Change my hard drive for an SSD. Re-install windows 7?

Similar Questions

• Reformat Windows 7 hard drive for the next clean install Windows ISO 10

  This is in anticipation of the next clean install of Windows 10 ISO.

  It is understood that I need to move from Win 7 to win 10 first, before clean install. (Select MS verify the legitimacy)

  It is understood that I need to reformat the hard drive before a clean install.

  It is also understood that the "recovery disk" can reformat the hard disk.

  ===================================================

  One of my computers in Win 7 I would successfully created the "recovery discs. (Wonderful)

  --------------------

  Problem:  My other Windows 7 (Vista upgrade) will not let me create the "recovery discs.

  When you do: start / run / recovery

  It allow me to create "backup and restore disks. (This is not the recovery disks that I need).

  ===========================

  Question: How do I reformat my another computer on Windows 7 (Vista upgrade)?

  Note: Two computers are different: the first is a HP, the other is a gateway.

  ("Partitions" of hard drives may be different.)

  I don't know: if I can use the recovery made the first computer disc to reformat my second hard drive?  If this isn't the case, I'll be in trouble, because I don't know how to reformat my second computer.

  You need to use the means to reinstall that you can upgrade Windows Vista Setup to format the drive.

  The other system recovery media is likely to not work, but you can always try, but have appropriate reinstall media just in case.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• HP Pavilion - 15z Beats: what I can exchange my hard drive for an SSD on my HP Pavilion - 15z Beats?

  Can I swap the hard drive for an SSD on my Pavillion - 15z Beats?

  Thank you

  Hello

  Yes you can. You can use 7mm or 9.5 mm SSD but please note: this will void the warranty.

  Kind regards.

• What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Original title: Windows 7 OEM System Builder

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Yes, you can reinstall Windows 7 OEM System Builder License on the new hard drive with the new processor.

  It will not be a problem in this case, since you don't "move" installation, you are doing a new installation. The less it will take is activation of the phone, as you change the hard drive:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• New hard drive for HP6930 - BSOD when installing the OS

  I recently bought a new hard drive for my HP6930 so I can switch between my work and home demands (they cannot reside on the same hardware).

  Both drives are Fujitsu SATA 160 GB.

  After swapping the drives and boot from CD to install the operating system - I get a BSOD, hardware failure - "the system was arrested to prevent damage...". "with a comment about the check of the hard drive.

  Can anyone provide insight into what I'm doing wrong?

  Thank you

  Dave

  You can integrate the drivers Sata (ICH9M-E/M SATA AHCI) and burn a new cd XP with nLite .

   

  Here is a guide showing how to integrate and here drivers Sata. 7-ZIP or Universal Extractor are good at unpacking the installer.

• What hard drive for t410s SSD?

  Hi guys

  I want to install a SSD HDD in my T410s: someone has done this before?

  (1) it will make faster?

  (2) what SSD will fit without problem?

  Tom

  Yes, it will be faster, but you need to look for 1.8-inch SSD, they are now quite rare and not cheap.

  Look for something like Intel X - 18 m.

  Also, you can remove the drive optical and put in an SSD to 2.5 inches in this box if you want to. This can be a cheaper and you will get no speed penalty, as the main hard drive and optical drive Bay use SATAII connection.

• HP Envy Touchsmart j122TX 15: cloning of HARD drive for an SSD and installation on HP Envy Touchsmart 15 j122TX

  I will replace an old 1 TB HHD by a new 1 TB SSD Samsung 850 EVO on my HP Envy 15 Touchsmart j122TX. I also have Acronis True Image 2015. How can I go on cloning of the HDD to the SSD and installing the SSD on my HP, implementation of the operating system in order to ensure a good performance? Please give me step by step instructions I'm inexperienced. Thank you for your support.

  You need a bootable media because you cannot clone Windows player while it is in use. If you start another source (bootable support) leaving the main hard drive passive and quiet, so it can be copied sector to the new clean disk. I explained you start from the Acronis Disk and when the interface is in place you select "utility" and one of them is 'clone disk '. This is how you use the bootable disc in the cloning process.

  As with the post before me you simply remove the MSSD. However, in this case the user would do a clean install. Cloning will be hover over the driver of storage for the SSD controller and will not have to load the RAID driver separately. The way you do it is much easier.  I would like to dissociate the WSSD since the main hard drive using Intel Rapid Storage (disable acceleration), remove the WSSD and start-up of the former hard drive without the WSSD in place one or two times before cloning.

• I CHANGED THE HARD DRIVE, THEN I TRY TO REINSTALL WINDOWS XP BUT I GOT ERROR MSG MSNMSGS.MS_ FILE CAN NOT BE FOUND THROUGH. ? I CLICKED RETRY. THEN HE DID THE SAME THING CUPLE TIME WITH SAME & ANOTHER ERROR MSG.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Do not install an operating system is usually caused by (in order of probability):

  1. you are trying to install with other devices connected to the computer. Unplug them before trying to make an installation.

  2. "" "" defective installation media. "" Check the CD/DVD installation for scratches, tasks. Try another machine.

  3. bad optical drive. Test with another CD/DVD bootable or Exchange for a well-known work.

  4. faulty RAM. Test with Memtest86 + www.memtest.org . You will download the .iso image file to create a bootable cd. Burn the file with the third party burning software *-as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM.

  * A good free choice ImgBurn comes from www.imgburn.com .

  5. bad hard drive. Test with a diagnostic utility downloaded from site of the disc mftr... You create a bootable CD with the files you download. Burn the file with a third-party burning software - image, not in the form of data. Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  6. other hardware components are faulty. MS - MVP - Elephant Boy computers - don't panic!

• How can I change my hard drives from IDE to AHCI in windows 7?

  Made me change in the BIOS but Windows 7 just gives the blue screen at startup.   Tried to boot from my Windows disk and run the Startup Repair.  Without success.   Windows could not do the repair.  Must return the BIOS IDE mode for readers.

  I have under5stand I have to AHCI to add any player to solid state.

  The material is as follows:

  Card mother Gigabyte GA-890GPA-UD3H, AMD Phenom II 965 6 GB DDR3 memory processor. Western Digital hard drive 1 TB, 1 TB hard drive SATA2 Baracuda SATA3.

  Appreciate any suggestions.

  See http://support.microsoft.com/kb/922976.

  The Msahci in Windows 7 driver is disabled if the initial installation was performed with the value native IDE BIOS. The Msahci driver must be enabled before changing the boot drive SATA/RAID mode.

• I changed my hard drive and would like to reinstall windows 7 ultimate.

  My don't on my Sony Vaio VGN-SZ670N hard drive died and I have no other choice in replaces it.  The new drive has no operating system, and I don't have a recovery CD.  I have my Microsoft for Vista 7 key information as well as my Office Professional 2007 but do not know where I can buy a cd of Vista Ultimate that will reinstall Vista ultimate on the new hard drive.  Any ideas will be appreciated.

  Thanks to you all.

  Ron

  Hello

  There is NO vista 7

  There is vista or windows 7 operating system

  they are different operating systems

  your question is confusing

  the header:

  "to reinstall windows 7."

  the body of the message;

  "Reinstall Vista ultimate.

  These are forums for more information of vista vista:

  http://eSupport.Sony.com/

  Contact sony and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  This article describes how to easily order service packs on CD, replace Microsoft software or hardware, and replace product manuals.

  http://support.Microsoft.com/kb/326246

  for questions of windows 7:

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Preparation of the hard drive for ESX 3.5 install

  I have downlaoded a trial version of ESX 3.5, burn a cd with the ISO file and tried to install it on my workstation intel.   The installation says that it cannot find a partition.

  I understand that ESX 3.5 runs under Red Hat linux. I need to install Red Hat Linux first? VMWare is recommended? I have fedora 9

  Essentially could someone indicate the steps needed to prepare the hard disk for installation?

  My workstation is configured as follows:

  1.8 G P4 with 1.5 GB Ram and 200 GB IDE hard drive.   I can install it on this system or do I dual CPU, & gt; 2 gig of Ram and a drive hard ide not?

  Can I migrate between ESXi and ESX 3.5 hosts?

  Thank you

  Dan

  Hello

  The installer ESX install basically 2 things. First, it installs the vmkernel and its Elements, and the second thing it installs is the RHEL3 based on GNU/Linux or the service console management appliance. The considered distinct elements and it will make more sense. ESX is NOT Linux. The kernel running on the hardware is the vmkernel. The vmkernel creates a virtual machine for GNU/Linux management machinery to run during the start-up phase of ESX. The vmkernel is an exclusive hypervisor. Also to be called Linux, the kernel must be blessed by Linus Torvaldis... If you really want the details about how ESX boots please refer to VMware ESX Server in the enterprise structure because it contains this information.

  If you can not start ESX and then very probably not have a RAID/SCSI/SATA/SAS controller supported in use. This controller must be on the HCLs already reported in the previous posts.

  Note that IDE is not supported in some way. Very few SATA controllers are supported. So if your "Workstation" uses the IDE or a RAID/SCSI/SATA/SAS controller not supported then your options for virtualization are limited to the use of VMware Server, WOrkstation or ESX from VMware Workstation.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• HARD drive not visible - how to install Windows XP on Satellite L300-11F

  I downloaded + "The Intel Matrix Storage Management Utility for the management of your local storage space, including RAID support, including drivers you will need to provide the installation manual to make the HARD disk available to the operating system OS installer." +

  But if I understand correctly this .exe file should be run from windows already. But I again Satellite-L300-11th without any operating system and drivers-CD in the box.

  What should I do to begin installing Windows?

  Hello

  You need the Configuration utility 32-bit Intel Matrix Storage Manager disk since this page from Intel:
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  You must boot from the CD of Win XP. Then, you must include the SATA driver using the F6 key. Note: you will need an external USB FDD drive to include the SATA drivers.

  If you t, to an external USB FDD drive to use nLite software to create a new XP CD and include the SATA drivers.

  See you soon

• New hard drive... Re-install Windows?

  Hello

  I own as a HP Pavilion dv6830us laptop w / Windows Vista Home Premium bought a few years ago.  The hard drive has failed recently.  I just bought a new hard drive.  How would I re - install the OS if the original hard drive is broken?

  Thank you!

  Hello

  You can order a set of replacement recovery disks using the link below and use them to reinstall Vista on the new HARD drive.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• replace the material (for example the hard drive for an ssd and RAM more) in a fancy 4-1010ed

  I just bought a fancy 4-1010.

  Friendly and quick, but I want to upgrade.

  I just want to add an ssd and some more RAM for it, but I can't open back cover without destroying it (I think)

  How to open the cover back so I can access the internal organs of this nice feature?

  Envyfrans

  Hello

  Please follow the steps-by-step of the following document:

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c03404932/c03404932.PDF

  Kind regards.

• How can I change the hard drive for installing software on windows store?

  I want my apps that I could download on windows store to save in g disk not in drive c How can I do?

  See if this will help

  http://www.askvg.com/how-to-change-Metro-apps-default-installation-location-in-Windows-8/