Carpet * a DVD - RAM in Satellite A100 drive does not work properly
When I insert any type of disc, the drive lights up, but the system cannot access anything on the disc. I tried all the fixes that were shown in the forums, but nothing works. The message I get is: D: / is not accessible. I/o device error. Oddly enough the only disc it reads without any problems is the recovery disk. Unfortunately, a system recovery didn't solve the problem.
Hello
If you're still guaranteed then it would be necessary in your case bring/send your machine to a local toshiba for a hardwarecheckup servicepartner. But even if Don t you out of warranty you should do it because your questions sounds like a hardware failure.
If you need help finding a service partner so I can give you a link where you can find one that is closest:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good luck and good weekend
Welcome them
Tags: Toshiba
Similar Questions
-
Drive DVD/CD of Satellite a series does not work properly
My computer sometimes starts fast and when it does recognize the DVD/CD player and functioning.
However when she takes it the start time, it does not recognize that I have a DVD/CD player, when I look in Device Manager to see if
There is no probs it simply says that the device is functioning properly?Does anyone has any ideas at all the
Would be nice of you if you could give us MORE details; for example what operating system you have, what kind of machine you have and so on.
It s hard to help someone, when that person said: my CD does not work, then it works then not again. It is not a description of the error.
PLEASE MORE DETAILS
THX
-
Drive DVD/CD on Satellite A100 - 920 is not working properly
Almost every time I insert a new disk unused in the drive it will accept no photographs transferred etc. of the hard disk data.
When I check the properties of the disc he recorded blue is not free space and right clicking on the icon on my computer IE says:
Total space NILE
Free space on the NILE
Still very occasionally, he will accept a disc and I can't work on why it is so contradictory.
I tried different brands of disk from well known at least known, and I still get this problem.
Help please.Hey Buddy,
When this error was published? You drive works properly before or have you had this error already if you have purchased this machine?
So please give some comments and btw. can you tell me what kind of car you have (DVD - RW or just a DVD/CD-RW) and perhaps the model
Description would be helpful (it's a toshiba or a carpet * an or what...)Would appreciate some comments.
See you soon
-
HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work code 32
HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work Code 32
The other post:
HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work, another driver can provide this functionality. (Code 32)
Hello
1 are there any changes or updates made on the computer?
2. when exactly you get the error message?
Code 32: a driver (service) for this device has been disabled. Another driver can provide this functionality.
I suggest to return the item and try to run the fix it and check if it helps.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Let us know if it helps.
-
Hi, my DVD MATSHITA DVD - RAM UJ 875 S ATA does not work
Even I am facing the same problem.
I have a lenovo y410 laptop. my DVD MATSHITA DVD - RAM UJ 875 S ATA does not work... it is not reading all discs... not to burn all...
When the problem occurred I immediately called the customer... but as the phones warranty period I can replaced also do it... Please help me with a solution...
This is what happens when I insert a disc in the drive... the led flashes for a few seconds... the disc seems to move but then the led stops blinking and nothing happens...
I have tried both what is the necessary changes in the REGISTRY & also uninstalled the software and restarted my laptop. But the problem is still there.
Please let know me of any other way to solve this problem
Hello
I suggest you run the fixit and see if it helps:
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-usIt will be useful.
-
Satellite P200 accidents + message: graphic card driver does not work properly
Hello
hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.
When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.
It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.
I ran a system restore but the problem remains.
I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.
Matt
Hello
Sounds like the GPU problem.
But try the graphics card driver update.
Use the most recent driver for your graphics card.In addition, clean the fans of portable computers.
Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.If this is not enough, then a problem of graphics chip would be possible.
-
ATI Graphics Driver does not work properly
All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
I have checked all the updates of Windows, said that I installed all available updates. Help, please!Hello
First manually check the updated drivers with ATI and ask their support and Forums on all known
questions. Use the methods to update the following drivers.Download the Catalyst Drivers here
http://game.AMD.com/us-en/drivers_catalyst.aspxATI - Forums
http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11ATI - Support and drivers
http://support.AMD.com/us/pages/AMDSupportHub.aspx============================================================================
Other troubleshooting methods would include the boot minimum and others who might help determine
the cause and eliminate problems.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
Carpet * a DVD - RAM in Sat M55-325 drive does not work properly
The Mat * one years (uj-840) DVD player does not work properly.
A symptom of the problem is that the icon does not appear in 'my computer '.
more and she does not recognize the CD.I went to the properties of the drive through Device Manager and saw the following message is displayed:
"Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
Click Troubleshoot to start the troubleshooter for this device. »Following the instruction of the troubleshooter, I tried to update my driver through
Device Manager, but it tells me that the current driver is the more up-to-date version.
In the properties of the drive, I found that my driver version is: 5.1.2535.0
I have RecordNow from Sonic/Roxio which is preinstalled on the computer.What is a simple problem that has a solution?
I don't see other actions to find the root of the problem.Thank you
Hello
Check it please this page http://support.microsoft.com/default.aspx?scid=kb;en-us;320553 Microsoft
I had similar problem. The ODD (optical disc drive) did not appear in Windows Explorer. Method 1 from this page solved the problem. Please try the same thing and let me know if ODD working again.
-
Sat 1900 - CD/DVD drive does not work properly. How to solve this?
Hello :-)
I have a Toshiba Satellite 1900, bought in 2003. It has a cd/dvd drive called MAST * UJDA720.
For the last 3-4 months he was not working properly with movie DVDs. whenever a movie starts, it does not work smoothly, but in stop-and-go. First of all, I had everything again and it works fine, but lately, he never runs well and some DVD doesn't work well at all. Excuse me it I do not explain, I don't have the words in English.
But maybe someone understands me and can help. My DVD player is dirty? Is there something like a standard CD? Or do I have to give the laptop to a repair shop?
Thank you in advance, I would like to have my DVD player, back to normal - especially as I don't have a TV.
concerning
KimbazuluHello, Kerstin
If you can watch the DVD on the unit I don't think the drive is defective. I have the same unit and still work well. Stop and go while playing DVDs can be caused due to the high utilization of the processor.
Please try to start the Task Manager and check all running processes. All unnecessary processes can be stopped and on this way, the CPU will go to a lower level. If the antivir software is installed on your unit checking if this software analyzes the HARD disk and stop it.
These things together can be responsible for stop and go while playing DVD movies.
Good bye
-
DVD-RAM on Qosmio G25 (AV513) does not work correctly
Hi guys,.
My G25 has crashed and I restored it using the original restore CD supplied with the machine, but after the installation of the DVD-ROM (Mat * a dvd - ram UJ-845 s) did not appear in the windows XP media center SP2 and in Device Manager.
It appears with a yellow (!) I tried to install the driver on the site, but there are "device not connected".
I tried the DVD via the Qosmio player and it worked does someone has an idea how make it work on windows again?Thank you
Hey Buddy,
have you tried to remove the drive from the "Device Manager" and reinstall completely? Normally windows should install then device and shouldn´t you need all the drivers, especially for the DVD-RAM.
So, if it is not already done, remove it and try it.Greetings
-
Satellite A200 recovery does not work properly
Hello.
After making a few changes in the partition settings (when installing Ubuntu) Vista does not load (after the loading screen appears a black screen and nothing happens). I changed the Vista partition only by expanding its size.
I try to reinstall Vista and set parameters of origin with product recovery cd, but with the same result - after screen to communicate on loading the filesystem appears black screen and no action is performed. I changed the boot on a dvd/cd device.I guess that's a problem with the parameters of partition, but don't know how to solve. Now, I have an original score with Vista (extended) and the other in the rough. How should I change it to properly run product recovery?
I'll be grateful for any help.@ Salim Al-Ghaithi
This error message is not known to me, but it seems that the application that has been installed on the recovery CD can not work properly.
It's not easy to say why it happens maybe dysfunctions of restore CD or you partition the HARD disk is not going.
I recommend you begin with formatting the entire HARD drive. You must also remove all partitions on HARD drive and then try to use the recovery CD and start the installation. -
Built-in webcam for Satellite A200 (PSAF6A) does not work properly
Hello world
The webcam works fine once the system starts. But sometimes after the laptop is idle for a while or return to standby mode, the webcam does not work and a "Graphics rendering failed" error message appears when I try to turn on the webcam of the built-in Camera Assistant Software.
And I don't think that happens only happens on this machine: I got a replacement of the same model due to an error which is not related to the webcam, and again the same problem happened on this machine.I tried different drivers on the site of Toshiba (AUS) and the driver of webcam usb by default by Microsoft, but the same result... I also read through the forum of Toshiba. Most related threads did not mention the "Graphics rendering failed" error message. I think that this problem is caused by a defective software by Microsoft or Toshiba; and the reason being that the webcam worked after the system starts and with the premise of no change in material or displacement of the laptop, it stops working after a short inactivity or return to sleep.
PS: I also reinstalled windows many times continue the recovery DVDs...
Any help would be appreciated, thanks.
TonyIn my view, this problem could be related to the graphics card driver.
I saw this error message (failure of the graphics rendering) while playing a few games.So in my opinion, this isn't just a question of webcam.
Try to update the graphics driver. I put t know exactly what graphics card you have, but try this sites:
www.OmegaDrivers.net
www.laptopvideo2go.comBest regards
-
Portege Z930 - display driver does not work properly
Hello
We have a Portege Z930 with Windows 7 64 bit in use where the Intel display driver seem to work fine.
First problem is the slow presentation on screen - if we open a (simple JPG) photo and move the window, the frame window break during the move and showed very weird.
Then, we have installed a U3.0 dynadock docking for the use of two external displays more. This method works even worse. To the docking station, we used the driver from the CD supplied in the delivery and connect to a USB 3.0 connector.
On starting switching on 2 screens instead of internally for computer laptop screen does not work - and we use workaround of using an extended desktop on all 3 displays (2 external and internal display for laptop as the third).
In Internet Explorer, it should turn off GPU Rendering and use Software Rendering rather because otherwise, we observed critical irregularities on the external screens (with 2 Windows Open the screen froze or could not display Windows Mobile). However the display isn't satisfactioning.
We have tried 3 different versions of the recommended Driver Intel which is also offered by Toshiba to download; We loaded it is there and also 2 versions more (a more recent, one older) Intel directly.
So, how can we get this working properly?
Thanks in advance and best regards,
N. CochemsMore importantly. Make sure you have Service Pack 1 installed Win7. New laptops have problems running in win7 RTM (without service pack).
It seems that Windows uses the standard VGA driver instead of the Intel driver. Uninstall all display drivers from Control Panel-> programs and features and then go to the Toshiba website and install the utility Intel Chipset then the Intel display driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new software v7.xx DisplayLink driver fixes several issues found in v6.xx drivers.
Verify that the Intel drivers are installed properly in Device Manager.
-
Satellite L10-119 does not work properly
Hello, at the beginning I sorry for my bad English: P
My laptop L10-119 are about 3 years old. I have no problem with it until now, I recall. Today, after 20 minutes of work I turn it off and everything was OK... until I want to turn it on again.
When I press the laptop power button does not start. HDD led is lighting 0, 5-1 s and tun off the coast. I think that the hard drive is not working but I do not know, the screen is black, Cpu fan works, cdrom and Usb ports are powered. He is driven off. Power LIGHT is off even when the power is connected.I have not any ideas what I can do with this ;(
Help, please
Thank younull
Hello
It looks like a hardware problem. I mean if you didn t install anything or anyone pays (for example) some liquids on the machine, then the motherboard could be defective.
The problem is that the machine is probably more under warranty and you will have to pay for a repair. But if you still want to keep the machine for a long time then click on the following link and contact an ASP (Authorized Service Partner) for a hardwarecheckup or a repair:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Sorry, mate, but I think that your machine is mounted to heaven. :(
-
The Cam Driver does not work properly
Hello my product no model is hp 15-r015tu and I download all drivers, but there are still my cam does not
When the youcam driver install in my lappy there give me something error.then missing in driver pack
My OS is win-7 ultimate 64-bit
Hello @JACK_0301 ,
Welcome to the HP Forums!
I understand that the webcam on your HP Pavilion 15 laptop does not work.
Please make sure that you use the following download to install the CyberLink YouCam software for your notebook: Cyberlink YouCam software.
Can you please tell me if there is a version of the currently installed YouCam software and the webcam works in this software?
Also, check in Device Manager for devices of imagery for any conflict with the webcam. It should display with no X,!, or? symbols on the appliance.
You can also restore the laptop to before the show began. You can do this by tapping F11, while the laptop turns on to access the HP Recovery Manager and selecting the restore option.
Let me know if it works!
Maybe you are looking for
-
Satellite P300-1 c 7 - impossible to install the audio driver
Hello!I need help! I want to find the driver for the sound (Satellite P300-1 to 7, Windows XP). When I download the driver called "sound driver" of your site, my laptop gives me the trace message that the device for the driver cannot be found. Could
-
Needs of all drivers of Windows XP Home for Satellite L40-14B
Hello. I have Satellite L40-14 b and I need drivers for Windows XP Home edition... .can someone help me pls? TNX
-
Does anyone know what adapter dual band is compatible with HP 17-f121ds
-
RALink RT5390R 802.11bgn Wi - Fi adapter has driver problems
Hello friends, and HP Is no longer, I can connect to the internet via wi - fi. In case of problems (by ethernet connection), I get the following error: The Ralink RT5390R 802.11bgn Wi - Fi adapter knows or material associated with the problem driver
-
Bildschirm soll nicht installed breast There're eine Lösung oder muss ich damit "leben"? danke fur eure antwort