Case, but the screen is still in

Similar Questions

• Satellite A300 - system still works, but the screen is blank

  Hello

  I was downloading an update of tempro toshiba (synco or something in that sense) for my laptop Satellite A300 and the frozen screen. I pressed the power button for 5-10 seconds until it is turned off. When I turned it the system seemed to work but the screen is completely black.

  I tried to remove the battery, and fn + F5 but the screen still won't turn on.

  Any help or advice would be appreciated.

  Rob.

  Hello

  It happened because of the updated BIOS, or during the common software update?
  In case it was an update of the BIOS I recommend contact the ASP in your country, because it seems that the ROM module must be flashed again.

  If it happened during a common software update, so I advise to remove the battery and the AC adapter and wait an hour.
  Then reconnect the two parts and check to see if you could power the laptop properly!

  Check it out!

• Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

  He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.

• We try to use Adobe Photoshop Lightroom 4 on a new laptop with Windows 10.  Everything on the screen was to small to use.  I got the picture to the center of the enlarged screen, but the words on the side of the screen are still too small to read

  We try to use Adobe Photoshop Lightroom 4 on a new laptop with Windows 10.  Everything on the screen was to small to use.  I got the picture to the center of the enlarged screen, but the words on the side of the screen are still too small to read

  kathleenl62675526 wrote:

  Hi Tanuj,

  There is no place to change fonts.

  You must go to the LR Edit (or Lightroom on Mac) menu > Preferences > Interface > choose 'Options' in the menu 'panels '. There should be a setting for the font size of Interface. You will need to close and restart LR for the font change are taken into account.

• Satellite L40 is power on but the screen is blank

  Can someone help me with a problem?

  I'm not a computer expert and my laptop won't do anything. If I put power turns on but the screen remains blank

  Hello

  Try this:
  -Remove the battery and unplug the AC adapter from the portable computer
  -wait for about ~ 40 min and reconnect the two parts
  -then try to turn on the laptop

  If this does not work and the laptop does not start in windows OS, then you could try to insert a bootable recovery disk Toshiba and could attempt to reinstall new OS.

  If the procedure still does not have a hardware malfunction is possible, and in this case only the authorized service provider would be able to help.

  Good luck

• Dell computer laptop starts but the screen does not light

  Hello

  I have a laptop Dell older (studio 1558) and when I used it the other day, 'static' filled monitor image and then the screen went completely black.  Now when I turn it on, it seems that the computer starts well but the screen is black.

  Get yourself an external monitor, easy solution, right? -bad.  Unfortunately when I plugged my laptop in a separate monitor, the monitor (which works fine) showed no images.

  Still, I had this laptop for a few years.  I see about being 'easy' opening and closing of the laptop.  This has been the case in recent years, however, so I don't know if something has finally given...

  I'm not the best computer savvy so sorry if I was not more detailed... any ideas, what is wrong and how do I fix?  I rather would not somewhere that make me fixed.

  You will probably get a better response if you re - post it in the forum of the laptop and mention the version of Windows, too. (This is the forum office.)

• My iPhone my iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked

  My iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked

  You should go to the apple store and ask them to check it for you! You may have a faulty screen or faulty motherboard! in any case it is best to call or go to the apple store

• Satellite X 200 - 15 K power on but the screen is black

  Hello

  I have Toshiba Satellite X 200-15 K, two days ago, I have problem with screen, the screen I have noise, I think it's the same error in my display driver and I have stop near windows xp and try to after 1 min, but the screen has more noise when the startup boot image and I stop by button / stop on laptop.

  Then do what I ve tried again to turn on my laptop but on the screen, I see only artifacts (same squadrons of colors) and after that, my laptop can not work, I tried to power on him but I only power led and HDD light works only 5 sec and after off the coast, and the cooler works 5 sec too and after offshore.

  I tried to remove the battery and the RAM and the wireless and all that I can :), but nothing happens, but when I try to power without RAM I see on power light beep two red and two yellow (IE my motherboard work).

  Maybe it can help me. I think I have dead motherboard.
  And for me, it is interesting that someone may have similar problems.

  Thank you.

  P.S Sorry for my English :)

  Hello

  Let's summary.
  You had a few artifacts on the screen, and now, you are not able to start the unit.
  Nothing appears on the screen; Neither the Toshiba start screen appears is good?

  Hmm seems material issue I m thinking about GPU (graphics chip).
  What do you think of this?

  If it's really a problem of graphics card, then you will need to replace the motherboard.
  In most cases the chip belongs to the mobo anyway... something like this can be done by an ASP in your country.

  Then please get in touch with the guys to get more details about this

  I wish you good luck

• Equium A300D - 16 c turns on but the screen does not show anything / remains black

  Hi, I have a laptop Toshiba Equium A300D - 16 c.

  It was fine until now...

  When I press the power button, my laptop turns on but the screen remains black / off.
  The indicator disk HARD is not Flash or anything... (in case that helps)
  I also tried to remove the battery, hold the power button for 30 seconds and then reconnect the power cord... Same laptop turns on but the screen is black.

  I tried to connect my laptop to my PC using a HDMI cable screen, but without success... Laptop turned on but monitor my pc showed nothing.

  I have not changed anything inside my computer laptop or unscrewed it.

  PS:
  Quite often, I kept my laptop on the bed/pillow it may have something to do with overheating or something.

  How did I get to this point:

  Yesterday, my laptop was fine, there was nothing wrong with her... I turned off during the night, but when I tried to turn it on this morning it is where I have faced this problem.

  Any help would be appreciated.

  Thank you very much
  Rejanu.

  Long ago, I had similar problem on my old Satellite. CPU was faulty. After replacing the CPU, everything was OK again.
  I put t really know what to say.
  Maybe you should contact Toshiba and let check your laptop. They have diagnostic tools and may know what is the problem.

  What do you think?

• Qosmio X 770 turns on but the screen remains blank

  So my Qosmio X 770 turns on but the screen remains blank, it was randomly turning every so often, but now it is just blank.

  The hd works fine again, I tried to plug it into a TV to see if it works, but no signal is found. I was informed by a friend that it could be a problem with the graphics card, I wonder if it can simply be exchanged if I buy a new one or if he joined, and I have to replace the whole motherboard?

  Any help would be appreciated.

  Even if the HARD drive is faulty, the laptop should be able to IT and you should see the home Toshiba on the internal display screen.
  If its definitely NOT drive HARD problem.

  You said that you have connected the laptop to the TV. You see the start of Toshiba on the external monitor (TV) screen? Are you able to access the BIOS by pressing F2?

  If this is not the case, there is certainly a hardware problem.
  It could be a fault of memory modules, graphics card or the same motherboard malfunction could be possible.

  GPU problems or the motherboard, the whole motherboard must be replaced and that's expensive fix because mobo belongs more expensive laptop.

• My pavilion G6 - 1210 SA goes in but the screen is not

  Hello

  I tried. Turn on my g6 last night and it works but the screen is not the fan starts and the lights are normal, I tried to take the battery. Out and adapter and the second fact 30 thing that did not work, I tried without the battery and still nothing at one point it seemed that updated operating system running but the screen does not (windows 7) any help would be great because I have a lot of work to do on my laptop

  Hey AJ2106,

  First of all, I wish you welcome on the HP Forums!

  Like your laptop is by train (heard the noise of the fan and LED is lit), but the screen remains black, I suggest you to watch the following document 'computer won't start (Windows 7, Vista, XP)'. Now, this document you have already done the hard reset so you won't have to do it again once, but the part you want to follow the steps, is symptom: LEDs flow, the fan noise is heard, but the display is black or white.

  Please let me know the results of the troubleshooting steps.

  Looking forward to working with you!

• Unable to print using HP Officejet 4500 but the screen displays "BUSY".

  Through 'troubleshooting' and are still unable to print. The Start button flashes as usual, then nothing. BUT the screen displays "BUSY".

  OT:OfficeJet 4500

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  1. what operating system is installed on the computer?
  2 have. what troubleshooting measures you tried?

  You can download the drivers for the printer based on your operating system from the link provided below.

  Software & Driver Downloads HP Officejet 4500 all-in-One printer - G510a

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3919448

  For more information about troubleshooting steps, see:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.

• 520 TouchSmart all-in-One begins, but the screen is black.

  Hi all

  I had a Touchsmart 520 for 2.5 years (warranty expired it y a.5 year) and enjoy a lot of the computer.

  One day the screen flicked once, and since then, he's black.

  The computer is still active. I can turn it on and can be accessed via the network.

  The problem is that the screen.

  I ordered a new screen from ebay, but of no use. I got a new MB, but always the same question.

  I even tried to take graphics cards out there (as I thought Valentine's) and I tried to use the support of the onboard graphics, but still no use.

  So, new screen + Mo + LED backlite, the computer is running, but the screen is black.

  One to the rescue?

  Thank you

  Roye

  Hello again Roee,

  Thank you for the updated information and I can actually respond directly to the question of how it is connected. You're right it's the LG 6pin cable that provides power to the converter card, while the backlight is also connected to the converter card. I am providing you with a link to the list of HP parts store the parts of your computer where you can see the part number 654251-001 - rear panel light FFC (LG 6pin) 250 mm. You will also see the part number 653864-001-23 converter card which you may need to replace.

  You can also buy the parts there, too, if you wish.

  I was unable to locate the manuals or documents that would give you clear instructions on how to properly install the BACKLIGHT, but you can follow the basic steps in reinstalling the converter card that I have set out below:

  Step 1. Gently detach the connectors of power and backlight of the Board of Directors
  Note that the location of the connector backlight will vary according to the manufacturer of Panel
  Step 2. Remove both screws of the card and pull the jury on the PC
  Step 4. Align the two holes on the plate with the spacers inside the unit
  Step 5. Replace the two screws of the Commission of the converter
  Step 6. Replace the connectors of power and backlight to the Board of Directors
  Step 7. Set the DIP switch on the Board to match the configuration for panels manufacturers

  The configuration of the DIP switch for each manufacturer of Panel is painted stencil on the converter card itself

  Please re-post if you need extra support. Thank you again for post you on the HP Forums. Have a wonderful day!

• Get BSOD under control of bug, I found the issue was csrss.exe. I uninstalled the video drivers intel, but the machine is still crushing.

  Hello

  I Keep getting this blue screen under bug death check I found that the issue was csrss.exe. I uninstalled the video drivers intel, but the machine is still crushing.

  https://onedrive.live.com/redir?RESID=BE2C45CEFD325C95! 162 & authkey =! AKZFqC6arezz-QI & ithint = the file % 2czip

  I join the crush dump files.

  Kindly help.

  First, you must upgrade to the Service Pack-1

  Service pack 1 update.
  
  http://Windows.Microsoft.com/installwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
  
  Additional resources:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  After that, if you're still crashing

  These accidents were related to the corruption of memory (probably caused by Kaspersky).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.

  In other words STOP! If you don't know what it means that you're probably not  

  
  

  
  

  1-Driver Verifier (for full instructions, see our wiki here)

  
  2-Memtest. (You can learn more about running memtest here)

• I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade and fade out and the yel

  I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade in and fade out and the yellow line that chart volume takes a strong recovery or dip at the beginning or at the end of the clip, but there is no change in volume when I play back. What I am doing wrong?

  Rickey

  Thanks for the follow-up report.

  Just a lit bulb. Maybe the answer, maybe a spleen.

  Look carefully at the audio track of the timeline in the vicinity of title of the file.

  

  The title of your file audio timeline shows: level of Volume or something else. If something else, click the tiny triangle where

  the red arrow in the screen shot is sharp and select the Volume and then level so that you end up with

  Volume: level as shown in the screenshot.

  Hope it's the factor involved.

  RTA