Change to the vCAC device certificate - is this possible?

Sorry for the long post, but I wanted to be as detailed as possible.

I have to do something terribly wrong with this because I can´t see where´s the problem.

I created a Microsoft CA and created the model suite VMware KB 2062108 (VMware KB: creating a model of certificate authority Microsoft for the creation of SSL certificate in vSphere 5.x ).

With this, I was able to successfully complete the certificate for the following applications:

-vSphere 5.5 (vCenter and ESXi);

-View of the horizon (connecting to the server, security server, and composer).

Now with vCAC:

-vCAC 6.1;

-Using vCenter SSO;

I followed the "vCloud Automation Center 6 certificates A to Z" article (vCloud Automation Center 6 certificates A to Z |) VMware Consulting Blog - Blogs of VMware) for the creation and replacement of the certificate of App vCAC.

The change was apparently with success since:

-When I go to https:// < vcac_FQDN > / vcac it shows the correct certificate;

-My Don t of browsers complain.

Unfortunetly, I misspoke unfortunately :-(

When I wen to configure SSO in vCAC, he would show me a message saying that the certificate of vCenter was not reliable. I have didn t worth actually much since configuration is complete anyway.

The main problem was the following. Once I tried to access the portal using [email protected], she would throw me a message saying:

"Failed to connect. Please contact your system administrator and report error < CODE > code"(code for each attempt changes)

VCAC admin, I see the service "shell-ui-app" with a "FAILED" status and a glance in catalina.out (using the code provided above) told me this:

Vcac: [component = "coffee: shell" priority = "ERROR" thread = "tomcat http - 17 ' holding ="vsphere.local"] com.vmware.vcac.authentication.http.LoginErrorEntryPoint.commence:82 - Exception with error code rO4WY + ug:

org.springframework.security.authentication.BadCredentialsException: cannot authenticate the user, without credentials have been provided

Well, that was a weird message. But what makes it most called my attention was something written above, I noticed was repeating all the time:

Certificates not approved with serial number: [< big_number >] and the thumbprint: [< big_hexa >]

Certificates not approved with serial number: [< another_big_number >] and the thumbprint: [< another_big_hexa >]

I checked and this is exactly the certificate that I assigned to vCAC and root certificate of the CA.

Thinking that the problem was caused because the vCAC App won´t trust my certificate authority root, I tried to force a little. I found 2 keystore:

-/etc/vcac/vcac.keystore

-/ usr/java/jre-vmware/lib/security/cacerts

I ran a ""keytool-list - v - keystore "in two of them and I noticed that indeed my luckily to CA within the. "

Therefore, I made a "'keytool-import-trustcacerts-file < CA_certificate > - < My_CA_Alias > alias - keystore". "

Another audit confirmed that, now, the certificate was in the keystore. Restarted the device.

And so far the certificates remain unreliable. Really, what I am doing wrong? :-(

And now the last update.

As something that already happened a few times, it just started to work on its own.

(1) I changed the device identity and vCAC with CA-signed certificates.

(2) for the vCAC SSO breast device configuration, the untrusted certificates message appeared.

(3) original problem appeared;

(4) manually import my certificate of the CA root within both cacerts and vcac.keystore within the device files vCAC.

(5) restarted everything;

(6) problem;

(7) abandoned and changed all to Self-signed;

(8) vCAC sharp device to vCenter SSO;

(9) the message of untrusted certificates did NOT appear;

(10) on the unit to CA-signed certificate;

(11) restarted;

(12) it s work.

Go figure.

Tags: VMware

Similar Questions

  • One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

    Original title: USB device not recognized

    Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

    Hello

    (1) is the specific question of specific USB devices?
    (2) did you of recent changes to the computer before the show?
    (3) have you tried plugging the USB stick on another computer?

    (4) what is the brand and model of the computer?

    I suggest to refer to the following methods and check if it helps to solve the problem.

    Method 1: Hardware devices do not work or are not detected in Windows

    Run Microsoft Fixit mentioned in the article.

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2: USB Port may stop working after you remove or insert a USB device

    http://support.Microsoft.com/kb/817900

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

    Reference:--

    Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

  • Error - "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

    Original title: USB device not recognized / dysfunction

    "Unrecognized USB device".
    One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. Help for this problem, click this message. »

    This is what I get AFTER that I had to reinstall windows XP because a virus has attacked my computer a little before avg and Microsoft security essentials picked it up and destroyed... I have reinstalled twice... then I changed discs since I have two... well, I get this message from my 2 external Seagate Freeagent and my Phillips mp3 go gear aria... player these devices work on the laptop from my friend and she is under vista. It seems that since then they have worked on my computer before they would always run. My mouse and my cam work fine and my Canon printer gets thus detected... a few readers who have the space that is made... Ive looked everywhere for a solution... even upgraded windows media 11 and is player went to service pack 3. restarted several times... tried dPower Management tab and tried to

    Open recognition of the USB device by using Device Manager.

    .. I am at a loss: P please help thanks!

    isable the power management of the USB hub and I couldn't find the

    Hi LadyDefi,

    You can try to uninstall and reinstall the USB controllers and check:

    To remove and reinstall all USB controllers, follow these steps:

    a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.

    b. click on the Hardware tab.

    c. click the Device Manager button.

    d. expand Bus USB controllers.

    e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    f. restart the computer and reinstall the USB controllers.

    g. plug in the removable USB storage device and test to make sure that the problem is solved

    For more information, see the following article:

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

    Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

    I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

    How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

    Hi LOliver,

    Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

    Method 3: Connect the printer to a different USB port and check.

    Method 4: Reinstall the USB (Universal Serial Bus) controllers.

     First of all, please disconnect all USB devices and then perform the following steps:

    (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

    (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

    (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

     

    Then, restart your computer and windows will automatically reinstall all USB controllers.

     

    HP printer drivers- ensure that you download the driver appropriate for your device model package.

     

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error: One of the USB devices attached to this system has malfunctioned, and windows does not recognize it.

    tried already everything written here. When I plug my USB device (3 of them) my Windows a sad of the USB devices attached to this system has malfunctioned, and windows does not recognize it. I tried plugging it into another winXP machine, it won't work. Can you help me?

    Original title: usb malfunction

    His salvation,

    Thanks for posting your query in Microsoft Community Forum.

    1. What are the troubleshooting steps you have tried so far?
    2. If it works much earlier? If so, did you do changes on the computer before this problem?
    3. What type of USB device you are using?

    As you mentioned that the USB device does not work when plugged into a WinXP machine, it may be a problem with the device itself. In addition, the question may also arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows.

    Therefore, I suggest you try the following methods (skip the ones that you already tried) and check if the problem persists.

    Method 1:

    Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

    If method 1 does not work, try Method 2.

    Method 2:

    Remove and reinstall all USB controllers.

    1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. In the list of the categories of equipment, locate and expand Bus USB controllers.
    3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
    4. Restart the computer and let the USB controllers get reinstalled.
    5. Plug in the removable USB device and test to make sure that the problem is solved.

    If the problem persists, go to method 3.

    Method 3:

    This method will install the latest drivers from device to your USB device.

    1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
    2. Click find updates. When the scan finished, click optional review updates.
    3. Click the check box next to the update, and then click install updates.
    4. If you are prompted, read the license agreement, then click I agree.
    5. Follow the instructions on the screen to download and install updates.
    6. If you are prompted, restart your computer.

    More information: Update a hardware driver that is not working properly

    If the device fails after updating the driver, you can try to roll back the driver with its previous version.

    Restore a driver with its previous version

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

    I get the following message when I join my computr "one of the usb devices attached to this computer has malfunctioned and windows does not recognize," my nokia C3
    kindly help

    Most often when a device is not it's because of a driver.  Try reinstalling your.

    It works for win 7 & 8

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

  • received message one of the usb devices attached to this computer has malfunctioned - help please

    I received the error message one of the usb devices attached to this computer has malfuctioned and windows does not recognize.  I removed the hub and got the same message when using devices directly into the computer.  I tested the devices on another computer and why have been recognized without problems.  I tried all the patches as in Device Manager, looking for the software upgrades etc.  Suspect that this has happened when a member of the family visit charge pictures from a flash drive to update his facebook site - I do not know if all programs have been loaded to remove/uninstall but do not know that it would have been the 26th Dec - please help

    Hello Ann,.

    If it is a laptop computer, shut down Windows and remove the battery and the power supply of the PC.

    Wait a few minutes, and then reconnect the battery and start Windows.

    Plugin your device to see if it works, without the hub.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error "one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." when you connect Logitech M225

    Original title:

    My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.

    I get a windows notification that says-

    "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."

    I have Vista 32 bit OS on my laptop.

    My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.

    I tried to look for a download of update on the site of Logitech & only found:

    6.32.20 set - point it did nothing to help.

    I also tried to move the receiver to the other 2 ports USB w / still the same results.

    Are there other downloads or solutions that will help w / this problem?

    You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.

    Also try the steps below to reset the power of USB:
    (a) the laptop off, unplugged from the wall outlet.
    (b) remove the battery for a few minutes, then reinstall it.
    (c) then restart the laptop.

  • Error USB 'one of the USB devices attached to this computer has malfunctioned'

    Original title: Problem USB on Vista 32 bit.

    I have a 32-bit vista when I pug anything anyone posts USB the same message comes up saying one of the USB devices attached to this computer has malfunctioned and windows does not recognize it. Can someone please advise?

    Hello
     
    Method 1:
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2:

  • Computer say one of the usb devices attached to this computer has malfunctioned

    Original title: LYNDA CROSKILL

    Why my computer says one of the usb devices attached to this computer has malfunctioned and windows does not recognize it when I try to install a new printer? I use windows 7

    a few suggestions here:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/USB-device-not-recognized-in-Windows-7/8106a712-A13E-4ca5-b82e-c3961cc254b1

  • "One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it." Why it does not recognize my device?

    Some time ago I had a huge problem with my computer (I think that my mother-in-law accidentally downloaded a virus) and I took it to a repair shop where they wiped out completely and replaced the hard drive.  Since I got it back when I try to use my wireless mouse and plug the nano receiver he said 'one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  Why he says this?  And what can I do about it if anything?  I already tried uninstalling the driver and reinstalling, but that did not work because as soon as I plugged it it again once he says the same thing.  So I don't know what is happening or how to fix it.  Please help me!

    Hi Carla,.

    Please go to the Microsoft Community Forums.
    After the description of the question, I understand that you can not use the mouse on the computer wireless.
    Let me go ahead and help you to question
     
    What is the brand and model of the mouse?
     

    Here are some ways you can follow to resolve the problem:

    Method 1:
    Try to connect to other USB port and verify.
     
    Method 2:
    I suggest for the link and follow the steps in the article:
    Troubleshoot a wireless mouse that does not correctly
     
    Method 3:
    Remove and reinstall all USB controllers
    Follow these steps:

    a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

    b. click on the hardware tab.

    c. click the Device Manager button.

    d. expand Bus USB controllers.

    e. right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

    f. restart the computer and reinstall the USB controllers.

    g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.


    I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

  • I accidentally installed the Illustrator CC 2015 update and want to return to the CC2014 version. Is this possible and if so, how?

    I accidentally installed the Illustrator CC 2015 update and want to return to the CC2014 version. Is this possible and if so, how? The interface has changed to a level that it costs me much too much time to adjust when facing a deadline. Any help much appreciated.

    Hi Don,

    Please see this link to install versions of Creative Cloud 2014:

    Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

    Let me know if it helps.

    Kind regards

    Megha Rawat

  • Since the update for Firefox 4, I am no longer offers the possibility to save the tabs when closing making it much faster to access these sites when starting the next day. Why this possibility has been removed? It's a favorite feature.

    Since the update for Firefox 4, I offer more the ability to save tabs on shutdown - makes more rapid access to these sites when commissioning the next day. Why this possibility has been removed? It was a feature favorite and saved a lot of time.

    Firefox 4 records the previous session.

    You can use "Firefox > history > restore previous Session" for the previous session.

    There is also a button 'Restore previous Session' on the default on: Home home page.

    Another possibility is to use:

    • Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.

    You can set the preferences of warning on the topic: config page true via the context menu or toggle the value with a double click of the left.

    To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.

    If you see a warning then you can confirm that you want to access this page.

  • I bought a laptop tailor-made and it turns out that there is a counterfeit Windows xp version. I want to upgrade to windows 7 instead of buy the version xp again. is this possible?

    I bought a laptop tailor-made and it turns out that there is a counterfeit Windows xp version. I want to upgrade to windows 7 instead of buy the version xp again. is this possible?

    You will need to purchase a full commercial copy of Windows 7 and do a clean install. You cannot use a Windows XP hacked as an operating system that you are eligible for an upgrade. Make sure that there are Windows 7 drivers for the hardware of the laptop. MS - MVP - Elephant Boy computers - don't panic!

  • My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

    My laptop was stolen. The CreativeSuite has been installed. I also have programs on my Mac work in the office. When I buy a new laptop, I have to install the programs on the third computer. Is this possible? What can I do?

    Hello

    You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it on one at a time.

    For deactivation refer:- https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

    If you do not have access to your old computer because you have replaced a hard drive, upgraded your operating system to format your computer before you deactivate your software or your computer is dead, you can ask Adobe Support to help you disable from a machine, you cannot access. Have your serial number or Adobe ID ready, then contact us.

    To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.

    You can also see: -.

    https://helpx.Adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

Maybe you are looking for