Change of records

Similar Questions

• How to change the records of Windows Media Center by car

  Is there a way to change which record TV Player Windows Media Center programs. My C drive is full, but it is the E drive for data that is empty.

  Tasks, settings, TV, recorder storage
   
  Saturday, October 16, 2010, 07:12:07 + 0000, nhsslave wrote:
   
  >
  >
  > Is it possible to change which record TV Player Windows Media Center programs. My C drive is full, but it is the E drive for data that is empty.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• How to change values record source based on the target account

  Hello

  What is the best way to change the record source of the members of the target value. For example, I want to multiply the record with X, if the target account is XXX, C1 is XXXX or if account target YYY and C1 is AAAA. I know using SQL, it you will be very easy, but, at some point to end users should be able to change it.

  Any ideas are appreciated.

  PM

  I think you should take a look at the accounts of logic, because this will help you reach your fitness and will be manageable by the end users.

• Rich Table: entity validation fails, but the user can change the record! : O

  Hello
  I develop with JDeveloper 11.1.2.1.0 and I have the following problem. I have a rich table editable according to entity/view with a line entity level validator method that checks the consistency of rank according to custom rules.
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?
  Thank you
  
  Roberto

  Roberto R SCC wrote:
  I noticed that if the validator fails, the error message is displayed correctly, but it is possible to move to a different folder and this causes a lot of problems. I need avoid recording of variation when this validator fails. I > know there is a way to block navigation on an element using clientListener and javascript, but it's a different need because I don't want the user to change the recording while the validator fails.
  How can I do?

  When you change a line, it is the currentRow on the iterator. You do not want any line to become the currentRow.
  I would go to this topic, in this way: substitute the selectionListener table and the listener to custom selection, check if the current currentRow (the one you are editing) isValid (EntityImpl::isValid).
  Proceed with the treatment of the selection event only if it is validated... You could even show an error or a warning message asking the user to provide valid data and even commit the line before choosing another.
  (Sorry, don't have an example of a code of practice now)

• A calling form délettrée changes, unauthorized recording

  Hi all
  
  I have two main forms in the form the form main I ask form after saving documents and it calls the form of overtime and when I try to record sub accounts make its shows me the following error message
  
  A calling form délettrée changes, unauthorized recording
  
  but when I query the database for records for the form main sound here please help me I'm confused.
  
  
  Sarah

  Please change to

  begin
  if
    :ins1.EDNO is null or
    :ins1.cno is null
  then
    SELECT sarahseq.NEXTVAL INTO :ins1.serial FROM DUAL;
  end if;
  
  :ins1.branch1 := :ins1.branch;
  :ins1.class1 := :ins1.class;
  :ins1.year1 := :ins1.year;
  :ins1.serial1 := :ins1.serial;
  :ins1.cno1 := :ins1.cno;
  :ins1.edno1 := :ins1.edno;
  :global.data := :branch || ' ' || :class || ' ' || :year || ' ' || :serial || ' ' || :cno || ' ' || :edno;
  
  :system.message_level := '10';
  commit_form;
  :system.message_level := '0';
  
  if
    :system.form_status != 'CHANGED'
  then
    call_form ( 'c:\temp\platee.fmx', no_hide, no_replace, no_query_only );
  else
    Message ( 'Your entered data could not be saved. Please check the form.' );
    Message ( ' ' );
  end if;
  end;
  

• How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much!

  Sincerely,

  Jie

  Hello Jshen6,

  You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

• Changed the record office to another drive, but now nothing appears on my real desk

  Hey everybody,

  So, I recently had a hd crash and decided to try a hybrid ssd/hdd. I have my boot of my ssd, which I guess by default placed the desktop folder in the same drive. After some research, I found how to change the path to the C: Office, which was the ssd, K:, that was the hard drive. Now every time I save anything on the desktop, it saves on the K: drive but nothing comes up on my real desk.

  I guess it is because the path Office is on the C: drive, but can I change it so that it displays all of my K: drive?

  I am running windows 7 Professional and use the double disc WD Black2.

  Thanks in advance!

  Moving files in Windows 7 and Windows 10 user

  1 this is the standard way to work [I've included in the procedure to move all user folders rather than just the desktop folder you mentioned and I spoke also defining the IE file downloads].

  1.1 create a folder K:\Documents & moving * your data inside files [move content from C:\Users\yourusername\Documents not the folder \Documents C:\Users\yourusernamehimself].

  [* Windows will offer to move the files on you when you change the location definition in subsection 1.2 tab, but it can get really annoying if it fails, then it is safer to move yourself in advance.]

  1.2 set the location in \Documents C:\Users\yourusernametab to point to K:\Documents.  You do this, as you must already know, by doing a right click on the file C:\Users\yourusername\Documents and selecting Properties and then click on the location tab.

  1.3 set permissions to K:\Documents by clicking right on & selecting share with specific people or one right click on it & select Properties then the sharing tab.  [You can allow yourusername & accounts Admin reading & writing, but other users ['allowed users'] to have, for example, list only permissions].

  1.4 repeat 1.1 - 1.3 for these other user folders [I showed records that I moved them just for example]

  Music K:\Documents\Music,

  Photos K:\Documents\Pictures,

  Videos K:\Documents\Videos,

  [IE] Favorites K:\SystemSettings**\Favorites

  Links K:\SystemSettings**\Links***,

  Search K:\SystemSettings**\Searches.

  [* SystemSettings - it just suited my backup plan to separate these parameters in one group different file.]

  [* Links - This is the entrance to 'Favorites' that appears at the top of the Windows Explorer Navigation pane - he has very wisely been renamed in Windows 10 quick access since that's what it is dedicated]

  A folder of additional user exists in Windows 10 - the screenshots folder and my advice on the use of this facility and moving his file is in setting and checking of the screenshots folder

  - - - - - - - - - - - - - - - - - - - - -

  2 verification of the task and correction of errors by using the registry; check the IE, downloads folder

  2.1 it is probably possible to change the parameters of location in the registry manually rather than use the location tab, but I only looked at him subsequently to check happened correctly and to correct an error I had made.

  2.2 as it is to change the registry the usual warning apply [back to the top of all, make an image of the system, test the system repair disc / Windows installation disc so that you know that you can start with something to be able to restore the image if Windows will not cooperate].

  2.3 open RegEdit [C:\Windows\regedit.exe] - I always open it by right-clicking and selecting run as administrator, but I don't think that it is essential for the special keys used in this task.

  2.4 I checked how to implement by accessing user ID

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  and clicking each entry in the list to see what number S-1-5-21-NNNNNNNNNNNN-100X is the name of the affected user.  The user name appears in the right-hand side of the RegEdit window you look at each entry.  The number of S-1-5-21-etc., it will be the X at the end between your user accounts.

  2.5, go to this entry [using the S-1-5-21-etc number you just found]

  HKEY_USERS\S-1-5-21-NNNNNNNNNNNN-100X\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  2.6 checks if the value of the personal in the right side by double-clicking on the personal and changing that value to that of the new way you have implemented already.  [Staff means entry of user my documents ].

  2.7 checking the values of the other user folders that you moved.

  2.8.1 [Windows 7] while you're there, check IE, location of the downloads folder.  It is in the key

  {374DE290-123F-4565-9164-39C4925E467B} which is normally the second entry down just after {Default}.  This sets the folder you would normally define in IE, Tools, view downloads, Options.  I saw that the normal procedure fool you once, and there is no adverse consequence to set the correct value in the registry instead.

  2.8.2 [Windows 10] you must manually set this folder once for a corresponding registry entry must be created.  Thus, as a first step, set the folder in IE, Tools, view downloads, Options.  Subsequently, you will be able to check & to change the setting to Explorer\Main HKEY_USERS\S-1-5-21-2568008921-1580239441-348697478-1001\SOFTWARE\Microsoft\Internet with its default download directoryentry.

  2.9 you will also see a few lines up key

  HKEY_USERS\S-1-5-21-NNNNNNNNNNNN-100X\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell records

  and the corresponding entries in there match those in which you have worked in.  I mention the existence of the second series of entries just because you could see the and might get scared that something has gone wrong.  When I made this correction, I just couldn't get the second set until later so I have whatever it is worry.  You will notice that some entries exist in two of these areas, while others exist only in one of them.

  - - - - - - - - - - - - - - - - - - - - -

  3 while I saw some threads in this forum who allege that registry changes can achieve more than using the box location tab [i.e. more than my procedures in article 1 & 2 cover], I see no convincing evidence that it worked [and I saw at least a thread who said that subsequent attempts to run a repair installation wouldn't work - the system has just said that he could not. work with unexpected folder locations that he discovered].  I think that these discussions said that they had moved all of the user profile on the data disk, but I have no notes thereon as they seemed to me to be questionable procedures.

  - - - - - - - - - - - - - - - - - - - - -

  4 benefits of the relocation of the user folder

  The separation of your data files of your operating system & its applications is not just free up some space on the OS disk [normally C:\], it also allows to make images of system regular training of the BONE that are almost certainly going to be 40 GB or smaller [and only take 25 minutes to do].

  It would take you back to excellent capabilities as response to the corruption of the serious system could then be to boot from a system repair disc or a Windows 7 USB/DVD installation and restoration of this image, i.e. restore the system drive, exactly what was on it at the time that the image was made.  This restoration only takes about 25 minutes.

  I did a couple of years and would never set up my system any other way now.  I had previously considered images of the system as a tool of INFORMATION services used to avoid the difficulty of flaws correctly, but I was wrong.  Now, I make them regular system on external drives and can therefore get reliable disaster & quickly.  You can hunt with confidence the flaws or just to do experiments in knowing that you will be able to go back to square one, even if everything goes wrong.

  With separate system & datafile discs, you can continue to do backups of simple file of your own files on your disk data using Windows backup or another backup of file utility.

• Video contrast/brightness changes during recording

  When to play some Windows Media Center tv records changes in contrast or brightness up to a point where the image is dark to see and the brightness of the tv must be set to the top (it does not help the problem altogether). The problem isn't with my graphic card or my tv because it does the same thing on my other computer.

  Data sheet:

  • AMD Athlon X 2 7850 2.8 GHz 2 x 512 KB L2 Cache 2 MB L3 Cache Socket AM2 + 95W processor Dual - Core AD785ZWCJ2BGH
  • CORSAIR XMS2 1 GB 240-pin DDR2 SDRAM DDR2 800 x 4 Memory Sticks
  • ASUS EN8400GS Silent/P / 512 M GeForce 8400 GS 512 MB DDR2 64 - bit PCI Express 2.0 x 16 graphics card
  • BIOSTAR A770E AM3/AM2 + / AM2 AMD 770 ATX card mother AMD
  • COOLMAX CA - 400 400W ATX POWER SUPPLY
  • ATI HD 650 PCI TV Tuner

  Any help would be appreciated.

  Thank you

  Hi LGrzy,

  1. what kind of failure does the ATI HD 650 TV tuner had recently?

  2. what type of files which is having the issue? It is same on any computer?

  3. it happens with all records of TV?

  I suggest you reinstall the Windows media center and check the difference in TV recordings.

  (a) open the configuration/programs and features Control Panel.

  (b) click on "Turn Windows features on or off" in the left pane.

  (c) Expand "media features", uncheck "Windows Media Center". Click 'Yes' to continue and click OK to exit. Then restart.

  After the restart, return to Windows features windows and check the box for Windows media center, link apply and restart the computer, check whether the is working now.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change a record to make 2 versions (longer and shorter for a special topic)

  I recorded a session of many facets as a unique record of 2 hours.  I was able to change the 'backwardness' of the session, so I have a nice final presentation of the various participants / subjects.  However, I would also like to produce a 2nd just record the last speaker / topic, without destroying the long version.  I could change it at the first hour (first 3 speakers) and save, but then who would destroy the long version.

  Is it possible to reproduce the recording, so that I can keep the full version, but then change the duplicated record to change down to just the last speaker / topic?  I can't find a way to do this in Adobe Connect edition.  Do I have to export the file to Flash (FLV) or MP4 and then try to find a way to change this file down to get just the last topic?  Any ideas?

  
  

  The best solution would be to lower the recording of files to the server and then re - download, you have two versions of the record, with different URLS. You can edit each separated from the other.

  To do this add /output/NAME.zip?download=zip to the URL of your recording. Name the zip file, all you want. You will download a zip file. Do not extract or mess with the zip file, simply upload it to the server to connect to the location in the content library. You can even give her a customized URL!

  You will have then two versions of the record on the server you can do at your leisure.

• table changes not recorded

  Select table_name, followed by dba_tables where table_name = 'ABC ';
  
  TABLE_NAME LUN
  ------------------------------ ---
  ABC YES
  
  
  There is no record in dba_tab_modifications for this table, but for the other tables there. There are many inserts on this table.
  
  Is there something I m missing? the table contains a clob column. This could be the cause?
  
  Kind regards
  
  Peter

  These views are filled only for tables with the attribute of SURVEILLANCE. They are intended for the collection of statistics over a long period of time. For performance reasons, the Oracle database does not fill these views immediately during the actual changes. Run the FLUSH_DATABASE_MONITORING_INFO procedure in the DIMS_STATS PL/SQL package to fill these views with the latest information. The ANALYZE_ANY system privilege is required to perform this procedure.

  at the bottom of the doc
  http://docs.Oracle.com/CD/B19306_01/server.102/b14237/statviews_2097.htm

• Change the record level of logs saved automatically in WCI with recorder

  We have an obligation to record certain actions (login, acct creation/mod/termination of employment, etc.) will be checked at a later date.
  
  We cannot use the Audit Manager because the auditor may not be in the administrator group.
  
  So, we try to see how to save messages need us somewhere in the /ptlogging folder and manage permissions of file from there.
  
  I changed the ptLogger.xml to add an appender with a new target file name and save messages 'INFO', for example.
  
  < class = "org.apache.log4j.DailyRollingFileAppender appender" name = "PortalInfoLogFile" > "
  < class = "com.plumtree.openlog.log4jbridge.MyPatternLayout layout" / > "
  < param name = "File" value = "portal/portalInfo - log.log" / >
  < param name = "Append" value = "true" / >
  "" < param name = 'DatePattern' value = ' "." yyyy-ww "/ >
  < / appender >
  
  < filters appender = "PortalInfoLogFile" server = "portal.blah.blah" >
  < component by default >
  < active level = 'false' value = "Debug" / >
  < active level = "true" value = "Info" / >
  < active level = 'false' value = 'WARNING' / >
  < active level = 'false' value = "Error" / >
  < active level = 'false' value = 'Fatal' / >
  < active level = 'false' value = 'Action' / >
  < active level = 'false' value = 'Performance' / >
  < active level = 'false' value = 'Function' / >
  < / component defined by default >
  < / Filters >
  
  The ptLogger.xml seems to be read, because the new file is created. However, he isn't getting populated unless PTSpy is also running while the actions take place.
  
  Is there a way to force messages to be added to a file via the Logger tool only?
  Is there a setting I need to force the recorder instead of PTSpy?
  If the only way is to open the PTSpy, then how I set that when the server starts?
  -I tried the shortcut from start, but obviously someone has to stay connected to the server. Can I put something to automatically open a session and then lock the admin screen?
  -I created an automatic Service using SC, but it does not start as a user or a local administrator. The forced departure of error message indicates "error 1053: the service has failed to demand launch or timely control.» Event Viewer > Security > Audits of chess are event ID 560, that they are required to start or automatic restart.
  -I tried a scheduled at the start of the server task, but the task runs and stops if nobody is logged on the server. If someone is currently logged into the server, while the task is running under a different user name, then PTSpy gui will show and stay open (probably until the Logoff?).
  
  Alternatives?
  Thank you in advance!

  What about using the archiving and the poster having officer audit manager somewhere your user files can be accessed?

  user5817265 wrote:
  We have an obligation to record certain actions (login, acct creation/mod/termination of employment, etc.) will be checked at a later date.

  We cannot use the Audit Manager because the auditor may not be in the administrator group.

  So, we try to see how to save messages need us somewhere in the /ptlogging folder and manage permissions of file from there.

• How to change the record to a local drive on network drive for all users (Small Business Server)?

  I need to implement a change on the backup to a local drive to save to the network drive/folder to 15 users in a Small Business Server, can someone help?

  Thank you

  Hi Frydom,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forums.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• change the record group for a lov

  Dear Sirs,
  I have a list of value (LOV) and I have 2 record group, and I want to associate each of these group record depends on the conidition
  for example
  
  If condition 1
  associate the record group 1 LOV
  on the other
  associate the record group 2 LOV
  end if;
  
  Please help me
  Thanks in advance

  Check the built-in SET_LOV_PROPERTY, you can use this then assign a recordgroup to a lov.

• Lightroom 3 and CS5 color change when recording to JPEG

  Desperately need help on this one...

  In a nutshell if I use lightroom 3 only and print the images printed images are exactly the same on the screen - so I guess the calbration of the screen is correct.

  If I use lightroom 3 and export to CS5 to continue to make adjustments more when I save the image in jpeg, it seems to have saved well. However if you then maximize the photo in full-screen colors change - radically. Basically, they look aweful. They become quite dull and lose it saturation settings (which were made originally in Lightroom). They print this much too.

  It drives me crazy. I don't think that it has nothing to do with the calibration because it is OK when just using LR3.

  I played with it quite a bit to try to find a solution and have found that if I export for CS5 and Lightroom makes no changes to the photos but just save - she always changes the colors

  Sorry - if it makes a difference... may not, but I have not exported from lightroom for CS5.

  Everything I do is select the right click, click on edit in the > Adobe Photoshop CS5.1...

  Then in CS5 it opens and appears exactly the same as in LR

  From there, I click on file > save under > Jpeg formats and there is an another labeled checked - ICC profile: Prophoto RGB (not really sure what it is and there is no other options to change)

  I tried to show a difference in color by joining the photo.

  Photo right is edited in Lightroom. These colors are what you see when it is maximized on screen and the colors print correctly too. This photo has been open and then in CS5 (photo left) (with LR adjustments) and saved as jpeg and you can see how to change the colors. But you do not see the change unless the screen is completely optimized - and she that prints a lot too.

  I don't know what to do someone had similar problems?

  

  Yes.  Had something similar last night, but with LR 4.1. I suspect that we each have a color profile mismatch, although I had no time to solve my problem yet.

  My first thought is that the native LR color space is Prophoto default, but PhotoShop must have its 'working color space' specified by the user.  Unless Prophoto is specified in PS, there will be differences in color on a Prophoto image scale (sensitivity) of color-travel will vary from one image to the opening image.

  To change the workspace in PS, pull down the Edit menu and select "color settings".

  Don't forget to check the box to inform you and ask how you want to handle the inadequacy of the color profile.

  As the previous poster said, prophoto is a bad choice for the use of the web.  probbaly the most commonly used color space sRGB is relatively low

  Good luck.

  Jerry

• Favorite random, one at a time, change the records?

  My problem started with the previous version of Firefox, and continues with the version 26.0. My HP Compaq dc7800p convertible runs THAT XP Pro 2002 with Service Pack 3 installed.

  I'm going to look for a particular bookmark, and it will not be in the right folder. I need to find all of my other bookmark folders until I found and then bring it back in the right folder. This problem occurs only with a bookmark both and about once a week. So far, it has never been the same bookmark, still another.

  Here are three examples:
  (1) a bookmark for filmjunk.com, which is normally under "podcasts", was under my "local" folder I have access to FilmJunk several times a week.
  (2) an article I wanted to read more later from AMC.com, which I placed in a 'general' folder, found under the 'games '. The article has been bookmarked about 30 days before my deciding to read the article.
  (3) a bookmark for citizens Bank filed in 'Betsy', but was found in a folder for my school "ECC." This last bookmark that I hadn't used in over a year!

  I have reset Firefox several times, re - import favorites to Internet Explorer 8. Each time, after a day or two, the problem starts again. There seems to be no correlation between when I used last specific bookmarks and where or even if I initially placed them.

  -waka_Flocka_flame,

  Thanks for the quick response.

  I'll try your second suggestion first, "problems of fixing with bookmarks."

  On this page, under 'Difficulty the bookmarks file' help, I don't have the box 'Read only' ticked, so that the article did not help with my problem. Instead, I'll try the section directly below titled 'create a new file to bookmarks '.

  Given that the problem came back after a few days, I will update with the results soon.

  Thank you once again.

• Change profile record cell phone

  I followed the instructions that appear several times and could not register my Nexus 6 which is an exchange for my troubled Turbo. Please tell me what I can do.

  @GolfOx

  I can take a look. Can you please PM me your IMEI Nexus?

  Mark

  Forums Manager