Christophe FX on save

Similar Questions

• Toshiba power saver disappeared completely

  Hello

  My "Toshiba power saver" disappeared - there is still an icon in the 'systensteuerung' but when I try to open it nothing happens. But still when I go to open the windows of Windows XP "energy management" tells me to use the "Toshiba power saver.
  This appeared after I used the "steganos security suite" to clean my system. First I did not notice the change because only a few icons in the taskbar where gone. The program must have deleted something. Does anyone know how to restore the "Toshiba power saver?
  I hope that there is another way to reinstall the "Toshiba power saver" instead of reinstalling the entire system...

  .. masse be nice if someone could help me.

  Ciao, Christoph

  Hi Christoph,

  You don't say what model of laptop you have, but you should be abl; e to load the Toshiba Power utility tools and Utilities CD that came with your laptop.

  If you do not have this CD, then you should be able to download the utility from the download section of the Web from Toshiba site specific to your model of laptop.

  HTH

• I finally got my toolbar in 4.0 as I want. How can I save it exactly as if it were? PS: I hate 4.0!

  My toolbars have been all screwed up, and when I asked for help the young man thought he was helping me, but it did not.
  I finally got their back as they were before the 4.0 and they don't take my whole screen.
  How can I save (or block in that position) them exactly as they are now?
  I would like to be able to back up and restore, so when Firefox messes with them I can get them to the top.
  Firefox was formally a perfect browser, now it's much better that I have Explorer... As my use of MOM to say, ' if it ain't broke, don't fix it! "
  Joyce Christopher

  Save a copy of the localstore.rdf file that is located in your profile folder.
  
  https://support.Mozilla.com/en-us/KB/profiles#w_how-do-i-find-my-profile

• LifeCam does not work, get a LifeCam error could not save your, photo, audio clip or video clip

  Just got a LifeCam Cinema.

  Installed the drivers-software, plugged the cam, noticed drivers installed.
  Tested by opening the installed LifeCam software. Describes the options to take photo, audio or video. "Or the other option does appear immediately the error" LifeCam could not save your, photo, audio clip or video clip.

  Shows Device Manager is installed correctly.
  Swapping the same USB ports it shows in the software, no device detected, a driver is re-installed during the exchange of the ports, it comes up with the 3 options mentioned before and again the same error message.

  Have also tried Google chat and shows no video, but gives the possibility to do video chats.

  System: Windows 7 64-bit.
  I have full admin rights on the system...

  Christophe ideas?

  Hello Striff,

  If the camera is not detected, it seems to me that the drivers are not installed for the device works, I suggest you reinstall the Lifecam drivers and check if you have the same problem.

  I suggest that you try different methods listed in the following article to resolve this problem:

  Troubleshoot failures to find the new LifeCam hardware:

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• iPhone save personalized answering machine message

  I forgot to go to save answering machine message on my iPhone 5 s
  Please help thanks in advance

  Go to the telephone-voice mail-> greeting >

• Doc MS Word 11 won't save

  Since the upgrade to Sierra I can't save a Word of MS Office 11 doc on my iMac.

  I left / restarted / safebooted / tried to save to Documents / tried to save it as a .doc, all to nothing done.

  All other operations look good, like the rest of the suite Office.

  I have now run out of ideas. Someone at - it ideas?

  Thank you very much...

  Try the search and post here.

  -Support of Microsoft Office for Mac

  -Support of Microsoft Office for Mac (2)

• Create, save data backup

  Hello

  This is probably a fairly common question, but I looked around and either did not answer or did not understand them. I honestly don't know who. So, without further ADO, here is my question.

  My iPhone becomes quite comprehensive, so I was thinking about the removal of some of the games I have on it to make room for the new. I have a few save data on the apps that I would still be there when the application is downloaded again later. Is there a way to do this?

  Thanks in advance.

  App data is stored in the backups of iOS - iTunes or iCloud.

  The backup of your iPhone, iPad and iPod touch - Apple Support

• Save the photos after update

  I updated my iphone 5 with the 10.0.2 update of apple's software. Now when I get an email with an attached photo, I don't have this option to save the photo in my camera.

  If you hold your finger on the picture it gives you the option?

• Music file won't save

  I just installed the new software for iTunes and lost all music except what I had bought in the shop.  I can't record albums when I try to add to my library.  I get the error message "cannot save files to the iTunes library.  An unknown error occurred (-50), I restarted, computer and software to uninstall/reinstall but no help.

  This article of turingtest2 can help:

  Empty/corrupted library iTunes after upgrade/crash

  or that directly from Apple Support:

  If you do not see your entire library after you update iTunes on your Mac or PC - Apple Support

• Word of the day screen saver loading of words but no definitions.

  Word of the screen saver of the day showing the "Entry not found" error for every word from installation of Sierra. Would welcome suggestions for fixing this.

  Try to switch the dictionary used in 'Screen Saver Options '.... »

• I lost the option to save pictures that are emailed to my Ipad mini

  When I open the contents of my hotmail on my IPad mini, I have now the possibility to record the content of the photo

  Hello. If you press and hold on the photo, you should get a popup with the save option. This makes work more like Safari.

• can I save two devices on a single iCloud?

  can I save two devices on a single iCloud?

  Yes, if they use the same account Apple ID (iCloud).

  http://www.Apple.com/icloud/Setup/

• screen saver turns on when using FaceTime

  Since the update to MAC OS Sierra, I noticed that my screensaver activates when using FaceTime - most annoying because I have to quickly move the mouse to put it all again.

  He didn't get it until I've updated from El capitan, so I guess it's something to do with MacOS Sierra.

  He's not doing it with Youtube but I'm still trying with Skype.

  Screen saver works as it should do it with an ordinary application (for example, safari, etc.) Pages) if I don't move the mouse or keyboard for the specified time (five minutes).

  I do not have hot set of corners, the display is set on turn off (energy prefs is system) after 10 minutes. Screen saver is five minutes of inactivity.

  I have an iMac 27 "retina, first generation (a little less than two years) with i5 and 16 gig memory, standard graphics M290X.

  I missed easy adjustment here?

  I have it, feel also my parents as well.

• I can't save analyses after you download Sierra OAS

  I can't save analyses after you download Sierra OAS.

  The "Save" button is grayed out?

  Hello 2014anthony1,

  Thank you for using communities of Apple Support.

  I see that you can not save scans after updating to Mac OS Sierra. I would make sure I can save analysis too, I do a lot of scanning on my Mac. Let's work together and get this problem is resolved.

  I suggest to use macOS Sierra: update or change the printer software, more precisely, that these sections:
  
  

  Most printers are compatible with Mac OS. When you add a printer, Mac OS automatically uses AirPrint to connect to the printer or the printer software downloads (also called a printer driver).

  If you can not use a printer that is already added, or you see not the options you want in the print dialog box, you can add the printer again with different or software to print settings different.

  Add your printer with different parameters

  1. Choose the Apple menu > System Preferences, and then click Printers and scanners.

  2. Select your printer from the list, and then click the button Delete .

  3. Click on the button Add and if a context menu appears, choose Add a printer or a Scanner.

     A dialog box is displayed that lists all Hello, IP, printers directory shared, and open on your local network. It may take a minute or two for your printer to appear.

  4. Select your printer, when it appears in the list, and then do one of the following:

     • Use AirPrint: Click on the drop down menu, then choose AirPrint (or Secure AirPrint). If AirPrint is not on the shortcut menu, the printer does not support it.

     • Use a printer software installed on your Mac or downloaded from Apple: Click on the drop down menu, then choose Select software.

     • The software to print a file on your Mac: Click on the dropdown menu, then select other. Select the file, and then click Add.

  Update your printing software

  If your printer is not how to use AirPrint, you can use Software Update to download the latest version of the software. If you don't do this, you see a message that software is not available when you connect your printer.

  • Choose the Apple menu > App Store, and then click updates.

    Install the software updates that are listed for your printer.

  • If the software for your printer is not available using the software update, you can contact the manufacturer for more information. Maybe it's that your printer is not compatible with Mac OS. To check, see the article Apple Support printer and scanner software available for download.

  If you install the printing software you don't have Apple, printing software can not be updated automatically when you use the software update.

  Let us know if that helps. We'll help you get through this.

  All the best!

• Motion 5, how to save a template of the PCF as Project Builder?

  I am a user of Apple Motion 5. I don't have FCP since I'm only interested in entertainment.

  I downloaded a nice gift that after installation, stood under Final Cut generators in Motion 5. I try to open it, change some settings and save the result as a Motion project. However, I have found that I can just save it as a new model (which there still appears somewhere under Final Cut generators).

  Is it correct that I can't save it as a project of Motion? If this is not the case, correct, how to proceed?

  Yes, FCPX models are a very different type of project of Motion than a generic Motion.  They have different suffixes.  You want a .motn file.  Those of FCPX is .moef (effects), .motn (generators), .moti (titles), .motr (transitions).   Some of them have hidden the integrated structural elements that make their work as in FCPX and does not work as a generic Motion project.

  That said, you can get what you want.  Here are three tips:

  1 - Note that a generator of FCPX is the same suffix as a generic Motion project, .motn.  Just move it out of the Motion Tempates folder if you do not use FCPX.  You can get rid of the files "large.png" and "small.png", that they are only used in FCPX media browser previews.  Save the 'Media' folder if all is in it, and if so, keep the .motn file and the folder inside their original folder, together.  If the "Media" folder is empty, you can extract the file of project .motn by itself.

  2. you can start a new generic Motion project, open the FCPX template file, and then copy and paste layer objects in between.  That's what I do quite often.

  3. just as a tip, if you have a generic Motion project, in the file menu, you can chose to publish under a generator FCPX file.  But not to record a project generator FCPX a generic.