Chckdisc stops at 51% in step 5

Similar Questions

• Stimulus profile stops logging immediately (custom steps)

  Greeting together again! I use the 2012 here all versions (VS TS, LV and tiara), and I also use for TS VS Custom steps. I have a TS main sequence that does all the work of configuration and custom installation via subsequences and steps VS. The only thing I use the profile of Stimulus for connects at this point, and for some reason any resultant TDMS file holds only six data points (record at 100 Hz). It seems that it starts and stops immediately, and I can't understand why.

  The only steps I have in the profile of stimulus steps Start Logging and group channels. There is no step, newspaper stop, so logging should not stop until the TS of the sequences of the project undeplous, as far as I understand it. Triggered trigger Condition logging is set to none, and file segmentation is set to do not Segment.

  Anyone can shed light on what is happening here?

  If I understand correctly, your profile of Stimulus stops almost immediately, because it is call a step to start recording. After that, the profile is done. Is this correct?

• Photoshop CS3: "license for this product has stopped working". Next step?

  When I tried to open the CS3, something that I've owned for years without any problem, I got this message "license for this product has stopped working" now what?

  Error: "License has stopped working". Windows

  Error "Licensing has stopped working". Mac OS

  Mylenium

• The tool brush Flash CC suddenly stops drawing when the step is small

  When you use the Brush tool, I have a problem that will be the race I paint abrupty cut at one point on the screen (about halfway to the bottom of the screen, it does not concern the position of the canvas or the coordinates).  This seems to happen when I have the scene size set to a smaller size (64 x 64 pixels for example).  I was able to reproduce the same behavior on several files and a Windows 8.1 machine and a Windows 7 machine, both using the updated version of Flash CC.  Both machines are double monitor, I'm not sure if that plays a factor.

  To reproduce:

  1. create a new FLA in Flash CC and set the size of the scene to 64 x 64 pixels.

  2. use the Brush tool and try to shoot from the top to the bottom of the screen (zoom level and position on the canvas is okay, as long as your cursor is going to the top of your screen to the bottom of your screen).

  3. the race cuts abruptly Mid-drawing at some point on the screen, about half way down.  You can continue to draw and move to the top, and it reappears when it crosses the barrier again.

  This does not occur if the size of the scene has something bigger (640 x 480, for example).  This also happens in Flash CS5 or CS6 and have noticed only happens in Flash CC.

  What is happening with the mouse to draw and also happened when I tested it on another PC with an attached Wacom tablet.

  Is what is happening to the other institutions, and is at - it a fix for this problem?  (aside, always using a size big stage)

  Hi all

  I want to just inform you that this issue has been resolved internally and even will be available to you as part of the next version of Flash CC.

  Thank you!

  Mohan

• Sequence step results in the report in Simple text format

  I use Teststand 2012 and that you have installed the plugin from model simple text report.

  My main test sequence called a number of subsequences that contain the test steps and contain also several subsequences. A number of the subsequences is only stocks. My test result file contains all the results of measures of test as expected, but it also contains a line of output for each call of sequences - makes it difficult to see the results that count. I would only record the test steps.

  Looking at the code SimpleTextReport.dll in CVI I see it is stepping into the results and updated list in the form of each line (I changed some of the formatting). Is this the right place to filter the levels of appeal of sequence or can I stop the call sequence steps to be added to the list of results?

  You can put it in the sequential model. Just use ProcessModelPostResultListEntry with the same code. If it's in the template, you won't need it in other files. In addition, he is probably already stuff in the model. You'll have to code around it. This is how they do it on the fly.

• TestStand how to change the status of step

  Hi all

  I am a beginner of TestStand.   Now I need to run a simple case: I have 2 Programms Labview (Vi), who operate the same IP address. Each time, only a single Vi can use the IP address.

  I want to do a Teststand sequence, which is step 2, this means that each Vi is a step.

  My question is: if I can do it in Teststand, if I run a vi, then stop or teminate the step, and then run another Vi, so that the two Vi can be launched in Teststand.

  Any response is welcome!

  Hi julyfly,

  I'm sure that the error is not due to the first execution of VI. TestStand retains all the VI that it performs. So when a VI is loaded to TestStand it seems to be running. But it will not. So when the fist VI has finished running it will seem to run since it was loaded in teststand. To clear your doubts, you can try this.

  Go to step first properties-> Run Options-> option Unload you can select unload after step runs. This allows to release the first VI after he ends his execution. So, it will no longer appear to run.

  Thank you

• Blue screen with problem detected - stop 0 x 24

  Running XP Pro, a blue screen came up with the following: a problem has been detected and windows has shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, these steps: disable or uninstall all utility defragmentation or anti-virus disk backup,. Check the configuration of your hard drive and check the updated drivers. Run chkdsk /f to check for hard drive corruption, and then restart your computer. Technical information: * Stop: 0 x 000000024 (0 x 00190203, 0x82f27008, 0xc0000102, 0x00000000).
  Someone has seen this before and can it be resolved? It won't let me run chkdsk or anything. Help, please!

  This error indicates a problem with your filesystem (NTFS).

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, power buttons, remove the battery, etc.). ?

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  .. .and if you do no XP bootable media (or aren't sure you have), here are some additional instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• On Microsoft XP Stop error

  I get a blue error screen pretty frequently. I took down the details of the error several times and it seems to differ slightly each time.

  I used this website http://aumha.org/a/stop.htm and used step 1 in the general troubleshooting of STOP Messages.
  The event viewer displays an error of the system with details as follows:
  Details
  Product: Windows operating system
  ID: 1003
  Source: System error
  Version: 5.2
  Symbolic name: ER_KRNLCRASH_LOG
  Message: Error code %1, %2 parameter %3, parameter3 %4, parameter4 %5 2 1.
  Can you help me what is causing the error?
  Thank you
  Shane Corcoran.

  Hey Shane,

  Take a look at the link of website which explains the resolution of bluescreen errors in win xp.

  http://www.GeeksToGo.com/forum/topic/43519-Windows-XP-blue-screen-of-death-stop-codes/

  Cheers!

• restarting the PC tries to stop for hours, restart keeps on rolling

  tent of the restart but will not restart or stop.

  Hi Willie,

  The question can be generated if open applications are not closed properly before the reboot or shutdown.

  It is recommended to close all the open applications before shutting down the computer, otherwise there could be a delay in closing, or it could not successfully stopped.

  If you notice that your computer seems to shut down slowly (or), start up slowly, or refuse to enter power-saving modes, it may be due to a program or device driver interfering with Windows power settings. You can use the performance information and tools to try to detect these programs or device drivers.

  I suggest you to force your computer to shut down by pressing the power button / stop and follow the steps in the link below.

   

  Why my computer won't turn on or off quickly? :

  http://Windows.Microsoft.com/is-is/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

   

  For reference:

   

  Turn off a computer: frequently asked questions:

  http://Windows.Microsoft.com/en-in/Windows-Vista/turn-off-a-computer-frequently-asked-questions

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• My laptop crashes once I have click on stop or put in hibernation

  Original title: shutdown and hibernation

  I use Vista Home Premium with Dell Inspiron 1545. For these last days, my laptop hang once I have click on stop or hibernation or lid closed and I have to use force to stop. What ability do?

  Hello

  1. did you of recent changes on the computer?

  2. you receive an error message when you try to close session or shut down the computer?

  Method 1

  Check and make sure that the settings here are correct on the computer.

  Change the Sleep button to become a button stop by following these steps:

  (a) click the Start button

  (b) click on Control Panel

  (c) switch to Classic view on the left

  (d) double click on power options

  (e) identify the power plan, then click on "Change Plan settings".

  1. click on change Advance power settings

  (f) under the list, click 'buttons and lid of power '.

  2. click on 'Start Menu Power' the default setting is sleep.

  (g) sleep-click and choose Shut Down

  See also:

  Solve power problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  Method 2

  If the previous step fails, consult in the clean boot state.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

• have printer hp c309, says driver is not found, install disc stops to prepare the system to install, system can't find D:\setup\...\set\hp3prl40.exe...

  Convenience store said that no drivers are

  HP installation disk does not work (stops at the second step, called preparation for installation system)

  but the printer is recognized properly on the wireless network

  only, I don't get the option of making it the default printer

  system says driver not found WSD

  This printer works fine on my computer compaq laptop

  I can't make it work on my new toshiba

  the two win7

  Clean boot the PC http://support.microsoft.com/kb/929135

  Then install from the cd HP

  PS Troubleshooting will not help in these circumstances, other that provide the answer obvious re no driver

• Stop audio after the fact page

  I have a file audio long 60 sec on a page, who plays on the loading of the page. Is there a way to stop when I drag to the next page?

  Of course I could make a button to stop it, but it would be much better if he could stop without this additional step.

  In the media Panel, I checked "Stop on Page Turn", but that has no effect when I saw on iPad (even though I know that it works when I export the project as a .swf file)

  A workaround is to create a dummy audio or video file on the next page.

  http://digitalpublishing.Tumblr.com/post/10540210277/stop-a-video-when-going-to-the-next-p age-in-an-article

• Whence the spam?

  I have a Photosmart 5520 and very occasionally, I used the option of eprint without problems.  I have security set to "Allowed" only email addresses and there are 2 addresses listed - mine and my daughter.

  Yesterday, I received a series of prints that I had not sent and my daughter had not sent.  The HP.com site advises going to print history to determine whence came the prints and, if necessary, block the mailing address.  Unfortunately, is listed.

  I would be grateful for any advice.

  Thank you very much

  Hi RedV68,

  You certainly have the correct settings for e-mail e-print (this is how I have put mine up at home too). After reviewing the specifications of your printer, it leaves a few options.

  1 - is your home network/router wireless WEP key or password WPA on it? If it's an open without security network, someone may have been in the range of your printer and sent there.

  2. is broadcast Liveon? He is a 2nd wireless function built into your printer, and if it is enabled, but without a PIN, it might be available as well at other nearby wireless devices such as cell phones. Here's how a break if off to check this theory - just do the opposite of these measures to stop it:

  First step: turn on wireless HP direct

• Portege R830 - 10 L BSOD during shutdown, reboot, go to sleep and crashed

  My Portege started to plant stopped two days ago. I tried the following:
  -Check that McAfee was updated ok, I tried spybot and superantivirus, couldn't find any threat
  -Check disk ok
  -Follow-up of all Toshiba TEMPRO messages to update the drivers
  -Back to a point of recovery a week ago ok

  Everything works fine, I can use all my programs and Hibernate works well so that... the system wants to close

  Closing the window will not disappear
  The laptop heats up, the fan increases speed and finally the crash with blue screen
  The TI restarts and the cycle starts again

  The only way to stop this process is to keep the power switch for a few seconds

  I ran out of ideas how to solve this problem, suggestions are welcome

  Obviously something blocks regular stops.

  Last step to solve this problem is installation of recovery image. After dong that you will own preinstalled OS and everything will be OK again.

  By the way: until you stop your portable computer check what background processes are active and try to put an end to some of them manually, just to see if the stop is blocked by some of them. If you will be able to know what is the problem here, you can delete some applications or disable any service that may be responsible for this.

  Play a little with it.

• Installed windows 10 64 bit on MBP early 2011, installing the driver software stuck bootcamp

  Installed windows 10 32 bit on MBP early 2011. Bootcamp software support 4.0 installs fine.

  And then upgraded to windows 10 64-bit on the MBP even. But bootcamp software installs ok at first, then gets stuck in the audio driver installation.

  Can someone suggest me the right version of the bootcamp software please?

  Also, I even this problems from yesterday, my macbook pro late 2011 updated for windows 7 64 bit pro at 10 64-bit windows, then all my drivers boot camp work but when upgraded to Windows 10 pro, Setup stopped in audio only step no thing happened, thank you, I need to fix the installation for my mac files because I have more than work on windows today...