CD/DVD Rom Drivers

I need drivers for CD/DVD Rom

Hello

CD and DVD player, most, not all, use the default Windows drivers. Try the methods here and
If necessary check with the manufacturer of system support and Forums (if any) as well as the real
manufacturer of disc/device support.

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • Hello, I accidentally unistall my drivers cd/dvd rom. Peut help click my cd/dvd rom drivers.

    Hello, I accidentally unistall my drivers cd/dvd rom. Peut help click my cd/dvd rom drivers.

    You should not have to open your computer.

    Click Start, type: Device Manager

    Press enter on your keyboard

    Click Find hardware changes on the toolbar

    Your optical drives should be redétectés. Restart your computer and see if it shows up.

    If this does not work, try the following suggestions by Rob Brown MS - MVP

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  • CD and DVD-Rom drivers have suddenly stopped working

    Device drivers CD/DVD-Rom does not recognize the CD and have suddenly stopped working.

    you have changed the cd rom or dvd rom and does not recognize the CD... go to my computer and you see that there is no cd/DVD-rom installed - there is the http://support.microsoft.com/mats/cd_dvd_drive_problems/ solution

  • Im trying your doing a clean install of windows 7 and it says cd/dvd rom drivers are missing

    Installation does not go as expected, ive installed 100's of times and now im getting cddvd rom drivers are missing and help guys

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Fix for CD/DVD drive missing:

    http://support.Microsoft.com/kb/982116

    Go into the BIOS to start the computer and change the setting from IDE to AHCI. This allows Windows 7 to recognize the SATA CD or DVD ROM drive you dΘmarrez since and it should install.

    This probably won't work if your CD/DVD-ROM is not a SATA drive.

  • Where can I download my CD/DVD-ROM drivers for my dell inspiron 5520 running Windows7?

    I have recently reinstalled Windows on my laptop. I installed (maybe all) drivers. I don't know the icons of CD/DVD in my computer.

    Can I have the link to download it please?

    Thanks in advance,

    Nikhil

    No driver is required - Windows have the driver.  Does the BIOS (F2 at startup) to see the drive?

  • Satellite 5105 CD/DVD Rom Drivers

    I recently lost the drivers for my scsi cdrom device and I can no longer burn or read cds on my cd internal or external drives. How can I fix this problem? Download the drivers? I can't reformat my HD because my laptop cannot read the boot CD and downloads of Microsoft have been of no use. Help, please!
    Solace

    Hi console them

    On this path, it is not easy to give a proper diagnosis, but according to your assignment, I assume that there is a hardware problem. The drive is listed in Device Manager?

  • HD DVD - ROM driver is missing or corrupt on Satellite A200-s 23

    Hi, recently I bought my Toshiba Satellite A200-23 s and now it says that the HD DVD-ROM driver is missing or currupted. The system can not see DVD - ROM. My laptop is still under warranty, but perhaps I can fix it somehow? I found the list of drivers on this site but you've not seen DVD - ROM drivers.
    Thank you

    Don t think that it s a hardware problem.
    I think that it s a registry problem.

    Access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Reboot the laptop.

  • I have a problem with the CD/DVD-rom does not.

    Original title: CD-ROM/DVD-ROM and drivers

    Hello

    My DVD Samsung writer stopped working.  The model (SH-222) is a plug-and-play using CD-ROM/DVD-ROM drivers of the window.
    -cdrom.sys version 6.1.7600.16385 (win7 - rtm.090713 - 1255) in the folder: Windows\system32\DRIVERS\ and.
    -GEARAspiWDM.sys version 2.02.03.00 in the folder: Windows\system32\drivers\.

    I get the following error in the configuration of properties of CD-Rom drive: "Windows cannot start this hardware device because its configuration (in the registry) information is incomplete or damage (Code 19).»  I tried the windows troubleshooting hardware request without success.  I even swapped the the DVD burner with a new model of Samsung (SH-224) with the same results.

    I cleaned my registry using the "download free CCleaner.  I have a knowledge base of the obligation to register, but not enough to run an editor from the registry on the registry file itself.

    What are my options?

    Mario

    I cleaned my registry using the "download free CCleaner.  I have a knowledge base of the obligation to register, but not enough to run an editor from the registry on the registry file itself.

    http://support.Microsoft.com/kb/982116/en-us

    Your registry may be damaged. (Code 19)

    This problem occurred after cleaned your registry using "CCleaner database"? If so, then when running CCLeaner you would have the option to backup the registry keys. If you did, perhaps restore the backup keys. If not, read the article above (do not rely on the fixit).

  • E531 dvd - rom (W7) power off

    Hello

    I have a problem with my Im dvd - rom. every time on battery, dvd - rom automatically turns itself off and I'm not able to restart, by clicking on "power on" has no effect, and there is no setting in the power manager that is linked to this. I tried to reinstall the microsoft dvd - rom drivers, I tried to PM and PM driver update, but it did not help. When I remove from Device Manager and reboot the system, then it's ok, but this solution lasts until the next boot. Any ideas?

    W7U running 64-bit

    Hello

    Probably, you might want to install an earlier version of the power manager and check. Community mod that agotthelf had confirmed in this thread version Power manager 3.59 works fine with power automatic optical drive option available.

    Best regards

    Mithun.

  • Drivers for the DVD - ROM SD-R1312

    Hello
    First of all: I am a new user, just create an account; Greetings from Switzerland.

    I'm looking for the latest drivers for my cd drive: DVD - ROM SD-R1312 and couldn't find on toshiba sites.

    Does anyone know the correct link for downloads. Windows XP/SP2

    Thanks for help

    Birke

    Hello Birke and welcome to the forum. ;)

    In general there is no driver to be installed for the optical disc drive.
    It will be much easier to help you if you explain what problem you have with optical disc drive.

  • Satellite Pro 2100: DVD - ROM not detected - need drivers

    Hello
    My DVD ROM disappeared also from 'my computer' and in the Device Manager.
    Where can I get a driver for the standard DVD ROM?
    Computer does not see the disk, how ' do it see the player "so that I can install the driver?

    All the words of wisdom?

    Hey riri,.

    Check in Device Manager to see if your DVD-ROM is listed and if so was it an exclamation mark against it? If it is, then simply remove it from your system and restart. Windows will identify as a new device and install with the correct driver.

    It is also possible that the drive may have 'disappeared' If you have recently removed any software DVD. It is a known issue and a solution is described in the following Microsoft Knowledge Base article: -.

    http://support.Microsoft.com/kb/320553/en-us

    Kind regards

  • Base system device drivers? CD-ROM/DVD-rom disappears - was not found.

    Why is it so hard to find a solution for this?

    Don't know what happened. The next thing I know - I don't have a CD/DVD-rom - that works - it disappears from the list of device - and "Base system device" Manager in his place with an exclamation point with it... with 3-4 other items in the list no longer works. ??? Currently, there are 2 basic system devices in device with the exclamation points Manager and no idea pilot to remedy?

    (1) feature of system - hardware ID value base:

    PCI\VEN_0180 & DEV_0843 & SUBSYS_30EA003C & REV_12

    PCI\VEN_0180 & DEV_0843 & SUBSYS_30EA003C

    PCI\VEN_0180 & DEV_0843 & CC_088000

    PCI\VEN_0180 & DEV_0843 & CC_0880

    (2) system base of the unit-

    PCI\VEN_0180 & DEV_0852 & SUBSYS_30EA003C & REV_12

    PCI\VEN_0180 & DEV_0852 & SUBSYS_30EA003C

    PCI\VEN_0180 & DEV_0852 & CC_088000

    PCI\VEN_0180 & DEV_0852 & CC_0880

    (3) Standard SD compatible SDA host controller

    PCI\VEN_0180 & DEV_0822 & SUBSYS_30EA003C & REV_12

    PCI\VEN_0180 & DEV_0822 & CC_0805OO

    PCI\VEN_0180 & DEV_0822 & CC_0805

    The other 2 are network cards.

    Can someone help me with this? I would be so grateful! Thank you.

    Hello:

    The only driver I know who installed the base system devices is this one.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-58981-1&cc=us&DLC=en&LC=en&OS=2093&product=3636382&sw_lang=

    Looks like the motherboard is endangered.  Very common with this model.

  • Matshita DVD-ROM UJ-850 s ATA does not have all the drivers are up-to-date

    Title of the Moose: Matshita DVD-ROM UJ-850 s ATA

    I can run no longer THAN CD/ROM s on my Toshiba laptop because I don't have the driver for it and I have no idea how he return to WG.

    Hello

    ·         What exactly happens when you try to play a CD/DVD?

    ·         You receive an error message during playback of the CD/DVD?

    I suggest you run the fix it provided in the link below to fix the problem.

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/

    You can also follow the manual for troubleshooting steps described in the link below and check if they help to resolve the issue.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

  • Satellite A205-S6808 corrupt driver CD-ROM/DVD-ROM - Code 39

    My driver is corrupted for my CD-ROM/DVD-ROM drive.

    There is absolutely no support for my model on the Toshiba homepage.
    I tried to download the drivers for the L L505 series since my tech friend said that he must have worked. He did not.

    The parade of device upward, but I get a message from missing or corrupt windows driver.
    I am running win 7 32 bit and the DVD drive is the same one that came installed when I bought the laptop.

    This is the message I get "Windows cannot load the driver for this hardware device.
    The driver may be corrupted or missing. (Code 39) »

    CAN ANYONE HELP?

    Hello

    I m a bit confused how you managed to download the CD/DVD driver for the STRANGE internal (optical disc).
    The point is that all Windows operating systems contain own driver Microsoft ODD that controls the CD/DVD drive.
    That is why it s not necessary to load/install the drivers for the CD/DVD drive.

    I think it s a registry problem.
    You should first go to Device Manager and should remove the CD/DVD of the system drive.

    Next step is cleaning the registry.
    Start regedit and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    After this restart of the unit
    Should work

    Welcome & good luck

    PS; It is a model of cell phone US and all the drivers are located on the Toshiba U.S. page.

  • Error code 39 with reader of DVD - Rom Toshiba SD - C2502

    I have a Toshiba DVD - Rom SD-C2502 by car. Im getting a code 39 error saying "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing.

    I have no idea what to do about solving this problem. The cd my computer drive icon disappeared.

    I think I need drivers. Ive looked around but can't find the drivers.

    I'd appreciate any help that.

    Thank you

    What to say. There is a problem with the registry entry!

    Search this forum for son already described similar problems?
    I think that you didn t.

    I would like to present you a small list of threads that contains the nice description and brings you the solution:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=106314𙽊
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=107214𚋎

    I think this should be enough ;)

    Good bye

Maybe you are looking for

  • Audiobook download not

    Hello I'm traveling abroad, and yesterday I bought the second book in a series of audio book. Download stayed greyed all yesterday, but my wifi access was questionable, so I don't think anything of it. Today, I have access, but in iBooks download rem

  • Satellite U400-10 has: Downgrade from Windows XP Home edition

    I got my laptop U400-10 for XP. Few things left pending: 1. How can I get the LED on the top of the screen (and Satellite/power LED) to decrease intensity again by pressing the LED light on the top of the screen? Worked under vista. Cannot run Window

  • OR VIsion: Edge Detection, Auto Setup

    Hey,. I work with the NI VIsion Module and try to use the IMAQ find Edge.vi. If you are you using the Vision Assistant, you must enter the 'meaning', "Edge of polarity" and so on. And the more you are able to mark "Automatic Configuration", so that t

  • Picitures in Movie Maker are blurred

    I downloaded 100 photos to movie maker - was beautiful - then I downloaded more than 20 photos and they are blurry.  Can't understand why?  I tried their reloading and remove in fact the entire film and they still came back blurry.  Image (thumbnail)

  • How to change the SATA mode to AHCI, no setting on the BIOS (Aspire E5 - 471P)

    How to change SATA to AHCI mode. Any setting in the BIOS (Aspire E5-471P-35Y2)