CD DVD device

Similar Questions

• HP Zbook Studio G3: error cd/dvd device driver missing

  Hello guys,.

  When I try to install windows 7 Enterprise 64-bit on Zbook Studio G3, I get the lack cd/dvd device driver. I tried all the possible drivers, but no luck

  Any help would be appreciated

  Thank you

  concerning

  Generally, it is an indication that the you use the Windows 7 installation media that is inserted in a USB3.0 port. Windows 7 is not supported with native support for USB3.0 and requires the installed USB 2.0 port or a USB3.0 port emulation USB 2.0. In addition, there may be issues when you try to install Windows 7 on an Intel SkyLake chipset.

  The first step would be to go through the BIOS and see if there is an option for the compatible mode or emulation for USB ports.

  Alternatively, you can contact HP to see if they have material recovery/restore for Windows 7 to your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Device Manager show that this driver may be corrupted or missing (error code: 39) on CD/DVD devices

  Device Manager has a yellow ball with an asterisk on the CD & DVD devices.  My computer does not display a device.  The Device Manager has a message that the driver may be corrupted or missing (Code 39).  It happened after uninstalling Norton and McAfee installation.  I uninstalled McAfee and tried to install the drivers.  I uninstalled and reinstalled the device.  Still no CD or DVD displayed in my count.  Everybody recognizes the problem?

  Original title: CD & DVD devices do not work

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

  When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

  You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

  (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

  I hope this helps!

  Mark <> Microsoft Partner

• Error ""A required CD/DVD device driver is missing. " If you have a flash drive driver floppy disk, CD, DVD, or USB, please insert it now.

  OriginalTitle:lack drivers

  I change my ubuntu to Windows 7, but "A required CD/DVD device driver is missing. If you have a driver on floppy disk, CD, DVD, or USB flash drive, please insert it now. Note. If the windows installation media is in the drive, you can remove it for this step. "what I can do about it?

  Hello

  Are you able to boot to the Windows Vista operating system?

  Read the following article and see if that helps:

  Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disk:

  http://support.Microsoft.com/kb/952951

• Impossible to re - install Windows Vista. "A required CD/DVD device driver is missing." appears

  I have the same problem as a previous applicant.  My hard drive went down and I had to replace it with a new one.  Windows Vista is the operating system installed on my HP Pavilion and I try to use reinstall drive.

  The message says "A required CD/DVD device driver is missing.  If you have a driver disk, CD, DVD, or USB flash drive, please insert it now. »

  I don't have a floppy drive on this machine, so I'll have to do the installation from a USB key.

  I tried so that it points to the Installation DVD, but it was still impossible to find the required driver.

  Thank you

  Sean

  Hey Thornwill

  HP machines have some problems with the replacement of their equipment with new hard disks not hp etc. and reinstall vista

  My advice to you would be that you contact hp

  Walter, the time zone traveller

• Students cannot "connect/disconnect the virtual machine's CD/DVD devices.

  I will start with this context (and apologies for the wall o ' text): I'm a newbie.  I took the course VMware local community college offers [VMware ESXI Server Enterprise (CIS197)], but I've not yet certified. And I don't have a real experience, except what I have taught myself so far.

  I recently accepted a position of learning associated with the College (think: glorified lab tech). I was tasked to work with stuff from VMware in the laboratory (among other things such as Cisco and Juniper equipment). There is no pass-down information like the previous left the position four months ago.

  We have a single host running ESXi 348481 4.1.0. "We have vCenter Server (5.5.0, 1312298), running on Windows Server (2008 R2, Enterprise Edition).  Access host and vCenter through two different IP, addresses using the vSphere client (either 5.5 or 4.1, using a single application - depends to know if I connect to the host or vCenter).

  At that time, the host is using local storage only (we have plans to change this, but it will take time).  The host is not a production on its own server, because it does not have a school systems.  He does, however, run a number of virtual machines in the lab, students use (Linux, Microsoft, Web design, etc.).  So, right now, I can't take it down.

  I was tasked to create a number of virtual machines that students can use to make the basic labs of Microsoft Windows 7.  So far, I have:
  -Created users, one per student, on the host.
  -Creating VMs, deploy one per student, I have a gold model vcenter.
  -Creation of roles to limit the access of students to just their VM attributed, which they access via client vSphere.
  -Created a Windows Server 2008 R2 domain controller that is also a DHCP server.
  -Created a virtual network, which is accessible only by the Windows 7 virtual machines and is not visible outside the vSphere environment (if I said this right - he does not see the Internet or school network).

  So far, it's all good.

  However, I need to be able to allow students the ability to edit the ISO file on which their VM points in order to complete some laboratories. I guess they would use the button "connect/disconnect the virtual machine's CD/DVD devices" on the taskbar (or console window). It does not work.
  I searched a lot and found that others have had the same problem.  However, all of the solutions I've tried so far have failed.  When they click 'Connect to ISO image on the data... store. "they get an error message means nothing to me,"an internal error has occurred in the vSphere Client. Details: Object Reference not set to an instance of an object. Contact VMware support if necessary.
  The role that I use for students has these settings:
  -Data store > Browse the data store
  -Virtual Machine > Configuration > change the settings of the device
  -Virtual Machine > Configuration > settings
  -A bouquet under the virtual machine > Configuration >
  -Configure CD media
  -Console interaction
  -Connection of the device
  -On
  -Power off
  -(and more, which I don't believe are important to the question)
  -State > create the snapshot
  -State > go back to the snapshot

  I tried "Virtual Machine > Configuration > add existing disk", "Virtual Machine > Configuration > add new disk" and "Virtual Machine > Configuration > add or remove an instrument" with no luck.

  Either by the way, the root account can do all these things, but no other account can - not even a game as an administrator account.

  I've seen mention I have apply the role in the data store.  It is perhaps part of the problem. I can't see the data store when I am connected to the host (wellll, I can, if I click on the host name, then on the Summary tab - but roles do not apply at this stage).  I see is 'Inventory' (which has virtual machines and Pools of resources), 'Rôles' and 'log files '.

  I can see the data store when logged in vCenter. Roles of students, however, are defined on the host computer. If I clone the role of users in vCenter and change this role cloned to have "permissions" that those who are on the host computer and then apply it to the data store, it still does not work.

  So, after all this (which I hope I've included all the necessary information), what can I do to allow the students to change ISO to which they are connected?

  Of course, if I left something, or if someone has a question, please ask.  I want to get this resolved as soon as I can.

  It turns out that I finally found the solution to the problem.

  What 'fixed', it is sufficient to vSphere Web Client to vCenter, which then allowed us to use Single Sign-On (SSO).  This, in turn, allowed us to define users and roles in vCenter (rather than having set them up directly on the host computer) which have then been applied to the VMS of students and also to the data store.

  Now, they can (de-) connect their ISOs at will.

  I find it interesting that vSphere Client (application) shows the users (and the things that they have access to), but it won't let you set of users.

• a Q dumbo? ~ is elements Photoshop (a) a unique, one device download dvd? (b) a load of multi dvd device? (c) an account that I can access it from any device. , and finally, it is an account of the life, a single payment? Sorry, if it comes to TR

  a Q dumbo? ~ is elements Photoshop (a) a unique, one device download dvd? (b) a load of multi dvd device? (c) an account that I can access it from any device. , and finally, it is an account of the life, a single payment? Sorry, if it's simplistic, but nowhere in the contract the descriptions are these addressed facts?

  PES is a one-time purchase. You can buy a DVD at retail in an electronics store or as a download from Adobe. You have 2 activations for non-simultaneous use and the license is croos-platform for Windows and OSX if you wish.

  Mylenium

• Portege A600 - Windows 7 installation CD/DVD device driver

  Hello.

  I am trying to install Windows 7 Professional 64 bit on my Portege A600.

  I tried to boot from the DVD, flash. I changed all of the possible settings in the BIOS, I have updated the BIOS to version 3.0, but I still have this bloody error "a required CD/DVD drive device driver is missing". Is there a place where I can download this driver to show the installer without having to download a 100 TB of pron?

  Or is there a way to fix my problem?

  Hello

  First of all there is no special driver CD/DVD. It of a part of Windows 7 and so there are no drivers available.

  It would be interesting to know when you get this error exactly.

  Maybe your defective CD/DVD drive. You can test another?

• M300 DVD device i/o error

  Hello
  You just bought a M300. Having problems playing DVDs. There is no problem reading CD
  Get an i/o device error. This could be a hardware or software problem?
  Best regards / jesper

  Hello

  If the device has the factory settings it should not happen. Please contact your local dealer and clarify this point. The unit is new, and if you manage quickly you can ask for a replacement.

  Good bye

• Re: Code 10 DVD device is not found

  Can someone tell me how to fix the error code #10. There, the laptop will let me play any CD or DVD, what I can do! in the ASP tell me they can do nothing to help me to do!

  Hello

  First go to the Device Manager and remove the drive from the list of devices CD/DVD.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After removing this registry values reboot the laptop.

  In my case, this procedure worked fine

• Re: Satellite P200: impossible to the release of the video on an external HD-DVD device

  I recently bought a Satellite P200 with a HD DVD player but when I try to play a disc I get the message

  "Impossible for the release of the video on an external device. Please put your screen by pressing the Fn + F5 keys after the end of the application. »

  This happens when I try to run the disc on the laptop with no other attached display device. I am doing something stupid or is there a problem with that?

  Hello

  I think I have a solution.
  It seems that the Realtek audio driver causes this problem.

  According to this Toshiba document a new soud driver installation will help you solve this problem of HD - DVD.

  Check it;
  + HD DVD title does not play ("unable to output the video to an external device") +.
  http://askiris.Toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1664 788xml & sliceId = & dialogid = 24590306 & stateId = 1% 200% 24588233 20

  I'd appreciate feedback

  Good bye

• dc7800 sff windows 7 32-bit clean install - a required CD/DVD device driver is missing.

  Hard to install Windows 7 32 bit on my desktop DC7800 SFF pc

  white screen - fixed (updated bios using back win98 & USB flash drive prep utility)

  installation white screen set (stopped using the dvd usb player & utilisΘ local DVD drive)

  Image DVD transferred to USB flash drive (always get this request)

  Downloaded and tried many drivers of different sites...

  Drivers, Software & Firmware for HP Compaq dc7800 Small Form Factor PC

  Intel® Rapid Storage Technology (Intel® RST) RAID driver

  Intel ICH9 Chipset Driver for Microsoft Windows 7 - sp46869.exe

  It seems that nothing I try does not work.

  (always get this request for drivers)

  It has been a very long and tedious struggle day. I'm very tired and don't know where to look next to find answers...

  Any help this dispute would be really appreciated thanks.

  Well everything is solved and works well.

  Typing this from the newly built Office.

  Any Solution used (thanks to Paul Tikkanen to put me on the right track)

  (01)

  Update BIOS to fix a blank (black) screen during windows 7 Pro (32 bit) install on a hard drive (new & empty).

  Dc7800 SFF - Windows 7 drivers

  Update of firmware for HP 786F BIOS of computers with Intel processors families
  sp51245.exe

  I couldn't get this utility bootable CD version to work so had to turn to a USB bootable flash instead.

  Prepared the botable USB using - key USB W98 back Starter Kit

  (02)

  Downloaded the ISO from Microsoft file

  Windows 7 Professional with SP1 (32-bit)

  SW_DVD5_Win_Pro_7w_SP1_32BIT_English_-2_MLF_X17-59276. ISO
  Real Corsair Flash drive size - 2 377 506 KB - in windows Explorer
  Size: 2.26 GB - 2,434,566,144 bytes
  Size on disk: 2.26 GB - 2,434,596,864 bytes

  The file ISO of Windows 7 original instalation was certainly smaller that it should have been!

  (03)

  Burn the ISO on a 4.0 GB Corsair Flash drive using USB W7 Starter Kit

  New image details - Corsair 4 GB Flash Drive
  Size: 2.28 GB - 2,452,486,680 bytes
  Size on disk: 2.28 GB - 2,454,302,720 bytes
  873 files
  200 files

  (04)

  The installation went very well with only 2 issues of device driver initially...

  PCI Simple Communication controller
  Driver - Chipset
         Customer Manager Active Intel HECI Device Driver
  sp46137.exe
  PCI serial port
  Software - system management
          Intel AMT AMT 3.0 LMS_SOL
  sp46134.exe

  (05)

  I run one - SAPPHIRE HD 5450 1 GB DDR3 PCIE HDMI - Twin (DVI & VGA) graphics card

  First configuration - downloaded the drivers from the manufacturers Web site.

  On the installation of what I thought was the at and the latest driver, 2 problems...

  1 - the installation says that I needed .net Dot 4

  Downloaded and installed - Microsoft .NET Framework 4 (stand-alone Setup program)

  2 - the second test video driver installation is finished - but - screens flickered and flashed like crazy.

  I did correct anything that.

  Wiped the hard drive and run through the steps above.

  This time, making sure to use the original cd that came with the card of 2011. Result!

  PS - In the first leg through after installing windows successfully, I did all the updates of Windows 7.

  It took hours to download and install.

  Second time, I did not bother with the Windows updates immediately.

  Next step-

  3 future issues to be covered in the following threads

  (a) preparation of the utility of the technology Intel Management Acive - entirely private or disabled.

  (Do not need or want but hate having outstanding pilot flags in Device Manager).

  (b) the image of the hard drive and train you to restore boot partitions for multiboot Windows 7 installation.

  (c) work on a quick way to landslide-live stream the latest windows updates in the installation.

  Thanks for the help and I hope that some info above is useful.

  Advice on the high road (preferably free) partition SW of imagery to manage encrypted data of the partitions would be a good thing.

  Next thread?

• Lite-On iHAS124-04 IT burner - DVD "device cannot start Code 10".

  Windows does not work with my DVD writer.  This is the third I've tried and I get the same error message in Device Manager.  "Device cannot start Code 10".  It shows the correct driver and BIOS recognized correctly as a SATA drive.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• No audio, cd/dvd devices does not work, can not update via Microsoft Update, usb memory sticks not recognized and much more

  The initial problem was no audio sound on CD.  The computer had other system sounds.  I uninstalled the Realtek drivers and downloaded from the website computer and reinstalled.  Still the same problem. I tried to adjust the volume control and clicked the speaker at the bottom on the right bar.  I got a message saying there is no mixer device and the small speaker disappeared and reappeared even after several reboots.  There is also an error "no audio device".

  After reboot, the computer gives this error message: "Generic Host process for Win32 Services has encountered a problem and needs to close." We are sorry for the inconvenience. »

  While trying to find a solution on the web, I discovered that the computer does not recognize the usb key,
  It won't restore to an earlier time,
  the CD/DVD drive will not run the data disks

  and Windows Update will not update.  The error message said: "the site has encountered a problem and cannot display the page you are trying to show."  There is an error number: 0x800706BE I tried to find this error message on the MS knowledge base, but it is not listed.

  The last Windows Update was on April 16, 2009 so I tried to restore to April 15, but it says 'system restore is not able to protect your computer.  Restart your computer and restart System Restore. "    After the reboot, the same thing happens.

  Any help is appreciated.

  The data is not "hostage." Pull the disk and put it in a box disc or it slave to a working computer and retrieve the data. If you don't have an additional computer you will need to borrow a friend or with the machine at a tech. You can also try the o with a Linux Live CD boot. I like Knoppix, but there are others. This has two advantages: 1) if the system works, you can back up all the data that missed your last backup; and (2) with the machine running Linux allows to determine whether the problems are caused by software or hardware. If the machine is unbearably slow and/or Linux cannot run correctly, you know that the hardware is at fault. If the machine behaves perfectly under Linux, you know that the software (Windows) is at fault.

  Whatever you do, do not install Windows without test material. If the hardware is at fault, software solutions like reinstalling Windows will be unnecessary. MS - MVP - Elephant Boy computers - don't panic!