change the default control palette

Similar Questions

• 11R2 how to change IP in OWB_REPOSITORY_LOCATION and the default control center

  We are changing the IP address of the Server repository database OWB. Review of the locations tab, I found the default control center and OWB_REPOSITORY_LOCATION are configured with IP addresses, so I need to change the IP addresses in hostname in both entities. I think that I can not use the OWB_HOME/rtp/sql/UpdateLocation.sql script, so, how do?
  I would be grateful if someone points to the other questions I should check OWB point of view.
  
  Thanks in advance
  Carmen

  Carmen,
  Just change the address of WB_RT_SERVICE_NODES control centre.
  Don't take any attention to the value of hostname DEFAULT_CONTROL_CENTER in Design Center because this value is taken from the connection details in the window of loging (for display in the Design Center) (if you type in the address IP of Loging window you'll see IP address in the settings of DEFAULT_CONTROL_CENTER without taking into account the actual address stored in the repository OWB).

  Kind regards
  Oleg

• Is it possible to change the default channel strip settings?

  Is it possible to change the default channel strip without having to depend on models?

  For example, I always wish to have:

  • Follow the value Name = 3 lines instead of the default line 1.
  • 'Follow the icons' checkbox deselected
  • Always follow box color
  • Control surface Bars always deselected

  Stuff like that... This apples to any screen that is affected by the Configuration of channel strip window. (View mixer or titles).

  Thank you!

  Is it possible to change the default channel strip without having to depend on models?

  NO.

  But why not use a template? You use a template of this moment anyway, the default value of project. Just change and set the Start Action that you configured

  

  Fact

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Can I programmatically change the default property to create for all elements of the front panel?

  Can I programmatically change the default property to create for all elements of the front panel?

  I need to make the logout button, when click on, takes care of all the default values of my fron Panel.

  There is no way to programmatically call the functionality of an editor 'Use default' or 'Load Default'. To do it yourself, you will need to write your default values for each control explicitly in the diagram, when the user press the logout button.

• Cannot change the default e-mail program

  I tried to change the default email program in Vista to Thunderbird by following the instructions found on many sites (Control Panel, programs by default, set your default programs, and then I select Thunderbird, then I click on "set this program as default").

  However, when I try to send a document as an attachment directly from the application in question (Adobe Acrobat, Microsoft Word, etc.), I get an error message that says: "no profiles have been created.  To create a new profile, use the Mail icon in Control Panel.  I believe that used to work at some point, although I did have this computer for a long time, so maybe it's that he has never worked on this computer.

  Any ideas would be greatly appreciated.

  Thank you.

  It is usually the case with an update of Office, it will reset Outlook as the e-mail Manager by default and assign it all by default available values.  You will need to return to "default programs |" Set your default programs and reset Thunderbird as default and there all available default values assigned.  It is usually a good idea to set Thunderbird as default under "default programs |" The value of program access computer settings by default and after finishing upward on the tab "Set your default programs" by Ramesh was mailed. Please do not forget that * every * Office Update, you receive will probably reset Outlook as Manager default e-mail, and you will need to repeat this process whenever they do.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Change the default DPI for scanning in paint

  How can I change the default values for scanning for painting so that each scan is 300 dpi?

  I'll give you an answer. What the interrogator does not understand, is that MS Paint does not have a setting for the CIO. There is no default DPI setting in MS Paint. The setting is controlled by the scanner driver or scanner itself. MS Paint simply communicates with the driver for the scanner, which then continues to do the analysis, then once completed, he hands the digitized data back to MS Paint. Therefore, the parameters of the interrogator wants to know how to change are not in MS Paint. they are in the driver scanning interface. This driver determines how he manages the parameters after returning the scanned data to the connection/disconnection of call program, in this case MS Paint. Most of the drivers scan all right back to their default value. In the case of the user, it's 100 dpi, but another scanner, this could be 150dpi (common with many scanners a few years back), and by default most recent scanners often at 200 dpi. After scanning, you need to change the defaults anywhere from new, because once the scanner driver handed the scan back data to the calling program, it is no longer in communication with her. It doesn't matter whether you use MS Paint, Picasa, IrfanView, or any other program that connects to the scanner TWAIN. If you start with a scanner that has a default of 300 dpi, you would have thought that it was a question on. You can not insistent that no one answered your question if it is based on the wrong premise at first.

  Some scanners allow control of the scanner itself. I use a HP (all-in-One) printer/scanner combination. I can configure default to the control panel of the printer/scanner at 300 dpi or whatever value I want; I often put it at 600 dpi. Then I can scan directly from the scanner/printer and still get 300/600 dpi scans. By default the program to manage the registered file type determines which program will be executed when the image is sent to the computer. It could be MS Paint or IrfanView or whatever. Very often, I send the scans on a SD card on the printer instead. When I'm finished, I have a SD card with images scanned at 300 dpi that I take to another computer. Because the scanner/printer has been set to use 300 dpi by default, MS Paint, IrfanView or any other program that launches a scan will get also 300 dpi scans.

  What the questioner needs is a scanner which allows its default value to or one that is default to 300 dpi in a first time. If you try a new scanner, you will find that the parameters does not return to 100 dpi, but instead has regardless of the definition of the scanner as default.

  Given that most of the pilots to simple scanner always return to the default devices, and in this case, setting this parameter scanner is only 100 dpi, you can use a software that is specially designed to solve this program with its own resolution settings. An example is called "search". In its interface, you choose what the desired resolution, then when it communicates with the scanner, he deals with the change in the value whenever a scan is requested.

  If you use color or grayscale is a separate choice outside the DPI setting. Some scanners can scan to a different resolution for shades of gray than they do for the color. Nevertheless, the problem and the solution is the same.

• Change the default audio device and the recognition of the application

  I'm new to Vista (home premium w/sp2) and I am confused by works the assignment of default device (control_panel-> sounds), specifically the device change with existing applications (running).

  I change frequently between the speakers and the headphones - however, the change of output device is not recognized by running applications, such as iTunes or Firefox and will not be recognized until I have completely quit and restart the application.

  Why?  It is extremely annoying and incoherent other well educated such as Mac OS X platforms.  I would just like to change the default audio output device, on the fly, without the need to restart applications.

  I do something wrong or Vista offers this functionality to the end user?

  Thank you!

  Hello Wyntr,

  Thank you for using the Microsoft answers Forum.

  Currently, the function of switching between audio output devices is carried out manually. To make the selection, you can click the sound icon in the taskbar, then click the button at the bottom of the volume control Mixer. In the properties of the volume, you can click on devices in the upper left corner and select the appropriate device to make it the default for applications open from then on.

  Let us know if this can help, or if you have additional questions on this subject.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How can I change the default program to open ZIP files?

  original title: open .zip files

  I changed the default mode of opening zip files somehow. My laptop now wants to use something other than the Windows Explorer to navigate to the zip files. I tried to "Browse" to Windows Explorer, but it will not find...

  Zip files still show with compressed folder icon?

  Try re-registering the DLL that controls how the Zip files are open.  Click Start and in the search for field type

  Regsvr32.exe /u zipfldr.dll

  Press ENTER.  Click Start, then in the type field search

  Regsvr32.exe zipfldr.dll

  Press ENTER.  See if that fixes things.

• How can I change the default action of record?

  My laptop with Windows vista has curently explores as the default action (because it does not open in a new window which is my chosen prefrence) and opened as the next option. How can I change the default action to open?

  Hello Nekora,
   
  Thanks for posting on the Community Forums of Microsoft Vista.

  Note: to set Windows Explorer to open in a new window, you must have the disabled Navigation pane.

  To Turn Off the Navigation pane, follow the steps.

  1. click on the toolbar button organize in Windows Explorer.
  2. click on page layout.
  3. Turn Off the Navigation pane - click Navigation pane to turn off highlight the icon.

  Later the value folder always options open the folder in a separate window.

  1. access control panel.
  2. open the Folder Options.
  3. Select the option "open each folder in its own window.
  4. click on apply and Ok.
  5. close the Folder Options and Windows Explorer window when finished.

  Restart the computer and check if it opens in a new window.

  It will be useful.

  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to change the default (Windows 7) painting 'Save as type' JPG (from PNG) format when recording using the * only * the keyboard?

  This is the 2nd time this same question, the 1st time that I was given an irrelevant answer which was not helpful at all. Please take the time to read and understand what I need to before you answer.

  I just need to learn how to change the default PNG to JPG, so every time I save a screenshot using (only) the keyboard, it will already be showing JPG as the "Save as type". I am sure that it requires an edit registry so just point me in the right direction and guide me on how to do it, that's all I need.

  To help you understand my dilemma, I take a lot of screenshots and Ctrl + V paste in Paint almost daily. Since my physical disability in my arms causing me pain and discomfort when I use the mouse, I avoid using the mouse I use the shortcuts as much as possible to help reduce the constant pain, I'm still in my right arm when using the mouse. I hope I have explained well enough details.

  If it's in the wrong place, please move to a better place.

  Thank you

  Lee

  I don't know of any registry value, but you can use the key sequence to "Save as jpg.

  ALT

  F

  V

  J

  The F key may be pressed simultaneously with the ALT key or after him.

  You can reduce the number of keys to just ALT plus a digital key by using the following, adapted from one method described HERE.   Setup is much easier with a mouse, but can be done using the keyboard only.  I showed you the controls and mouse shortcuts keyboard to add an icon "" Save as JPG"to the Quick Access toolbar.

  Open Paint

  Mouse	Keyboard equivalent
  Click on the file Menu (upper-left)	Press ALT + F to open the file Menu
  Hover mouse on ' Save as ' to open the list of file types	Press V to view the list of file types
  Right click on JPG to open the context menu	Use the TAB or down arrow key to select JPG and then press SHIFT + F10 to open the context menu
  Click "add to quick access toolbar.	Press A to "add to the Quick Access toolbar.

  At this point, your installation is complete.

  With open Paint, press the ALT key .  This will display the keys associated with various actions.  In my case, "" Save as JPG"icon that has been added to the Quick Access toolbar was the fifth icon (after save, undo, redo and print).  So, to "Save as JPG," I would press ALT+5 (even once, you can press 5 either with or after you press the ALT key).

  

• Change the default language of the system from Spanish to English

  I'm going on a trip and had to buy a new computer to the Mexico.  It came with Windows 7 Edition Home Premium and I tried to change the default language of the Spanish Englishthrough the control panel system, but he would not accept the change.  I don't speak Spanish and you need to use the laptop in the Canada and the United States.  Reading here, it seems that I need to buy Windows 7 Ultimate, however, the only version available is the full version, which is limited to activation in America Latin/Caribbean and she seems to be in Spanish as well.  It'll work for me or what should I do in order to get up and running in English?

  To install a different language - MUI (MUI) - you must have Windows 7 Ultimate. If you do not have Ultimate you can do an Express upgrade to ultimate.

  Anytime Upgrade to Windows 7 Ultimate
  Type of upgrade Express in the box files and research programs in the start menu and click the Windows Anytime Upgrade.  From there, you can buy an Express Windows 7 Ultimate upgrade. Then you can enter your Express Upgrade product key and perform a simple upgrade to Windows 7 Ultimate, this is why you can install a different language.

  If you are in Australia, Belgium, Canada, France, Germany, Italy, Japan, Netherlands, Spain, Sweden, Switzerland, the United Kingdom and the United States, you can use anytime upgrade. If this isn't the case, you will need to buy Windows 7 Ultimate, or buy Windows 7 in the language you need.

  http://Windows.Microsoft.com/en-us/Windows7/products/Windows-Anytime-Upgrade

  Install new MUI (MUI) in Windows 7 Ultimate:

  1. start-> all programs--> Windows Update--> optional updates.
  2. open the optional updates and go to the Windows 7 language packs.
  3. check the MUI (MUI) you want and click OK
  4. proceed to updates

  How to change the display language for Windows 7:

  1. go to start-> Control Panel-> clock, language and region / change the display language
  2. turn the display language in her choose a view list drop-down language.
  3. click on OK
  4. disconnect you before the changes take effect (this will affect only the user profile under which you are logged).

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How can I change the default DVD drive in Windows 7 pro?

  How can I change the default DVD drive in Windows 7 pro?

  The following did not work.
  1 Control Panel / autplay
  It only allows me to choose media player or nothing

  2 Control Panel / default of programs
  -file types associations do not change the automatic boot to DVD drive
  -the default programs watch only with no. microsoft applications add option application
  -access and default computer program; This made a mess when I tried not microsoft!

  3. computer / rt - click the device DVD did not help there is no command 'open with '.

  You might have switched to the control panel view all items.
  Click Start > default programs and click Change AutoPlay settings. -Ramesh Kumar http://www.WindowsValley.com

• Windows Photo Viewer - how to change the default Windows Photo Viewer options so it will open the images directly in 'Real size' rather than the auto zoom

  Windows Photo Viewer - full size

  Hello

  Is there a way to change the default Windows Photo Viewer, so it will open the images directly in 'Real size' rather than the auto zoom?

  Thanks in advance, Yoni.

  Hi Yonikl,
   
  1 let me know the format of the file that is causing the problem?
  2. you have any third party photo editing and look at a software installed on your computer?
  3. do you have any recent software or the hardware changes on your computer?
   
  If there is any third party even software uninstall and check if that helps.
   
  You can follow these steps below to set the image at its actual size while watching.
   
  To display the image at its actual size, click actual size . To make the entire image enters the Windows Photo Viewer window, click on adjust to the window.
   
  For more information you can visit this article for assistance below.
   
  View and use your pictures in Windows Photo Viewer
  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer
   
  You can also try to download and install the Windows Live Photo Gallery and check if the problem persists.
  http://download.live.com/Photogallery
   
  If the problem persists then you can try these steps below to create a new user account and check if the problem persists.
   
  Create a new user profile.
  Now you must create a new user account and check the question of do you need to follow the steps
  below.
  a. open user accounts by clicking the Start button.
  b. click Control Panel.
  c. click on user accounts.
  d. family Safety.
  e. click on user accounts.
  f. click on manage another account.
  g. If you are prompted for an administrator password or confirmation.
  h. type the password or provide confirmation.
  i. click on create a new account.
  j.Type the name you want to assign to the user account.
  k.Click an account type.
  l.Click create an account.
  Now search for the question.
   
  If you still face the question, then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Cannot change the default program for opening .dll

  For some reason any, since I first linked the default program to open files .dll with Visual C++ 2010 Express (which is not truly attempt open, but instead of it gave me a message somewhere near the lines of "File not supported - Type does not open", incidentally) by chance I could not change since. I took a screenshot of the dialog box to try to change (URL below after all), but I noticed that the box was grayed out (the theme I have is a modified version of the classic Windows theme, but on 7, to clarify the operating system). I also tried to select a file after having hit the "Browse" button, but it didn't open anything. I tried several programs in the present to open, much less to change the default value (these are two notable examples): Netbeans - primarily an IDE for Java, but can open binary files even if she's not actually modify them (note: I changed absolutely nothing on any of them even if I has modified it to make it the default program but this problem affects more than just the ones) (, and it did not start until the last default) and Notepad. I went through the 'Open with' dialog box, and this is where I first encountered the problem of it (described above) outside the Control Panel, which it wouldn't let me change the association of file of it in particular, even if I didn't have one of these questions with any other type of file I tried to change, before or after this madness.

  https://docs.Google.com/file/d/0B02h60r9WvJrZ1E5R01xZzJ4akU/edit?USP=sharing

  Hello

  I suggest that you try to restore the system to an earlier point before the issue started and check if it helps.

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• HP OfficeJet Pro 8600 Plus change the default print settings.

  I would like to change the default settings for printing to the project and in grayscale. Is there anyway to do then do not forget to do the changes for each printed page?

  Using Windows XP OS.

  Thank you in advance.

  Hello AllAmerican1347

  If you go to the control panel and printers and fax machines, you should see the printer there. Right-click on the printer and select Properties. If you define the settings here, it should be the global default.

  Tip If you want to print ink black only some printers require that you select black ink only after choosing grayscale.