Channel in color Panel

Similar Questions

• The color Panel offers only cursors in grayscale

  I followed one of the Deke turtorials, and included using the color Panel. When I went to the window/color, I've only available gray slider. The others are all grayed out. I don't think I changed anything which would have had an impact on this, but I don't know.

  Suggestions for other available file cursors?

  Barry

  At the time you access this Panel, you have a channel current color, or maybe a layer mask?  Make sure that you click the icon on the left (that is, to make the image color the current focus of operations) in the layer of the image in your LAYERS Panel.

  -Christmas

• My color Panel thinks it knows better than me. : r

  Hiya there!

  This could turn into a bug report, I don't know. I really hope that I have not asked a question to repeat.

  For some time I use Photoshop CC thingy color Panel perfectly well with my good 2010 ol ' Bamboo Wacom tablet... but on all 5-6 change of color that I do with the stylus (maybe more often, it's frustrating often), the color will snap back to the original color, I already had, or I think it snaps to a different color is along a path where my cursor may travel before coming to a stop. I have not really well, evaluated according to me, but it's a little erratic.

  Fortunately, he does not have it with my mouse, but he do when my stylus pressure is less than some sort of threshold... I think so. If I start to drop on the pressure, even if I keep technically a click when searching for this color I want up and down the Tint slider, which makes any component snap by little I didn't have color. , But it would make sense then why the mouse never fails: it has two speeds of pressure: 0 to maximum.

  I recently changed the "tip feel" my pen stylus via the preferences of bamboo, but when I changed them back again to see if this is what caused the problem, it doesn't seem to make a difference. Any way I have it.

  I have also upgraded to Windows 7 to 10 32 Bit and also changed the resolution on my monitor, but I really doubt it would be the source of the problem.

  I have 2 Coolorus as replacement of a dandy, but it takes a while to start, and there are some "sticky lag" when using the stylus, make it harder for more fine adjustments on the wheel itself, but I digress.

  Anyway, does anyone have an idea how to fix this?

  
  See you soon,.

  Jon

  The only time where he should align, it's when the web colors is enabled. But then you'd see obvious color instead of a gradient changes.

  Have you tried to update the video driver, driver of the Tablet? If this does not help, try to reset the preferences. Ctrl alt shift at the same time as Photoshop starts.

• Channels in the Panel layers appear reversed when they are not

  My layers in Photoshop CC Panel have suddenly started to display all reverse channels, when they are selected and reused for example in the form of mask in the layers panel, they appear correctly. Maybe I've changed inadvertently in some settings to make this odd behavior, but I really want that back in a useful way. Any ideas appreciated. Below you can see a screen shot of how the alpha even looks in the channels of the panels and layers.

  

  When you double-click on the channel in the Panel layers, what are the Options of channel parameters?

• How can I add lut to the lists in the new color Panel

  Is it possible to customize the list of read?  Release n the new 2015 CC, I wish I could add resembles the dropdown lists that appear in the color Panel.

  I have a lot of looks in different formats that I downloaded on my PC.  I know that I can navigate to them from the color Panel, but I would like to permanently add to the drop-down list so I can choose quickly between them.

  Is there a way to do this?  I tried to copy and paste the downloaded files in the same folder that the looks that are already listed.  This adds the new looks to the LUT under Basic Correction entry list, but not the list of Look under Creative, and it would be nice to make them appear under both.

  In addition, it would be even better to also remove lut that I won't use.

  I hope this question makes sense!

  addition of LUT Lumetri color? Adobe community

• Problem of base color Panel

  Hi just noticed my colors are missing from my base color Panel. Bars and sliders are all white? Someone knows how to solve? The image helps to explain my problem? Sorry it came out on the side! Oops!

  Post edited by: zabmm3 added image

  You're almost certainly using OS X 10.9 Mavericks and running Lightroom 5.0.

  Update of Lightroom 5.2 or 5.3.

  That should fix it.

  Tony Jay

• Color Panel

  I am more able to access my color Panel in InDesign CS 5.5. It is just grayed out. I can switch to the sliders, but can't access it either. No idea why this is happening?

  Change your preferences

• How to set the STL as "Color Panel" method of collection of default?

  I prefer HSB for picking colors, if I'm in CMYK or RGB, but my choice does not stick. I'm changing it back to HSB. Is it possible to force the STL to be default in the color Panel?

  Thank you.

  Unfortunately, no.

  He always wants to go back to the color mode of the document. Nothing you can do about it.

• Channel indicator color

  Hi guys I want to know if it is possible to change the color of the indicator chain twice according to the entry. For example, on the same channel indicator, I want the color red when the result of the test is False and green when the test is successful. Is this possible?

  Try this...

• "Surface of third-party control" support in Lumetri color Panel?

  The release notes for the new version of first points for this entry in the online manual of the first, which means that Lumetri can support "third-party control surfaces", set apart from the signs of the element of the tangent:

  https://helpx.Adobe.com/Premiere-Pro/using/color-workflows.html#ControlSurfaceSupportforLu metriColor

  This in fact means that, for example, JLCooper could support the Lumetri effect with the Eclipse CX panels, but it would be their responsibility to develop the interface it?

  I'm not clear on the question of whether '3rd party' controls support surface is only limited to tangent panels or not?

  HI Mel,

  Yes, third party can develop plug-ins so that their equipment can integrate with Premiere Pro using the API of the control Surface.

  Paddle gear is a third-party that provides a control surface plugin for Premiere Pro.

• Lumetri Color Panel not showing fixed base

  Hello

  I updated PremiereCC to date and take advantage of the color of lumetri, but suddenly the basis of correction of the Panel part does not appear even if it is checked. Ive updated, closed Panel and opened, checked and unchecked the pane, undocked the Panel and make the full screen.  When I click on the bar of "Basic Correction" real in the Lumetri Panel, he describes the options for probably a millisecond but him disappear.

  I don't know what the problem is, is there a way to reset the panels as you can reset tools in other adobe programs? Or maybe clear my cache?

  Best,

  Parker

  [transferred to Premiere Pro]

  two suggestions of "another thread with a similar problem" had to "solo mode - in lumetri color dropdown Panel ' and the other was to"restart the computer and launch the first while resetting preferences.

  What happens when you hold the control by clicking on (but I suspect that you have Mac - if command) - I hold control while clicking on, all the panels lumetri open (or close). Not that this will solve your problem, but strange that your other options lumetri are open and will remain open, but your basic correction is closed and remains closed. Holding control while clicking on not done anything to any of the lumetri options?

• Change RGB to CMYK color Panel

  Dear Indesign scripting,

  I wonder if there is a script of hollow so that the Panel color in Indesign CS5 can switch from RGB to CMYK

  Of this:

  

  To do this:

  

  Greetings.

  Hi beh_gras_beh

  app.menuActions.itemByID (29189) .invoke)

  Will add a CMYK color without a name who will do the work for you and won't cost you a color without a name (thanks to Jareck that about 25 here Re: coloring a font with a RGB, etc. without adding color in the color chart document.)

  There might be an another menu item to use, but I have my doubts.

  Concerning

  Trevor

• Question of color Panel (CS4)

  It's more of a thing of curiosity to mission-critical, but this is:

  If you have a color, as you know, it appears in the Panel of color with a slider to adjust the tint. You can click the CMYK icon to show the distribution in four colors.

  But is it possible to return to the display of the cursor?

  Click on the swatch in the swatch Panel and it will give you the back sliders.

• Select the physical channels of front panel

  Hi all

  Currently, I am trying to build an execuatble file which is dummy proof and has variations of the application is available.  I'm currently trying to give the user the opportunity to select the physical channels of the façade, through a group of check boxes or buttons... etc.  Then I have an array of strings containing all the names of the channels. I tried to run it through a loop with a structure of business inside and what false, the column of the table would be removed.  Instead, I get a blank table column, what does not work when he goes to the node of the active channel.

  So in short, how can I remove this column of the table in a loop for?

  Here's a picture of something ive been trying.

  Or is there an easier way to call from the front channels, im all ears.

  Thank you

  
  

• 3, 0-color Panel Action Script error

  Hi all, I'm trying to get the next bit of code work so the user can add a text box, and then change the color and the size of it, but struggling to get the code works...

  btnText.addEventListener (MouseEvent.MOUSE_DOWN, addText);

  function addText(evt:Event):void {}

  var theTextField:TextField = new TextField();

  theTextField.type = TextFieldType.INPUT;

  theTextField.border = true;

  theTextField.x = 10;

  theTextField.y = 10;

  theTextField.multiline = true;

  theTextField.wordWrap = true;

  addChild (theTextField);

  }

  myColPicker.addEventListener (ColorPickerEvent.CHANGE, changeTextFieldColour);

  function changeTextFieldColour(e:ColorPickerEvent):void {}

  trace (myColPicker.selectedColor);

  trace (myColPicker.hexValue);

  var colorInformation:ColorTransform = theTextField.transform.colorTransform;           <---1120: access of undefined property theTextField.

  colorInformation.color = myColPicker.selectedColor;

  theTextField.transform.colorTransform = colorInformation;         <---1120: access of undefined property theTextField.

  }

  This code can help you get what you want:

  import event class required color picker

  Import fl.events.ColorPickerEvent;

  Create an instance of the text box and the text format.

  var theTextField:TextField;

  var newFormat:TextFormat;

  btnText.addEventListener (MouseEvent.MOUSE_DOWN, addText);

  build the text field...

  function addText(evt:MouseEvent):void

  {

  theTextField = new TextField();

  theTextField.type = TextFieldType.INPUT;

  theTextField.border = true;

  theTextField.background = true;

  theTextField.x = 10;

  theTextField.y = 10;

  theTextField.multiline = true;

  theTextField.wordWrap = true;

  addChild (theTextField);

  }

  attach an event listener for the color picker component...

  myColPicker.addEventListener (ColorPickerEvent.CHANGE, changeTextFieldColour);

  the function that runs when a new color is chosen with the color picker...

  function changeTextFieldColour(e:ColorPickerEvent):void

  {

  define a new instance of an object as text

  newFormat = new TextFormat();

  set the text color to the color with the color picker...

  newFormat.color = e.target.selectedColor;

  I added some additional format changes

  newFormat.bold = true;

  newFormat.size = 18;

  say the text field to use this new format

  theTextField.setTextFormat (newFormat);

  }