Change the entries in the configuration of the Wi - fi

Similar Questions

• Programmatically change the Active Configuration results

  I use TestStand 2012 SP1.  I would like to be able to configure the Active Configuration to get results in the process template.  A station in market our sequential model would set sequential reports configuration as the current record while a station running that a batch model would fix the lot of the report as the configuration active.  In addition, if a station can be both, running the application can select the appropriate process template and he would then choose the appropriate reporting configuration.

  I have installation of configurations but need to know how to set the active configuration.  I don't want on a base by sequence, but rather at the level of the process template so that it is executed once and done.  This would allow developers to change their configuration, but still have the lot or creating sequential reports selected according to whether they are working on.

  Thank you.

  There are a few options here:

  1. Replace the ModelOptions plugin and change the setting for ModelPluginConfigurationToLoad to the appropriate configuration.
  
  
  2. Hardcode it in the callback in ModelSupport.seq.  This way if you've always wanted by automatic override features and call their own as they could.
  
  
  3. Hard-code this entry point for execution of Initialize just before the ModelOptions callback is called in ModelSupport.seq.  In this way the customer can always substitute and change it if they want.

  If it were me, I'd go with option 3 for your case.  You can use Parameters.ModelData.ModelType to determine which model they are running with.  Then, simply put Locals.ModelPluginConfigurationToLoad on the proper setup.

  Hope this helps,

• Changing the Configuration off EBS App Tier hosts

  Hello
  
  I have a few questions about to reconfigure an application to TEST system configuration after a clone/backup/restore.
  
  (1) we have three knots on our PRODUCTION file system. Node A - serves the DB level. Node B - is (Conc, Admin and Web server processing) application server and the node is the Application Server (only used for the CFP).
  
  (2) I noticed that during periods of heavy concurrent processing, node C is never used and is almost always at 0-5% usage. Node B, but at these moments is always 95-100% usage.
  
  (3) so I want to make a change in the following manner on the cloned system (and then follow through with the same change on the PRODUCTION system)
  
  (4) I want to assign the node C as the web server only (entry point into the Application)
  
  (5) I then want to assign Node B to the tier of treatment/Admin/applications concurrent server
  
  (6) node A will remain as the tier of DB server.
  
  After completing this configuration (if possible), I will double then the web and server level CP/Admin/Apps using a F5 load balancer.
  
  Is it possible (using the CONTEXT_FILE) for re - configure nodes as indicated on the 4 and 5?
  
  Thanks in advance.

  Also in the new configuration, I set the $APPL_TOP on node B and node C on the test instance and run adcfgclone.pl AppsTier on both nodes after you change the $CONTEXT_FILE?

  Do not set the $APPL_TOP on both nodes, but you don't need to edit the context file after you run the script adcfgclone.pl as the script will prompt you for the services that must be run on each node.

  Thank you
  Hussein

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• Address field is red - a color that is difficult for me to see. Is it possible to use the configuration editor to change the color.

  Apparently a bug in Thunderbird is changing the "To" address to the Red even if the recipient is in my address book. The address is displayed when I start typing the first few letters of the recipient, but the text turns red which is difficult for me to see. I want to continue to enter addresses that I always (first letter type or two) would be the simplest solution to change the color from red to something easier for me to read. I looked in the configuration editor but can't seem to find a key that is appropriate for the address field. Can anyone provide assistance?

  Update to Thunderbird 38.0.1.

• When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings

  Hello

  When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings!

  (Note I recently installed DivX player / converter / movies.. .is this the cause?)

  Then... on desktop... .double click on Mozilla... .loads ok
  Open a new tab..it loads Bing! & I hate it!

  Ive tried;

  1.Tools - options - addons - extensions & plugins - cant see anything there?
  2. On the small address bar (top right) which allows search engines to be managed - all cleared down except google & yahoo
  3. Tools - tab mix plus options - New Tabs - Load on new tabs set to Home Page (doesnt let me change it - greyed out url (conduit.com - see 5 below)
  4. Tools - tab mix plus options - New Tabs - Load on new tabs set to new tab Page - displays the url below (5) but if I try to edit it reverts back every time
  5. If I enter "about:config" & then "browser.newtab.url" in the URL bar I get
  
  browser.newtab.url;http://search.conduit.com/?ctid=CT3321897&octid=EB_ORIGINAL_CTID&SearchSource=69&CUI=&SSPV=&Lay=1&UM=5&UP=SP88BDE404-3DB6-49C4-97F5-96A64775CC57
  
  - rightclick on the selection and type 'reset' IT WONT CHANGE
  
  please can you help me?
  

  Thank you

  Stuart

  I see no mention of the duct. com in your initial post. It is often a good indication that you will taken place unwanted software.

• Toshiba RL900A: Is it possible to change the label of ports of entry?

  Is there a way to choose your own labels for the input ports on the TV series, as the choice of entry provided do not give sufficient device names to identify the sources of signal.

  My previous Toshiba model (32c3000a) has allowed me to develop my own names for ports, which was more useful.

  Also, I am disappointed by the available sound quality and the volume of the built-in speakers, and lack of an exit to counter the problem, the "headphone" in use for a transmitter Infra-red, 'audio external' is therefore not available for "Muting" when silence is desired

  donhe7

  Find a manual for this LCD TV:
  [RL900A user manual | http://www.mytoshiba.com.au/file/download/resource/file/22528/rl900a-3240-english_t1.pdf]

  There are a lot of different parameters that can be set in the menu of TV s but I have found no information how to change the name of the label so I n t think this is possible.

  > Also, I am disappointed by the available sound quality and the volume of the built-in speakers, and lack of an output to counter the problem, the "headphone" in use for an Infra-red transmitter, 'audio external' is therefore not available for "Muting" when silence is desired

  I recommend reading the part of its control (user manual starting on page 23)
  There, you can find details how to change and improve the sound on this TV

• Can not change the configuration extreme airport

  Hello everyone, the community can maybe help me.

  I am a long-time Apple guy and can usually solve my own problems, but this one left me speechless. I have an Airport Extreme ages of less than 1 year. I set up OK and used for the last year. Now, I want to change the configuration. Specifically I add a port to the front, but I also had this problem, try to change the MAC address access lists, changing the wireless channel, allowing access as a guest, and probably any other change in config I try.

  Anyway, once I made the change, not restarting airport but then it fails to return to the top. The yellow light comes on and sometimes the utility Airport told me that he was unable to update the config. In this State I have to pull the plug to restart and once I did, the airport is back re-run without the changes I had made.

  It doesn't matter if I use the Airport 6.3.6 on El Capitan utility or Airport utility on iOS 9.2. The result is always the same. No change, fails to return to the top.

  I did a soft reset a hard reset and a factory reset. I've reconfigured from scratch (several times) and still can't seem to take a successful configuration change. I'm at the end of the ideas. I plan to return it because it's the year is February 2, but I don't want to go through the hassle if I can fix it myself or if it is a known problem that will not change with a change of equipment.

  In any case, here is specific information on the version by any chance, anyone else had this problem or knows a fix:

  Airport Extreme 802.11ac (ME918LL/A)

  Mac OS X 10.11.2

  Airport Utility 6.3.6

  iOS 9.2

  The actual configuration is crucial here.

  We need to know what is the brand and model of the modem?

  Some cable modems are at the origin of the terrible problems... especially the SB series cable modem.

  We should also see some screenshots of your configuration... Summary tab and network...

  We can work from there.

• How can I change the configuration for the output channels analog on a PXI-6704?

  I can't seem to understand how to access the configuration of the channels to the outputs analog (channel 33 and 35) for PXI-6704.

  This piece of test equipment is out of tolerance and must be calibrated.

  I have followed the procedure of calibration http://www.ni.com/pdf/manuals/374081b.pdf, but am getting hung up on step 8, where it is said to repeat steps 4-7 when changing the _cal_ao_current_offset. I can't figure out how to open this channel because it is not listed as a physical channel for step 5.

  I'm using Labview 7.1

  Thank you

  Hello! What you need to do is to add 'Internal channels' to your list of channels, so you can choose the _cal_ao_current_offset or _cal_ao_voltage_offset.  This is done through the drop-down list channel right click and select "I/o name of screening...". ».  There will be a check box that says 'Internal channels' and will provide you with all available internal channels to enter your vi Create Channel.  I have attached some photos illustrating how to do. See you soon!

• all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg

  all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg

  Hi Escapermark,

  Take a look at these articles to the knowledge base, one should set the gray on the problem:

  http://digital.NI.com/public.nsf/allkb/609A763289E6E81D8625739F0052151F

  http://digital.NI.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F

  http://digital.NI.com/public.nsf/allkb/B3D720348D55D0C5862575BA00560908?OpenDocument

• How to change the entries "fill"?

  How to change an entries in the function of auto fill used for forms online? I have recently moved and cannot find where I can change my address on the auto-fill feature.

  In the top of IE click Tools, in the drop-down list, choose Internet Options.In the window that opens, go to the tab "content". On this page, you will see "AutoComplete" with a 'Settings' button. " It is where you can clear AutoComplete history again.

• USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  Once again... Thanks for the tips...

• change the representation of the Golden Gate entries

  Hello

  I have a pair of enums U16 in my code I want to spend in a golden door. Is it possible to change the representation of the U16 GOLD door entry so that I do not need to use a conversion function or the forced to I32?

  Dave

  I don't know why it converts in I32, but if you explicitly convert enums U16, then there is no constraint, and the output is U16. The value should not be changed, because enums are already U16.

• DSC: IO custom Server: on the change of entry

  I wrote a custom server IO VI using the DSC Module.  Using NI DSM, I see the server status is 'Active '.

  Once again using DSM, I change the value of the control which is supposed to trigger the VI to run, but it does not run.

  What Miss me?  I managed to create several periodic servers custom, but it is my first "on entry changes.

  Note: I do not use 'notification of change in value of the shared variable' in this entry change VI, because 4 of the DSC training lesson leads me to believe that the mechanism is not necessary.

  Someone at - it examples of both types of custom servers?

  Thank you

  Well, I got it to work.  Got a new server very simple working code.  Then removed original project, recreated library IO server from scratch, added back into a project, and now it works.

  Still, I'd like to see examples of both types of customized servers to see how to handle error conditions. Lesson four said "make sure that VI is robust enough to handle/recover from the error, but does not give examples."

• Changed the domain to a different workgroup name cannot entry windows more.

  My colleague from the Spain has a laptop and set a domain name, that is using at the office before Spain. Now, he came to the office of HK and changed the domain to another name of working group, after reboot, cannot entry the windows even more put the same username and password. What I entered the windows and edit them again?

  Hi MikeChui,

  You must have administrative privileges to change the computer from a domain to a workgroup. I suggest you to contact the administrator of the help system.

  However, you can also ask your question in the TechNet Windows XP Networking forum

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do you change the configuration of the drive in the bios with the master and slave?

  When I bought my Dell Dimension 8300 several years ago, I had installed a DVD player and a CD + RW drive and a floppy drive installed in the system.  Very early the system crashed and the OS discs had to be reinstalled.  The Tech is frustrated and accompanied me by changing the master/slave in the bios.  My DVD player is now the master and my CD + RW is now slave.  My cd burner and DVD player play, but they do not burn or import music.  I was wondering if the fact of change that might help the problem with the stopping cd burner just in the middle of a burn error 4450 or ((0X00001162).)  Thanks for your help.

  Hello
  If you are referring to the sequence of boot Yes the bios is where you want to change it see this url http://helpdeskgeek.com/how-to/change-boot-order-xp-vista/ ... . If you are referring to master vs. slave then that is something else see this url http://www.scribd.com/doc/96827/Master-Slave-Configuration access http://support.microsoft.com/default.aspx/kb/283658 Device Manager and check for the x red or yellow?
  itunes error code points? is this correct
  I do not think that it will make a difference to change the devices around, but there's enough information here to know what to do....
  I don't think that changing the order of stertup is going to fix this problem, but again once there is info here to address this issue...
  I would however check the device mgr if there are brands so you can set from the Device Manager and there is news for this
  I think that your problems stem from itunes, if that's the case, it would be best to see if this is the case, however, if the case is you are using windows media player let us know if this post can help solve your problem, please click the mark as answer check on this page THANKS AND GOOD LUCK