ChkDsk does not work properly under Vista
On Toshiba Satellite laptop computer Windows Vista, I have planned a Check Disk to run after reboot. I checked the two boxes (automacticly repair files and scan/repair bad sectors). I restarted the laptop and he appeared as chkdsk would run ok, because I saw this message:
checking file system on C:
The type of ntfs file system
a disk check was schduled
Press any key to cancel
I do not press any key to cancel. But within 5 seconds to start, he said something like: "the disc is OK", then finished checkdisk and restarted windows.
Why not run a full scan? How can I force it to run a full scan?
If you don't mind, would you care to try again?
Use these instructions...
Start button > in the search box, type cmd > look at the top left, right-click on cmd.exe > click on Run As Administrator > press the Enter key.
Now, you will see a black and white screen. It's your cmd window.
At the flashing prompt type this... chkdsk/f/r
It is preferable that you copy and paste that above the line of command to avoid the misspelling. There is a space between 'chkdsk' and ' / '.
Press the Enter key.
The window will say something like... (I'm paraphrasing)... he can't do it now, but it will restart. You want to do, o/n.
Type 'y' as in Yes > press ENTER.
Output of cmd window.
Restart your computer > system will start the disk check.
It will take a while... a long time. Sit back and wait. Do not turn it off.
The system will restart when the disk check is complete.
Tags: Windows
Similar Questions
-
Disk defragmentation is running very slow or does not work properly under Vista
Disk Defragmenter takes a long time (more than 2 hours) and doesn't seem to work properly. I'm not sure what to do or how to report this to get help to fix the problem. Any advice would be appreciated.
Thank you
Diane
* original title - how to solve a problem with the Windows Disk Defragmenter? *
Hello
1st race SFC and CheckDisk to ensure the integrity of disk and file. It is possible that you have something
stop defragmentation run then after that these see the next message.Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlHow to difficulty Chkdsk will not run at startup in Vista
http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html================================
Here are excellent free 3rd defragmenters party which I use.
Very powerful - FREE - MyDefrag
http://www.MyDefrag.com/Defraggler - free - defragment your entire hard drive or individual files - unique in the industry.
This compact and portable Windows application supports NTFS and FAT32 file systems.
http://www.Piriform.com/DefragglerAuslogics Disk Defrag - FREE - works easily and does a great job
http://www.Auslogics.com/en/software/disk-defragAlso check out these and other "related links" here:
How to run Disk Defragmenter from the Vista command prompt
http://www.Vistax64.com/tutorials/81786-Disk-Defragmenter-command-prompt.htmlHow to change the planning for Disk Defragmenter in Vista
http://www.Vistax64.com/tutorials/72832-Disk-Defragmenter.htmlHow to have a task to wake the computer to run in Vista Task Scheduler
http://www.Vistax64.com/tutorials/166809-Task-Scheduler-wake-up-computer.htmlI hope this helps.
-
ATI Graphics Driver does not work properly
All of a sudden when I play my games on Facebook my computer completely freezes. Reports error saying that the ATI Graphics Driver does not work properly.
I have checked all the updates of Windows, said that I installed all available updates. Help, please!Hello
First manually check the updated drivers with ATI and ask their support and Forums on all known
questions. Use the methods to update the following drivers.Download the Catalyst Drivers here
http://game.AMD.com/us-en/drivers_catalyst.aspxATI - Forums
http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11ATI - Support and drivers
http://support.AMD.com/us/pages/AMDSupportHub.aspx============================================================================
Other troubleshooting methods would include the boot minimum and others who might help determine
the cause and eliminate problems.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one. Are these drivers or another file that I could use DL?
Hi JasonBedgood,
1. Once you get the error message?
2. did you of recent changes on the computer?This error occurs if the required driver is not installed or the driver is damaged.
I suggest that you update the driver for the device and check.
How can I update the driver for network card on the computer
1. click on Start, click Control Panel, and then double-click System.
2. click the tab hardware , and then click Device Manager.
NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
3. click on network adapters to expand.
4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
5. click on Update driver software.
6. follow the Wizard update software driver to update the driver for NICs .Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyIf the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Satellite Pro M10 - infrared does not work properly
Hello
I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Click Troubleshoot to start the troubleshooter for this device.
However, under Driver Details is said:
C:\windows\system32\DRIVERS\smcirda.sysI extracted the zip file in my home directory of c:\downloads\infrared.
whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.Thanks in advance for any help.
ChrisHello
If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.
-
Toshiba common modules does not work properly
Whenever I connect to the laptop, I get a message: Tfncky: Toshiba common modules does not work properly.
Anyone know what this means?
I wonder if that has something to do with my windows media player does not properly. If I open the application, it is not to maximize the screen shows the taskbar
Finally, it simply says "not responding" and I have to close the application. Tried to remove and reload that a new copy of WMP but it does not help.I don't know what laptop mode you but the first thing to do is to reinstall the Toshiba common modules.
Please visit Toshiba support and download page under http://eu.computers.toshiba-europe.com go to the download section, choose your phone model and download common modules.Please let us know if everything works well again.
-
Satellite L670 - after Win 8 upgrade WIFI does not work properly
Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.
The connection only works some time, usually only a few seconds before the connection is lost.
After a few seconds or minutes the connection is restored, just soon to be lost again.Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?
Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...
To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.
But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
The device was working properly under Win 7?I would recommend running a few Wlan test.
For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test. -
Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color. It's still orange, not mater if your speakers are on or off. His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.
I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there. The problem is about 2 weeks old. Have not added any new software that I know. But computer installs updates as received.
SimonHello
First download the audio driver by using the links below and save the installer to your desktop.
Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version. Once the installation is complete, restart the laptop.
Kind regards
DP - K
-
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
-
Microsoft Wireless Desktop Keyboard/Mouse 6000 V2 does not work properly.
Microsoft Wireless Desktop Keyboard/Mouse 6000 V2 does not work properly. The mouse does not allow me to use the wheel to scroll down to option and when I look at the drop down list, it does not keep list open. It opens and closes the list immediately. He continues to return the list to the top of the drop-down list. I checked the batteries in the keyboard and the mouse (replaced) resync'ed the two keyboard and mouse ports changed the receiver performed in and checked for update on both keyboard and mouse and have restarted my computer several times and it still does not work properly. I bought this Office Microsoft Wireless Keyboard and mouse 6000 V2 there are three 3 months and he can't take back to store because it has a warranty of 30 days of the store. Help.
Try it on another machine to ensure that it is not the lack of equipment.
And make sure you have the latest drivers/software installed for him.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
Hello
My Acer TravelMate 3273WXMi audio service does not work properly. I use an Audio_Realtek_6.0.1.5413_VistaX86 on W7 driver. The problem is no outside speaker and not micro.2 things:
-Why you are using Vista drivers with W7? No, there is no specific driver for W7 (search the website of Acer support for your machine).-you will never get full nombreauses for help, these drivers.See you soon,.Jerry -
My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.
You don't say what you mean by not working not properly, however...
Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.
-
I downloaded Multi Access Tool from Mcafee with Firefox Mozilla, how do I reinstall if it does not work properly?
My sincere apologies, my Mcafee came via the Optimum/Cablevision, not Mozilla. I now managed to solve my problem and appreciate the 2 above responses. Thank you.
-
Question
better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
DetailsIn current versions of Flash you can also do this via the control panel.
- Control Panel > Flash Player, click on remove and erase data
-
Satellite P200 accidents + message: graphic card driver does not work properly
Hello
hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.
When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.
It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.
I ran a system restore but the problem remains.
I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.
Matt
Hello
Sounds like the GPU problem.
But try the graphics card driver update.
Use the most recent driver for your graphics card.In addition, clean the fans of portable computers.
Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.If this is not enough, then a problem of graphics chip would be possible.
Maybe you are looking for
-
IntelHD chips in MacBook Air start just less efficient?
So I have a Core i5 MBA. 4 GB RAM, 128 GB SSD, and it is probably the strangest machine I've ever owned. Speakers just didn't work at all until yesterday when like magic, it started working, which - as a technician 16 - who actually me mystified but
-
Hello I collect the load data and discharge of a capacitor during different periods. Using the attached circuit, what the best way to define the sampling per channel and I can apply hours measuring without getting the slow operation systems. Thank yo
-
Help. My system is XP. I've lost the ability to access Outlook Express. It does not. Also my documents are now displaying symbols, for example, paragraph symbol, space/tab word symbols. Obviously, I have access to the Internet. I tried to reset to an
-
PROBLEM WITH INSTALLING WINDOWS WINDOWS XP SP3 PRO 8.1
When I try to install the full version of Windows Pro 8.1 on my computer drive I get two error messages. 1 point entry procedure '_CxxFrameHandler3' not found in the "msvcrt.dll" dynamic link library [2] the file 'autorun.dll' could not be found or i
-
Pavilion 500-324: loss of audio
I lost suddenly audio. Checking on my audio drivers there was a message that '.. '. the digital output 10 t High Def Audio Codec not connected displaly ". A similar message was given to a driver AMD. I checked the material connections to the extern