Cause the v5.3 TCS Cisco - database consolidation write questions

Similar Questions

• How can I know because of what table in database, causing the chaining line

  Hello
  
  
  Please help me that how can I know because of what table in database, causing the chaining line?

  Hello

  hope that you have already created the table utlchain. Or otherwise create as below.

  SQL > @?/rdbms/admin/utlchain.sql

  And try to run the script again.

  I tried with the following example in the following link.

  http://psoug.org/reference/chained_rows.html

  His works very well and it will list the tables.

  Or try the row chaining and Migration of line [ID 122020.1]

  It has all the necessary steps to do so.

  Thank you
  Rognard

• Unable to connect to the web interface TCS

  Hello, I'm having a problem with a TC who left the factory of S5.3 current version. I can RDP into the Windows operating system without problem and access the web page of the OS on the port 8098 management no problem, but if I try to connect to the web application interface I get a name of user and password error.  any IDE on what is causing the problem?  the server was running fine until after a reboot.  Thank you!

  Hi Patrick, http:///tcs/#page:login&rescue:true method is used for the local administrator to log in if for some reason any when LDAP authentication is configured on TCS and local users cannot connect.

  ARO

  Mahesh Adithiyha

• Call TCS Cisco fails unexpectedly

  Hello

  I am facing a problem with the TCS, just make the call to TCS (point to point and call for the application of the MCU) after a specific time. Once that the appeal has not I can't see any videos stored in TCS for this problematic call as well.

  If it is an MCU at the request of appeal, only the TCS call leg will get fail other calls will remain as even. If I make a direct call to TCS alias after a point in time, it will fail.

  I use TC V5.1

  One of you faced a problem like this with TCS.

  Thank you best regards &,.

  Nikhil Jayan

  It could be that the engine of the content is blocked so it is impossible to treat the incoming stream of RTP. Hat happens then in a call of the CHT will claim that his record for 1 minute, then the call disconnects (no support received). This is normal on the TCS to disconnect the call if no support is received in a minute. Maybe a reboot of TCS services may solve the problem.

  / Magnus

  Sent by Cisco Support technique iPhone App

• What are the causes the listener to terminate?

  Hi all
  
  Oracle 9i
  
  We have this PROD database that works well for 3 years now. Then just today the listener suddenly dies, and when we start it and after an hour, dead me yet:(et parfois il l'habitude de démarrage.)
  
  What is causing the problem please. Based on your experience any idea what is the common reason why the listener died suddenly?
  

     Linux Error: 111: Connection refused
  
  LSNRCTL for Linux: Version 9.2.0.6.0 - Production on 01-DEC-2011 23:04:32
  
  Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
  
  Starting /u02/oracle/oaproddb/9.2.0/bin/tnslsnr: please wait...
  
  TNS-12547: TNS:lost contact
   TNS-12560: TNS:protocol adapter error
    TNS-00517: Lost contact
     Linux Error: 32: Broken pipe
  
  LSNRCTL for Linux: Version 9.2.0.6.0 - Production on 01-DEC-2011 23:06:48
  
  Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
  
  Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCOAPROD))
  TNS-12541: TNS:no listener
   TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
     Linux Error: 111: Connection refused
  Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=oel5.abc.local)(Port=1521))
  The command completed successfully
  
  LSNRCTL for Linux: Version 9.2.0.6.0 - Production on 01-DEC-2011 23:15:23
  
  Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
  
  Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCOAPROD))
  TNS-12541: TNS:no listener
   TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
     Linux Error: 111: Connection refused
  Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=oel5.abc.local)(Port=1521))
  The command completed successfully

  Thank you very much.
  
  Edited by: KinsaKaUy? the 1.12.2011 07:20
  
  Edited by: KinsaKaUy? the 1.12.2011 07:20

  KinsaKaUy? wrote:
  Hi all

  Oracle 9i

  We have this PROD database that works well for 3 years now. Then just today the listener suddenly dies, and when we start it and after an hour, dead me yet:(et parfois il l'habitude de démarrage.)

  What is causing the problem please. Based on your experience any idea what is the common reason why the listener died suddenly?

  Linux Error: 111: Connection refused
  
  LSNRCTL for Linux: Version 9.2.0.6.0 - Production on 01-DEC-2011 23:04:32
  
  Copyright (c) 1991, 2002, Oracle Corporation.  All rights reserved.
  
  Starting /u02/oracle/oaproddb/9.2.0/bin/tnslsnr: please wait...
  
  TNS-12547: TNS:lost contact
  TNS-12560: TNS:protocol adapter error
  TNS-00517: Lost contact
  Linux Error: 32: Broken pipe
  

  http://lmgtfy.com/?q=Linux+error+32+broken+pipe+

• Invalid SQL syntax causes the removal of the view

  I have found that when you change a view through SQL Developer, entering the syntax invalid SQL and hit 'Cancel' causes in my opinion should be deleted. Here are the steps that present this problem for me:
  
  1. create, save, and close a valid database view by clicking right "views" on the Connections tab and selecting «New view...» »
  2. open the view via a right click on the view and selecting ' Edit... »
  3 change to point to a non-existent table
  4 try to save, select "OK".
  5. when presented with an error message, click OK in the dialog box "Edit Error object.
  6. click on 'Cancel' in the window "Edit View".
  7. right click on the view, and then select 'open '. The "SQL" tab is empty, even though you can see the value in the "Columns" tab
  8. after refreshing, the view is a party.
  
  I looked under the problems known and searched the forum to see if it had been reported. Please let know us if there is some setting I can change to avoid this problem. I hope it's a bug, because I can't imagine the changes not saved, causing the removal of the view would be the desired behavior. Please find below my contact information of the environment.
  
  -Matt
  
  Details of the environment
  ==============
  
  The version of SQL Developer: 3.0.04 build HAND - 04.34
  DB version:
  Oracle Database 10g Release 10.2.0.4.0 - Production
  PL/SQL Release 10.2.0.4.0 - Production
  "CORE 10.2.0.4.0 Production."
  AMT for Linux: release 10.2.0.4.0 - Production
  NLSRTL Version 10.2.0.4.0 - Production
  Java version:
  Java version "1.6.0_16.
  Java (TM) SE Runtime Environment (build 1.6.0_16 - b01)
  The Client Java VM (build 14, 2 - b01, mixed mode, sharing)
  OS: Windows XP Pro SP2

  Yes.
  Changed to Bug 12334150: EDIT DELETED THE VIEW DIALOG box ON entering a not VALID AND the CANCELLATION of THE DIA SYNTAX

  -Rambeau

• Jump in the middle of an audio track streaming on various sites causes the stuttering and audio glitch

  Hello

  Please refer to this thread for support on the technical support of SoundCloud forums. The thread contains all relevant information, including videos of the screenshots problem and console, made by myself and others. https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox

  In short, when you try to move forward for streaming audio, there is a memory buffer/stuttering problem that prevents a correct reading of the track. This problem is confirmed on SoundCloud and Traxsource and other people in the support thread mentioned Mixcloud and other streaming sites. In other words, it is not the special streaming service fault or another.

  The problem does not occur in Microsoft Edge, Internet Explorer or Chrome. Well, to clarify, when the issue was published on SoundCloud support forums, Chrome was having the same problem. However, they made a version a few days ago thrust, that fixed it.

  Here's my original on the SoundCloud support post (less), which has the relevant details. Note that we have updated both Flash and Firefox recently, so although I have mentioned earlier in my original post, everyone involved has since updated their browsers and Flash.

  From now on, the only solution for the problem is to go back to Firefox 40.0.2. Thanks for any help =)

  Matt

  Original message =.

  Jump in the middle of a track causes the stuttering and audio glitch (Firefox).

  I am running Windows 10 Pro.

  There seems to be a problem of caching that affect reading - I started noticing this problem three or four days ago. Previously, I could jump through my feeds at will, go straight until the middle of the tracks or mixes of listen seconds and determine if I liked the track. Now, I can't do it on Firefox 41.0.1. The problem is simply annoying on songs that are 3 or 4 minutes in length, as I must leave "cache" maybe ten seconds before jumping. Unfortunately, the problem is a game-breaker on mixtures which, for example, are 90 minutes long. If I jump to a point directly in the middle of the combination, nothing happens. The play button alternates between the 'Play' symbol and the symbol of 'Caching' ('... "), and so audio resumes, it is glitchy and consists of different parts of the track being played at the same time.

  I've eliminated my internet connection as the source of the problem by loading on board. On the edge of 20.10240.16384, the problem does not exist. I can scroll down to any mix of 2 hours in my stream, click on the middle of it, and the audio starts right up. No caching, without stuttering or glitching.

  I drove back Flash version 18 to see if it solved the problem in Firefox, but it did not. The problem persisted, so I re-updated to Flash 19.

  Yes, I understand how all versions and updates to work. I meant it as a generation of powder magazine. My bad.

  I consider this problem to be solved. Several different pre-release versions of Firefox have solved the problem; I have personally used both of them that work perfectly. A representative of Bugzilla stated that the patch will be integrated into Firefox 42, which will be released on 3 November.

  https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox?topic-reply-list [Settings] [filter_by] = all & question-answer-list [parameters] [reply_id] = 16269116 #reply_16269116

  I now consider this private matter. Thanks to all of you who have been here =)

• Skype or last update causes the disconnection, accidents

  Have used Firefox for several years. Today, I was forced to upgrade to Skype 7.1. Immediately after the installation of Skype, Firefox would be is more to connect to internet or load web pages (tab "connection... ("say forever). Other applications and browsers work fine and there is no interruption to the internet connection of the PC. After about 2-3 minutes of this, Firefox will crash if left alone.

  After that, firefox.exe remains as a process and can never be completed. I try 'end process' and 'End process Tree' in the Manager of tasks without success.

  Firefox remains a task in the Manager of tasks forever, even when the browser window is closed. If I try to re - open Firefox from there, I get the error "Firefox is already running but is not responding". When I click on "Close Firefox", I get a new error message that says: "cannot load your Firefox profile. It may be missing or inaccessible. After that I'm 'OK' of this, I can't do anything else that to restart the computer to get rid of firefox.exe Manager tasks... and then the cycle repeats.

  Not sure if Skype is to blame that Firefox updated itself today. I blame Skype because it was the same Weird hanging in the Task Manager without ever closing until I disabled the video processing in Skype (and due to the suspicious timing).

  I tried clean re - installed, running Firefox with disabled modules and re - install Skype as well. Same behavior in all cases.

  Any suggestions? Note that I am submitting this from another machine.

  This may mean that a loaded program is causing the problem.

  What type of blocking programs do you use?

  Check the programs that are on your computer

  Windows: Start > Control Panel > uninstall programs.
  Mac: Open the folder "Applications".
  Linux: See your user manual.

  Go through the list. If you find something that you do not
  know what it is, use a search on the web.

  The problems of Firefox caused by malicious software {web link}

• What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?

  I get multiple research work emails (E/JS) and ecommerce. Some of them have a "Correct".
  'St. Michael Job Assistance Ministry - JAM' FA (SMJAM-JAM).

  For some reason, however, some of the emails from other sources, downloading the verizon pop3, E/JS server are indicated (wrongly) as having the FA SMJAM-JAM above. This situation prevents my email filters to plug these emails to their appropriate mail folder.

  Also, when the steps in order to transmit emails showing incorrect information of FA SMJAM-JAM, the e-mail is no longer present incorrect information of FA SMJAM-JAM but shows rather the correct information of FA that had been specified on the verizon pop3 server.

  address ROM"(FA) in some emails, when downloading from the pop3 server, is replaced by a 'common' 'FA '. [email protected]

  What would cause the "from address" info (FA). some emails, downloading the pop3 server, will be replaced by an 'f' 'common '?

  Hello

  If I understand your problem, I think it may have to do with the addresses stored in your address book. Thunderbird can display the name of your address book instead of the name of the post office, where corresponds to the e-mail address.

  Check your address books to see if you have a bad entry for mail addresses get listed wrong.

  Also check under Tools-> Options-> advanced-> reading & display if you have checked the option to see show it only the names of the people in my address book. If you uncheck this option, the name and the address must be...

• How to install the Codec OpenH264 of Cisco?

  I noticed that almost every time I start my computer and open every night I get a popup to download to download the codec OpenH264 by Cisco. I did and I noticed that there was an entry for it in the Add-ons Manager Plugins section and it says "will be installed soon. He had me download is a zip file which contained two files. The one who gave a short explanation of the codec and a libgmpopenh264.so file. Now, I have no idea what do with the .so to obtain file installed it in every night.

  Does anyone else have this problem and what can I do about it? I am running Xubuntu 14.04 64-bit.

  I see Pref media.gmp - gmpopenh264. * on the topic: config page.
  Media.GMP - gmpopenh264.path displays the installation path that points to the gmp-gmpopenh264 file in the Firefox profile folder.

  Bug 1009909 - Firefox desktop: integrate the media openh264 plugin in the Add-ons Manager
  Bug 1032814 - plugins Gecko media shouldn't use of well-known places for plugins

  There is also a media.gmp - manager. * Pref.
  https://wiki.Mozilla.org/GeckoMediaPlugins
  Bug 957928 - support of Plugins Gecko of the Media (GMP)

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• When Firefox crashes and restart is necessary, Firefox always try to open the same tabs that caused the failure before.

  I use tabbed browsing all the time. When I open a tab of a Web site that poses a problem, freezing Firefox (but not the computer), I find that I can delete the Firefox problem only by restarting the computer. I am so appalled to find that Firefox then tries to recreate the same set of tabs that caused the problem in the first place, causing Firefox freeze again. Usually I can get it out by closing Firefox and very long wait for Firefox to close completely so that it can be restarted again.

  This problem occurs in version 4.0 as well as in the latest version of 3 that I had. I remember that in some versions previous Firefox asks if you want to recreate your tabs or open in a new browser window. I always took the second option. This choice is no longer makes its appearance.

  Set the pref browser.sessionstore.max_resumed_crashes to 0 on the about: config to get page the on: sessionrestore page immediately with the first reboot after a failure has occurred or the Task Manager was used for the closing of Firefox.

  Which allows to deselect the tabs that you do not want to reopen, but will reopen the other tabs.
  
  See:

  • http://KB.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
  • http://KB.mozillazine.org/browser.sessionstore.max_resumed_crashes

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.
  
  You can use the filter at the top bar of the on: page config to more easily spot a pref.

• A key using self-powered USB causes the base station go "off-line".

  I found that by using a USB drive self-powered, as the WD My Passport, without a USB powered, hub attached to the base of the station USB port has caused the base station go "off-line". In fact, using a powered hub does not always remedy the situation, but it is more reproducible without one.

  This is true for the AirPort Extreme and Time Capsule 802.11ac. The problem does not occur immediately, but it may happen over several days. The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  My question is if others have had the same results? ... and did you find permanent solutions?

  

  USB key "seems" less reliable on the airports of AC model than on previous versions.

  I tend to not use USB attached to routers because I think it's convenient mediocre and poor speeds. But I tested with previous models, and it seems ok...

  KT those a few posts here a me trial there. These are not self powered readers... who I have long recommended people avoid the use (without a powered hub)...

  Re: External backup drive down regularly

  In fact, the wire is different from what I remember... Age don't you know.

  But I did the test on an AC TC. The result has been very reliable. He did not cause the TC to close... but I lost the connection of the USB almost every day... except for a trial where I kept the USB drive mounted in the Finder... so that the USB drive wouldn't turn it down. He then worked for a few weeks... until what the noise of rotation of disk (sitting next to me) drove me crazy... as soon as he was mounted is more, he would pass the same existence as before.

  The previous model TC was barely big enough for the internal use of the power supply units. So powered car running disc was impossible.

  Provide EI (GEN 1-5) at 1. 8A and 12v was adequate, but the standard USB port is estimated at 500 my wrong to manage disks free power.

  You would certainly think AC 12v 5A power supply models would have a lot of power. Yet, power problems are a major problem still. Supply is extremely sensitive and stop easily for reasons I'm still to understand.

  Where the long threads on power issues to the AE.

  Now, I'm going to speculate... I think that SOME problems are associated with power.

  What is the USB port side in airports of AC? Is it still 500ma? Apple never seem to give easy to find info on these details.

  Do you know? I haven't measured it, but I can try timing the time it takes to charge a phone.  Assuming that it will immediately trigger.

  Then he will have problems with a self-powered drive. Even if the drive has less energy than quotes, current during starting is much higher. The restriction of the power on the USB port is managed by a self regulator recovery... Once you triggered it, you must stop the power... then reboot the machine to restore power.

  Then, I also did the test with hub powered... and like your results... It was better. Longer time between the drive disappears from the network. But it was not enough to stop it.

  There is another interesting effect using self-powered hubs... I discovered this on a computer running Mac OS lets say! The computer would not start with a powered hub connected to the front USB. Hubs self-powered cheap, showing a defect in their design. They can refer to the USB port. In this computer, it was enough to stumble on the good power circuit and prevent the supply, commissioning... As long as the computer is running, everything was fine... but if I turned off it would not start. I finally woke up I had to exit the USB every time. At one point, I made a "special" Cup USB cable 5v line so the hub can stay connected. You can probably just to isolate the 5v of contact in the USB. Regardless of the configuration of power USB in the AE or TC is as you can assume she's sensitive enough... and at any time when the 5V on USB hub exceeds the 5V in AE it could trigger.

  The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  Endangered of AU base station is not uncommon.

  It responds to the pings? I guess he still has lights but is he blocked? You still get internet through it?

  Try to open it manually in to THE... use of the file / configure from others and put the IP address of EI.

  Talk with me by e-mail... It is open in the profile.

• iPad Pro is heavy and cause the hand pain, neck and shoulders. Everyone knows this?  If for advice?

  iPad Pro is heavy and cause the hand pain, neck and shoulders. Everyone knows this?  If for advice?

  Do not take while using it?

• Skype, causing the audio crash

  I narrowed down it to just for Skype. When I get a call, if it is call me and someone answer or I pick up a call, within 10 seconds, my Windows Audio Service crashes. I find the updated driver, Skype version updates, Windows updates. Everything. I started Skype, when a call is picked up, it causes the Audio Service from my Windows to stop working and then Skype crashes. I did nothing to my computer it would probably cause. If any additional info is needed, I would be happy to provide it.

  EDIT: Windows 7 Professional

  Try to uninstall the DroidCam application.