Change read only CD/DVD

Similar Questions

• Access changed 'read-only '.

  Sometimes when I edit scripts in certain events at buttons and radio buttons (I noticed with the calculate event, but it may occur with other) the button becomes read-only.  It took me a long time to find a way to go to the Source of XFA tab and remove access = "readOnly" thing in the source code for the object.  1. everyone knows that?  2. has anyone figured out how to stop LiveCycle to do this?  It's probably trying to be helpful, but it's just a pain.

  Hello

  You can use the layout: ready event of the button for your script instead of the calculate event.

  Try to move the Yes_No_Base.rawValue = '2 '; before the xfa.form.recalculate line (1);

  When previewing the form in Acrobat, press Ctrl + J to open the javascript console, which will show the errors, if they exist.

  The calculate event explained to me that each change of the form of shooting. When we had a subject that pushed a value to another discipline, we moved the script of the calculate for events event as exit the event. If an object is dependent on the other fields to get its value, then it is logical to keep the calculate event.

  Check out Adobe "LiveCycle Designer ES scripting Basics", to the good events expaination.

  Good luck

  Niall

• cannot change read only files on photos

  l downloaded photos on a notebook to windows 7 while outdoors. When l arrived at the House and has moved to my computer - vista windows, that all the photos were developed as read only files. There is no check in the file read only to uncheck the box. How can I edit my photos? on both computers, it is read-only. Thank you, Lisa

  l have no problems posting photos, but l cannot solve, etc. all cultures it is read-only. in the box to uncheck properties did not have a tick in it. l do you usually uncheck the box, but there is nothing there. LM not really computer smart, is there another way to do?

  ====================================

  Thanks for the info.

  I assume you are using the photo gallery Windows for editing?

  The same problem occurs if you open and edit a photo in paint?

• PES 10 can't change read-only groups layer (aka I want to just make a custom in the elements DVD menu)

  A little history: I wanted to make a custom menu, so I opened a copy of one of the menu canned. In PS Elements 10 PSD files.  It opened with all the layers and their showing sublayers.  So far so good.  I made a lot of editting and had my menu pretty much right, recorded and burned a DVD with it.  I saw a few corrections that I need to do so I opened the same. PSD file and it showed all main layers (with the folder icon) but not the attached layers.

  I double-clicked to open these layers and got:

  "You try to open a group, which is not supported in Photoshop Elements.  The layers in this group will be simplified in a single layer.  Simplify the layers? Yes No. »

  I just change these things yesterday.  Everything I've done since then is save my software online. I saw that it said in this forum that "Elements doesn't support layer group/sets' but she was referring to an earlier version, I guess.

  Question 1: Is it always true PES 10?

  Whatanagement 2: if so, how me I edit the other day?

  Thanks in advance for any help you can offer.

  Joe

  #1: Yes.

  #2: I don't know.

  You need use a 3rd plugin to change layer groups.  See this discussion:

  http://forums.Adobe.com/message/3954579#3954579

  Ken

• Satellite P20: Device DVD Player reads only the DVD but cannot burn CD & DVD

  Hello

  I have a toshiba P20, and I'm having a lot of problems with it. One of them is my DVD UJ811. I don't really know what is happening, the drive was already replaced and a few weeks later, it was exactly like the front, and the service provider made me pay almost 70EUR for a budget of 400EUR rejected.

  I would like to know what really should do, I can't read the CD and I can not burn CD/DVDs, I can just read DVDs, nothing else.

  I have seen some forums on the net, too many people in the world has the same problem I have and I really need to know what is the best solution for me.
  Thank you

  Hello Rafael

  I'm very surprised by your post it here because I've used Satellite P20-303 (a red) about two years. Laptop is now used by my brother and it works perfectly. I don't really know what problems you have, but I never noticed anything suspicious. Up to now I removed the cooling Grill on the bottom twice to clean the unit, and that's all. After that laptop computer cleanup runs a lot more quiet then before.

  Back to ad: I have to be honest and say that I traded with TEAC DV - W22E DVD - rom. original drive was DVD - RW and TEAC DV-W22E DVD-RAM. My brother use it pretty extensively, but until now there is no problem at all.

  I don't really know what the service is doing, but if possible replace the drive TEAC one. I can tell you with certainty, it works very well. Moreover, according to the description of your problem, I am sure that the drive is faulty.
  You can replace one. It's very simple to do.

• Checkbox option to change read only values

  Basically, I'm trying to implement javascript or formcalc to exercise the following functions...

  When you check the highcost_Yes field value is changed gracieux1 to 10, with no control in the field of the highcost_Yes , the chargement1 value must be 8.

  I have the default value for the field chargement1 the value 8, so if me can cause problems.

  check the highcost_Yes box (values 1 or 0)

  It's the snippit of javascript I've tried:

  If (highcost_Yes.rawValue == 1)

  {

  gracieux1 is 10

  } else {}

  gracieux1 is 8

  }

  After some research, I tried this code in formcalc:

  if(highcost_Yes.RawValue == 1) then
  (gracieux1 is 10)

  ElseIf (chargement1 == 8)
  endif

  I learned javascript this term at school so I understand the concept I'm far from practice effectively.

  
  Can someone tell me where I was wrong?  Thank you!

  Sorry - no double == when you set the value:

  If (highcost_Yes.rawValue == 1)

  {

  managed1. RawValue = 10;

  }

  on the other

  {

  managed1. RawValue = 8;

  }

• Change to read only the "Hosts" file get an error, that you have not permission to save in this location

  Original title: change read only document___

  In Windows7 Home 64 bit, I'm editing a document "Hosts" in System32 > drivers > etc >

  It comes up with "you don't have permission to save in this location...".

   

  I am registered as an administrator and I can't seem to change the blue box 'read only '.

   

  I went to the command line using "attrib" but the answer is "no recognized internal or external command".

   

  Help!

   

  John

  
  

  Hi John,.

  Step 1: Follow the steps mentioned in the article below, which deals with a similar question

  You cannot change the Hosts file or the Lmhosts file in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/923947

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• File attributes can be changed from read-only on a global scale?

  I just finished using Easy Transfer from XP on a Win7 machine on another PC and find that almost ALL of my documents, spreadsheets and Access databases has been changed read-only.  I changed a couple of them to full access through the Properties menu, etc. and many prefer to be able to do on a global scale as I speak of hundreds of files that have been changed by this transfer.

  Is there a way to do this on all my files on my hard drive?

  Ronnie,

  It just seemed to me that all I really need to do is to find a way to change MY profile for equal to that of the admin. I did it just for a few files and these files are no longer read-only... !  I hesitate to change my system to an ADMIN login for security reasons.   I also changed the attributes of the lowest subfolder, then the above it and then I can open all of the files in these folders in r/w mode...

  So, is it possible to automate change the attributes of all files folder and subfolders?

  Fred615

  Hi Fred

  Yes, you must be connected to a Director profile.

  If all these files that you want to remove the read-only attribute on the D: drive, perform the following steps. Use these commands exactly as written, including spaces.

  1. open the elevated command prompt by using the profile administrator.

  The location should display C:\Windows\system32 >

  2 type cd\

  Press ENTER

  The location should now show C:\ >

  3. Type  D:

  Press ENTER

  4 location should now show D:\ >

  5 type attrib - r *. * /s /d

  Press ENTER

  This should remove the read-only attribute of all folders and files on that drive.

  Test and let us know the results.

  Concerning

• Photos appear as read only files

  cannot remove the read-only my vista jointsdans.

  I can't remove the read-only my files (at least in the photos).  It is provided with a solid box, not a check mark and I can't remove it.  I need to edit and print photos, and I don't know what to do.  The only software I have installed is a HP printer wireless on my home network.

  Hi HeatherSt,
   
  -Have you noticed this change after you install HP printer software?
  -Were you able to edit photos without any problems before?
  Is there another account administrator user on your computer?
   
  Note: It is possible that change a read-only file can cause a program that relies on the file to stop working properly, so be sure that it's okay to change a read-only file before you proceed.
   
  Cannot change files read-only, but they can be copied, moved, renamed, or deleted. Therefore, try to Rename the file or perform one of these operations and check if that helps.
  Edit a file read-only
   
  If you can't always change read-only, follow the steps in the link below:
  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

• defragment a volume read-only?

  How do I defrag my pc when he always tells me "cannot defragment the volume read-only C?

  You need to change read only to normal C (how have you managed to make drive C read only anyway?).   This is done with the ownership and permissions.  Here is information on the two that will help you make the necessary changes.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Once you have the permissions of all rights and ownership of the drive, then you can change the read-only attribute and should allow you to defragment.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I converted a PDF file to WORD. DOC, it opened in read-only and I'm unable to edit text.  How can I solve this problem?

  When I tried to convert a PDF to WORD file. DOC, it opened in read-only and I'm unable to edit text.  How can I solve this problem?  I don't know how to change read-only.

  Hi Judith,

  I'm sorry that the subscription has not worked for you. I cancelled it and treated a full refund since you cancelled within 30 days.

  Best,

  Sara

• How to disable the USB port and change DVD drive to read-only?

  I have upgraded my Vista Home Premium from window to window 7 Ultimatum. I tried to disable the USB port and and change the configuration of DVD room to read only via the bios, but I wasn't able to do. The bios always the same, whether it was when I had vista.

  I wonder if the operating system upgrade from Vista home premium to Windows 7 ultimate trigger necessarily upgrading the bios in order to take full advantage of the Windows 7?

  Thank you

  * original title - upgrade from Vista home premium to Windows 7 ultimate necessarily triggers upgrading the bios in order to take full advantage of window 7? *

  rThen your question isn't specific to Windows 7, you must consult the manufacturer. You should be able to disable the USB via the BIOS ports. Also, why do you want to set the optical drive as read only? If it is shared? If so, the advanced sharing disk properties, from there, you can set permissions on the drive. If you releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

  CD/dvd drive read only disks not vain iv tried everthing I can think of an infusion iv, any help appreciated, thanks lee.

  Hi leejarvis,.

  ·         What version of the operating system is installed on the computer?

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Have what troubleshooting measures you tried?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Eliminate the 'read only' files on DVD. Went to properties and clicked off the coast on the 'read only' box, but it does not work.

  Put some files on DVD and then tried to change them.   Receipt message they are 'read only' tried to click on 'read only' in the properties, but this does not work.  The 'read only' is back.  How can we change the files on a DVD?

  In general, once you write multi-utilisations, you can not edit the file.  If you use a rewritable media, you can delete the file and write again.

  DVD writing (burning) is not present natively by XP.  What application you are using, including version?  Support for packet writing?

• Thunderbird 38.2 n Lightning: after restarting TB same calendar are trusquinées - read-only - unlocked n those work synchronize well n change my changes

  TB 38.2.0 Ln 4.0.2
  (1) after you restart TB same calendars are trusquinées - read-only - unlocked.
  (2) calendars, which are always announced don't synchronize well n change my changes (e.g.: if I change a n movement event title there from today to 2 days when I opened TB events is placed again in n today I lose the title changes!).
  Are other users havin same problem? Looks like this.
  Waiting for an answer, cordially.

  Update to Version 38.3.0 solved your problem?