CF 10 in Win 7 do not load resources

Similar Questions

• Plugin broke if called from WebClient V6.0 without port - could not load resources

  Hello

  our plugin works for version 5.5 and 6.0 without problems.  But we noticed that when the Web Version 6 Client is installed there is a new URL for the Client on the start menu.

  https:// < vcenterfqdn > / vsphere client (no port is in the url)

  When it comes, and the user connects, he sees the message "cannot load the module resources... '. "for our plugin.

  If the user starts the web client with the correct port;

  https:// < vcenterfqdn >: client/vsphere-9443

  the plugin works as expected.

  So is there something that we must do in our facility - or with the plugin to make it work when his name without a port?

  Thanks for the info

  Cathy

  You must have missed this post: 2 important for your plugin 5.5 reminders is compatible with the Web Client 6.0

  The fact that the ContextPath Web must be prefixed by client vsphere / was in the notes of version SDK 5.5 since the beginning. Make sure you always read that the :-)

• Re: Satellite L50-B05D cannot load Win 8.1 - not found boot device

  Hello

  I have a C50-B05D Satellite and I recently downloaded the bios update and I applied it to my system. When I did it said it contained the update already. Having been on the laptop for a while, I closed the lid and it turnt. When I turnt back on Windows would not load and a bootable device not found message occurred.

  Any help is appreciated

  Thank you

  You can enter the BIOS settings?
  If Yes check it please if the HARD drive is listed and recognized correctly. By default the BIOS settings and try to restart your laptop.

• Win 7 32 bit wudfsvc service does not start because the wudfpf driver is not loaded

  Hello

  I'm unable to connect USB devices like camera and phone the driver installation fails. The error can not remember (logging this from another machine) but something like "service not loaded or marked for deletion. Concluded that the Wudfsvc service is not started, even if it is marked as automatic. When I try to run it manually I get an error. Looking at the event log indicated that the dependent wudfpf driver is not loaded. I looked, and the driver is it physically in C:\WINDOWS\system32\drivers. Not sure where to go from here.

  Thank you

  Can you open regedit and navigate to the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WudfPf

  In this key, in the right window, is an ImagePath value

  Are the data for ImagePath what follows? :

  system32\drivers\WudfPf.sys

• My HP C6380 shows as offline for the wireless. Win 7, disc does not load.

  My HP C6380 shows offline wireless printing but the printer tells me it is plugged on the wireless.   The installation disc does not load as my computer is Windows 7.  I was able to print with the USB cable.

  Hello

  Download and run the Windows 7 Full Feature software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-74902-1&cc=us&DLC=en&LC=en&OS=4063&product=3560280&sw_lang=

  Select Add a device, and follow the steps to reconfigure your device through the network.

  Shlomi

• Dreamweaver CS6 does not load on Win 8.1.

  I installed subsequently CS6 Web on a machine to earn 8.1. Dreamweaver does not load. I get the message "Unable to locate the resource file in the Configuration folder." So I as it has proposed and reinstalled later. Still the same message. Here, I searched for an answer, but the only position I found associate concerned CS4. What should I do to get Dreamweaver to work for me?

  If it were me, I would try a cleaning/reinstall using the Adobe cleaning tool: use of the cleaning tool CC to resolve installation problems. CC, CS3 - CS6

  It almost looks like a permissions problem, the user account that you have installed under has full administrator rights?

• 26 of Firefox does not load the home page. Instead, it loads the previous session (and that includes all tabs). It does not matter how Firefox is closed.

  26 of Firefox does not load the home page. Instead, it load the previous session, regardless of what has been entered in 'Options '. The browser runs in Win 7.0 64 bit; Norton Internet Suite 21 provides security features. There are some solutions 'cloud', also running as Google Drive, box, Skydrive and Cubby. The browser behaves in the same way in all my machines (installation and the OS is similar to that described above) and no amount of reset 'Options' seems to affect it. Nor is it affected by the way that Firefox is closed. This is obviously a bug that should be fixed.

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/about:config

• At the start of what Firefox says "could not load XPCOM.

  My desktop is running Windows 8, which recently crashed. Since then, whenever I start, 17.1 Firefox (which is in the folder startuo) does not load, but shows an error window saying (unable to load XPCOM). Rejecting the window then allows me to start Firefox myself. I uninstalled Firefox (but not personal stuff), downloaded a new copy of Firefox 17.1 and re-installed... same thing happens.

  Just to clarify... This only happens only once, after the initial start of the desktop computer. I close the error window and everything is fine after that.

  Bright ideas please?

  What makes XPCOM reference? A missing dll file? can I find this file elsewhere and move it to the correct location?

  Many ways.

  Thanks again for all the responses.
  I now put Firefox in my 8 and restarted Windows startup folder.
  All right, Firefox (or Thunderbird) starts as it is supposed to and there is no sign of an XPCOM related error message!
  So... I have to assume that the problem was (somehow) caused by crash my Windows 8 and that (somehow), remove the Win 8 of Firefox startup folder, restart, then put Firefox in the startup folder, and then restart, has put things back where they used to be. A little strange, but I hope that the above may be useful to someone else with a similar problem in the future.
  Well cordially to all.

• Not load the virtual bus: warning setupDiEnumDeviceinterlaced() return code 259

  When I start my computer, I'm getting following error messages.

  setupDiEnumDeviceinterlaced() 259 return code

  followed by
  Virtual bus not loaded.

  Someone knows it please, what is this error and how do I get rid of him?

  Thank you

  Lee

  To be honest, this is the first time I see this WARNING
  If goggled a bit and found this MS article on error message: Virtual bus will not load

  http://support.Microsoft.com/kb/921440

  Looks like the NIC (LAN or Wlan card) might use a virtual bus driver who could not be loaded

  However, this story sounds really strange first MS article talks about Win XP and Windows Server 2003

  I guess that your laptop computer with Vista

  My recommendation is simple; Take the Toshiba Recovery disk and try to define the notebook back to factory settings. Then check if the error appears again

• Satellite L500 will not load beyond the screen "Welcome".

  Hello

  My Toshiba Satellite L500 laptop will not load beyond the screen "Welcome". The right slider thing keeps going around and around, but won't on my desk.

  Last night, he went into a temporary profile and he got a message saying "another profile cannot load at this time please try again later".

  Any help would be greatly appreciated.
  Thank you
  Kara

  The error message is not known to me and also looking in google didn t get advice.
  Maybe your Windows operating system is confusing upward.

  Have you tried to boot Win 7 in safe mode?
  Try this. Restart your laptop, press the F8 key.
  In advanced startup options, select the option called Mode without failure.

  If the laptop does not start Safe Mode, try the last good known Configuration option.

  If this n t help, try to fix my computer. Here, you can choose between different settings.
  Who could solve that problem is HARD drive recovery that helps you define the notebook to factory settings. But it also means that your disk should be formatted!

  So be aware of this!

• Satellite A500-19 q: Win 7 does not-UNMOUNTABLE BOOT VOLUME

  HY everybody,

  I work for 2 months with my new race A500-19 q Win 7 Home Premium 64 bit.
  Last night the system was regularly interrupted with the command "shutdown" of windows.
  Today, the machine does not load win 7 in all.

  If I let the work load, the system reached the blue screen with "UNMOUNTABLE_BOOT_VOLUME".
  If I try to restore the system with the recovery dvd made some time ago by the Toshiba utility him begins to load information, but after some research on hard drive, he stops with black screen and the cursor arrow, but nothing else.

  I downloaded and burt disk repair Windows 7 64 bit, but as already sad, starting the system of loading but it does not get to the end.
  So it seems impossible to carry out the command "chkdsk /f.

  What should I do finally?
  Thank you

  Post edited by: MikeB_2

  Hello

  The cursor blinking in the upper left corner means that something might be wrong with the HARD drive or partition on the HARD drive.
  I had this problem a few years ago on my laptop and in my case that the HARD drive is dead, it was a head crash.

  In any case, I think you should check if the HARD drive can be formatted using another disc
  You can try a Linux live CD or something like that

• Satellite A660 - beep when the CPU is not loaded

  Hello, I have another problem with my new Satellite A660-1FL.

  I replaced the built-in hard drive of Hitachi against the many Toshiba MK3265GSX quieter. Now I always hear a beep when the processor is not loaded. It's especially annoying when I read the documents. I read on the internet that the problem occurs with the C4 State.

  How can I solve this?

  Hey Buddy,

  Hmm... This strange because I have Satellite A660 in front of me and can t s such notice beep. Everything is perfect and it s very quietly.

  What version of BIOS you have installed? My A660 shipped with BIOS version more recent 1.80 - WIN and Windows 7 64-bit.

  Take a look on the Web from Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com

  I hope that helps! :)

• Dolby audio driver does not load after upgrade Windows 10

  Just upgraded to 10 Windows on my Ideapad N585. At the start, get a Dolby audio driver has not loaded. I recall this issue upgrade to win 8 to 8.1, but can't remember the fix. Should we wait for an updated driver? I have sound, but do not know what driver it uses. (have not yet found drivers yet)

  Another question, I discovered, is that I could not disable the touchpad through Fn + F6. The driver settings momentum have a box to disable the touchpad when an external pointing device using, however, so this isn't a major problem.

  Thanks - I think that I managed to update the driver for the device (which was not so easy to find) Manager - who or Windows Update done automatically. He now works properly again. I have a feeling I'm going to repeat this exercise a lot with Windows 10.

• After recommending the bios update, hp dv6131od running xp pro sp3 will not load windows - is there a wa

  After installing an update of the bios recommended on the hp website my dv6131od running xp pro sp3 will not load windows

  Update does not seem to have problems - failure, lack of time for flash, backup, etc.

  boot sequence seems normal (finds it a bootable cd in the drive, etc.), but windows won't load in safe or other mode

  next steps?  is there a way to access the BIOS?

  Thank you

  There is a simple solution to this problem.  The HP Online Crash Analysis Team has finally responded to my email after 34 days.  I had given up hearing from them despite several requests to repeat.

  I had completely disassembled the laptop trying to find the bios setting the jumpers on the motherboard in response to an idea contained in one of the PM, I sent... all to nothing does not...

  OCAT told me to look in the BIOS under "system configuration" for the Native SATA support.  The last update of the BIOS resets this point 'activated', but that only works for Vista & Win 7.  This must be set to "disabled" for XP and previous operating system.

  I hope that this post will save someone having to wait 5 weeks invest hours of work for a solution that took 3 minutes!

• How to find a file wmp.dll - has not loaded when installing xp

  During the installation of xp does not load the wmp.dll file - does it affect my screen resolution which is now fixed to the
  most low and can not be reset - and how can I fix this?

  During the installation of xp does not load the wmp.dll file - does it affect my screen resolution which is now fixed to the
  most low and can not be reset - and how can I fix this?

  =======================================
  No guarantee... but for the wmp.dll issue, the following
  the article may be worth a visit:

  WMP. DLL
  http://www.updatexp.com/wmpdll.html

  For the problem of resolution of screen... There is a possibility
  that you need to update your video driver.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Proceed at your own risk *.

  Try searching the website of your video
  MFG. the adapter for a compatible update Win XP
  video driver. Or... If your computer is a laptop...
  Search the support site for your computer
  Reference of the manufacturer.

  If you do not know the make and model of your
  Video adapter, see the documentation that
  supplied with the computer.

  Also you can find info on your video by driver
  go to Device Manager: you can launch
  By clicking Device Manager on... Start/run and
  type or copy / paste:
  devmgmt.msc
  And then press ENTER.

  Expand "Graphics cards" and right click
  the name of your graphics... then
  choose... Properties / tab pilot... FYI.

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. In addition, installation
  instructions that should be followed closely
  should be available on the support site.

  Good luck.