CC Initialising gone bad!

Similar Questions

• I had photoshop on my windows now the graphics card has gone bad and you want to move to my MAC I pay every month and I am a student, so, how can I transfer accounts until I get a new computer

  I had photoshop on my windows now the graphics card has gone bad and you want to move to my MAC I pay every month and I am a student, so, how can I transfer accounts until I get a new computer

  If you are on subscription, you just install it on your new computer and sign in with your ID Adobe that you used to buy PS when you arrive up to two installs, it will tell you that you have exceeded you install limit and asks if you want to disconnect other computers. Just so disconnect you. No need to have to disable or call Adobe!

• Satellite Pro U400 - BIOS update gone bad

  Hi all!

  I've updated the BIOS on my laptop and something was wrong, just not now a computer screen.

  I went to see the Web for Chris Bios recover.
  Have over 20 versions, but so far without success.

  My biggest problem is: I can't save on floppy disk 2 MB BIOS. All attempts to create a
  Flash or SD ended in failure.

  The laptop is: Satellite pro U400 PSU45E

  Please help me... the laptop reads the floppy in BIOS with little experience (the ones that come with Chris Bios 500Ko - 1000 KB) begins with a normal boot beep signals supposedly provided a definition blocks then baar times short beep and nothing to do...
  There must be something... BIOS BACK small size, emulator USB... BIOS to be torn down, so it is possible in charge from USB, SD...

  Every idea can be useful!

  Thank you very much

  Excuse my English

  f the subject isn't here, please redirect mderatora
  This is my 1 post here

  Hi mate

  Unfortunately if something was wrong during the update of the BIOS, then you won't be able to solve this problem without the help of a technician of the ASP

  I hope that the ROM BIOS module is not too bad
  In the worst case that the mobo is damage but maybe it s not damaged

  However. You must contact a local ASP and must ask for the manipulation of the Fryer!

  Good luck!

• Hard disk of laptop HP G7 gone bad, how to install Windows 8?

  HP Pavilion G7-2269wm

  Recovery disks were lost, not sure if it works even without the original hard drive.

  I heard that the product key is embedded in the BIOS.

  How can I go about installing of Windows 8 in a new hard drive?

  I've seen 8 posted here for download Windows OEM versions, is there any where I can get an OEM version for this particular model?

  UPDATE: OK, I ran a bad sector repair tool, I can now access the desktop if it's very slow and it seems that I can't do much, he won't let me do a search, I can't go to the recovery of the system to create recovery discs.  CAN I put the hard drive in an external enclosure, and I can access the drive from there.  I can also start up to advanced startup options.

  Is there anyway to create discs of recovery by the HD being mounted in an external enclosure, either the advanced boot menu?

  Your key works with this ISO standard. Google limits the number of times where it can be downloaded every day then you may need to make several attempts.

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

• Pls help, flashing gone bad :(

  Could someone help me, I tried to Flash my phone & something has gone wrong.

  Downloaded the firmware french & Flashtool

  To be precise, I have connected my laptop by usb by pressing vol-, the green light appeared & it showed that my phone is connected in flash mode. After that I pushed the button of Thunderbolt & checked flashmode & popup appears in which I chose french firmware I downloaded. I pressed ok. In the main window of flashtool it says loading of Flash files, I waited. After that two minutes, he said peripheral disconnected & says plug your device in flashmode. Then I unplugged my camera & re-connected by pressing vol - & his party. It showed an error while flashing.

  Now can't power on my phone or blinking he works Am screwed, can someone help me ASAP plsssssssssss

  The phone does not illuminate, the Green led appears & a slight vibration when I press the power button & disappears in 2 seconds, that's all...

  I don't even want ICS more, want my mobile works again

  Plsssss helpppppppppppp

  Follow the thread of nadia: http://talk.sonymobile.com/thread/35239

  the fundamental error, did you guys is: first, put the USB debuggging and connect your phone to the PC in on condtion. Flashtools will identify your model of phone etc. Then press lightning icon. Flashtools will ask you to turn off mobile and connect in flashmode (low volume key), flashing will be without fault.

• I have a computer laptop envy m7-k111dx and the hard drive has gone bad

  I have a computer laptop envy m7-k111dx and the hard drive went bad and want to order a HP recovery disc through the website to order it is to take me through circles

  Please use the support of HP recovery, you created earlier to return the computer to a factory State. If you create your HP recovery media when you first set up your computer, please contact the official support of HP in your region / country, via the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• "Compile error. Unknown error. "or"Multiplexing gone bad"

  Hello people,

  When I try to export my video to 4 minutes (just a simple video in 1080 p: some only clips with a soundtrack, a few titles and, despite a sometimes stabilizer no effect), a "compilation error. Unknown error "or a"multiplexing has failed-error"occurs. For me, it seems that the program chooses just one of two errors, so there will be no export my file... I can't find a reason for these errors.

  I don't know how to get rid of the error division multiplexing (only export the video or audio), but as soon as I get rid of this error, the compilation error occurs, and I don't know how to get rid of that one... I advised Adobe page on the compile error, but none of the advice they gave worked for me...

  I decided to restart the editing of the video. This time that I exported every time after I was 30-second edition. It worked twice (so that total I 1 minute exported), but the third time the error reappears. I removed the third 30 seconds I edited (so I had left only 1 minute again), and I've tried if the first 30 sec still wanted to export. But this time, guess what, errors have come to the top and it wouldn't export... PE will not export the exact same files as it has exported before more!

  I think, something is wrong in the program itself, but tproblem could my computer als. Sometimes while editing a "Premiere Elements has stopped working - popup" appears and then I have no choice but to close the program (what is a sign of a bad work computer?). And tproblem that it could even be forced by me, something wrong...

  
  

  Anyone know anything about these errors and how to heal?

  
  

  Looking forward to your reply!

  
  

  By the way: English is not my mother tongue, so don't go and hate on my English please!
  

  02010 m

  Your English is very good. But we need more details. We understand the problem you have described.

  1. what version of Premiere Elements and on what operating system works - it?

  2. What are the properties including the extension of what you put on your project timeline?

  What have you (manually) or project (automatically) defined as a project preset to match the properties of your media source on the Timeline?

  3. What is your intended export - version 13/13.1 if, Publish + share/computer/and then what? And what you define as the pre-selection for export? You use the default settings of the selected preset, or customize the selected have been preset on his tab multiplexer tab button and advanced video, Audio tab? What are your settings tab multiplexer?

  4. have you developed the timeline to help - + cursor above the timeline and looked for irregularities in all tracks (used or others that you feel is not used).

  a. gaps in the timeline summary

  b. debris (remains) scattered around the content of the tracks

  placement of c. of video and/or audio transitions, titles

  I guess there is no marker menu timeline or movie Menus involved in all this. I guess correctly?

  Before we get to the point where we suggest program uninstall / free ccleaner Cross (parts regular and register), reinstall it with antivirus and firewall disabled, let us

  a. make sure that the structure of the timeline has no flaws inside

  b. determine if delete the parameter of the item first (Adobe Premiere elements Prefs) editor has an impact on one of the problems you described

  If Windows 7, 8 or 8.1 64-bit

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  Version number

  and in the version number the Adobe Premiere elements Prefs file folder that you delete... If that does not work, delete the record of the number of full version in which Adobe Premiere elements Prefs file exists. Be sure to work with folder Option show hidden files, folders and drives on.

  Please review and consider, and then we can try to put all the information together to find a solution consistent with the problems.

  Thank you.

  RTA

• Satellite A210-16F - BIOS update gone bad

  Yes, the flash upgrade did not go with me as, like many I've seen. Weird that toshiba recommends a bios flash when you get the errors of installation win7 / vista, and have many fail.

  I tried 3 versions of different bios of the internet, 2 from the site of toshiba (2.0 and 2.1, I thought) and alaa200a.rom.

  When I do the disc of crisis with the crisdisk.bat (even do it in DOS) it copies all the files on the floppy disk, also tried different phflash versions. Older actually seem to load for 2 minutes, the most recent tend to charge for a few seconds then stops and starts loading again etc.

  Needless to say that all my efforts with these bios have not paid off for a bit.

  When I put the laptop normally and when I press the Fn key on the keyboard, the Fn actually lights up, but nothing else happens.

  Anyone who would have an idea what to do, apart from buying a new bios chip?

  Thanks in advance.

  PS, I have a Satellite A210-16F PSAELE

  Hello

  I think that you have to contact the ASP (SAV) to reflash the Bios. The Bios failure topics discussed almost every day and no one can give a good solution and more communicating with ASP.

  You can read an article that maybe can be useful for you:

  http://Web.Telia.com/~u43311424/crisis-recovery-disk/

• Satellite A210 - bios update gone bad

  Hi all

  I was updating of the Bios on my A210 when the laptop stopped yourself during the upgrade (possible overheating problem) and now it wont start at all as bios is lost.
  Any ideas how to get back there to wake up? There the reset on the M/B bios?

  Thank you

  Hello

  This can be corrected by a Toshiba service technician.
  It seems that add-on ROM BIOS was flashed incorrectly in this case that the Rom module must be flashed once more using the disc of crisis of the BIOS.
  As far as I know, you can download this disc. Only windows based BIOS is available for download so you need ASP support!

  Good luck

• Update of firmware for Camileo H10 gone bad

  Hello
  I got a Camileo H10 camera and wanted to do the firmware update, but something was wrong, I can't say what exactly.
  But now the camera doesn't even start. The only thing I see is the little red light at the front. But the monitor won't start... What is there that I can do, like reset, or something? Or is he now ready for the garbage? Would be a shame...

  Hello

  I m not a Camileo H10 owner but have you tried to remove the battery? Remove it and wait an hour. Now, reconnect the battery and try it. Maybe it works.

  If this isn't the case, I'd go for the authorized service provider nearest. Technicians can check the camera and fix it.

  Good luck!

• Late 2009 iMac Memory Card Slot Gone Bad?

  My memory card seems to have stopped working. Is there a way I can tell if it's the memory real slot hardware vs whether software or my SD card.

  I have reset PRAM and SMC. I had to reset the PRAM periodically to retrieve my startup chimes. I was wondering if they can be connected.

  I did first aid utility disk on the map and it seems to be OK, for what is disk utility is.

  It started with my card being ejected unexpectedly. If I reinsert the card, the card is not recognized.  This would solve usually solve the problem until the next time.

  Any help appreciated.

  First thing to do is clean

  a thin long brush, blower, vacuum.

• BEFSR81 Firmware Upgrade Gone Bad?

  Just putchased a new BEFSR81 router.  Using the installation CD, I got it Setup and works very well.  Then, I went to the support of Linksys and found page a more recent version of the firmware.  My version is 2.51.4.  I downloaded the 2.51.4.6 version and installed. I made sure to choose the version for my model 3.1. He appeared to install OK, because I got the message that it was for the page in 5 seconds.  Now I can't go to the web-based configuration page.  I can ping 192.168.1.1 and get a normal response, but by entering that address in my browser just times out.  I turned off the router and even held the reset for 30 seconds, but don't can't go in the web-based configuration page.

  This router is now watered?  Do I need to send it back?

  Thanks for any help on this.

  Found the answer in this thread:

  http://homecommunity.Cisco.com/T5/wired-routers/failed-firmware-upgrade-bricked-BEFSR41-v4-3/TD-p/25...

  Thanks Wizzard!

• Power cooling module: has it gone bad?

  I have an old PS4000 which is long out of warranty and I'm trying to decide or not to unassign or re - purpose, but lately, I've been making the mistakes related to the cooling module power once a week.  The error indicates, "Power cooling module 0 is off or not getting any power.  When I log in and check the status of the appliance, all this indicates OK.  I can not any assistance from the Dell Technical Support because it is out of warranty, so I'll try to understand if there are troubleshooting steps I can take to determine whether or not the power module should be replaced in order to get the price and see if it is useful to replace the module or the whole scrap.  Thanks in advance.

  Hello

  PCM is part of the diet, so the entire power supply should be replaced.   Most likely, you will need to find a unit that is used/given to nine.  I don't think that you can always by these Dell and more.

  What firmware is running this table?   Firmware might be very old.

  Kind regards

  Don

• Copy / paste the desktop gone bad

  Hello.

  When I paste a document or a folder on my desktop, even if I click on the far left of the screen (where I want) and
  then "Paste.."(right click). "» the document appears at the far right of the screen... especially hidden under one of the existing files and not necessarily the same
  folder!

  Any ideas?

  If this is the wrong category/selection move it please...

  Thank you

  I have now rechecked the "icon align it on the grid", I can find the document at least when moved to the office.

  Thanks for your help

  I misunderstood your last post and thought it was to your satisfaction.

  Start > type CMD

  Right click on CMD and select run as administrator

  Type sfc/scannow

  Press enter

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Have you tried to do a right click on the document > Send to desktop (shortcut)?

  You can then drag the shortcut anywhere on the screen

• HARD drive gone bad. How to replace the HARD drive and reinstall operating system without a recovery disk?

  I have a HP with Windows 7 Home Premium TouchSmart tm2.  The HARD drive is clicking and will not start.  Error: Device not found Boot.  I guess I have to replace the HARD drive, but how can I restore/reinstall operating system without a recovery disk?  Windows was preinstalled, and I have the product key.  Thank you.

  Hello:

  You can order a recovery disc defined by following the instructions on the link below.

  http://support.HP.com/us-en/document/c00810334

  or...

  You can download the 32-bit or 64-bit version of windows 7 Home Premium ISO on the link below and use your product key to activate the installation.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  You need a program that will be able to burn ISO files so that the DVD is bootable DVD burning. Burn at the slowest possible speed for best results.

  Then install all the drivers you need for your PC support and driver page.

  Paul