CDROM

Similar Questions

• Portege R500 - defective cdrom causes very common on self-test

  Hi all

  the internal CD-ROM drive in my R500 is no longer recognized. He went in the 'My computer' view in Windows XP. Sometimes he is shown as a unknown device in the control of the material, but most of the time that we show any. The cdrom still turns up to the insertion of a disc and seems to act "normal" (regarding the flashing of light, sound, etc.)

  Given that this fault has occurred, the power on self test takes about 2 minutes before the operating system is started later. In addition, the screen goes black for about a minute after it is finished with this startup resolved (Windows XP) first of all, low screen. Sometimes, the same occurs during closing.

  I don't know which is the reason why or if there is a third underlying cause, but he began to appear at the same time. Once activated the bios debug output, all the self tests have been printed as 'ok', but after the last test is finished, it is at a standstill (perhaps until some timeout kicks in).

  You have any suggestions or should I send it in (that would be quite unpleasant for me, depending on the machine)?

  Hello

  Are you sure that this problem is caused by the defective CD/DVD drive?
  Of course a material error could affect the power on self test (POST), but it is really hard to tell if it s caused by ODD.

  Hmmm, what you could do is remove the STRANGE to the laptop and to start the machine, in this case the MESSAGE should be transmitted correctly.
  If this isn't the case, so I doubt that the problem could be linked to the STRANGE

  However, if it s a hardware related issue, then the laptop should be addressed to the ASP in your country
  The R500 does not seem to be an old book so I guess that the guarantee is valid and the repair must be made free of charge.

• 250GB USB drive created I don't want cdrom drive

  Just installed a new hard drive of 250 GB USB. At startup it keeps creating this drive with some programs on it. I partitioned the drive, but the specific CD-ROM drive keeps coming back. As it is the first device to be seen from the usb drive, it allows me to connect the usb drive as a file server drive to my installed internet router that has a USB for purposes of files on it. This port does not recognize my drive, because of the cdrom drive presumingly generated. So I want to get rid of this cdrom, I don't use the one-touch backup features or protection of password for the drive anyway.

  Any ideas how to do this? Is a small partition on the Flash DRIVE or what?

  Hello

  I've never seen any USB HDD external who could create CD rom readers.
  Have you tried to format the first external HARD drive?
  I put t know exactly why it happens, but you suggested he keeps creating the CD rom drive with some programs on it at startup. Perhaps the preinstalled programs are the reason to create Cd rom.
  Try to remove these programs from the disk HARD (should first create a backup)

• I have lost my cdrom tools and utilities! How can I get another?

  I have lost my cdrom tools and utilities!
  How can I get another?

  You can order from the authorized Toshiba maintainer in your country.
  It s not expensive. Do simple call the guys :)

• Re: CDrom on Satellite M40 will not start

  Hi all

  My cdrom on Satellite M40-142 drive won't start!
  If I choose to boot from the dvd/cdrom, always my laptop boot from the disk. In my view, is a bios problem. Is it possible to reinstall my BIOS?

  Thank you very much

  Mario

  Hello

  > my m40-142 cdrom drive won't start!
  > If I choose to boot from the dvd/cdrom, always my laptop boot from the disk

  The possible reasons:

  1. it does not work. Is it read cd/dvd discs when you insert the?
  2. the cd/dvd disc you insert (ithink, you're talking about windows disk) not bootable.

  > . In my view, is a bios problem. Is it possible to reinstall my BIOS?

  Yes, you should check for Bios on the Toshiba driver page:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• How to force boot from the CDROM on Satellite M40 183

  I have error in the MBR on the drive in my laptop, it doesent from disk, before I had put into hibernation system (Windows XP).

  Now, I can't force boot from the CDROM
  in the bios, CDROM is selected as first boot-> nothing
  on bootking, I am pressing end F12 choose CDROM icons-> notking
  on bootking by pressing 'c'-> notking

  and I have a problem:
  -system does not boot
  -recovery disk will not start, and I can't fix it :/

  I'm sure that the cd drive is right.

  I recognized before, makes this hibernation, it is imposible to boot from the cdrom

  but there must be a way to force anyway.

  Thanks for any help.

  Mateusz

  Hello Mateusz

  The hibernation mode cannot be responsible for this kind of question. I'm sure that this option is properly put to the test and if there is some sort of suspicion it won't be available more.
  If you have any problem with MBR, it can also be damaged by some kind of virus. As far as I know that the easiest way to repair or rebuild MBR is to run the standard Microsoft called FDISK utility with a parameter/MBR, as
  A:\ > FDISK. EXE/MBR
  FDISK is a standard utility included in MS-DOS, Windows 95, 98, me.
  Please check this page http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/Default.asp?url=/resources/documentation/Windows/XP/all/reskit/en-us/prkd_tro_evwd.asp Microsoft
  Good bye

• Portege R100: CDROM USB cannot read Windows XP CD installation

  I download disk recovery and the start of my external USB CDROM drive successfully.
  Unfortunately, the USB CDROM driver cannot read my Windows XP CD installation that does not have the Toshiba Recovery CD. Product error (wrong damaged CD-ROM, please insert Recovery CD #1).

  Hello

  As far as I know you have a taken in charge and compatible CD/DVD external climb to boot from the CD.
  Do you use this car?

  Please check these discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232&MessageID=70382

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8991&MessageID=31246

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17323&MessageID=63247

  good luck ;)

• How can satellite 200 CD, I get my CDROM drive to work?

  Hi there, hope someone can help me with this. I got this Toshiba 200CDS/810 under win 3.11. My problem is that I can't find out how to install my CDROM drive...
  CDROM drive: 6 X XM-1402

  If you think you meet my emailadres is easier... Please do... [email protected].

  THNX

  Hello

  you have the driver CD Rom Moose or the original OS disks or CD?

  I had looked for the Dowload Driver Toshiba section but there is only a CD ROM driver for W95.

  Goodbye, Sam

• Satellite Pro 400 cdrom drive fits a laptop Satellite Pro 4300

  Can someone tell me if a cdrom from a Satellite Pro 400 drive fit in a laptop Satellite Pro 4300. I have no serial numbers or cdrom, sorry

  Hi Tony

  The first is about 11 years old and the second about six years. I really put t think you can use it. In my opinion, you must use the same drive.

• Satellite A105-S361 wouldn't boot CDrom or PXE Linux

  Hello

  I just bought a toshiba satellite A105-S361, I deleted all partitions & installed Linux operating system. After a few days, I find that, although everything works perfectly, I can't boot from the CDrom or network (PXE). No matter how I change the settings in the BIOS, it is just try to boot from the CD or network, it goes straight to the startup hard disk!

  I was wondering if the hidden partition that toshiba use for its "express media player", has nothing to do with helping start the laptop cdrom/lan as well!

  Otherwise, no idea why I can't boot from them?
  I'm really worried how to fix my laptop, should I have to re - install any OS!

  Hello

  First of all, you have installed Linux on the unit and Toshiba doesn't support this OS.
  Toshiba delivered and designed only with a Microsoft Windows operating system.
  I don't know if your question has anything to do with LINUX on your laptop but if the function m worked with the Windows operating system, so it must be a Linux question.

• Product #: H5Q13AA #ABA, bad driver for hp device. CdRom SATA DVD has DS8A9SH

  Hello, my HP Pavilion 23 (product #: H5Q13AA #ABA) suddenly had his CD/DVD-Rom stop working.

  It's an hp device. CdRom SATA DVD has DS8A9SH.  I tried uninstalling the driver and using the HP troubleshooting tool.  Nothing seems to work.  Any suggestions?  The player is acting normally, apart from the computer not recognize (the disc spins when you put it in, etc.).

  I am running Windows 8.1 with all updated.

  When I try to update the driver, Windows says that it is up-to-date.  It gives me this error message in Device Manager:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Thanks in advance!

  Hello:

  Please read the info at the link below.

  One of the steps of resolution, 2, 3, 4 or 5 should solve the problem.

  http://support.Microsoft.com/kb/314060

• USB drive w / CDRom virtual stalls Desktop

  Hello

  Toshiba laptop of a friend must be updated by key USB WLAn (from Chello.at) and mobile internet (for AON.at): Thoshiba SPA40 GR, model no PSA45E - 0024 M - Gr. Windowx XP SP3, IE8, Avast AV, Ashampoo Firewall; System clean and free of errors.

  I give below details but I think that I need new chipset drivers for the laptop and can't find it.

  two sticks out different do seem to have the requireed hardware (wireless and mobile broadband network adapter) and software required on an integrated virtual CDRom. The two clubs are working well on other machines, XP and Win2k.

  Problem: (with both sticks even) - sequence of actions:

  Stick is connected to the USB 2.0 location, shortly after the new hardware is detected and 'installed' (not really, see below). Paste the first flashes differently, but after a while systematically on every half second. thing notihng happens.

  Taskbar displays ikon 'removal of material", that does not work, but displays"delete drive G"clickable. If you click it, nothing happens.

  Opening of office shows no resources (disks) - No... neiterh C: or D: or whatever

  Opening Explorer shows a g (new): CD player, that cannot be opened.

  By Deskotp/context. Poster CD additional Device Manager: "virtual CDRom USB Device 0ace20ff", no symbol error at all.

  Changing 'See the disabled Devices' (or however this can read English) shows an unknown device with error-ikon. (Two is the WLAN device which should be installed the new drive G:

  Stick can be removed by ikon "remove USB device" in the taskbar; closure of office (or Solution Explorer, the same) leads to "the program is not responding." by clicking on "stop immediately" and the closure of office result in the start screen blank XP, nothing else, except the mouse pointer - no Startbutton, no taskbar, no systray... nothing.

  Maschine appears dead until the stick is pulled, after about 10 seconds Windows pops up again and works perfectly.

  I hoped that the updated chipset drivers would fix the problem (two with mater USB drivers or almost) m, but install inf and tryining drivers update these files has not changed anything on the sit.

  I would be very grateful of any suspicion, could be given to how to get this mande. To repeat the real problem: a "virtual CDRom" provided on the USB won't install. two, said virtual CDRom contains the software needed for the hardware (WLan or mobile Internet - there are two different keys, both show the same problem) must be installed.

  Googleing for "virtual CDRom USB Device 0ace20ff" spit many results, but none of the relevant information (very useful).

  Thanks in advance!
  Helmut

  Hello Helmut

  Fact is that Toshiba notebook itself works well and USB port recognize this device correctly.
  Problem is to use an additional device that belongs to an internet provider.
  In my opinion, they are responsible for the functionality and support.

  Have you tried to contact them and ask for help?
  You have clearly stated that this USB should work with the Windows XP SP3 home edition?

  Here in the forum in this virtual world, it is not easy to offer concrete help with this stuff.
  I really think you should clarify this with the internet provider and their support. Pack your computer laptop in the bag and bring to the store of Chello, put on the desk and ask if they can configure this device for you.
  They must have good experience with own products.

• FIRMWARE for CDDVDW TS-U633J SCSI CdRom DEVICE

  I can not able to write any cd, dvd in my time of each laptop when I am he says need latest firmware. my CD-ROM/dvd-rom is hp CDDVDW TS - U633J SCSI CdRom Device

  Hi Vkanth,

  I'd be happy to help you if necessary. How can I find my model number or product number?
  Please respond with an operating system that you are running:
  Operating system Windows am I running?
  
  Please let me know.
  
  Thank you.

• Cannot boot from the CDROM on a satellite A100-549

  Hello.

  I think I have a problem with my BIOS because I can't start something of my CDROM.

  I removed the recovery off the DVD-ROM drive CD and restarted my computer.

  Then set up the boot sequence to boot from the CD, and nothing happened.
  My laptop just start with the normal boot sequence, I mean from the hard drive.

  I put a livecd for the CDROM drive and the effect was the same, the cd does not start and the computer began the ususal boot sequence.

  Can someone tell what is the problem?

  Thank you

  Hello

  Try to use all possible methods to set ODD as first boot device:
  1. press the key C immediately after switching on the unit, keep it down for a few seconds
  2 put in the BIOS
  3. choose F12 after departure upward and choose the CD/DVD device

  Honestly, it's very strange and if nothing helps, maybe you should contact your dealer or authorized Toshiba service partner directly. They check the disc.

  BTW: have you noticed any other problems with ODD Windows?

• Satellite Pro 4320 - replacement of CDROM

  Hello

  I'm new to the forum here so apologies for any bad "neticate".

  I recently acquired a Toshiba Satallite Pro 4320 and tries to replace the CDROM drive with a CD - RW DVD combi drive. I took every screw I can find out and he will always come out! How the hell can I replace the CD-ROM unit? I thought that just, he slipped on the side. Someone at - it a scheme of ventilation to show me how to disassemble?

  Help!

  Thanks in advance

  Barry

  I have an exploded view of a SP4600.
  Not the same, but maybe you can use that to understand?

• UJ-840 CDROM in a Qosmio F20 years does not correctly read the media

  Hi people,
  I m getting desperate now! Have a dissitation I need to access with a cdrom (UJ - 840 years) on a Qosmio F20 running Windows Vista Ultimate.
  A message says that it is not connected, even if it will read CDs. Can someone help please. When I insert the cd, it says it's empty and I want to format it?

  Help!

  Hello

  I agree with snipe, should help to install the latest chipset drivers. Try to start with a cd live linux to check if your DVD drive is working properly.
  and without windows.

  Welcome them