cDAQ 9133 12 "MONITOR WHITE

Similar Questions

• TSM 1012 & cDAQ 9133

  Hi all

  I'm designing a HMI system with a TSM 1012 and a cDAQ 9133. There is one thing I can't find online resources: the touch screen has speakers? The cDAQ can produce the audio signal via the minidisplay port, but the monitor will be able to run this signal?

  Thanks in advance

  Hello

  Unfortunately, the TSM is really just a touch screen and it has no speakers mounted on it. So I'm afraid that the screen will not be able to run the audio port minidisplay

  Andreas Jost

  Technical sales engineer

  National Instruments

• XNET Signal list control deployed to target RT OR-cDAQ-9133

  I develop a VI to read and record the signals from the engine CAN. One of the requirements is that it will be a stand-alone application which runs on the target device, a device of real-time OR-cDAQ-9133 with a module NI9861. It also has a module analog thermocouple which is read and recorded alongside the CAN signals.

  in any case, I did the front panel so that the user can choose the CAN signals of a drop-down list of all signals in the XNET database and then run the VI to display and record the signals. On the development of PC, it works as expected, I can change the signals before you run the VI.

  When I build and deploy the project I am no longer able to do. The drop-down boxes are grayed out and do not respond to clicks. How to allow the user to choose signals to read and log?

  I've attached a picture to better explain the control of front panel, I have for the user to choose the signals. Nothing complicated just to select the node and right click to create the control. The image is what it looks like on the development of PC, I have not a screen capture of the target device.

  I was able to find a work around. I used an array of enum on the front panel controls that are then wired in a case surrounded by a loop structure for. This generates the signals XNET list based on the table of the enum. Probably not a more elegant solution, but it works and allows the CAN signals to choose in the front panel on the target of RT.

• The SD cards are recommended to be used with the cDAQ 9133?

  Embedded controllers that are the recommended type and size recommended SD cards to be used with the cDAQ Win7 9132 and 9133?

  Hardware specifications for two controllers, you will find that the SD and SDHC cards up to 32 GB are supported.  There is no model or brand recommended, but there are 16 GB (783658 - 01) and 32 GB (783659-01) maps available for purchase through the OR.  You can find those listed in the accessories section available hardware user manual.  See the fees section of the controller product page for more details.

  EDIT: Linked to the UNIFIED and product Messaging page

• (Redirected) MONITOR WHITE

  I HAVE a DELL MONITOR S2209Wb. SEVERAL MONTHS AGO, we HAD A POWER INTERRUPTION AND WHEN I TRIED TO START MY COMPUTER I have STRUGGLED to START THE MONITOR UPWARD. IT WAS WHITE FOR A LONG TIME. I KEPT TURNING THE COMPUTER MARKET AND IT FINALLY STARTED... A FEW DAYS AGO, A CB TRIPPED WHEN THE COMPUTER WAS IN USE. WHEN STARTING OF THE MONITOR WAS WHITE FOR A WHILE. NOW THE SCREEN IS BLACK AND THE POWER LIGHT WILL FLASH WHITE. I CAN'T TURN IT OFF WITH THE KEY. I THINK THAT THE COMPUTER WORKS FINE. WHEN I TURN IT ON I CAN HEAR IT WORKING AND I CAN HEAR THE WINDOWS STARTS THE MUSIC. EVERYTHING IS PLUGGED INTO A SURGE PROTECTOR. I READ SOME OF THE SOLUTIONS HERE AND I TRIED UNPLUGGING EVERYTHING AND HOLD DOWN THE BUTTON MAYBE IN AND THEN PLUG BACK IN. IT ME MISSING SOMETHING. MOST OF THE SOLUTIONS IS FOR DIFFERENT COLORED ON THE POWER BUTTON LIGHTS. I FIND NOTHING FOR FLASHING WHITE LIGHT. IS MY MONITOR FACT OR WHAT? I HOPE NOT. IT WAS A GOOD THING.

  It is always convenient to include the model of the computer, during the validation of a computer problem.

  Have you tried to use a "Known" work monitor, to see if there are any problems with the computer, if this monitor works without any problem, it seems that the S2209WB is toast and needs to be replaced.

  For more information, it would be preferable to this post in the Forum of monitors, here:

  http://en.community.Dell.com/support-forums/peripherals/f/3529.aspx

  Bev.

• HP G42-415DX: in a Setup dual monitor, perhaps armored secondary monitor white screen?

  I have a Setup dual monitor, where the laptop is tied to a 2nd monitor (TV) via HDMI. I mainly use the 2nd monitor. Can I empty the 1st monitor (laptop screen) screen, yet still use the 2nd monitor with lid open to access the keyboard?

  (I noticed with parameters changed in the Panel of Win7, I can close the lid without cutting [sleep, Hibernate or shutdown] computer and had to lower the monitor display 2nd to adapt to the screen.) But to use the keyboard, open the lid of the portable computer, which involved the 1st screen)

  Thank you

  Hi Kalad,

  I think the same as you do sometimes, especially when I watch a movie and you want that it will display on the bigger screen and the simultaneouly have the laptop screen is off.

  As you need to use the keyboard of the laptop and want the second poster only, which suggests to select the "Projector" only option in the pop-up menu by pressing the Fn + F4 key.

  & to come back again having two screens or single screen press Fn Key & F4 on your keyboard and select "Extend" or 'Unplug the projector' options respectively.

  I am an employee of HP.

  Kind regards
  Mundutha

  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.

  Click the "Thumbs up" button to the lower right side of my post to say thank you! ***.

• JavaEE monitor white screen of dashboard

  last night I upgraded 5.6.2 to 5.6.4 Foglight and updated Java 5.7.4 agent 5.8.1. Now, after the upgrade when I navigate to the dashboard > Custom Applications > monitor I see a blank screen. All the world is facing this problem before? Help, please...

  

  Support the case as soon as POSSIBLE!

  Golan

• Error with KbdStub.exe, monitor erased on Vista

  * original title - Kbd Stud has stopped working... this message every day... my monitor white, except for the icons at the bottom of the screen. *

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: KbdStub.exe

  Application version: 1.0.9.1

  Application timestamp: 4884f1e6

  Fault Module name: C:\Windows\system32\mscoree.dll

  Fault Module Version: 6.0.6002.18005

  Timestamp of Module error: 49e0421d

  Exception code: c0000135

  Exception offset: 00000000000b8fb8

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: fa3e

  More information 2: ac0507478d1c5bd693cfc4fe3987e900

  Additional information 3: fa3e

  Additional information 4: ac0507478d1c5bd693cfc4fe3987e900

  Hi Don,

  Please see the following diagnosis:

  Start the computer in safe mode and then run boot error may be related to a program. After the clean boot, we can find the program at the origin of the problem.

  Start the computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Clean boot
  http://support.Microsoft.com/kb/929135

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• No preview in the monitor Panel

  Hi all

  When I start the reading of the images, there is no preview available in the monitor (white screen). Only arrested sequenzes appeared and the sound is played. This problem occurs regardless of the used files. When you first start it is shown failure: problems with the Intel's Graphics.But the driver is updated to the latest version. Furthermore it is not possible to change the graphics card setting, as described in the help of Pre.

  1. Select Edition > Preferences > General.
  2. Deselect the option enable GPU and playback in the playback Preferences dialog box, click OK to confirm.

  This menu is not available!

  Thanks in advance for your help and best regards,

  What model of camcorder is your coming video and what format is it?

  When you started your project, including project settings have you selected? If you have selected the right project settings for your video, you will NOT be able to see red over your clips lines when you add them to your calendar. This is the case in your project?

  Have you ensured that you have the latest version of Quicktime, by the requirements of the program? Have you passed to the site ATI or nVidia and assured that you have the latest drivers for your graphics card?

• Screen flashing horizontal lines after replacing the RAM

  Hello world

  Today, I replaced the original 2 2 GB RAM each with 2 other 4 GB each (Kingston) for better performance.

  I have a Macbook Pro end 2011 15 ", IOS 9.3.1.

  I opened the computer it vacuum cleaner very carefully, with the lowest power and then I removed the two RAM.

  I'm not new, the machine worked perfectly for 20 minutes, then the screen went black (electricity was running in it, I could see some lights on the bottom), I did close it with the button, turn it on and horizontal lines appeared.

  I turn again and nothing has changed. I replaced the new memory with the 'old' and I still have horizontal lines that cross the monitor (white, grey, black).

  Any idea of what is happening and how to fix it?

  Thank you in advance!

  That could be the problem:

  http://www.Apple.com/support/MacBookPro-videoissues/

• Lenovo T560 and Dock OneLink Pro

  I have a ThinkPad T560 (20EV000YIX) with among Pro Dock (4X10E52944) and 2 external monitors connected via DVI - I and DisplayPort ports (with VGA adapter).

  The problem is that both monitors randomly every few minutes became black and reappear after approx. 1 second.

  I've already updated the T560 and OneLink drivers but no result.

  Another question: is possible to configure the OneLink to use the video card Radeon R7 instead of integrated Intel 520HD?

  Thank you.

  Gigi

  Reconnected the old monitor whit a DP adapter-> DVI - I and the problem goes away.

  There seems to be a problem with the adapter DP-> VGA or VGA cable at this point...

• NEITHER 9212 - issues with sampling frequency, number of samples and size of buffer or slowness comes together with thermocouple module

  To begin with, I am very new to labview and unfortunately on that my first task is to build something rather complicated for a project that my company works. Fortunately it is especially followed rather than control critical processes.

  Currently, I have a cDAQ with modules, DI, AO, and TC.

  cDAQ-9133

  NEITHER 9472

  NEITHER 9421

  NEITHER 9263

  NEITHER 9205

  NEITHER 9212

  I'm currently running read-write for all 5 of these modules in parallel while loops and analog and digital inputs/outputs modules that all work as expected. Each loop requires 1 sample per channel through the wizard DAQmx etc for each module and I got can interact with all the asyncronosly inputs and outputs which at the moment is the goal. I can switch power switch for each module save memory, or if the need arrives later.

  My problem is that the module TC (NI 9212) when tilt on which allows the acquisition of sample 1 loop seems to take much, much longer to collect samples. I have played with different acquisition parameters and can seem to get a continuous flow of data when you use streaming samples, or even when specifying N-samples but I come in questions where the "application cannot catch up with the hardware.

  I tried to find an optimal number of samples/sampling, rate, etc I can get an update of temperature more than every 1 to 2 seconds, but if I set the number of samples that are high enough to apparently get a constant flow, what ends up happening waveform graphs seem to lag behind the actual data, and that's where I get errors. I only want 1 sample per channel per cycle anyway. Yet once, all the other modules in the cycle with less than 100ms delay between acquisitions but the module thermocouple ends up being 1-2 seconds. It's okay because in our application temperature should not rise/drop very quickly but its boring nonetheless.

  I have the acquisition set up for the same (NI 9212) thermocouple module was like my modules of analog and digital inputs (NI 9205 and NI 9421) take 1 sample every time the task is called so I'm having a hard time understand why do the same for the TC module introduced such a delay. Max sampling rate is supposed to be 95 samples/s/ch, so I guess that the delay must come from call the task over and over again in a loop.

  Synchronization and how you have configured the 9212?

  In the case of high resolution, it can reach 1.8 samples/s. see page 7 of the plug technique here for rates for the supported modes:

  http://www.NI.com/PDF/manuals/374389a.PDF

  -AK2DM

• (Laptop HP-2000) White screen, external monitor works.

  (HP 2000 Notebook PC / Windows 8.1, 64-bit) Still white screen, external monitor works fine. What components could be defective? This occurred about six months ago about a week after the expiry of the one year warranty. Nonfortuitous.

  Hello

  You confirm this problem is intermittent, and now its working fine, it means that the question would be the display cable. The display cable is loose. Issue can be fixed by rebonding the display cable, if the problem persists then the display cable needs to be replaced.

  This is the only reason why I asked you in the previous post if the problem was intermittent or display changed while moving the display cover.

  This particular problem has nothing to do with the temperature.

  Kind regards

  Sumit

  I am an employee of HP

• Monitor is white empty when you try to view the video full screen on youtube.

  I have a HP w2207h screen flat monitor. When I try to view online, such as YouTube videos, full screen, the screen goes to a blank white screen. Sound works, no picture. However, when I view the same video from YouTube in Internet explore everything works fine. Is there a setting that I need to solve this problem? Would appreciate your help!

  Try disabling hardware acceleration in Flash Player.

  See the videos in Flash will not play in full screen

  Blink the window "display settings":

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help01.html

• Satellite A300-1IL - monitor has white lines at the bottom

  Good evening

  about an hour, followed by my satellite a300 monitor has white lines at the bottom.
  I try to stop, change the resolution but i just turn on my laptop, the screen has this white line.

  It is a problem of monito'rs or videocar problem?

  Sorry for my ebglish

  Hello

  > It is a problem of monito'rs or videocar problem?
  It's easy to say; you need to connect the external monitor to the laptop and need to check if the same if possible lines on a second external display.

  If the lines were visible on the external monitor, so that the GPU fault is possible.
  Otherwise, it may be defective internal display.

  Welcome them