Change the RAM 2nd on nc4200

Similar Questions

• Re: How to change the RAM for internal video on the Satellite A665-S5060 card?

  Hello

  My question is how can I change the RAM for my internal video card? I found I only 64 and I want to change it to 256.

  I don't want no heavy games, I just want to change to 256.
  I tried to change it by accessing the BIOS, but I had no luck with it, no option for this, another way, I could do?

  Thank you!.

  Hello

  > my question is how can I change the RAM for my internal video card? I found I only 64 and I want to change it to 256.

  No, you can not do it yourself. The system will automatically change to the need for more ram.

• Can I change the RAM available on a virtual machine without having to reboot?

  I would like to know if there is an option to change the RAM available on a virtual machine without restarting the virtual machine. I saw this old news item that says that it is

  possible (http://news.cnet.com/8301-1001_3-10044031-92.html), but I don't know how to do it. Any suggestions?

  Thanks in advance.

  Arne post, called PowerCLI: toggle the function add Hot VMs, shows how.

• E420: Change the RAM Voltage in the BIOS

  I just installed two new modules of memory (4 GB), but my laptop recognizes only one of them. I tried to research on how to change RAM voltage in the BIOS to see if that will allow the laptop to recognize the bars of memory, but can not find a way to do.

  Can someone please advise on how to change the RAM voltage in the BIOS (specifically from 1, 5V to 1.6V). Thank you.

  the RAM voltage can be changed in the BIOS. ThinkPad does not offer this possibility.

• Tecra A10 - how to change the RAM?

  Hello

  I was wondering I just bought a new Toshiba Tecra A10, I just wondered how the change of the RAM, it comes with 1 GB of Ram I want upgraded to 2 GB or 4 GB.

  The RAM slots are located at the rear of the Machine or below the keyboard?

  Any help will be appreciated.

  Thank you.

  Hello

  Memory module compartment is placed at the bottom of the unit.
  You can remove the screw clean the lid in plastic and then you will be able to remove this cover and access locations of memory.

  AFAIK, you can upgrade the memory for max 8GB (2 x 4 GB), but it's not necessary you can upgrade to 4 GB RAM and it is more than enough

  Welcome them

• XC651PA: Change the RAM in the computer hp laptop

  I have a hp pavilion DM4-1024TX entertainment series laptop with 3 GB of ram built-in, but my pc has begun trolling due that I started thinking about the change/upgrade my Ram 8 GB capacity with Corsair 8 gb ram 1600 Mhz ddr3l 1.35v. My question is that my product page says I can go to 8 GB of DDR3 ram, so is there a difference between DDR3 and DDR3L

  Configuration?

  and is there a way I can speed up my system too.

  and in addition, my pc crashed a few months which resulted in my 500GB internal hard drive space to reduce to a minimum of 80-90 GB. Can I recover these lost too much space?

  Concerning

  Hello @Shaurya_mittal

  Here are the specs of your computer

  Link: http://h10032.www1.hp.com/ctg/Manual/c03106715

  page: 10 in the PDF Online.

  But also here.

  2 SODIMM slots

  Customer-accessible and scalable

  Supports up to 8 GB of memory system

  DDR3 memory, 1066 MHz, dual-channel (DDR3 1333 MHz demoted in DDR3 1066 MHz

  Supports the following configurations:

  8 GB (4 GB X 2)

  6 GB (2 GB X 2 + 4 GB + 1).

  4 GB (2 GB x 2 or 4 GBx1)

  3 GB (1 GB × 1 + 2 GB X 1)

  2 GB (2 x 1 GB) or 2 GB (1 GB x 2)

  1 GB (1 GB X 1)

  Hope this helps you.

  BR

• How do I change the ram on a Phoenix h9-1170 settings

  How will we change ram settings for our new RAM on a Phoenix h9-1170.  It reads as 1333 when he is listed as 1600 on the box, system on the website specs say 1600 RAM can also be used. I have JUST the PLEASE READ WHAT 1600, but its it shows like 1333.

  Thanks for your help.  I'll try it later because its in a place where my big sausage fingers have a hard time to reach.

• Change the Ram in a Lenovo R60

  Hello

  How can I change RAM in my Lenovo? I'm not sure of the location.

  Help, please!

  Bent (Denmark)

  Welcome here!

  Please look at these pretty video instructions here.

  Click on the left site, the books button and choose your model.

• Change the SSD or RAM in Portege Z10t?

  Hello

  As we know that it is very easy to change the RAM memory or the Portégé R700-930 series SSD drive.
  It's a little more complicated for the Z series.

  I just wanted to know if this is possible for the new series of Z10t?
  The standard elements of 4G and 128G are a bit small for my taste.

  Thank you
  / Anders

  Hello

  I think the upgrade on Portege Z10T is another story and not comparable with other series such as Portege R700.

  The Portege Z10T is a mixture of Tablet / netbook device and mSATA SSD drive is placed within the tablet that is not upgraded to the user.

  If 128GB are not enough for you, you can insert and use the extra memory media into the SD card slot

• Compaq 6720 s: changing the settings of the Ram in HP Compaq 6720 s. Possible?

  It says that my phone can have up to 4 GB of ram.
  
  I am aware ran sticke must be correct and the same thing.
  
  My question is;
  
  Is it possible to change the ram settings in the Bios?
  
  Thank you
  
  dvtrv

  You answered my question.
  
  Thank you

• change the physical RAM on the host

  Are the necessary configuration changes when you change the RAM phsical on ESXI hosts? The customer asked to spend 72GO on each host of 96 GB. ESXI and Vcenter host automatically detect the update?

  Nothing special, host and vCenter server automatically detects the changes.

• HP dv8: when I change the screen map black mother

  Hello, my pc model is hp dv8.it have a problem on the power button is not open.then I try to change again motherboard.but there a problem.it opens, but showing black commandes.sur not my motherboard is 573758 - 001.and now, I use 591382 - 001.i might think motherboard problem, but im not sure.so can u give me a solution?

  I do this solutions-

  1 change the ram

  2 bios reset 60 sec

  3. try a different monitor

  You have questions that are beyond the scope of this forum.

  You have changed a systemboard and used the wrong part number. The motherboard you have used is for a computer laptop touchsmart dv8t, not a computer laptop dv8. This makes the troubleshooting your own question, because there are so many things that you have not made correctly.  If your laptop was not the touchsmart dv8t model, then there is a problem with the connector that connects the LCD screen and the motherboard. This is probably your biggest problem is.

  What is the number of complete product or the name of the product from your laptop?

  DV8 is a series of models which includes a portable, including version touchsmart allowed that you have installed.

  

• Replace the RAM memory on TOSHIBA NB510

  Hello

  I just bought a Toshiba NB 510 - 10 d and I just can't find where should I change the RAM memory.

  Can someone help me?

  Thank you!

  Hello

  I found beautiful film from YouTube how to replace the RAM for Toshiba NB500, NB520, NB550D series
  http://www.YouTube.com/watch?v=6mnQQbladnA

  Select this check box.
  Remove the plastic cover at the bottom of the unit you will see the HARD disk and the memory modules. Spread the latches to lock two memory so that the module memory will appear. Pull the module from memory, and on an angle, using care not to touch the connectors. Remove the memory module.

  All that s.

• Re: Can Satellite A200-14 - I switch the RAM to 4 GB?

  1. my laptop "Satellite A200-14" series has 2.048 MB RAM. How much does it cost to improve to 4,096 MB RAM?
  2. can you change the RAM yourself?

  Thank you
  Johannes

  Hello!

  I put t know how much it costs to upgrade to 4 GB of RAM. This according to the modules that you can buy and where buy you it.
  Upgrade the RAM, you need modules with DDR2 (667 MHZ) specification.

  And change the RAM is quite easy. Consult your user manual, you can find instructions and pictures how to do this. ;)

  Good bye

• Reduce the RAM from 4 GB to 2 GB

  Original title: "change the RAM"

  to install "lego racers 2', I saw advice to reduce the RAM of 4 GB to 2 GB, install, then increase the RAM to 4 GB. How can I do this and are there any risks involved?

  Had to hop in this one, too much outside the walls, not to do!

  LEGO Racers 2 is an older title, looks like it was released in 2001. This is the page for Windows Vista compatibility:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=software&p=LEGO%20Racer%201%262&v=ValuSoft&UID=&pf=0&PI=0&s=LEGO%20racers%202&OS=32-bit

  Doesn't look as if it were entirely consistent. I found the thread (warning: third-party Web site) Dominic refers to the good. It seems that when users have more than 2 GB of RAM and try installing the game, Setup returns with an error "not enough memory". When they get out a stick of RAM and get up to 2 GB or less, he moved very well. After that they can reinstall the RAM and the game will play very well.

  My best advice is to contact the manufacturer of your system using Add/Remove RAM since the steps differ by the system. If you can provide your system and the model, I'm sure we could find the manual for you, or at least get you pointed in the right direction. But all-in-all, I see no problem temporarily remove little RAM to get the game installed. Just be sure to put yourself in the Earth (by entering the metal case) before touching any components and you should be fine.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.