CD - RW, drive not recognize

Similar Questions

• OfficeJet 4500 G510g: Windows 10 Driver not recognize OJ4500 via USB. does not scan

  After the upgrade to Windows 10 JO 4500 would print not scan. (From August 2015) completely uninstalled and reinstalled the latest driver. The Setup program does not recognize that the printer has been connected via USB (the button "Next" is never active). I was able to print but never able to scan.

  Launch the center of solutions results in:

  HP solutions Center can not run because your device installation is not complete.

  Today, on 20 October, I downloaded another driver updated (September 2015, 140_408.5), uninstalled all the previous HP printer software/driver and tried again. The pilot 'up-to-date' has exactly the same problem - not recognizing that I have now connected to the printer via the USB port (trying various ports on the PC) and never goes to the "following".

  I clicked the help button.

  1 said to confirm that the device is connected and powered. Click back to try again. No luck.

  2 says that "some hidden configuration commands not will be over." Click back, wait a few minutes for the installation of the unit is complete. No luck.

  3. Affirms that if the problem persists, check the troubleshooting section in the Readme on the CD-ROM. I have no CD so no luck.

  Then, I couldn't leave the Setup program except by using the Task Manager to kill the process running.

  I'm now able to print, despite the above experience.

  Since the center of Solution will not work, I tried Scan color of the façade. View of the front panel "no scan options".

  Does anyone have a solution for this?

  SOLVED.

  Downloaded HP Print and Scan doctor. Despite the fact that I had just downloaded the latest driver, the good doctor displayed:

  A later version of the software is available for this product.

  After downloading and installing, he recognized my USB printer connected and completed the installation.

  Now, I can scan.

  Panel, programs and features shows the version 14.0 rel. 6

  HP: Why East-exit 6 not on the download page, rather than to release 5 that I downloaded today?

• Windows Vista Driver Seagate Ext. Hard drive not recognize

  Hello: I have a "push button" five years external seagate hard drive. Vista support applications for this unit - implementation and applications - but when I go to back up my hard drive to laptop (windows vista OS) may not perform the function because of driver problem. I contacted seagate and they said that their hard drives is not software, and there is a problem with the recognition of windows vista driver. the seagate works fine with xp. need help. is there a patch for this problem download?  Thanks, ej.

  milkprod,
  Can you tell me what the model number is the external hard drive Seagate that you try to make it work?

  Here is a link to the Seagate external drive Troubleshooter - problems of detection of the Windows Vista operating system - http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=ext-ts-vista&vgnextoid=694d8b0e50e73110VgnVCM100000f5ee0a0aRCRD.

  You can also try to remove software and / or drivers currently installed, remove the disc, then plug the drive back in and let Vista install default drivers.

  If none of these things work let us know what is the model number of the drive and what version of Vista are you using and we will be able to immediately help you.

  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my mac does not recognize my hard drive or SD cards?

  I got a new Macbook Air last month. Since I had so much problems with it - mostly because if you plug in anything whatever in the SD card slot or USB drives, it does not recognize them. I own a mac before, as well as PC laptop dell, so I am aware of the problems when formatting the discs everywhere, but even when I plugged a new passport hard drive, the computer couldn't find. Similarly, you may not find all the SD cards when I tried to use the SD card.

  What is going with this? I am a photographer living, so I need constant access to these two. This new model has some new method for transfer of files from the external hard drive etc.?

  Close, then connect the mac to a power adapter, disconnect all external devices.

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  reset all external then pulls even deleted

  Once you open a session reconnect the external hard drive

  If the drive is connected with a hub of party 3rd do not use it and connect the drive directly to the mac

  Connect the external hard drive and open Macintosh HD/Applications/Utilities/Disk Utility disk utility

  The drive appears in the list of external devices?

  

• my macbook pro dose does not recognize my g drive

  my macbook pro is not recognize my g drive, I have reset the pram and am stuck pleas help

  Open the Finder.

  In the Finder menu bar, click Finder > Preferences, and then select the general tab and then make sure: external drives is selected.

• iMac does not recognize the hard drive device

  iMac does not recognize my new WD My Passport for Mac external hard drive.

  I have a late 2009 21. 5-inch iMac with Mac OS X Lion 10.7.5 version and I have USB 2.0 ports.  Memory is 4 GB 1067 MHz DDR3.

  I made sure that my Finder preference displays drives and external drives.  I tried to see if would recognize a DVD and it does.

  I was hoping to save my data to be transferred to a new Mac.

  Any help will be appreciated

  Hello amfisher,

  Thank you for using communities Support from Apple!

  If I understand correctly, you are unable to see your new external drive to an iMac 2009.  I'll be happy to try to help with this.

  So that your iMac to see it, it may be necessary to reformat the drive. The best format for use with your Mac's OS X Extended (journaled).

  Format an external hard drive for use with a Mac

  1. Connect the hard drive to a USB port on your Mac.
  2. Open disk utility.
  3. On the left side of the disk utility window, select your external drive (or one of its partitions).
  4. Click the delete or delete button on the toolbar.
  5. On the Format menu, choose Mac OS extended (journaled).
  6. Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.

  This should allow you to copy files to the disc.

  Your computer has software called Time Machine.  It is a fantastic software for backing up your computer.  Information on how to use Time Machine is available here:

  Use Time Machine to back up or restore your Mac.

  Using Time Machine is usually the best way to move all your files from one Mac to another Mac.

  Have a great day!

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?

• not recognize the drive flash 10.11.5

  ALL OF A SUDDEN DOES NOT RECOGNIZE MY FLASH DRIVES.

  ANY SUGGESTIONS?

  Hot there in Borego Springs?

  Launch/Utilities/Terminal and copy and paste this command at the command prompt:

  diskutil list

  Press return.

  If it sees the drive, note the number of the disk (left column) that you want to mount.

  Then enter this command:

  Mount /dev/ (number of disk)

  Put the number without parentheses.

  Press return.

  To disassemble the use umount.

• External CD drive does not recognize the CD burned on El Capitan.

  Using El Capitan 10.11.5 and an external hard drive, I have burned successfully mp3 files iTunes CD - I can play on the computer itself - but an external CD drive does not recognize, even if the Player recognizes the discs once engraved on Snow Leopard and previous models.  What's wrong? I burn "at the fastest possible speed," as I have always done.

  What CD format?  If you burn it to a CD mp3 this is not very common for a standard CD player to be able to read those.  You may have burnt the other CD audio CD format.

• Firefox is not recognize my drive flash version 15.0

  Hello. Today I got in trouble with Firefox is slow and crash/freeze whenever I played a Facebook game. He told me to download the flash update I did about 6 times today. He still does not recognize that I have. I looked in my control panel in Flash and I can't see what follows: version Active X 15.0.0.0.152 NPAPI plug in version 15.0.0.152. Record PPAPI version is not installed. (I looked that up and it seems that this is not for my Windows XP. The flash drive, I installed was 15X32_mssd_aaa_aih (i) .exe. This is the manual I have asked me to download on support.mozilla.org... then he gave me a specific plug-in. Even though I knew I got it, I tried to download the plugin. It happens to 66% full download and application in use error (because I already have) and it automatically opens the window of IE to try again. I know very well that I have the most updated version. For some reason any Firefox just don't recognize it. I restarted my computer. Earlier, I have reset Firefox and regave permissions on my plug ins. I had honestly never one fix, I can do. Help please. I'll lose my religion if it even worse me! Thanks to you all. Oh and as you can see there, it's say I have Adobe Shockwave for Director Netscape plug-in, version 12.0.5.146, which is not true. My Control Panel, Flash section disagrees and says that I have 15.0.0.152.

  Lisa, I'm sorry that I can't find a download link for the old version of Flash Plugin 10.3 that I use, but I can't find it on the Adobe Web site.

  Adobe Shockwave Player 12.1 is not the same thing as Adobe Flash Player Plugin, which is also known as the Shockwave Flash.

  There is also a named Shockwave for the Director which is something else again.

  And with different versions of Flash Player for - IE = ActiveX, Firefox = Plugin and Chrome = pepper, they couldn't do worse if they planned to confuse the average user, because they were able to do so inadvertently.

  I curse Macromedia (which was acquired by Adobe) to use the name "Shockwave" on both of their programs.

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• IS does not recognize the drive HARD internal

  I have three, all from a school lab, that have been linked with other positive points and printers.

  They are connected are not together anymore.

  All three have a floppy drive and a HARD drive. Will only boot from the HARD drive.

  At startup, the other two do not recognize their HARD drive and I use ea disk with the system in this regard.

  Since hard drives are not 'seen' I am unable to do anything with them: fix, set up as a boot drive, etc.

  They begin with the usual chimes and the Mac with the question mark, I slip the disk in and they complete commissioning.

  The internal drive spin up and the indicator light flashes.

  They do not show the drive HARD internal on the screen, but will show an external.

  I haven't started to swap parts between the good and the other two.

  Does anyone have an idea on how to activate an invisible HARD drive?

  You will need to use the boot floppy disks to start the machines to run the repair disk, partition and format the HARD drive if it is still functional. Only then can you install Mac OS on the HARD drive. That's all that I remember.

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• Windows 7 will not recognize driver for HP Scanjet 5370c scanner

  I was not able to get Windows 7 to recognize the driver for my HP Scanjet scanner on my new HP Pavilion Elite a9200z desktop computer.  I tried to install the original driver delivered with the software that not only failed, but it was necessary to do a system restore to an earlier date.  After downloading the software update and the driver on the HP website (for the XP operating system. (No), the software successfully installed but Device Manager said there is no driver installed.  I tried Udating driver in Device Manager, but none were found on the system.  I'm afraid that because the driver is not signed by HP, this is perhaps the reason that the system will not recognize it.  I do not receive a message about the driver being made and has been disabled.

  Where would the driver have been installed under Windows and what would be the name of the file?  Is it possible to install a driver that has not been signed on Windows 7, even though I know that it comes directly from the manufacturer.  I came on this forum that says HP email support is no longer in effect for this scanner.  Scanner was working fine under Windows XP.  Thank you in advance for any help you can give me.

  Thank you for your response.  I posted the same question to the Board of Directors Microsoft as well.  One of the technicians gave me a link to a website that has software in support of scanners which pilots the manufacturer has not, for some reason, took worth to upgrade to Windows Vista or Windows 7.  I installed Vuescan driver bundled with the program which works perfectly, and my scanner HP Scanjet scanner 5370c is upward and great in Windows 7.  They have a list of more than 100 scanners supported by the program.  So, anyone interested should check the list before you buy the program.  No, the program is not free, but it is much cheaper ($39.95) that pitching on a scanner perfectly ideal of work and having to buy a new one.    Anyway, if anyone is interested in the possibility of using their scanner ' is no longer supported "with Windows 7, the website below might help.

  http://www.Hamrick.com/

• Satellite A200-1TS - Win XP does not recognize the new HARD drive

  Dear Forum,

  My HD crashed, I installed a new, but XP will not recognize.
  I created a new partition with Partition wizard home edition, and with a Mini XP bootable CD I can access Hd, reading and writing, but if I try to install XP from the CD of origin of the system does not have a usable hard drive.
  Any part of the material blocking this new HD? How can I install windows XP on a hard disk new?

  Thanks in advance for your help

  Can you please tell us what model of laptop do you have?
  Maybe you need to load the SATA driver?