Certificates QuickVPN and WRV210 ignored

Similar Questions

• "error loading the c:\ProgramFiles\CommonFiles\parentoLogic\UUS2\UUS.dll module is not found" I'm cluelss and generally ignore this message. Should I try hard or leave?

  Original title: error loading the c:\ProgramFiles\CommonFiles\parentoLogic\UUS2\UUS.dll module could not be found

  I'm cluelss and generally ignore this message. Should I try hard or leave?

  Thank you

  This link may be a little more useful:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

• All light Emily let me (security certificate expired) and an error in what is the ssl solution

  All light Emily let me (security certificate expired) and an error in what is the ssl solution

  Hello

  ·         What is you receive the exact error message?

  ·         When you receive the security error certificate expired?

  You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• When I try to get into google I get a certificate error and do not trust the site

  When I try to enter in google site I get a certificate error and a message not to trust site and put / add www in the address bar, but it does not work either thank you for anyone who can help

  Please start with the basics:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Report with the results if you need assistance. MS - MVP - Elephant Boy computers - don't panic!

• AnyConnect user using the user certificate authentication and LDAP authentication

  Hello

  I'm trying to implement the Anyconnect VPN for my office. Now, I want the user to authenticate the user certificate based (which is install user local system are we) CN value and LDAP authentication. A help how to achieve this requirement. We install Certificate ROOT and INTERMEDIATE Godaddy and even already installed ASA. Also, we have the user certificate installed on each system user to authenticate the user.

  Any help please.

  Hi subhasisdutta,

  This link will certainly help you with the configuration:

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  Hope this info helps!

  Note If you help!

  -JP-

• OpenSSL with 'Cisco VCS Certificate Creation and use - deployment guide. "

  Hi team,

  To prevent users to log on with the VCS Highway, we want to use OpenSSL (version: 1.0.1p 9 julio 2015), but I am facing the following problem:

  1 - I can't implement the command "touch index.txt".

  2 - I can´t implement the command "openssl genrsa-aes256-out private/cakey.pem 4096"; and when I apply these commands I get "OpenSSL is not recognized.

  I did all the steps that says "VCS certificate creation and use Cisco".

  What could be the matter?

  Thanks for your advice.

  Kind regards

  Bill

  Already explained why touch does not, simply create the .txt through windows command file.

• ORA-31693: Data Table object 'AWSTEMPUSER '. "' TEMPMANUALMAPRPT_273 ' failed to load/unload and being ignored because of the error:

  Dear all,

  OS - Windows server 2012 R2

  version - 11.2.0.1.0

  Server: production server

  ORA-31693: Data Table object 'AWSTEMPUSER '. "' TEMPMANUALMAPRPT_273 ' failed to load/unload and being ignored because of the error:

  ORA-02354: Error exporting/importing data

  ORA-00942: table or view does not exist

  When taken expdp and faced error mentioned above. but expdp completed successfully with waring as below.

  Work "AWSCOMMONMASTER". "" FULLEXPJOB26SEP15_053001 "finished with 6 errors at 09:30:54

  (1) what is the error

  (2) is there any problem in the dump because file as above of the error. If Yes, then I'll resume expdp.

  Please suggest me. Thanks in advance

  Hello

  I suspect that what has happened, is that demand has dropped a temporary table to during the time that you run the export - consider this series of events

  (1) temp table created by application

  (2) start expdp work - including this table

  (3) the extracted table metadata

  (4) the application deletes the table

  (5) expdp is trying to retrieve data from the table - and gets the above error.

  Just to confirm with the enforcement team that the table is just a temporary thing - it certainly seems it name.

  See you soon,.

  Rich

• Why tabs, windows and sometimes ignore the shortcut keyboard (CMD + W)? I keep having to go into file > close tab

  Tabs in Firefox seem to ignore my orders sometimes seemingly random. Perhaps even more so when the tab contains a video, although I could be wrong.

  I use a 13-inch, mid 2009 Macbook Pro installed OSX 10.10.2 (the latest build), but this also happens on 17 inches from my father-in-law, Early - 2008 Macbook Pro as well.

  If a plugin like Flash has focus, then the plugin gets all keys and you have to click outside the plugin to remove the development of the plugin and make the keyboard work again.
  I don't think that protected by Flash mode applies to Mac.

  On a Mac, you may also be unable to move to HTML5 media as an alternative player, because with this drive will work the keyboard shortcuts.

• All https: Web sites know the untrusted certificate errors and appears as the provider cert Digitalmarketresearchapps Pty Ltd. No virus found on my system.

  I started all of a sudden the problem "untrusted connection" on earlier work https: Web sites with the "not provided any transmitter channel" as a reason. I tried all the proposed solutions and nothing works. I ran several programs antivirus and no viruses or malware detected. I don't have any such installed ESET suggested in the previous solutions. Display of certificates for the default sites shows that the provider in all cases is 'Digitalmarketresearchapps Pty Ltd'. Certificates are always a start date and an expiration of 2039. I think I picked up something that causes the problem, but as I said, none of my antivirus/malware programs are detecting anything.

  I had this problem as well, and he ended up caused by the installation of the E-Rewards application notify. I had to uninstall and then restore my computer to an earlier time to fix the signer of the certificate again to "Thawte Consulting (Pty) Ltd". I contacted E-Rewards to let them know and ask why this is happening.

• After upgrading from Vista created a new documents folder and now ignores the original

  Last week I updated my computer (which I believe has an update of the graphics card and some windows stuff) using Windows update and left while he was closing. I guess what he finished close, but as I was leaving for the weekend, I can't be 100% sure and this weekend my house loses power at least once.

  As for the problem, at windows startup today made first time setup that works normally when you connect to a user account for the first time. Applications of Sidebar by default loading, the default value of the user interface (that I don't use, so it was the first sign), and I found that on the opera opening, all my favorites and settings were gone.

  At the opening of my documents, I found that they were completely empty of content, including all hidden folders where all of my settings the user should be.

  Navigation around the computer, I find that this will C:\Users\USERNAME\ my documents are still intact, but are ignored, with all the shortcuts leading to my documents redirect me to the 'new' documents folder, which means that for all purposes useful all my user settings for all programs that store data in the documents have been reset.

  Maybe someone has an idea of what may have caused this?  Personally, it's one of the strangest bug I've ever seen in any version of windows, and I'm not sure how I should go to deal with it.

  Update:

  To check the path of the 'new' documents folder, it appears as C:\Users\TEMP

  This means at least all of my original documents folder has not been deleted, but I'm trying to support everything up to an external drive where vista decided to replace my old documents folder entirely.

  Hello

  You can perform a restore of the system on the computer to restore the previous settings again.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information follow the link below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Once you've done the system restore perform the update of Windows once more and check what is happening.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Client certificate authentication and proxy HTTPS WSA

  Hello

  on a clients site, we have a virtual Proxy WSA with WCCP running behind a firewall of ASA. Only we are facing a problem: the customer has a site that authenticates the client through the certificate. It does not work. If I dasable the transparent proxy for this host, everything works fine.

  I solved it now bypassing the proxy server for the spicific site. Is there another solution to allow clients to authenticate using certificates to a Web site?

  Hello

  Does it means that websites (some sites) request for client certificate to authenticate during the SSL negotiation?

  If this is true, can you check your option since default CLI interface HTTPS when HTTPS servers request certificate of the client during the handshake, WSA will respond with unavailable certificate and the handshake will normally be breaks.

  To check this:

  1. log in to the CLI
  2. control of type advancedproxyconfig
  3. type HTTPS
  4. keep pressing enter to accept the value by default until you reach "measures to be taken when the HTTPS servers request certificate of the client during the handshake:" and change it to "get through the operation.

  5. keep pressing enter until the initial scope guest
  6. type commit to save the change.

• Conflict of subnet address QuickVPN and IP

  I have some connection problems with some of our clients.  I came across this in the VPN documentation: "To avoid conflicts of address between the LAN router and routers settings VPN users, do not configure your LAN with a common IP range like 192.168.1.x."

  In my view, that it is the root of our problems of connection.  My question is, is this the QuickVPN client-specific requirement, or will it be implemented with a VPN client out of 3rd so?

  Thank you.

  Hi-

  You can try to use the PPTP server in the RV042 but Qvpn is a tunnel of split and does not send any remote network via vpn traffic. So if your local subnet and a remote subnet are the same, your traffic will never leave your local network. Seems like you need a vpn client using the complete tunnel

  Hope this helps,

  Jasbryan

• ANyConnect Client certificate authentication and verify the Client against the Microsoft AD using DAP via LDAP domain membership

  Hello

  as described in the title one want to connect with AnyConnect Secure Mobility Client 3.0.2052 ASA 5540 Version 8.4 and licence Premium SSL.

  Customers using Maschine certificate to authenticate to ASA. It works very well.

  Now, I want to install a DAP to check the customer against the Microsoft AD using LDAP. I have configured the LDAP server in see ASA:

  AAA-Server LDAP protocol ldap

  AAA-Server LDAP (inside) host ldap.com

  LDAP-base-dn DC = x DC = x, DC = x DC = com

  LDAP-scope subtree

  LDAP-login-password *.

  LDAP-connection-dn *.

  microsoft server type

  I see that it works if I test via the testbotton server in ASDM and I also see in CLI "debugging ldap 255". But if I configure in DAP: AAA attribute ID:memberOf = Membre_domaine I can't see any request to the LDAP server as I try to connect with the Client und does not correspond to the DAP.

  No idea where the problem lies?

  Thanks in advance

  Hi Klaus,

  DAP will not make any call LDAP itself, it will only act based on the attributes received LDAP via the LDAP authentication or authorization.

  So you will need to enable the LDAP authorization in the tunnel - or connect to groups.

  Once you have, you can either use DAP or a map attribute LDAP for accept/deny access, see the example of these two methods.

  HTH

  Herbert

• Charger, Unload SWF and WARNING: ignorance of the attribute 'safe '...

  Hey all

  I just tried to load a swf into another.  in my document class, I have the following line of code in my constructor.

  var loadBoard:LoadBoard = new LoadBoard ("Directory.swf");

  in my LoadBoard class:

  package com.myproject

  {

  import flash.display.Loader;

  import flash.display.MovieClip;

  import flash.net.URLRequest;

  /public class extends MovieClip LoadBoard

       {

  public void LoadBoard(nameOfBoard:String)

            {

  var boardLoader:Loader = new Loader();

  addChild (boardLoader);

  boardLoader.load (new URLRequest (nameOfBoard));

  trace ("swf must be loaded");

            }

       }

  }

  "In my console I get the following when I debug.

  [SWF] U:\fullPath\Directory.swf - 69 058 bytes after decompression

  [SWF] U:\fullPath\Directory.swf - 2 067 bytes after decompression

  [SWF] U:\fullPath\Directory.swf - 322 606 bytes after decompression

  [SWF] U:\fullPath\Directory.swf - 112 558 bytes after decompression

  [Unload SWF] U:\fullPath\Directory.swf

  Warning: ignorance of the attribute 'trust' in the policy file to http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML .  The 'confidence' attribute is permitted only in HTTPS policy files and socket.  See http://www.adobe.com/go/strict_policy_files for more details.

  Don't know why I get this warning when I google it, the error has to do with trying to load a file from another domain. My Directory.swf file is in the same place as my main swf, the bin-debug folder.  Also the Directory.swf does not seem to load into my main swf as I do not appear in the flash player, when I run my application.   I'm also a bit confused about the [Unload SWF], I don't ask for anything for him to unload my swf.

  I use FB to do all my coding and debugging if it matters.

  Anyone has any ideas.

  Thank you

  you use a tlftextfield in Directory.swf or elsewhere?

• Index of Smart, stop list and always ignore

  I'm experimenting with the smart Index Wizard and you want to use the Stop List, always ignore list and list of expressions to control what keywords it generates.  However, I am a bit confused about the difference between the Stop List and list always ignore.  I read the help, but it says simply that the Stop List is for common words, such as conjunctions, and the list still ignore is for keywords.  It would be fine, except the default lists contain many of the same words (even if they are disparate files).  To add even more confusion, the Stop List cannot 512 characters (as if I'm going to count), which brings me to wonder why you would even both with her?  Am I missing some subtle but crucial differences between these two lists or can I use the list always ignore and ignore the Stop List?

  The difference between the two is that we're associated index and the other is research associate. The list ignore is used when you use the feature of automatic indexation of HR and ignores the words or phrases in the text when you decide which keywords to add index. The Stop List is designed to ignore certain words that create the "noise" when you search for topics. Generally these are short words (for example 'a', 'to', 'year' etc.).