, I think.

  If I connect my computer to a wireless network, all right. However, if I connect the computer to a wired network via the ethernet card, problems begin.

  A little later after the connection. 'something' is happening and my windows theme changes to "classic", plus none of the applications that uses the beginning of the soundcard NOT working. In addition, the system slows down a lot for all the one or two minutes. When I check running applications during the"slow", I see that deferred procedure calls takes a lot of time processor.

  Problem does not end with this, after that I disconnect the ethernet connection and restart my computer, the application of the wireless (Atheros) adapter takes control of wireless connections, so I can not connect wireless networks I wanted. I have to restart the computer to resolve this problem.

  I've updated the network ethernet card driver, nothing changes.

  In conclusion, I think the network ethernet card has a problem and maybe it is in conflict with other hardware (such as the sound card).

  Y at - it suggestions to solve this problem?

  Thank you.

  Hi alp37,

  I have never heard of this issue, and I think all you can do is update the LAN and the audio driver. The two you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If it doesn t work I think I think it is a software problem I would recommend reinstalling Windows Toshiba recovery disc. Who can restore the factory settings, and then you can test it again.

• Satellite A200 - 1 M 4: Flash Cards are dark and not transparent after update v1.1.7

  Hello

  You know Flash Cards is transparent and moving flashy when pressing the FN key.
  After that I downloaded & installed PVAT 1.1.7.see card Flash became a dark, not transparent and does not move when you press FN plus (watch suddenly when pressing FN).

  What's wrong?

  PS. I have A200 - 1 M 4

  Thank you

  Nothing is fake. It is simply a new version. Toshiba has offered this setting day and fixed a big problem. Using the latest version of Flash cards were very slow and it was very awkward. Toshiba has designed the new tool and transparency is no longer available.

  I hope that you know very well that these settings are in need of more resources and laptop runs slower. But in the end I wonder: is it so important to you?

• Equiem L40 XP Downgrade, Wileless LAN Card problem

  After the long task of finding the decommissioning WXP Vista drivers, one pilot left, the wireless card. It seems to be a long beach of problems with that, downgrade then the WLAN doesn t work.

  I've scoured the forums and tried everything, formatted a WXP reinstalled again, but I still get the same problem with the wireless network card.

  Also, we should not have the Realtek drivers (juice tried because this seems to be the problem on many others), but it allows the Atheros drivers to be installed (the Toshiba site a wit throughout another that I found). However, when I press FN + F8 just repeat myself 'Wireless LAN off' upward in the corner.

  This is the cod of the ID of the card

  PCI\VEN_168C & DEV_001C & SUBSYS_7128144F & REV_01\4 & 23 C 6FC 68 & 0 & 00E1

  Can someone point me in the direction of a driver that actually works?

  I'm 100% sure that your laptop has card Atheros WLAN and evidence because it is correctly installed driver Atheros.

  To work successfully WLAN you must follow:
  1. be sure that the WLAN card is not disabled in Device Manager
  2. use the WLAN switch and move it to THE position (the WLAN led will be ACTIVATED)
  3 use the FN + F8 keys and make sure that the wireless network card is enabled

  After doing this, you should be able to use the NIC wireless correctly.

• T430 - (eventually dislodged) network/ethernet card problem?

  I have an ethernet connection that suddenly cut yesterday; my laptop does not recognize that there is an ethernet cable connected to it. He did once before, but mysteriously dressed himself. No chance now. The network light does not appear when I plug the ethernet cable, but I checked (by plugging in another laptop) who works in the internet and the cable is fine. Which indicates that the problem lies with the network adapter.

  I suspect the network card (or whatever the thing you plug the ethernet cable) is filed incorrectly, such that it does not recognize that the cable is plugged in, even if it isn't a very informed opinion. Nothing shows up on a scan or network hardware diagnostics, and I can always get wifi; the map itself seems to work, but for the connection. Disabled/re-enabled network card, so I'm suspecting it's a physical connection problem. In addition, both times where my ethernet connection has stopped working, it was immediately after I came home from uni, with my laptop having had the opportunity to wiggle around in my bag. All this comes after my laptop received a slight bump and some minor visible body damage (although all the NIC has worked perfectly fine).

  Are there measures suggested to take to solve this problem, or ideas on what exactly is the problem?

  There is no card. Connectors and circuits are part of the motherboard. You have a guarantee, although if there is physical damage in this area, it will probably not be covered without cover against accidental damage?