cFP-DO-401 fuses and flyback diodes

Similar Questions

• FieldPoint read the cFP-1808 and cFP-DO-401 output channels

  Can I used the FP Read.vi to read the current state of the digital output modules on a CFP-1808 (namely a cFP-DO-401)?

  I don't have the material here to test the code, I want to develop.

  Thank you

  Ryan

  Yes.

• Installation problem - 10.12 sierra Fender fuse and macos

  Hello world!!!

  I can't install the software fender fuse guitar amp on my mac pro with sierra 10.12 book!

  Due security installation authorised download preferences on my mac, in the sierra of new OS it is not "anywhere" button so I can't install fender fuse!

  How can avoid or skip this 'install security preferences' and install the fender fuse software?

  Thank you very much!!!

  http://osxdaily.com/2016/09/27/allow-apps-from-anywhere-MacOS-gatekeeper/

  But don't forget to read the entire article and note the cautions.

• Sansa Fuse and Foobar2000

  New owner of Sansa Fuse.

  I can drag / drop flac audio to my hard drive using Windows Explorer. But I can't drag / drop from Foobar 2000 where I organized my albums and playlists? Is it possible to do?

  < i've="" also="" got="" a="" mirror="" library="" using="" a-tunes.="" cannot="" drag="" drop="" from="" there="" either.="">

  Thanks in advance.

  Sansa is a V1, with the latest Firmware updates and uses a Micro SDHC 8 GB. Sounds good and works fine otherwise.

  Sorry... you need the plugin 'sendtodevice' of http://fb2k.org/show.php?id=263

  I thought that this was from the beginning, or maybe a box on setup of foobar.

• [SPA3102] SIP recording every hour with the 401 error and directly 12 OK

  Location: INET-ADSL modem in bridge mode-SPA3102.
  Problem: not really, everything seems to work, can dial in and out.
  But...
  Because I'm curious, I have a logserver of installation and checked what happened every hour of registration.

  What I see in the syslog hourly the 3102 made re - enroll by the SIP provider, but first I think 401 Unauthorized een 12 error and measured, I see an OK message.

  Seems weird to me.

  The same thing happens when I compose, firstly a 401 that OK.

  Can someone explain why the first attempt gives an error and how to avoid this?

  Some details of syslog:

  I replaced a text in the syslog:

  x.x.x.x is real My outside IP address.
  yyyyyyyyy = my local phone number including the area code, such as 31201234567, 31 = NL, 20 = codeZone for Amsterdam
  username = username by my SIP provider

  message 1:
  REGISTER SIP:SIP.poivy.com SIP/2.0
  Via: SIP/2.0/UDP x.x.x.x:5060; direction = z9hG4bK-2283ef7b
  From: + 31yyyyyyyyy ; tag = c85fff819484d288o0
  To: + 31yyyyyyyyy
  Call ID: [email protected]

  CSeq: 6104 REGISTRY
  Max-Forwards: 70
  Authorization: Digest username = "username", realm = "sip.poivy.com", nonce = "1663445546", uri = "sip:sip.poivy.com", algorithm = MD5 response = "c8c5b94c384559bb490b59b72be1c674"
  Contact: + 31yyyyyyyyy ; expires = 3600
  User-Agent: Linksys/SPA3102-3.3.6(GW)
  Content-Length: 0
  Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFICATION OPTIONS, see
  Support: x-sipura

  Message 2:
  SIP/2.0 401 Unauthorized
  Via: SIP/2.0/UDP x.x.x.x:5060; direction = z9hG4bK-2283ef7b
  From: + 31yyyyyyyyy ; tag = c85fff819484d288o0
  To: + 31yyyyyyyyy
  Contact: sip:x.x.x.x:5060
  Call ID: [email protected]
  CSeq: 6104 REGISTRY
  Server: (very nice Sip Registrar/Proxy Server)
  Allow: ACK, BYE, CANCEL, INVITE, REGISTER, OPTIONS, INFO, MESSAGE
  WWW-Authenticate: Digest realm = "sip.poivy.com", nonce = "1667015687", algorithm = MD5
  Content-Length: 0

  Message 3:
  REGISTER SIP:SIP.poivy.com SIP/2.0
  Via: SIP/2.0/UDP x.x.x.x:5060; direction = z9hG4bK-4d7052c
  From: + 31yyyyyyyyy ; tag = c85fff819484d288o0
  To: + 31yyyyyyyyy
  Call ID: [email protected]

  CSeq: 6105 REGISTRY
  Max-Forwards: 70
  Authorization: Digest username = "username", realm = "sip.poivy.com", nonce = "1667015687", uri = "sip:sip.poivy.com", algorithm = MD5 response = "46f2176652c0ad8d27f8d3ad1cf72c24"
  Contact: + 31yyyyyyyyy ; expires = 3600
  User-Agent: Linksys/SPA3102-3.3.6(GW)
  Content-Length: 0
  Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFICATION OPTIONS, see
  Support: x-sipura

  Message 4:
  SIP/2.0 200 Ok
  Via: SIP/2.0/UDP x.x.x.x:5060; direction = z9hG4bK-4d7052c
  From: + 31yyyyyyyyy ; tag = c85fff819484d288o0
  To: + 31yyyyyyyyy
  Contact: + 31yyyyyyyyy ; expires = 3600
  Call ID: [email protected]

  CSeq: 6105 REGISTRY
  Server: (very nice Sip Registrar/Proxy Server)
  Allow: ACK, BYE, CANCEL, INVITE, REGISTER, OPTIONS, INFO, MESSAGE
  Content-Length: 0

  @hw: thank you for your tip and your right on the spot!

  Never, ever, thought of this way of "logging" in a system and use delberatley an error response. With your tip, I thought that allows to read the RFC and found RFC 3665. This RFC describes the Protocol SIP basic call flow. And there he was, almost at the beginning of the real story on page 5! The protocol uses a command register which gives a message of 401 error back just to be sure to avoid security problems "man in the middle" (if I understand correctly). He present a challenge and you the answer to a totalizer new order including your answer on the challenge. Which will lead to an OK return the message.

  To resume: nothing weird, it is as expected. My curiosity is frankly satisfied. Another day with what I've learned something. Thank you.

• Flash player / CC, Animate.Trying to download fuse and how do the facial expression

  Hello and good afternoon, according to the part of the world that you live in the moment that you have received this message. Sow with that being said, you can very well see that I have several questions I need an answer, so any help would be greatly appreciated without having to change the forums and all this me, sow, hopefully I can get some answers here.

  Well, I'm on Mixamo and I came up with my own characters and so on, however, one of the issues that I have is, how do I get the facial expression to work with my characters. And before you tell me that I need to use fuses, I already read this information on it and I was wondering is there another program that I can use instead of fuse for my facial expression character, such as lip movement, eye movements, etc.

  And secondly, how do I get characters transferred in another program so that I can download it in one as a movie for an example? Is there like some embedded code or something I should use?

  Because I checked with Dreamweaver, which is not a lot of help and Animate is substantially the same as Dreamweaver, only another concept I's fuse, as I said, any help will be greatly appreciated especially if I don't have to go to another forum to say the same thing again?

  Best regards;

  Johnny

  Preran, here's the thing and what I discovered with these forums is that, everyone says a person with the question (s) and tell them that their in the wrong forum, instead of helping the person with the question of. Sow with that being said, what I'm trying to do is, I try to cover all of my bases.

  But to answer your question, Yes, my problem has been resolved.

  Johnny

• Bug report: save changes to geometry on Mac is broken (.) Fuse and create the preset of the agenda)

  As I mentioned previously, save changes to the geometry in a file .fuse on Mac did not work for hair and beard with a Brute and MaleFit of mounting configurations.

  Create predefined element and save the item selected in the form of preset are also similarly broken when you try to save changes to the geometry.

  Any chance your engineers can provide an ETA on a fix for this as not being is not in a position to save his work is a very big problem?

  Mac OSX 10.10.5, fuse CC Preview

  As a work-around, I was hoping I could use 'Save selected item as new preset catalogue' (star icon) or create predefined element (menu).  Nope it's broken as well.

  No need to post pictures since you can test it in 30 seconds approximately:

  1. Choose default values of the Assembly MaleFit

  2. Choose hair (braid, step back... "I don't think it's important), change the geometry, 'Save as a preset point them' (the star icon) or 'Create predefined item' in the menu.

  3. Notes the thumbnail to your newly named item does not show changes.  Choose your preset mods and newly appointed geometry are lost and were not saved.

  4. save modded point character for. FUSE file. Reload.  All mods geometry are lost.

  Repeat for the gloves.

  Thank you

  Allan

  Able to reproduce on the Brute!  Has made a few turns and looks like for example, much cannot be edited/saved on the Brute, but can be has made male.

  I have connected this bug for fixing!

• Fuse and Podcasts

  I read where WMA audio books work best on the fuse when played podcast. In my Windows Media Player11 Sansa Fuse section, I'm not able to change the podcast genre, because it does not appear as an option. Podcasts appear on the player itself, but I can't find anything on the drive to change the kind of podcast. Any suggestions on this.

  Problem solved. My digital audio files begins again where I turn it off then my problem is solved.

• Quality of fuse to Mixamo (and then to the unit)

  I have noticed a dip in the quality of the model when going from fuse to Mixamo, and then it dropped quality rest when I put the model in the unit, is there something obvious that I'm missing? Thanks in advance for any help

  HM.  The short answer is that it is a difficult question... how 3D graphics work is basically you create information in the geometry, material and texture maps (diffuse, specular, normal, etc) and these maps provide information the converter.  However, each rendering engine has its own rules for the use of this information.  A specular in unity card is not the same as a specular in Unreal Engine 4 (roughness) card in Photoshop or on the Mixamo website.  So 3D graphics often look quite different when she is caught between the environments.  For details!

  Mixamo.com:  It is a web-based interactive WebGL 3D viewer.  It's not nearly as powerful as the fuse and does not look as nice, I'm afraid.  We are working on some adjustments, so it seems at least "close" to fuse, but at least for now, it's more than a quick overview for you to choose the animations.  Once you download the character and files, you can keep your 3D software and set up and he goes back to the much nicer looking.

  Unit:  It is more difficult to answer some.  First, the unit has a configuration of different texture Mixamo/fuse/Photoshop to use by default.  For unit 5-compatible materials, you'll want to go to fuse and use the file > export option Textures to export a new series of Unit 5 specific textures.  Next, you need to import those and configure shaders to use the new standard shader of Unit 5.  You may need to duplicate the material of the body and make a transparent material separated for the mesh of eyelashes.  Exactly what you need to do is based on the style and look that you are going to your game.  You don't have to use the standard shaders, you could plug in a toon shader cards, for example.

• Problems VeriStand 2011 RT and SCXI-1540

  Good afternoon

  As in the topic, we have problems with our card module SCXI-1540 that we use to acquire a mixed selection of RVDT and resolvers.

  Specifically, we have our facility on Veristand 2011 on a target of RT who has a device custom control map SCXI chassis PXI-1050 and the NI PXI-6221 card, everything is fine but every now and then the map 1540 suddenly start showing a rolling measure of angle for resolution programs.

  By checking with an oscilloscope, resolvers entries are good, but we notice that when the event occurs, the excitement somehow pass set 5 kHz to 10 kHz and even by the cancellation of the deployment and redeploy the project and verify that the property node DAQmx channel used to set the frequency of excitation is the correct setting of 5 kHz and does not return an error There is no way to get the channel back to 5 kHz, and it remains stuck at 10 kHz. The only way to be able to control the frequency of excitation again is through a power cycle of the RT/chassis.

  We checked also by adding debug code in the custom feature event is the channel of sin or cos channel starts showing a rolling measure voltage so our measure of angle begins to roll too.

  So far, this behaviour seems to have manifested only with programs of resolution that we mainly tested those and synchronize us excitement between a sin / cos pair.

  Please notify

  I just noticed that I never gave a solution for this.

  The problem was current flyback to another causing system glitches of EMI on the lines of resolvers somehow mess with map of 1540, which essentially stopped decoding of the resoulvers of entry correctly, I added a Reset custom device close the file and that fixed the not being able to get out of the excitement of 10 Khz on the redeployment. However the final fix was adding flyback diodes to the tokill power system high seeds. So beware of your configuration as module SCXI-1540 cards seems to be sensitive to such events.

• Laser jet Pro 401 DW: LASER JET PRO 401dw

  I was told that I need to replace the fuser in my Laser Jet Pro 401dw.

  Where can I purchase a fuser unit, it is how much and can install it myself?

  You can get from the HP store or even eBay however, if you have never taken part a printer before, it is not a level 1 Tech job.

  A qualified technician taking part on a daily basis in my tech Department (we are rebuilding for hot filing program) said that it needs about 30 minutes to "do things."

  I know that HP may not like that, but Highway 401 is considered by many as a "disposable" printer  Use you it to pages 150 k or so and buy a new.  Why?  Because they were only about US $170 wholesale.  Retail trade varies.  (I don't know if you are in the United States or another somehwere)

  The new 402N is only US $200 retail.  So, do the math: at least $ 100 for a good game of fuser and roller.  If you can not do, then another $100 for a service tech call.  You are US $200 and it's technology is qualified and not just a guy who knows a little something about printers and fixed the computer neighbours for a few dollars.  Add a dose of agrivation, and you are well on the US $200.

• cFP-PWM-520 drops out after 30 seconds. Power would be bad or controller?

  PSC 2110 with PWM - 520 5 s and 3 modules of CFP HAVE completely stopped working.  If I disconnect all the output channels and manually put them in MAX.  However, now I can't even by car out of a PWM, that after providing the voltage for about 30 seconds, all of the channels on this PWM switched off.  Cannot determine if this is the problem with the controller, or perhaps electric power is a failure.  Power supply shows a constant 24 volt.  I can reset the controller and then all 8 channels are specified voltage output for about 30 seconds, then remove from pan.  This system is used for lighting low voltage on a display of aircraft cockpit.  Any help appreciated.

  Hello Patricia:

  Updated the current drivers, and question still remained.  I have reformatted the memory on the controller of the CFP, reloaded the drivers and then started with the dip switch 6 on so no vi charge and everything behaves as it should now.  I believe that we can have a power failure or the power peak which occurred near this show, not sure.  But we are on the right track now.  Thanks for your help and your advice.

  Brad

• Printer HP Laserjet M601: HP M601 Fuser error 50.72.11

  How to clear fuser error 50.72.11?  I replaced the fuse and the rolders with a new maintenance kit and still receive the error message.  Please help.

  # Disconnect the power source...

  # chk for damage to the fusion & connectors LVPS unit

  # Refix fuser unit, ensure that this merger should in place.

  # Connect direcr raw power, if the power cable connected through protector of serge or UPS.

  # If possible to change the location.

  # Wait inactive 20mts.

  # Connect the power supply & chk...

  In my view, no problem with the fuser unit, if problrm presists change LVP (Lowpower supply)...

  Good luck...

  

• HP 3550: 12.20.00 and 13.02.00 HP 3550 failed

  Hello, who can help me

  I have a HP3550 and it has a strange fault. After the failure of the reset! 3.20 13.02 0r IT prints a page and that page will to halfway through the fuser and then the machine stops and gives one of the above mentioned failure codes.

  I printed a demopicture and that was good. I also did the paper path test but it also made a stop at Midway.

  What can I do? I don't know anything about the sensor codes, but these are the numbers: 0100000010100.

  I cleaned the entire machine with air (compressed) and took what I could get out.

  Who knows what I can do?

  With the best wishes,

  Paul Holland

  @Paulolk

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are not familiar with messaging private forum please click here to learn more.

  Thank you
  Omar

• Songs to jump on my new fuse

  I just bought a FUSE and all the songs that I downloaded are jumping at any given time.   What could be the cause of this?

  After I sent the message, I decided to browse old messages.   I found some that says jump occurs when the headphones are not completely... I double checked and was able to push a little more.   It seems to have contributed to the issue.      I am very new to an MP3 player, so don't even think of this problem.  Thanks for your ideas.