change of ACC to ADC

Similar Questions

• difference between 2 types of different plan account members

  Can you find the difference between the dimension members account source with as 2 different plan types. Among the type of plan has also 2 extra dimensions.

  You should be able to do so until one of the accounts is ALSO present in the other account stored in the type of plan. So probably Acc.member2
  can be affected to have a 'plan Source Type' plan 2, but also be selected to appear in the level 1 when you change the Acc.member2 account in the web planning application. Planning would allow the account to appear in plan 1 via an XREF on the definition of member account in Essbase).

  Then in plan 1 that you would create a third account that calculates the difference between the 2.

  You would be able to analyze the variance by the dimensions in plan 1 (i.e. D1, 2, 3, & 4: plan of these dimensions common to both types)

  Hope this helps

  Published by: Xansaman on November 25, 2010 16:26

• change AIFF to ACC or MPEG

  How can I convert AIFF to ACC or MPEG?

  Used to make all the time, but not for a long time. I would overlap with an air of mine that I recorded in GarageBand, and then somewhere in iTunes I'd like to find a window allowing me to change the format.

  Main reason for sending my songs by e-mail.

  With the help of iTunes 11.4 (18)

  Did iTunes down this feature? Hope not.

  12 iTunes for Mac: save a copy of a song in a new file format - http://support.apple.com/kb/PH19509 - make sure that you are not using the full screen - https://discussions.apple.com/thread/6777547

• How to change the resolution of the ADC

  Hello

  How can I change the resolution of the analog-to-digital converter on my NO-USB6211 from 16-bit to 12-bit?

  This should happen in Matlab. I use the interface of the Session accordingly.

  I found the solution:
  Past the range of ADC - 10 V - 10 V to -.0,2 V - 0.2 V

• How do I change XP password administrator of ACC

  do not have a backup drive, and forgotten password

  I'm sorry. I'm afraid that Microsoft doesn't support cracking of passwords.

  Please read for more information: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/keeping-passwords-secure-microsoft-policy-on/39f56ef0-5d68-41ad-9daa-6e6019c25d37

• MBP has changed to new iMac - the problem persists

  Hello ladies and gentlemen!

  I can't believe I'm still having the same problem after a water landing forced my MBP mid-2012 and invest a lot of money in the new iMac. Now I'm sure this is the problem of the El Capitan, not the hardware. Especially after the last update of the system.

  Everything was going fine until last week when my iMac suddenly started to have some kind of hiccups - mouse ceased to answer at any time (100% battery), pages began to load really slow and sometimes only has not at all and Adobe apps began to plant without any particular reason. Nothing has changed and I haven't done anything unusual when it was absolutely new and running like a beast.

  The thing that is interesting to me is the use of the CPU and RAM. (It a few months ago when I had the problem with MBP), I noticed that when you open a page in Safari (any type of page) and let it stay there for a few days it starts to use a LOT of material in the background, even if you have completely forgotten this page and did not open it / refresh it for a long time - screenshots below. Why the hell is happening? I do not understand why Safari does need juice both by the love of God because no matter how much it will be, he will use it. I thought that changing from 8GB to 32GB it will solve the problem. Boy, I was wrong...

  EtreCheck version: 2.9.13 (267)

  Report generated 2016-07-07 14:44:42

  Download EtreCheck from https://etrecheck.com

  Time 01:28

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  iMac (retina 5K, 27 inches, end of 2015)

  [Data sheet] - [User Guide] - [warranty & Service]

  iMac - model: iMac17, 1

  1 4 GHz Intel Core i7 CPU: 4 strands

  32 GB of expandable RAM - [Instructions]

  BANK 0/DIMM0

  8 GB DDR3-1867 MHz ok

  0/DIMM1 BANK

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM0

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM1

  8 GB DDR3-1867 MHz ok

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n/ac

  Video information: ⓘ

  AMD Radeon R9 M395X - VRAM: 4096 MB

  iMac 5120 x 2880

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - time since started: about one day

  Disc information: ⓘ

  APPLE SSD SM0512G Disk0: (500,28 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 499,06 (Go 181,15 free)

  Storage of carrots: disk0s2 499.42 GB Online

  USB information: ⓘ

  Broadcom Corp. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Library/Extensions

  com [loading]. Cycling74.driver.Soundflower (2.0b2 - SDK 10.10 - 2016-06-03) [Support]

  / System/Library/Extensions

  TL.UDs.netusb.controller [no charge] (1.59-2016-06-03) [Support]

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 150 tasks Apple

  [operation] 80 tasks Apple

  [killed]    A spot of Apple

  one killed process lack of RAM

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 147 tasks Apple

  [operation] 95 tasks Apple

  [killed]    A spot of Apple

  one killed process lack of RAM

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-07-06) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-17) [Support]

  [operation] com.adobe.AdobeCreativeCloud.plist (2016-04-12) [Support]

  com.TeamViewer.TeamViewer.plist [no charge] (2016-03-20) [Support]

  com.TeamViewer.teamviewer_desktop.plist [no charge] (2016-03-20) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-05-17) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-17) [Support]

  [operation] com.adobe.adobeupdatedaemon.plist (2016-06-10) [Support]

  [loading] com.adobe.agsservice.plist (2016-04-12) [Support]

  [loading] com.adobe.fpsaud.plist (2016-05-10) [Support]

  [loading] com.teamviewer.Helper.plist (2016-02-01) [Support]

  com.TeamViewer.teamviewer_service.plist [no charge] (2016-03-20) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2016-02-08) [Support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist

  [loading] com.google.keystone.agent.plist (2016-06-15) [Support]

  [loading] com.nylas.plist (2016-02-08) [Support]

  [operation] com.spotify.webhelper.plist (2016-07-02) [Support]

  [loading] com.synology.CloudStation.plist (2016-03-26) [Support]

  [loading] com.synology.CloudStationBackup.plist (2016-03-31) [Support]

  [loading] com.valvesoftware.steamclean.plist (2016-04-21) [Support]

  Items in user login: ⓘ

  Dropbox application (/ Applications/Dropbox.app)

  Other applications: ⓘ

  [performance]    QA2G25RMZ4.com.Wunderkinder.Wunderlist - helper

  [ongoing] com.adobe.CCLibrary.135392

  [ongoing] com.adobe.CCXProcess.154272

  [ongoing] com.adobe.Photoshop.200672

  [operation] com.adobe.acc.AdobeDesktopService.87712.37C33553-9150-46E9-8A00-4875B24C79E1

  [ongoing] com.Adobe.accmac.185632

  [ongoing] com.Adobe.Illustrator.209312

  [ongoing] com.getdropbox.dropbox.165472

  [ongoing] it.Bloop.airmail.beta11.200032

  [loading] 390 tasks Apple

  [operation] 219 tasks Apple

  [killed]    A spot of Apple

  Plug-ins Internet: ⓘ

  AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-06-10) [Support]

  FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-06-07) [Support]

  QuickTime Plugin: 7.7.3 (2016-04-23)

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-04-08) [Support]

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-04-08) [Support]

  Flash Player: 21.0.0.242 - SDK 10.6 (2016-06-07) obsolete! Update

  Default browser: 601 - SDK 10.11 (2016-04-23)

  npSurveillancePlugin_1.0.0.934: SurveillancePlugin_x86_64 1.0.0.934 - SDK 10.6 (2016-04-09) [Support]

  Safari extensions: ⓘ

  Instapaper - Instapaper Holdings Inc. - http://www.instapaper.com (2016-05-06)

  Ka-block! -David Graham & Josh Peek - http://kablock.com (2016-04-21)

  Save on Pocket - Read It Later, Inc. - http://getpocket.com/ (2016-02-07)

  MeasureIt - Kevin Freitas - http://frayd.us/extensions/measureit/ (2010-10-04)

  EverNote Web Clipper - Evernote Corp. - http://evernote.com (2016-05-23)

  PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2016-02-07)

  3rd party preference panes: ⓘ

  Flash Player (2016-05-10) [Support]

  WDQuickView (2016-04-08) [Support]

  Time Machine: ⓘ

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 499,06 GB disc used: 317,90 GB

  Destinations:

  EIGHTY9_BACKUP [network]

  Total size: 11.80 TB

  Total number of backups: 31

  An older backup: 04/10/16 05:37

  Last backup: 07/07/16 13:00

  Size of backup drive: Excellent

  Size of backup 11.80 TB > (disk size 499,06 GB X 3)

  Top of page process CPU: ⓘ

  com.apple.WebKit.WebContent (20) 99%

  5% WindowServer

  4% adobe CEF Helper (2)

  CEPHtmlEngine 3% Helper (14)

  2% fontd

  Top of page process of memory: ⓘ

  11,58 GB com.apple.WebKit.WebContent (20)

  1.90 GB kernel_task

  Helper (14) CEPHtmlEngine 721 MB

  CEPHtmlEngine (7) 393 MB

  Safari of 328 MB

  Virtual memory information: ⓘ

  11.00 GB of free RAM

  21 h 00 GB used RAM (3.35 GB being cached)

  3.43 Go Swap used

  Diagnostic information: ⓘ

  7 July 2016, 14:20:28 ~/Library/Logs/DiagnosticReports/Adobe Desktop Service_2016-07-07-142028_ [redacted] .crash

  com.adobe.acc.AdobeDesktopService - / Library/Application Support/Adobe / * / Adobe Office Service.app/Contents/MacOS/Adobe Office Service

  July 6, 2016, 13:59:57 / Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-07-06-135957_ [redacted].cpu_resource.diag [details]

  System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent

  6 July 2016, 13:52:45 self test - passed

  July 5, 2016, 14:12:39 / Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-07-05-141239_ [redacted].cpu_resource.diag [details]

  

  I wonder about these extensions Safari and internet plug-ins.

  Safari, as all browsers, I fear, is a memory hog.

  As a temporary solution, simply exit and restart Safari can mitigate the problem.

• Should I change file Format for CD burning

  I'm new with this please bare with me. What I can say all the music I have purchased through iTunes is in the AAC Audio file format. All the music that I imported into iTunes MY Cd collection has been imported with the Apple Lossless Audio File.

  My question is the sound quality of the BEST CD, do I have to convert the music I bought, with is in the ACC Audio, Apple Lossless file format, then burn to the CD? There should just go with the Audio of the right VAC on CD file. I ask this for music that I bought. All the other songs I imported CD into itunes is already Apple Lossless. I am not concerned about the larger files, just to get the best sound quality for CD.

  Hi 80vette,

  Thank you for using communities Support from Apple!

  I see you are eager to learn more about the quality of the music, and if you can do something else to get them to a better quality.  Now it is possible to convert your AAC to Apple Lossless files, the only change you will see is a significant increase of disk space being absorbed by these songs.  Simply put, you can put the lossless format, but you will hear no audio enhancement.  In addition, encoded AAC files downloaded from the iTunes Store already compete with the quality that you hear on a CD of music retail:

  AAC encoded files compete with the quality of the audio CD and sound as good or better than MP3 files encoded in same or even a high sampling rate. For example, a 128 kbps AAC file should sound as good or better than a 160 Kbps MP3 file. Because the flow is weaker, the AAC file is also smaller than the MP3 file.

  12 iTunes for Windows: AAC

  See you soon.

• myRIO ADC problem: side affacted channel of its previous channel

  Hello

  I use several channels ADC myRIO now and facing a question about it.

  I use 3-channel ADC Port A: AI0 AI1 and AI2.

  I have connected AI0 in the middle of a potentiometer for voltage accoss it. And connect anything to AI1 and AI2.

  CDA works very well. I can move the potentiometer valtage perfectly AI0.

  However, when I changed the value of the potentiometer, the CDA of AI1 and AI2 results changed also, 0, 1V to 0.8V about. Please note I have nothing plugged in these two ports.

  Is this true? the ADC AI1 and AI2 and AI3 same (PORT A) port are affacted by AI0?

  When I connected AI1 to an Anolog output senser, the result was also affacted by the potentiometer which was connected to the AI0.

  When I connect AI1 in power, he was out of influence.

  Did someone already had such a problem? Can someone help me to solve it?

  Thank you

  Fisher lah

  It is the response of support OR:

  Please note the small change you notice when both of your strings are attached can be due to several factors such as the wrong wire shielding, etc and EMC (electromagnetic coupling).

  What is a floating channel terminal, random or variation is normal and due to internal correlated myRIO circuits and should not be a cause for concern.

  Well, I'm still very confused.

• Amplitude varying on the change of the input frequency

  Hello

  I using NOR-5752 scanner to measure the analog inputs of high frequency. NOR-5752 is connected to the module FLEX RIO 7966R and entry to the NOR-5752 is provided using the SMB-2145 terminal outlet box.

  Now, I'm the animals the 0.5Vpp @ different frequencies of tektronix generator of functions directly and by measuring using the digitizer. On the change of the frequency, measured amplitude is changed.

  All,

  For the NI 5752 frequency response strange behavior is expected.  CDA in NI 5752 is the TI AFE5801 (http://www.ti.com/lit/ds/slos591d/slos591d.pdf), and if you look at Figure 19 (p.13), you will see that frequency response of the ADC is only flat after about 1 Mhz.  I checked this with our R & D Department and they said they are not aware of any combination of parameters that gives a uniform frequency response at these low frequencies.

  If a flat frequency response is necessary for these lower frequency ranges, then the 5751 NOR is much better suited because it has a different ADC.  (http://www.ni.com/pdf/manuals/375602b.pdf)  The frequency response of this device is very flat in the low frequencies (see Figure 11 p.15).

  So both devices, NI 5752 and the 5751 OR are designed to measure different frequency ranges.  I hope this helps.

• External sample clock change takes a lot of time on the SMU-5186

  Hello

  I use the external Lv - niScope EX Clocking.vi example to define SMU-5186 using an external sample clock.  However, it takes a long time, 5-6 minutes, before I can get the first block of data acquisition.

  Then I run the example 'niScope EX Acquisition.vi Configured' to switch to dashboard clock. There are also 5 to 6 minutes on the first acquisition.

  I think maybe the SMU-5186 made some calibration when I change the source of the clock.

  Anyway is to ignore the calibration? Or make it faster?

  Thank you very much

  Yiming

  Yiming,

  Delays in acquisition are caused by calibration routines that must be performed on the engine to sample (ADC) every time that changes sampling rate.  This ensures our justified precision specifications.

  I don't know if you've noticed also calibration of Power-Up, which will take 5-10 minutes to complete when the unit is turned on.  This is mentioned in our specifications at page 18:

  http://www.NI.com/PDF/manuals/373257b.PDF#page=18

  I hope this helps.

  Nathan

• The NI USRP-295xR RIO allows a front-end Ettus BasicRX IF-sampling? And what is the rate of the ADC to FPGA data?

  Hello!

  I'm in the quest to replace some aging PCI-5640R. I am currently using as a portable-Journal data solution, mounted in a Magma Expresscard to PCI box with a laptop. As a reference of the time, I use a Symmetricom XLi.

  The equipment is dependent on the sampling finished a set of samples once a trigger signal goes high and also receive antenna azimuth information using two lines PFI more. The signal is sampled at IF, 30 MHz, and the signal is less than 5 MHz bandwidth.

  Now, I started watching the Ettus X 301 with a GPS OCXO and MXI-express interface which should be the same as the USRP-295xR NI. It is available as device NI RIO with three different front ends, unfortunately, none of them work at 30 MHz.

  Q-1: Ettus has the front-end 'BasicRX', but it is only considered compatible with LabVIEW driver and not necessarily with the RIO. Is the front-end BasicRX usable with the USRP - 295XR RIO and MXI-interface with LabVIEW FPGA? Should I just avoid trying tune the nonexistent LO? As long as he gives me data, I can live with some error messages during the Setup...

  It's the best solution for me, but if it is absolutely impossible, I have a few questions:

  Q-2: information on the front end are really rare in the pages Web OR both Ettus, but the WBX is listed up to 50 MHz frequency, to have a filter of low pass of bandwidth of 40 MHz to I and Q. This should mean a total of 80 MHz of bandwidth with I and combined Q,-40 to 40 MHz. Why did the bandwidth to Web pages as OR listed being "40 MHz bandwidth in real time", if the low pass filter of the WBX is 40 MHz in I and Q? Not the band total bandwidth or 80 MHz?

  Q-3: assuming a bandwidth-40 to 40 MHz: could I put the WBX LO at 50 MHz, be tuned to the frequencies from 30 MHz to 20 MHz signal,-20 MHz and use a bandpass filter to the FPGA to extract the new signals and remove all other signals?

  Q 4: I tried to start a FPGA project in LabVIEW and add the x 301/294xR/295xR as a target. Data clock is locked to 120 MHz, which I guess means he will receive no data to 120MS/s IQ? The x 301 Ettus is listed as provide data of the ADC to the FPGA at a rate of 200 ms/s, could someone explain to me why, OR USRP RIO expects only database 120MS/s?

  Hi Idar,

  Yes, you should be able to put the basics on your X 310/USRP RIO and use LabVIEW FPGA to receive 120 MECH. / s of the DACs.  The example I posted is in fact not for the precompiled file bit.  The example I posted is for LabVIEW FPGA, which allows you to add the IP address for the FPGA.  There is a sample project that comes with LabVIEW FPGA which is the recommended starting point to build your FPGA application.  The sample project has all the configuration set up as well as broadcast continuously and pads/FIFOs in the FPGA and examples for synchronization.  There are comments in the code example that show where he must add your own blocks of property intellectual as a filter and decimater you mentioned.  The PDF I posted shows what changes you must make to this sample project using the Remora Basic/LF.

  I would like to know if I'm not explaining this clearly, or if you have any questions, I'd be happy to help you!

• Improvement of the aquistion of ADC pulse time

  Hello

  I use Labview 8.6 Professional version and an ADC NI PXI-5114 in a chassis PXI-1033 to capture some positives.  The pulse widths are in the order of 100 ns to 10.  The impulses can reach CDA at random times.

  With the search here, I found some suggestions very useful and therefore following the examples of Labview OR-Scope my Foundation, I managed to set up a program that allows you to capture these impulses.  For now it works great except for one thing.  It will not capture consecutive pulses that are closer than 2ms.  It is too slow for my application, actually faster than I can be ready to seize the next pulse best.  If I can get this time back down to about 200 US, I'll be happy.  The ADC 5114 specifications indicate a time to rearm in the low microsecond range so I know the hardware is capable of doing much better that what I mean but this is translating to the software side of things gives me some difficulties.

  As much as I know there is no trigger to start and stop captures data on one edge, so in my program I capture of basic data on extraction into pieces and use a signal processing subVIs to pick up the trailing edge of the pulse in order to know when to stop capturing data.  If the pulse width has been set then this wouldn't be a problem, but as I don't know what it will be, I prefer to capture just the pulse so that I don't miss other legumes.

  Is it an inefficient way to solve the problem and what is perhaps originally the code is running slowly?

  I would appreciate any help with a solution to this time getting 'rearm' down (or comment on my code and that you feel would improve it).  I've been using Labview for a few years (only to learn as I go), but it's my first shot using NOR-Scope and a digitizer high speed.

  All suggestions are welcome!

  Thank you

  Daniel

  More importantly, if you want to rearm fast, deterministic, you must use multi-record acquisition.  This sets up the device automatically and very quickly (depending on the configuration and device, 1us to 10us), rearm.  As you apparently don't know how long the pulse can be at any point in time, you must set up the record for a reference position length small (say 10% for 10% pre, post 90% trigger) and samples sufficient to cover your expected worse (10us + 10% pre-trigger + a margin engineering for a pulse that is wider than expected).

  You can activate the multi-record acquisition by plugging in just in a number to Terminal "number of records" on the Horizontal VI to configure.  This will configure the digitizer to divide his memory embedded in N circular buffers to store individual records triggered.  It is the only mode that you can expect to get quick reset time on as host, recovery time, and duration of treatment are not the bottleneck.

  Once you do this, you will need to make a few small changes to the rest of your VI existing to control what (s) you are to pick up.  I suggest you look at the examples of Multirecord NOR-Scope.  If the flow is a concern, you probably want to fetch multiple records at a time.

• BNC-2110, 6023E PCI card and Labview V9.0: is the sensitivity of data acquisition (change more little detectable voltage) 0.002V?

  BNC-2110, 6023E PCI card and Labview V9.0: sensitivity of data acquisition (change more little detectable voltage) is 0.002V

  Hi, I use the software/hardware above to read a voltage of a potentiostat world Precision Instruments No..

  I'm trying to record changes in voltage as low as 0.0003V but using the wizard DAQ, I seem to be limited to a sensitivity of 0.002V.  This is the limit of real sensitivity or have I missed something?

  Any help would be greatly appreciated.

  Hi DCAM77,

  Thanks for joining the forums!

  The PCI or 6023E has a 12-bit ADC.  In other words, it can make the difference between 4096 (2 ^ 12) different levels within the range of cards.  The card you have has a selectable range by ± 10 V, ± 5 V, ± 500 mV or ±50 mV software.

  This means that the minimum detectable variation will be 4 mV, 20 mV, 244 µV or 24, depending on the chosen range µV.

  You should be able to use the ± 500 mV or ±50 mV to get the least significant bit (LSB) value, you need, even if it means that your signal is located between these values.  If not, then you need to consider other materials to the application, or the addition of external circuits across the signal.

• How can I cancel my hotmail ACC.

  I don't want to have hotmail ACC. In addition. How can I cancel my hotmail ACC.

  Connect to your email account. In the upper right corner, select Options | More Options | View and change your personal information. Settings | Close your account

• How to play Wonderking (MMORPG) on ACC without needing Admin?

  I would like to play Wonderking without needing an Admin pass. If I try to play Wonderking on user account, then it will ask for a password. I don't want to change the account Admin CPA, nor do I want to ask my brother on several occasions for password (password changes). So, how can I play Wonderking without having to become admin or ask for password of my brother? (Either by the way, I am able to access his account only if he forgets to close the session or he does something and I sneek on).

  Hello

  answered in another thread

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/how-do-i-play-wonderkingmmorpg-on-user-ACC-without/bc3a5e73-8b55-E011-8dfc-68b599b31bf5?page=1&TM=1300916608937#footer