Question of color Panel (CS4)

Similar Questions

• My color Panel thinks it knows better than me. : r

  Hiya there!

  This could turn into a bug report, I don't know. I really hope that I have not asked a question to repeat.

  For some time I use Photoshop CC thingy color Panel perfectly well with my good 2010 ol ' Bamboo Wacom tablet... but on all 5-6 change of color that I do with the stylus (maybe more often, it's frustrating often), the color will snap back to the original color, I already had, or I think it snaps to a different color is along a path where my cursor may travel before coming to a stop. I have not really well, evaluated according to me, but it's a little erratic.

  Fortunately, he does not have it with my mouse, but he do when my stylus pressure is less than some sort of threshold... I think so. If I start to drop on the pressure, even if I keep technically a click when searching for this color I want up and down the Tint slider, which makes any component snap by little I didn't have color. , But it would make sense then why the mouse never fails: it has two speeds of pressure: 0 to maximum.

  I recently changed the "tip feel" my pen stylus via the preferences of bamboo, but when I changed them back again to see if this is what caused the problem, it doesn't seem to make a difference. Any way I have it.

  I have also upgraded to Windows 7 to 10 32 Bit and also changed the resolution on my monitor, but I really doubt it would be the source of the problem.

  I have 2 Coolorus as replacement of a dandy, but it takes a while to start, and there are some "sticky lag" when using the stylus, make it harder for more fine adjustments on the wheel itself, but I digress.

  Anyway, does anyone have an idea how to fix this?

  
  See you soon,.

  Jon

  The only time where he should align, it's when the web colors is enabled. But then you'd see obvious color instead of a gradient changes.

  Have you tried to update the video driver, driver of the Tablet? If this does not help, try to reset the preferences. Ctrl alt shift at the same time as Photoshop starts.

• How can I add lut to the lists in the new color Panel

  Is it possible to customize the list of read?  Release n the new 2015 CC, I wish I could add resembles the dropdown lists that appear in the color Panel.

  I have a lot of looks in different formats that I downloaded on my PC.  I know that I can navigate to them from the color Panel, but I would like to permanently add to the drop-down list so I can choose quickly between them.

  Is there a way to do this?  I tried to copy and paste the downloaded files in the same folder that the looks that are already listed.  This adds the new looks to the LUT under Basic Correction entry list, but not the list of Look under Creative, and it would be nice to make them appear under both.

  In addition, it would be even better to also remove lut that I won't use.

  I hope this question makes sense!

  addition of LUT Lumetri color? Adobe community

• Problem of base color Panel

  Hi just noticed my colors are missing from my base color Panel. Bars and sliders are all white? Someone knows how to solve? The image helps to explain my problem? Sorry it came out on the side! Oops!

  Post edited by: zabmm3 added image

  You're almost certainly using OS X 10.9 Mavericks and running Lightroom 5.0.

  Update of Lightroom 5.2 or 5.3.

  That should fix it.

  Tony Jay

• Color Panel

  I am more able to access my color Panel in InDesign CS 5.5. It is just grayed out. I can switch to the sliders, but can't access it either. No idea why this is happening?

  Change your preferences

• The color Panel offers only cursors in grayscale

  I followed one of the Deke turtorials, and included using the color Panel. When I went to the window/color, I've only available gray slider. The others are all grayed out. I don't think I changed anything which would have had an impact on this, but I don't know.

  Suggestions for other available file cursors?

  Barry

  At the time you access this Panel, you have a channel current color, or maybe a layer mask?  Make sure that you click the icon on the left (that is, to make the image color the current focus of operations) in the layer of the image in your LAYERS Panel.

  -Christmas

• How to set the STL as "Color Panel" method of collection of default?

  I prefer HSB for picking colors, if I'm in CMYK or RGB, but my choice does not stick. I'm changing it back to HSB. Is it possible to force the STL to be default in the color Panel?

  Thank you.

  Unfortunately, no.

  He always wants to go back to the color mode of the document. Nothing you can do about it.

• CS4 Question of color fill

  Trying to paint for use on a new layer fill color, I get the message that I can't perform this action without rasterize the layer first. When I hit Cancel, it tells me "could not use the can of paint because the content of the layer is not directly editable. The problem is that I don't want pixelation. Specifically, what I want to do is create new color fill layer (say red), allows you to complete with black to create a mask by the Red transparent until with a white brush color over the paint. And, conversely, when using a black brush, red is "erased" and goes back to transparent.

  I did it in CS2 and CS3 without falling on an error. I hope it's just missing me something basic and new in CS4.

  Please let me know if I need to provide more information.

  On the fill color layer, there are two icons: one for the padding on the left and one for the mask on the right. Click on the mask. When the mask is active, it has double lines on the corners like this:

  

  Now, you will be able to fill it with black and achieve what you want.

• Question of color transparent sample CS4

  If anyone can help I would really like to know how I can taste a transparent color.  I'm not talking sampling of the opaque original but the resulting color of transparency on top.  Now the SHIFT with the pipette selects only the opaque color, same result when I double click on the eyedropper tool and pleasant with the settings.

  No direct way I know. You can do this:

  1 rasterize the work; do not use the effect, you must actually object > rasterize, and then undo after

  2. the object of interest to you and to check playback in the color shift-sample Panel

  You can also save the file in PDF format and check the read Acrobat Pro.

• "Surface of third-party control" support in Lumetri color Panel?

  The release notes for the new version of first points for this entry in the online manual of the first, which means that Lumetri can support "third-party control surfaces", set apart from the signs of the element of the tangent:

  https://helpx.Adobe.com/Premiere-Pro/using/color-workflows.html#ControlSurfaceSupportforLu metriColor

  This in fact means that, for example, JLCooper could support the Lumetri effect with the Eclipse CX panels, but it would be their responsibility to develop the interface it?

  I'm not clear on the question of whether '3rd party' controls support surface is only limited to tangent panels or not?

  HI Mel,

  Yes, third party can develop plug-ins so that their equipment can integrate with Premiere Pro using the API of the control Surface.

  Paddle gear is a third-party that provides a control surface plugin for Premiere Pro.

• Newbie question of color management

  Hi people

  using cs4. just finished a CMYK job on a new press. colors on the final print job were pretty loyal to what I saw on my screen when you design, with a few exceptions I want to tweak if possible. I'm new to color management, so looking for some advice.

  According to my research, the right thing to do is to ask a colorsync or icm or icc of my press profile. I did... but my press was a little confused and sent me a bunch of .icc files and I don't know that one to load. people in the press are great people and it's a good press, but I had the feeling that they have not been asked this question a lot. so I ended up using U.S. web coated (swop) v2 profile, which is what they recommended in the end.

  so if I can't get one of my press icc profile, the other approach according to my research wing and adjust the color on my own profile so that what I see on my screen match the printed output. in other words, I take the printed output and hold it up to my screen and manually adjust the color profile settings. I think that this is done in photoshop under edit-> assign the profile and/or edit-> color settings, and then synchronize the color management for all applications using the bridge. Maybe it is possible in indesign? I ask the question on this forum because of the excellent answers that I'll be back here.

  I don't want to screw things up and I'm a newbie with this, then advice out there? My basic situation is that the colors were reasonably loyal but there was a very curious thing where a c = 0, m = 0, y = 35, k = 15 color looked very green on the printed page even if it was a soft yellow on my monitor. I want to try to adjust that.

  Thank you...

  You have a colorimeter and monitor profiling software? It is the starting point of all color management workflow. You also need a pretty good monitor that CAN be calibrated. If the monitor isn't showing you exactly the colors, then nothing do you will to matter.

  Matching the print monitor is an old technique that works only when you have a closed loop where all the work is output on the press even under the same conditions. The purpose of the peripheral use independent publishing spaces, such as Adobe RGB, which is in theory everything correctly calibrated monitor will display the same image, and you can convert any space of output known at the time.

  Terms like watching soft yolks are quite subjective, so I don't know what you expected, but I do not expect 35y, 15 k to be very clear, nor very yellow. While I would not characterize as green color on my monitor, it is certainly not resemble a banana, and beside a clear yellow could be called it greenish in comparison. It's really a yellowish gray clear, in my view.

  I put up a comparison here to see what it looks like, but the colors won't be accurate in a browser.

  

• How to change the text color in CS4

  Hey everybody. I know I'm not comfortable in Dreamweaver, but had DW8 before moving to CS4 and I'm pretty handy with it. In version 8, if I wanted to change a text color, I simply highlighted text and choose a color. No worries.

  However in CS4, I seem to be only have this ability in my CSS, (not the HTML properties) properties. Then, when I try to change the color, it gives me a dialog box asking questions such as 'new CSS', 'for this page only", etc. and I don't understand what I'm supposed to do.

  Can someone tell me in a friendly way (step by step) how to change just one color of text on a page? I went to help and he said to use the color picker, but brings back me to my original problem.

  I'm either something terribly wrong or ADOBE did a simple task in the brain surgery!

  Thanks in advance for the help!

  Mark

  Use an external stylesheet for wide site styles.

  Use CSS for specific styles of the page code.

  Let your only SpryMenu.css.

  Related link.

  Link external style sheets to HTML pages in DW:

  http://ALT-Web.com/demos/DW-link-stylesheet.shtml

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• Channel in color Panel

  My layers panel is in color, instead of n & B tones.  I use Photoshop CC 2015 on windows 10.

  I used the control panel front channel and used different shades of B & W, and now it's suddenly in color, without me (knowingly) change parameter.

  Instead of the usual hues, each channel is in color.  That is to say: the red channel shows the image in shades of red (if clicked individually), instead of a shade B & W.

  I can't work out what I did or how to restore.

  Assuming that the red channel is red, blue is blue:

  Edit > Preferences > Interface

  Uncheck the box next to show channels in color

• Question: CP9: color of the web page outside of the project area.

  CP9, HTML5, output only.

  Hello

  Question: How can I change the color of the web page outside of the project area?

  I want that my projects in 100% white as in example 1.

  I tried changing all kinds of options on the slide master and made sure that both projects have the same settings, but I still get a gray color as in example 2.

  (If the solution is to edit the index.html file or any other file I'm happy about it).

  Any help will be much appreciated.

  Thank you

  Peter.

  Example 1

  This project page is 100% white.

  

  Example 2

  This is another project, but the page outside of the project area is a very pale gray.

  

  Hi Peter,.

  You can change the color of the HTML box around the Captivate project from:

  1. in the menu bar, click themes and select the skin editor.

  2. in the skin Editor window, open the borders page (second means of icon on the left, under the name of skin).

  3. in the theme section, specify the background color of the HTML.

  This solves your question?

• Question of color change?

  Is there a way to change the color of the button in the navigation under Adobe Reader DC Panel bookmarks? I really need to be able to see it, but there is very little difference in color, it is difficult to say if she moves to a page or not? If someone could help me solve this problem, I would be eternally grateful!

  Thank you!!

  Hi amycasey127,

  We are sorry for the inconvenience, as the color of the button Bookmarks panel in the navigation pane cannot be changed. Behavior of its design.

  Kind regards

  Meenakshi