Chained monitoring Agents

Similar Questions

• Net monitor agent works does not in Foglight

  Hi all

  We use 5.6.4 foglight to monitor our environment. We have the Net monitor agent for the availability of the server configured and added a few set of servers in the properties of the agent, but we do not get alerts if the server goes down even after activation of the rule "unavailability of the aircraft".

  Please let us know if there anything we missed and help us solve this problem.

  Thanks & best regards,

  Guenoun

  Do you see anything in the log file?

  The last time I saw a similar problem was a looooooong time ago and it was fixed in 5.2.1

  https://support.software.Dell.com/Foglight/KB/42692

  See also if the AIDS article

  https://support.software.Dell.com/Foglight/KB/47272

  Golan

• PS_App could not be found in foglight monitor agent areas

  Hi all

  We have configured the monitor agent PS App for Peoplesoft-Windows machine monitoring. We gave the home path and the path of smoking in the properties of the Agent and the cartridge is 5.6.2.1 we use.

  the agent is unable to find the areas for the host, especially for Windows machines.

  Please suggest some troubleshooting steps to resolve this problem.

  Thank you best regards &,.

  Guenoun

  Gokuinath, I recommend put you foglight agent manager that is associated with the agent of PeopleSoft application in debug mode. With the debug mode, we can see in file of newspaper on what additional information the agent.

  The command below will activate the debug mode without having to restart a foglight agent manager:

  fglam.exe - set-global-debug-level 1

  You must disable and re-enable the peoplesoft application agent that you have worked.

  To do additional debugging, we see the files of fglam newspapers and the foglight peoplesoft agent logs

  David Mendoza

  Foglight Consultant

• Tivoli monitoring agent status is OFFLINE

  I installed Tivoli Monitoring tool in my ESX Server. Now-a-days, it generates an error message as "Tivoli monitoring agent status is equal to OFFLINE. I have a few questions about this:

  1. where (path), namely the installed files?

  2. how to check if the agent is running or not?

  3. how to restart the agent service?

  4. how to avoid such problems in the future?

  5. are there only orders related to this?

  Thank you

  Ganesh

  Hi Ganesh,

  Take a look at the documentation for the agent, but there should be a command like "/ opt/IBM/ITM/bin/itmcmd agent" to manage.

  It may be useful

  Concerning

  Franck

• How the servers monitor Foglihgt Agent eat? data collection?

  Hello

  HWO to monitor Agents of Foglihgt, when we checked the agent in dahsboard green Agent statsu is displayed, but some time it collects not data.

  is this a way to monitor Agents (FGLAM) are the data collection or not? If not, we send an email to us.

  Check first for the agents to be deleted if they are present in Administration > Agents > Agent status

  If they use the buttons in this dashboard to disable, then delete them.

  Then go to: Management Server > servers > Data Management: Manager Agent > instance to find your "null" and possibly other officers, who have not been removed by the above action.

  Delete them usung icon red removing in the column to remove.

  If you do not feel comfortable on this subject, I strongly advice you open a support case.

  Best regards, Bart

• XPS8910 with Dell UltraSharp 24 monitor - configuration double monitor U2414H

  I just got my XPS8910 and can not know how to set up two monitors, the only cable I need to connect the computer to a monitor's HDMI with adapter supplied with the computer. When I use the cable supplied with the monitor daisy chain monitors I get the message that there is no signal coming to the second monitor. I have allowed DisplayPort1.2. It's frustrating? I need additional cables, or is it a specific port option? Any help is appreciated.

  RL

  Hi rozmerlin,

  Please repost this in the forum Office help.

  http://en.community.Dell.com/support-forums/desktop/

• SSL monitoring

  Hey guys,.

  I'm looking for an agent this SSL certificate expiration monitoring? Someone at - it something already done they can share?

  I wonder if this is possible only with openssl Verify order

  If I read this right http://www.madboa.com/geek/openssl/#verify-standard

  If it seems that the command returns ok if all is well and a mistake for a certificate expired.

  The result can be sent to Foglight but it is probably possible also with the execution of the command and send the results to a log file and then just have logfilter monitoring agent log file and send the notification on errors.

  Golan

  PS I also see this site with scripts that may be able to give the number of days and then just sent this info to Foglight with a script agent http://www.glenscott.net/2011/12/09/checking-ssl-certificate-expiry-date-and-issuer-an-openssl-wrapper-in-bash/

• Silent monitoring of the IPCC Bureau

  Hello

  I'm having the problem that when a supervisor agent opened a monitoring office, monitored agent receives a pop-up alert message and makes the process not so "quiet".

  Is it possible to disable this?

  Kind regards

  Here are the steps to turn off the alert POP when the supervisor clicks of silent monitoring.

  1. open the Cisco Office administrator.

  2 expand location then your 'server name' LCC.

  3. Select "Configuration of the office.

  4. from the toolbar above, select "oversight."

  5 uncheck "notify oversight."

• How to monitor oc4j 9.0.3/4 & JDK 1.3 using the JMX cartridge.

  Hello world!

  I want to follow the oc4j 9.0.4 on windows server 2003 using JMX. But the jdk 1.3 does not support the connection of jmx.

  What could I do?

  Thank you!

  As you note, JDK 1.3 does not JMX support, so you can use the JMX monitoring agent.

  Similarly, JDK 1.3 is too old to be supported by the Java agent.

  Older versions of Java JDK 1.3 are "not updated with the latest security patches and are not recommended for production use." http://www.Oracle.com/technetwork/Java/javasebusiness/downloads/Java-archive-downloads-javase13-419413.html

  You can monitor older versions of OC4J using:

  -Agent infrastructure for monitoring the use of process and OC4J resources on the host

  -LogFilter officer monitor the application log file

  -End user agents to control the specific transactions synthetically or any site web sessions passively

  Kind regards

  Brian Wheeldon

• Clone 10.2.0.5 agent issues

  Hello
  
  I followed the instructions of cloning manually agent on Linux hosts. Someone managed this? The error messages, it seems that cloning is not more, but maybe I'm missing something. Here's what I do.
  
  1. directory agent on a properly installed place tgz
  2. the scp of the agentless host, uncompress. All files kept acls, possessor and suid bits
  3 cd dir Yes/bin and command (per the oem documentation):
  . / runInstaller - clone - forceClone ORACLE_HOME_NAME ORACLE_HOME = / agent10gdir = agent10g5 - noconfig-silencer
  
  Output:
  
  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2010-05-10_12-30-08 PM. Please wait... [oem@host bin] $ Oracle Universal Installer, Production of the Version 10.2.0.5.0
  Copyright (C) 1999, 2009, Oracle. All rights reserved.
  
  Command line arguments '-clone ',' - forceClone' are not valid options. Type 'runInstaller - help' to the command line for instructions on the use of the appropriate command line.
  GRAVE: command line arguments '-clone ',' - forceClone' are not valid options. Type 'runInstaller - help' to the command line for instructions on the use of the appropriate command line.
  
  4. run the command:
  . / runInstaller-help
  
  Output:
  continue to launch Oracle Universal Installer from/tmp/OraInstall2010-05-10_12-31-11 PM. Please wait... [oem@host bin] $ Oracle Universal Installer, Production of the Version 10.2.0.5.0
  Copyright (C) 1999, 2009, Oracle. All rights reserved.
  
  Use:
  runInstaller [-options] [(<CommandLineVariable=Value>) *]
  
  Where options include:
  -oracle.crs < version crs > clusterware
  Version of installed Cluster ready services.
  
  -crsLocation < Path >
  Used only for cluster installation, specifies the path to the original location of crs. By specifying this overrides obtained from the central stock CRS.
  
  -invPtrLoc < full path of the oraInst.loc >
  UNIX only. To point to a different location of the inventory. The file orainst.loc contains:
  inventory_loc = < location of central inventory >
  inst_group = <>
  
  -jreLoc < location >
  Path where the Java runtime environment is installed. YES cannot run without it.
  
  logLevel - < level >
  To filter log messages that have a level of less than < level > priority. Valid options are: severe, warning, info, config, fine, finer, finest, basic, general, detailed, trace. Use of basic, General and detailed, trace is discouraged.
  
  -paramFile < file location >
  Specify the location of the oraparam.ini file that will be used by YES.
  
  -responsefile < Path >
  Specifies the response file and the path to use.
  
  -sourceLoc < location of the products.xml file >
  To specify the location of shiphome.
  
  -addLangs
  To add new languages to an already installed product.
  
  -addNode
  To add nodes to the installation.
  
  -attachHome
  To fix the homes in inventory YES.
  
  -cfs
  Indicates that the specified Oracle home is the (shared) cluster file system. This is required when '-local "is specified so that Oracle Universal install can save the House properly in the inventory.
  
  -clone
  To make a copy of the Oracle Home corresponds to its current environment.
  
  -debug
  To get YES debugging information.
  
  -Uninstall
  To uninstall operations.
  
  -detachHome
  To detach the YES inventory homes without removing the inventory within the Oracle home directory.
  
  -enableRollingUpgrade
  Used in the cluster environment, to allow the upgrade of a product on a subset of the nodes (on which the product has been installed).
  
  -executeSysPrereqs
  Run the system pre-checks and exit.
  
  -force
  Allowing installation in silent mode in a directory not empty.
  
  
  5. run the command:
  . / runInstaller - clone - force ORACLE_HOME = / agent10gdir ORACLE_HOME_NAME = agent10g5 - noconfig-silencer
  From Oracle Universal Installer...
  
  No verification requirements found in oraparam.ini, no prerequisite system controls will be carried out.
  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2010-05-10_12-32-50 PM. Please wait... [oem@host bin] $ Oracle Universal Installer, Production of the Version 10.2.0.5.0
  Copyright (C) 1999, 2009, Oracle. All rights reserved.
  
  Command line arguments '-clone ',' - force' are not valid options. Type 'runInstaller - help' to the command line for instructions on the use of the appropriate command line.
  GRAVE: command line arguments '-clone ',' - force' are not valid options. Type 'runInstaller - help' to the command line for instructions on the use of the appropriate command line.
  
  6 get frustrated
  
  7. run the command:
  . / runInstaller ORACLE_HOME_NAME ORACLE_HOME = / agent10gdir = agent10g5 - noconfig-silent - clone - force
  From Oracle Universal Installer...
  
  No verification requirements found in oraparam.ini, no prerequisite system controls will be carried out.
  Preparations for the launch of Oracle Universal Installer from/tmp/OraInstall2010-05-10_12-34-31 PM. Please wait... [oem@host bin] $ Oracle Universal Installer, Production of the Version 10.2.0.5.0
  Copyright (C) 1999, 2009, Oracle. All rights reserved.
  
  You can find a log of this session to install to:
  /Home/OEM/oraInventory/logs/cloneActions2010-05-10_12-34-31PM.log
  
  [oem@host bin] $ cat /home/oem/oraInventory/logs/cloneActions2010-05-10_12-34-31PM.log
  NEWS: Environment Variables:
  
  INFO: ORACLE_HOME = /agent10gdir
  
  INFO: PATH = / agent10gdir/bin: / usr/kerberos/bin: / usr/local/bin: / bin: / usr/bin: / bin/oem/home
  
  INFO: CLASSPATH =
  
  INFO: Username:oem
  
  INFO: Setting variable 'ORACLE_HOME' ' / agent10gdir'. Has received the value of the command line.
  
  INFO: Definition of variable 'ORACLE_HOME_NAME' to 'agent10g5 '. Has received the value of the command line.
  
  INFO: Definition of variable 'PREREQ_CONFIG_LOCATION' ". The value of variable association received.
  
  INFO: Definition of variable 'FROM_LOCATION' ' / agent10gdir/inventory/ContentsXML/comps.xml'. The value from a block of code.
  
  INFO: config-context initialized
  
  NEWS: Get the location of the home directory of the user default inventory.
  
  
  INFO: Setting default inventory location: ' / home/oem/oraInventory.
  
  INFO: Inventory install them during initialization
  
  INFO: setting up install the inventory
  
  INFO: Install box control created with access level 1
  
  INFO: Cannot read the list of inventory homes.
  
  INFO: Oracle Universal Installer version is 10.2.0.5.0
  
  INFO: Definition of variable 'CLUSTER_NODES' ". The value from a block of code.
  INFO: Definition of variable 'REMOTE_NODES' ". The value from a block of code.
  INFO: The following components do not support the cloning:
  INFO: 10.2.0.5.0 Oracle Management Agent
  
  
  
  Thus, he worked for anyone? What operating system/version where do you use? Thank you!
  
  Jason Harris

  Hi Jason,

  The agent software? You mean the original zipped agent? It comes from a non - server WHO. But it's not much different with an agent of a CMS server except add some extras to the runinstaller command (see note 579156.1 steps to clone chained Management Agent).
  I don't see much in this step that might help you, sorry.

  RDP has nothing to do with Oracle. It is an acronym for HP Insight Rapid Deployment Pack and is just a way to install with the basic software (os) servers, configure and install additional software in an automated way. We used to install the servers and install and configure the Oracle Agent on a clients site.

  If you do so already create a new zip from a different source (if available) and give it a try again. Maybe something was not right in the source directory of the agent.

  Eric

• support for version DisplayPort for spectrum XT 15 t-4000

  I would like to know if the graphic chipset in my spectrum XT 15 t-4000 supports the displayport 1.2 version. I would like two monitors compatible 1.2 DP to chain together, but I would like to know before I was throwing money to the monitors. I can't find any docs telling me to be.

  Thank you

  -Ko

  Hi all

  After doing some digging around, pretty of course fell in love the chip in the spectrum xt 15 t-4000 does not support chaining monitor displayport 1.2.

  Going to try one of these StarTech USB 3 displayport adapters and see if it will do:

  http://www.Amazon.com/STARTech-com-DisplayPort-external-adapter-USB32DPPRO/DP/B008CXFM64

  If all goes well, that will work.

  Just to be complete, love at first sight 2 chipsets include 1.2 support. So, anyone buying a new laptop with this new chipset profit not only from 20 GB throughput, but will be able to monitors able Garland dp 1.2, such as the dell u3014.

• New on Foglight 5.6.10 - process

  With this release of Foglight is still an Agent application process, I would continue to monitor the application process, we followed the version 5.5.8 we monitor our servers remotely with this new version and have no problem tracking of BONE with the Infrustructure cartridge, I can't find any documentation on the process of the Application.

  Hello

  A bone point settlement stull you have X (default = 5 but configurable) control TOP consumer for memory/cpu appear in the dashboard host and if your app is a high consumer see in host dashboards.

  Utlilty agents are in transition, we already have the new webmonitor and apache, agents monitoring and others are in preparation. In the meantime you can still continue specific process with appmonitor monitoring agent, simply install the OS (legacy) cartridge on your FMS of surveillance, put a fglam on the target computer and deploy the agent appmonitor, just as you did with 5.5.8

  Hope this helps,

  Golan

• Manage rules

  I just put a new Web Monitoring Agent on our servers, and I alert us if she sees that the site is down.  This has been working great, but we have been has recently informed the daily interview is done.  What I would do, to avoid the setting up of a blackout window, would be to set the interval for the agent to run and fail twice before send us an alert.  Currently, the agent runs every 5 minutes and if it fails once so I don't want to be alerted, but if it fails twice, then I am sure something is wrong.  I'm sure that there is a way to do it, but I'm having a hard time finding the instructions on this site and I'm sure that my lack of knowledge with groovy scripts is not help.  So, if anyone can point me in the right direction to add an exception or an increase to my alert script I would be your debt.

  Thank you

  Chris

  Chris,

  Under rule management, look for the tab called behavior because it provides controls you are looking for.

  David Mendoza

• That must make the password stored in the JAGENT portfolio, and what JAVA_HOME should I use for the pw_agent_util.sh command?

  I configure the GoldenGate Plugin for OEM. There is a step to create the portfolio. The documentation is not clear on the role of the provided password. If I run the JAGENT as user oracle, it must match the password for the oracle user, or is this separate password? Also, should I use the jdk to OEM agent to set JAVA_HOME?

  ./pw_agent_util.sh - jagentonly

  Pat,

  Morning.  Good to see that someone is working on the use of the plug-in for GoldenGate in OEM12c.

  If you use the plugin 12.1.0.2, you will be much better with the preparation of reports on the processes of GoldenGate.  In order to get the 12.1.0.2 plugin to work, the 12.1.3.0 JAgent is necessary and can be downloaded in the distribution of the Oracle GoldenGate monitor (Agent Monitor configuration Oracle #GoldenGate |) DBASolved).  If you use the old plug-in 12.1.0.1, the JAgent is integrated with the GoldenGate Software (Oracle GoldenGAte(11.2.1.0.1 and later) and Oracle Enterprise Manager 12 c |) DBASolved).  I recommend you take the new plug-in!

  Now to the address that ask you the password. The password is stored in the portfolio under the House of GoldenGate ($OGG_HOME/dirwlt) and is used directly for the JAgent to connect to the EMAgent and connect with OEM.  The password associated with user name is configured in the $JAGENT_HOME (different depending on version, look for the Config.properties).  Then in OEM, the user name defined in the Config.properties and the password in the portfolio must be provided before OEM GoldenGate targets will come.

  The $JAVA_HOME parameter is dependent on the version of JAgent you want to run.  The JAgent 12.1.3.0 to using the JDK 1.7 or higher.  The JAgent shipped using JDK 1.6.

  Thank you

  Bobby

• Get Foglight - App_Monitor, CPU usage of the process of

  All,

  What is the path in the template to write a rule for the CPU usage of a process which is monitored with the App_Monitor?

  For a while now with no luck real digging into the model.

  Sir I wat a rule if a process has less de.1% CPU, triggers a warning.

  I think that the subject of topology is AppMonitor_ProcessTotals

  Look at the rule called "Process_Availability", you can probably copy and reuse

  

  If you look at data from the server, it will be under Foglight4Model > IPMap > (host name) > Agents > (App monitor agent) > Tables > ProcessTotals

  Golan