cataloged table 1 d as 2D?

I have a set of screws, which accepts an array as input 2D.  In some cases, that the table entries will be 1 d instead of 2D.  Is it possible to convert this table 1 d in the form of a 2D array, so that I don't have to write new screw (or add structures business to the current VIs) for this particular case?

Thank you

Allan

Tags: NI Software

Similar Questions

  • OIM 11g R2 - twice more entries of catalog

    Hello

    I use OIM 11 g R2 PS2. By chance, I checked my catalog and all my roles found twice.

    I have checked the CATALOG table in DB and you can find roles twice.

    No idea why my roles are stored twice in the catalog?

    You can try to re-run the catalog synchronization task and delete the timestamp and type the Full value.  See if that will update the data.

    -Kevin

  • RMAN clean old entries AL table

    Hello
    I notice there is always old (according to the defined policy) entries in the AL table:
    SQL> desc rman.al
 Name                                                              Null?    Type
 ----------------------------------------------------------------- -------- --------------------------------------------
 AL_KEY                                                            NOT NULL NUMBER
 DBINC_KEY                                                         NOT NULL NUMBER
 AL_RECID                                                          NOT NULL NUMBER
 AL_STAMP                                                          NOT NULL NUMBER
 THREAD#                                                           NOT NULL NUMBER
 SEQUENCE#                                                         NOT NULL NUMBER
 LOW_SCN                                                           NOT NULL NUMBER
 LOW_TIME                                                          NOT NULL DATE
 NEXT_SCN                                                          NOT NULL NUMBER
 NEXT_TIME                                                                  DATE
 FNAME                                                                      VARCHAR2(1024)
 FNAME_HASHKEY                                                              VARCHAR2(20)
 ARCHIVED                                                          NOT NULL VARCHAR2(1)
 BLOCKS                                                            NOT NULL NUMBER
 BLOCK_SIZE                                                        NOT NULL NUMBER
 COMPLETION_TIME                                                   NOT NULL DATE
 IS_STANDBY                                                                 VARCHAR2(1)
 STATUS                                                            NOT NULL VARCHAR2(1)
 DICTIONARY_BEGIN                                                           VARCHAR2(3)
 DICTIONARY_END                                                             VARCHAR2(3)

SQL> select count(*) from rman.al;

  COUNT(*)
----------
    808724

SQL> select min(LOW_TIME) , min(COMPLETION_TIME) from rman.al;

MIN(LOW_TIME)       MIN(COMPLETION_TIME
------------------- -------------------
2010-04-07 20:31:41 2010-04-07 20:32:03
    How to clean these entries through the rman interface?
    I'm talking about the catalog version 10.2.0.4.
    Concerning
    GregG

    Assuming that these archivelogs have the status of "DELETED" using script

    $ORACLE_HOME/rdbms/admin/prgrmanc.sql

    to delete the entries.

    RMAN itself does not directly remove the entries in the catalog tables.

    Werner

  • VS2010 ORA-00942 table or view does not exist

    I have
    -vs2010 professional
    -.net 4.0 Framework
    -ODTwithODAC112021
    -oracle 10g databases


    When I try to display 10 using ODP.NET oracle databases in Server Explorer, I get the error: ORA-00942 table or view does not exist. The "Tables" folder cannot be extended. I can see views and other records. I am able to run a select statement of the query of existing table in the query window also. Default filter setting is to show all under the scheme. I uninstalled and installed ODT several times and got the same results.

    This is the case even when I try to add a new source of data oracle by using the wizard. He threws the same error.

    There is no error if I use the .net data provider to connect to the same oracle server and add a new data source.


    Can anyone help please? Thank you very much!

    Published by: 850347 on April 6, 2011 10:45

    [Update] found that this error is associated with a particular account & schema. This account is super powerful and the database is enormous. I can connect with another read-only account and see all the tables in the previous scheme of powerful.

    Is anyway to see what table or view has caused this error? The error message is really not that useful here.

    Published by: 850347 on April 6, 2011 12:24

    While the user is "super powerful", it seems, there is no access to a catalog table that ODT must be metadata about the schema.

    You can understand the table by running a trace ODP.NET:

    (1) close VS2010
    (2) in the registry of windows, change the registry value \\HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ODP.NET\4.112.1.1\TraceLevel to 1
    (3) restart VS2010
    (4) reproduce the ORA-942 only
    (5) close VS2010
    (6) to cancel the registry value (set to 0)
    (7) in the file generated (c:\odpnet2.0.trc) do a search for "942", I hope that you can find. Just before the error, you should see the SQL code that was executed.

    Please post an update here to let us know what you find.

  • Essbase Studio Configuration error

    Hello

    I installed 11.1.2.3 on a Windows 2003 vritualbox image using Oracle Express as a DB... Everything works well except the Essbase studio service stops after 10 seconds.

    • My diagnostic reports is unique back red section follows:

    Validate the connection to the server of Essbase Studio

    Error: The network communication with the server failed. Check your network connection and try again.

    Recommended action: start the application.

    • My server.log (E:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\EssbaseStudio\server.log) shows the following message:


    [2014 01-25 T 19: 48:04.980 + 01:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.config] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.config.RegistryManager] [SRC_METHOD: getProperties] configuration of server Studio properties are extracted from the register of the Oracle.

    [2014 01-25 T 19: 48:05.089 + 01:00] [hyperion] [NOTIFICATION] [] [com.hyperion.cp.config] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.config.PropertyManager] [SRC_METHOD: loadProperties] server configuration file: E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties.

    [2014 01-25 T 19: 48:05.136 + 01:00] [hyperion] [NOTIFICATION] [ESSSTD-183054] [com.hyperion.cp.server] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Logger configuration file: E:\Oracle\Middleware\user_projects\epmsystem1\BPMS\bin\logging.xml.

    [2014 01-25 T 19: 48:05.136 + 01:00] [hyperion] [NOTIFICATION] [ESSSTD-183044] [com.hyperion.cp.server] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] switch.

    [2014 01-25 T 19: 48:05.136 + 01:00] [hyperion] [NOTIFICATION] [ESSSTD-183045] [com.hyperion.cp.server] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.server.ServerMain] [SRC_METHOD: initServer] Oracle Essbase Studio Server. The version 11.1.2.3.000, Build 4386, March 26, 2013. Copyright © 2008-2013, Oracle. All rights reserved

    [2014 01-25 T 19: 48:06.636 + 01:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11002] [oracle. EPMAUDITCLIENT] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] wrong enable state of the customer

    [2014 01-25 T 19: 48:06.667 + 01:00] [EPMAUDITCLIENT] [NOTIFICATION] [EPMAUDClient-11000] [oracle. EPMAUDITCLIENT] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] Audit Client has been created for the product HUB - 11.1.2.0

    [2014 01-25 T 19: 48:20.480 + 01:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] could not load the driver for sap.

    [2014 01-25 T 19: 48:20.480 + 01:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] could not load the driver for teradata.

    [2014 01-25 T 19: 48:20.480 + 01:00] [hyperion] [WARNING] [ESSSTD-144002] [com.hyperion.cp.driver.util] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.driver.util.DriverClassLoader] [SRC_METHOD: < init >] could not load the driver for netezza.

    [2014 01-25 T 19: 48:21.183 + 01:00] [hyperion] [ERROR] [ESSSTD-043002] [com.hyperion.cp.catalog] [host: w2003] [nwaddr: 10.0.2.15] [tid: 10] [user name: System] [ecid: 0000KFAihIJDwW05zzWByW1It0RU000000, 0] [SRC_CLASS: com.hyperion.cp.catalog.Catalog] [SRC_METHOD: initialize] Catalog.CannotInitializeStorage = Cannot initialize catalog storage. Make sure that the server.properties file contains the correct information. [[

    com.hyperion.cp.catalog.exceptions.CatalogInitializationException: catalog. CatalogInitializationException.StorageInitializationFailure

    at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:252)

    at com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64)

    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:106)

    at com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:198)

    to com.hyperion.cp.catalog.Catalog. < clinit > (Catalog.java:81)

    at java.lang.Class.forName0 (Native Method)

    at java.lang.Class.forName(Class.java:169)

    at com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:71)

    to com.hyperion.cp.server.RequestListener$ SystemTask.run (RequestListener.java:1507)

    at com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:233)

    at com.hyperion.cp.server.RequestListener.init(RequestListener.java:174)

    at com.hyperion.cp.server.ServerMain.initServer(ServerMain.java:214)

    at com.hyperion.cp.server.ServerMain.main(ServerMain.java:296)

    Caused by: java.lang.reflect.InvocationTargetException

    at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)

    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)

    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)

    at com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:246)

    ... 12 more

    Caused by: com.hyperion.cp.catalog.exceptions.CatalogInitializationException: the database 'SYSTEM' does not contain the tables in the catalogue of Studio. Please check the value of the "catalog.db" parameter in the server.properties file.

    at com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:151)

    to com.hyperion.cp.catalog.storage.StorageEngine. < init > (StorageEngine.java:95)

    at com.hyperion

    • If I watch the server.properties for Studio (E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\server.properties) file then it is empty, except a headerline saying enties here are used to override the settings?
    • I rerun the EPM system configurator, but that made no difference.

    Anyone have any idea that I could do to fix this?

    Thanks in advance

    Erik

    In 11.1.2.3 the server.properties moved into the registry:

    11.1.2.3 version, Essbase Studio following server properties are stored in the registry of Oracle Hyperion Shared Services:

    • server.css.URL
    • Catalog.URL
    • Catalog.Password
    • server.httpPort
    • Catalog.UserName
    • Catalog.DB
    • transport.port
    • server.hss.bpmApplication
    • Server.DataFile.dir

    "The 'SYSTEM' database contains no Studio catalog tables. Check the value of the "catalog.db" parameter in the server.properties file. »< i="" wouldnt="" recommend="" using="" the="" system="" user="" for="" the="">

    See you soon

    John

    http://John-Goodwin.blogspot.com/



  • Confusion between the physical schema definition MSSQL Server

    Hello

    I'm learning ODI 11 g and I am currently working under the physical definition of the schema under topology Navigator. I want to import data from MS SQL Oracle Server; I have defined the source (MSSQL Server) and target servers (Oracle). Testicles of connections and that they are working correctly.

    When you set the physical schema for MS SQL server I am confused with the following fields. Can someone help me understand its use here? I'll be very grateful

    (1) database (catalogue)
    (2) owner (schema) here I read-only user which I already defined as part of the definition of the SQL Server. It does not appear in the list.
    (3) database (catalogue of the work)
    (4) owner (scheme of work)

    Best regards
    Muhammad

    >

    Work catalog database is the location of the temporary objects of ODI (for example, C$, $ I, I have$ tables etc.)
    == I use a single user reading to read the data. How ODI creates temporary objects in SQL server. My work and master repository is the Oracle database.

    Temporary tables are used for a number of things, remember that at this moment in the topology - ODI don't know if your connection to the SQL Server is a source or a target, so he wants all the details, just in case. Reasons for Temp of source tables might be:
    Source of the joins of tables in different data sets with a staging expliitly, set on the source.
    Format (change data capture) objects - Tables to langer, newspaper views (items of $ J) etc.
    If you use only MSSQL tables as sources, you proably find no temporary object created side soruce, arrays of C$ will go into the scheme of work target (in this case, Oracle) that the I'll tables$. So in your case, it's normal.

    Scheme of work is the owner of the database value (catalog of the work) - once again, usually of dbo.
    == use dbo as sys in oracle?

    Type-IIRC no matter what user to the sysadmin role that creates objects have these objects as dbo by default.
    Im not MSSQL DBA if.
    Think of it as a qualifier that ODI will use when generation code selection based on the mappings of interface (for example select database.catalog.table xyz) etc.

    Hope that helps

    Published by: PeakIndicators_Alastair on May 14, 2013 08:53

    Published by: PeakIndicators_Alastair on May 14, 2013 08:54

  • transaction in a procedure

    Hello
    I've implemented this procedure but I don't know about the syntax.
    I have 4 operations. The examples I've looked at don't seem to have the 'end' between each transaction. I don't know how word error messages, I have I don't have one, when you insert values.
    I think I have the right to record.
    An example I looked said to name the transaction as I did and the other example said to set the name of the transaction to 'rollback_rs1.
    Is how important it?
    I have to name each transaction (1,2,3,4)? I do not think, but yet again, I'm not sure.
    I use oracle 10.2.0.3
    Here is the table, it is emptey at this time.
    {code}
    Catalogue of DROP TABLE CASCADE CONSTRAINTS;
    CREATE TABLE catalog
    (NUMBER OF NOCS,
    Varchar2 (25) CTITRE,.
    CREATED_BY varchar2 (30),
    CREATED_DATE date,
    UPDATED_BY varchar2 (30),
    Date of UPDATED_DATE);
    {code}

    my surgery is lower with comments where I don't know if I'm right.
    -It comes to question3. create a procedure
    -who will perform the operations of insertion of values in the catalog table.

    {code}
    CREATE OR REPLACE PROCEDURE week_11
    Start
    Set transaction read write catalogue name - is that correct?

    Insert into catalog
    VALUES ("cmis420", "Advanced Relational Database", "Bill Warren', sysdate,"Jean Todd", sysdate);
    Insert into catalog
    VALUES ('CMST385', 'Introduction to XHTML', 'Terry Woods", sysdate, 'john Miller', sysdate);

    SAVEPOINT cmis420_cno;

    EXCEPTION - is this true or do I have to use the clause "IF"?
    while others then
    dbms_output.put_line (SQLERRM);
    Rollback; -If an error occurs rollback.
    -I don't know how to do this part... display message if an error occurred, then roll back the transaction.

    Insert into catalog
    VALUES ('cmst170', 'Introduction to XML', ' richard Jones, sysdate, 'Mary Smith', sysdate);
    Insert into catalog
    values ('CMIS315', "Programming in C++", "richard Jones, sysdate, 'Paul Todd', sysdate);
    SAVEPOINT cmst170_cno;
    exception
    while others then
    dbms_output.put_line (SQLERRM);

    Rollback; -If an error occurs rollback.
    -I don't know how to do this part... DisplayMessage if an error occurred, then roll back the transaction.


    Insert into catalog
    values ('CMIS111', ' Social Networking and cybersecurity best practices, "Terry Woods", sysdate, 'john Miller', sysdate); »
    Insert into catalog
    values ('CMIS125', in Programming', sysdate, c# ', "richard Jones, sysdate, Peter Greenburg, sysdate);
    SAVEPOINT cmis111_cno;

    exception
    while others then
    dbms_output.put_line (SQLERRM);

    Rollback; -If an error occurs rollback.
    -I don't know how to do this part... display message if an error occurred, then roll back the transaction.


    Insert into catalog
    values ('CMIS225', 'Windows Presentation Foundation (WPF) development', "George Allen", sysdate, 'Richard Jones' sysdate);
    Insert into catalog
    values ('CMIS465', 'Software' and Validation, sysdate, 'Bill Warren', sysdate, "Jean Todd");

    SAVEPOINT cmis225_cno;

    exception
    while others then
    dbms_output.put_line (SQLERRM);
    backup restore point cmst170_cno; -If an error occurs rollback transaction 2 using the restore.
    -I don't know how to do this part... display message if an error occurred, then roll back the transaction.
    end;
    commit;
    {code}

    I appreciate any help you can give
    kabrajo

    Published by: BluShadow on August 15, 2011 13:00
    Add tags {noformat} {code} {noformat}. Please read {message identifier: = 9360002} to learn how to do it yourself.

    Closer-
    If you want an exception handler in the inserts, you use this structure:

    BEGIN
    (your code, inserts, whatever)
EXCEPTION
     WHEN (what you are trapping)
END;

    If you are missing this syntax.

    Insert into catalog
    VALUES ("cmis420", "Advanced Relational Database", "Bill Warren', sysdate,"Jean Todd", sysdate);
    Insert into catalog
    VALUES ('CMST385', 'Introduction to XHTML', 'Terry Woods", sysdate, 'john Miller', sysdate);

    EXCEPTION
    WHILE OTHERS THEN


    DBMS_OUTPUT. Put_line (' error insertion class: ': substr (SQLERRM, 1, 75));
    ROLLBACK;

    I don't know your needs, but you should review the logic here and see if that's really what you intend to happen. You do: insertion of 2 lines. If there is an error message on the screen. Then, because ERROR has BEEN HANDLED, your program will pronounce on the next 2 inserts, etc. If that's what you intend, very well, but from my experience, this is not the typical requirement.

    It is also very important out of the habit of using SO many OTHER as your exclusive exceptions management method. Much more appropriate in this case would be:

    WHEN DUP_VAL_ON_INDEX THEN    (whatever particular error you might raise)
     (insert or whatever)
WHEN OTHERS THEN
     (code for something unexpected)
END

    If you have access, I highly recommend you PL/SQL of Steven Feuerstein, programming books - starting with "Oracle PL/SQL Programming" - they are very clear, use step by step explanations syntax and correct usage and I think I have more information on the net that you can download to use with examples in the book. I learned all that I know (PL/SQL) Steven. This can reduce the confusion see several examples that have discrepancies in the documentation.

    Good luck!

  • control file

    Hello
    I created three files, ctl, variable length data file file and a file that contains a table named CATALOG.
    However, the CTILE field must be possibly quotes. I do not know if I put them around the title in the data file or should I put a condition in the ctl file?
    Can I use a single insert in the ctl file to load all 6 files?
    I appreciate if anyone can help.
    Here is a sample of my files.
    CTL file:
    load data
    INFILE 'kmanos_catalog.txt '.
    Insert
    IN the catalog TABLE
    completed field by «,»
    WHEN CTILTLE! = ""
    (CTITRE, CREATED_BY, CREATE_DATE, UPDATED_BY, UPDATED_DATE)

    Insert
    IN the catalog TABLE
    completed field by «,»
    WHEN CTILTLE! = ""
    (CTITRE, CREATED_BY, CREATE_DATE, UPDATED_BY, UPDATED_DATE)

    Insert
    IN the catalog TABLE
    completed field by «,»
    WHEN CTILTLE! = ""
    (CTITRE, CREATED_BY, CREATE_DATE, UPDATED_BY, UPDATED_DATE)

    Insert
    IN the catalog TABLE
    completed field by «,»
    WHEN CTILTLE! = ""
    (CTITRE, CREATED_BY, CREATE_DATE, UPDATED_BY, UPDATED_DATE)

    Insert
    IN the catalog TABLE
    completed field by «,»
    WHEN CTILE! = ""
    (CTITRE, CREATED_BY, CREATE_DATE, UPDATED_BY, UPDATED_DATE)

    Insert
    IN the catalog TABLE
    completed field by «,»
    WHEN CTILE! = ""
    (CTITRE, CREATED_BY, CREATE_DATE, UPDATED_BY, UPDATED_DATE)


    table of the catalog:
    CREATE TABLE catalog
    (Varchar2 (25) CTITRE,)
    CREATED_BY varchar2 (30),
    CREATED_DATE date,
    UPDATED_BY varchar2 (30),
    Date of UPDATED_DATE);

    kabrajo
    data file:
    Adventure, Miles Warren, of SYSDATE, of Mike Baker, of SYSDATE
    Mystry, Sally Richards, SYSDATE, Richard Miller, SYSDATE
    Romance, Tim Harvey', SYSDATE, Harry Pearson, SYSDATE,.
    Horror, Joan Casteel, sysdate, Terry Woodwin, sysdate
    History, Tom Butler, November 30, 1864, William Beard, 5 June 1923
    Drama, Jean Coles, 22 January 2002, Jerry walls, May 15, 2011

    First of all, 10.2.0.3 don't is not supported on Windows 7 - only 10.2.0.5. See http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF

    Second, you must read through SQL * Loader documentation - just an INSERT command, not one per registration type - http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/ldr_control_file.htm

    Third, "possibly closed" means exactly that - the specified field can or cannot be locked by the specified delimiter - see http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/ldr_field_list.htm#i1007836

    HTH
    Srini

  • tab panel accordion Spry, link to a page of diferent

    Hello

    I have sort of a section of my site catalog of a few pages, one for each category in my catalog (tables, chairs, lighting, etc.).

    Each of these pages has a spry accordion, which looks the same on all pages.

    When I click on the tab of the Panel accordion, accordion (for this category) Panel content arises, which is very good.

    But when I click on the Accordion Panel tab, I would, first of all for this page is displayed, then for the accordion panel content appears.

    This is what happens:

    I am on the page TABLES. When I click on the Panel accordion tab "CHAIRS" the Panel content Accordion with the different types of Chairs opens / shows, but I'm still on the TABLES page.

    I would like this brings me to the page of CHAIRS without having to choose one of the sections content panel.

    I can't be able to do it with a simple link.

    What should I do?

    Thank you.

    It seems that you have to attach an event onclick (see below)

    At the point where your code probably looks something like:

    Chairs

    You must encapsulate the AccordionPanelTab

    in an anchor as tag below:

    Chairs

  • Problem with CASE expressions

    Using Oracle 10 g R2, plsql in SQL Developer (or TOAD). I have a question 'simple' with the criteria 'complicated' in where clause.
    So, it's something like this:

    Select the fields in a table
    where stuff like Upper(:CategoryId) | '%'
    and sub_category_id like Upper(:SubCategory). '%'
    and order_date > =: StartDate
    and order_date < =: EndDate
    and division_id =: Division

    Up to this point, the query works fine. Here is where is the problem:
    If there is a value in the following parameter field, it works very well, but it is possible that the parameter is null, then I have to test for this first, and if it is empty (or even assigned a 'false' value) then it must restore all settings. The following parameter field is titled: SKU. The reason why I do this first place is to spend several values in a field of single parameter - comma which is great as long as there is some values...

    (This works with the above)
    and INSTR (Upper(:SKU), table.sku) > 0

    And I have a similar problem with another field in the table entitled: catalogue and as: SKU, it works very well if there is at least one input value.

    What I tried (who doesn't) is therefore:
    and as table.sku (BOX WHEN: SKU = '1' AND '%')
    Of OTHER INSTR (Upper(:SKU), table.sku) > 0
    END CASE)
    Same thing with the catalog:
    and as table.catalog (BOX WHEN: catalog = '1' AND '%')
    Of OTHER INSTR (Upper(:Catalog), table.catalog) > 0

    There must be a way to make this work. I will be grateful for any suggestions that would help in my situation.

    What is

    select s.sku,
        s.std_cost_ea,
        s.unit_price,
        o.QUANTITY,
        o.order_no,
        o.order_line
from f21.ffct_offer_product_sku s
inner join f21.fmkt_order_detail o
       on s.sku = o.sku
       and s.company_id = o.company_id
       and s.division_id = o.division_id
       and s.offer_id = o.offer_id
       and s.offer_year = o.offer_year
where s.category_id like Upper(:CategoryId) || '%'
and s.sub_category_id like Upper(:SubCategory) || '%'
and instr(Upper(nvl(:SKU,s.sku)), s.sku) > 0
and instr(Upper(nvl(:Offer,s.offer_id), s.offer_id) > 0
and o.order_date >= :StartDate
and o.order_date <= :EndDate
and s.division_id = :Division
and s.version_no = 0

  • Procedure call stored PL/SQL Oracle and an example of a query with parameter

    Hi gurus,

    I was wondering if anyone has an example/tutorial of

    (1) how to call a stored procedure in Oracle PL/SQL to Oracle BEA Fuego BPM (give credits to all :))
    -If you can go into details step by step that will be great. Especially on the variable mapping and in THE arguments.

    (2) how poiing on a simple table of DB. A step by step guide / tutorial.



    Arvind jegou
    Architect SOA/BPM to business
    CISCO, San Jose, CA
    [email protected]

    1 create the external resource, introspect in the catalog (tables, procedures,...) to your schema should appear, and if it is automatically stored procedure a method of appeal should appear in your catalog, then do slip and fall the calling code PBL method you.
    2 - with an automatic activity overall, you can establish how many times this activity is executed, then inside the activity, you put the code to run the poolling.
    It may be useful

  • Catalog cannot be displayed in a table element? Is it possible to do them in a format similar to an unordered products list unordered list?

    Hello to the BC community,

    As indicated above, catalog cannot be displayed in a table element? Is it possible to do them in a format similar to an unordered products list unordered list? Overall, I'm looking to create a sensitive site and I like what the general store looks like, I just want to set the flow of catalogue items as I can with products. List items would be great for a catalog item, but I can't seem to locate it in the documentation that comes with BC. I could be completely missing it and if I did, I'm sorry! Thanks in advance for any help I can get with this topic!

    You just need to change the options of the tags - the Developer Reference
    This is the last parameter of the tag.

  • Important RMAN linked tables in the catalog database.

    I want to check that database in RMAN backups completed successfully backend with a log file

    All online backups are holding tapes by TSM.

    Please help me in this regard.

    There are many points of view such as RC_BACKUP_CONTROLFILE, RC_BACKUP_CORRUPTION, RC_BACKUP_DATAFILE, RC_BACKUP_PIECE, RC_BACKUP_REDOLOG, RC_BACKUP_SET, RC_BACKUP_SPFILE. Check this

    Kind regards.

  • App Catalog does not work if the update is a Mute Point

    I spent in and set the date to July 1, 2013.    The App Catalog, after reboot, finally came without a yellow triangle next to him.  So I type.  Shooting specifications of Hp App Catalog with bar 'report a problem' at the bottom.  Upper left corner has software Manager tab, tap and get the search bar, then I type in the App Catalog update, to the right of the table has a box with "palm" in an orange circle that says 'coming soon' and to halfway to the bottom of the screen there is an empty box black 1 "that looks like something is missing from the page and that is that I get.  I tried to download the Pack "Care" or anything else in the App Catalog and get "the action could not be completed try again later" with a retry button.  He will never appear to try to do something.

    Hello and welcome to the HP support community!

    ttazfam wrote:

    I tried to download the Pack "Care" or anything else in the App Catalog and get "the action could not be completed try again later" with a retry button.  He will never appear to try to do something.

    It's always a good idea to look at the first few positions in each section of a Forum.  There are often 'FAQ' and "sticky messages" s that answer the most frequently asked questions.

    The second post we explained how HP ended their support for webOS devices:

    http://h30434.www3.HP.com/T5/WebOS-hardware-and-software/WebOS-cloud-services-to-end-3-15-2015-updated/TD-p/4614446/jump-to/first-unread-message

    WyreNut

  • How to export units catalog

    Hi all.

    How export/import a catalog unit based on the quantities? It is simply based in the desktop.ddd?

    Thanx.

    Normal
    0

    21

    fake
    fake
    fake

    OF
    X NONE
    X NONE

    MicrosoftInternetExplorer4

    / * Style definitions * /.
    table. MsoNormalTable
    {mso-style-name: "Table normal";}
    MSO-knew-rowband-size: 0;
    MSO-knew-colband-size: 0;
    MSO-style - noshow:yes;
    MSO-style-priority: 99;
    MSO-style - qformat:yes;
    "mso-style-parent:" ";" "
    MSO-padding-alt: 0 cm 0 cm 5.4pt 5.4pt;
    MSO-para-margin-top: 0 cm;
    MSO-para-margin-right: 0 cm;
    MSO-para-margin-bottom: 10.0pt;
    MSO-para-margin-left: 0 cm;
    line-height: 115%;
    MSO-pagination: widow-orphan;
    font-size: 11.0pt;
    font family: 'Calibri', 'sans-serif ';
    MSO-ascii-font-family: Calibri;
    MSO-ascii-theme-make: minor-latin;
    mso-fareast-font-family: "Times New Roman";
    mso-fareast-theme-make: minor-fareast.
    MSO-hansi-font-family: Calibri;
    MSO-hansi-theme-make: minor-latin;
    mso-bidi-font-family: "Times New Roman";
    mso-bidi-theme-make: minor-bidi ;}

    Hello punkmonkey,

    If you are working interactively, and if you change
    something in the unit catalogue DIAdem saves your changes automatically in the
    local user DIAdem desktop folder with the same name of the current Desktop file
    but the TUC extension.

    Using the script, you can use the commands 'UnitCatalog.SaveAs' and 'UnitCatalog.OpenExternalCatalog '.

    For the next version of tiara, it is planned to extend
    This feature and have a user interface for this.

    Greetings

    Walter

Maybe you are looking for

  • Time capsule failing set up airport

    Hello I have property in Spain with the following equipment; MacBook Pro 2013 Apple Time Capsule 2 TB airport Fibre optic ISP Jazztel/Orange 50 MB cable Jazztel DSL cable modem ZTE router provided Jazztel, model ZXHN H218N Unfortunately, the installe

  • Satellite L300-1AY recovery does not

    Hello I have a question about the recovery for a Tosihba Satellite L300-1AY with Windows Vista preinstalled.I wanted to grab my laptop and when I pressed F8 during startup I could choose Restore my computer. But after the game, I received a message-b

  • Measure the voltage and the temperature simultaneously with PCI-6281

    Measure the voltage and the temperature at the same time at the same time. However, when I put the voltage and temperature in a loop, the acquisition of voltage is significantly delayed. When I put the voltage and temperature in two different loop, n

  • my media center of windows has stopped playing tv and movies online need help fixing it

    my media center of windows has stopped playing any content online a month ago, I have to reach the point of signing in my sky ID and can press the play button but on all the videos I continues to redirect to "navigation to the webpage was canceled" b

  • Firmwire update hp pavilion dv4 showing consider replacing your battery

    I just updated the firmwire to the bios of my computer hp pavilion dv4-2165dx laptop and my battery display is consider replacying your battery, bur the information would rather avoid if doesn't happen. How can I turn off? TITLE: HP Notebook System B