Doc MS Word 11 won't save

Similar Questions

• oficejet k80xi win7 - doc in word 2010 won't print the background of any border when adding to a doc?

  New gateway w / Win7 64 bit

  Word 2010 (Office Pro 2010)

  HP Officejet K80xi - USB connection

  For some strange reason, whenever I try to add a border (does not appear what kind of importance), it looks good in the 'page' mode, but when I go to print, the preview does not display the bottom of the border line, and it will not be printed.  The other sides (top, right, and left) display and print correctly.  Microsoft took the same doc that I did this and it worked well for them, so the conclusion was that the printer driver perhaps is?  I would be happy if I could change a setting in Word, or the printer if I can get the entire border to print!  It doesn't seem to be any other question, I noticed with Win7 and this printer so far.

  I managed to 'fix' it is by changing the settings as follows:

  Set margins on all sides over.5 inches

  Define the edge of page to adjust the text rather than the edge of the page

  And play with the number of points and sizes of margin, as well as making my text further down until I got the best looking for border and possible space - is not ideal, but worked and printed.  Thanks for your suggestions.

  I think it is likely that the printer itself has a few limitations of the border and is old and probably would not have this issue had just bought a new printer rather than ink.  I don't like to mix old printers so they are still works well!

• hp3512 will not ley me save scanned doc to word doc.

  hp3512 will not ley save me scanned doc to word doc it gives only metheoptions save to JPEG, format PDF ortiff. How can this be repaired?

  Hi lake1998,

  When you save a document format, you are talking about OCR or optical character recognition.  The 3512 Deskjet will allow you to save the files analyzed in the formats listed, but it doesn't have a built in OCR.

  This thread has identified solutions that may work for you.

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/is-it-possible-to-find-an-OCR-SW-for-the-HP-DeskJet-5525/m-p/3520899/highlight/true#M81608

• RoboHelp for Word 7 is not save the rtf and won't compile .hlp

  I use RoboHelp for Word 7 for producing WinHelp files. It has been working fine since several months on this computer.

  Just in the last week, I had a problem with my Word 2007 when you try to open a .doc file. I received the message that the nswrd632.wpc converter was not found. After a search on the Microsoft forums, I edited the registry and saved this converter.

  But now (and which may be unrelated to the Word Converter message) HR will not save the .docx or .rtf file. Whenever I click on save all, nothing happens. When I click project output, the message I need to back up the files, and I click Yes to all. Nothing happens except the message is closed. No files are saved and HR will not end. The only way I can get out of HR is to click on no, which means of course my changes are not saved. I can't save the file menu of Word .docx, either.

  Also, I can not compile the file. Yet once, no error message, just does not compile.

  I searched the Word HR forums, so that I reinstalled RH, made sure HR add-ins are enabled and removed all the .dot files. Nothing works. I went extracted 112 of Peter Grainge and followed the instructions there - no change.

  I found that, after making my changes in the Word document, if I save manually the RTF file by going into the directory Word save slot, the changes will be saved and HR compile the .hlp file - once.

  Any ideas?

  Hi, I have a problem almost identical, except that my project uses rather than .rtf files .doc files. I was able to solve the "unable to save" problem by following the information below. I still have not solved the problem "cannot compile.

  I use Windows XP, RH7 build 100, Office 2007. My project was created by using Office 2003 and I haven't lived all these issues until I recently upgraded to Office 2007.

  This correction was sent to me by guy 'tech' in my group.

  A number of Adobe RoboHelp for Word 7 users have reported that they cannot save the changes or generate output. The issue has been isolated to the RHComAdd.DLL be disabled.

  Check in Word:

  • For versions 2003, go to help | Everything | Disabled items. If RHComAdd.DLL display, re - enable.
  • For Word 2007, click on Office button | Word Options | Macros complementary. Under 'Manage' select disabled items, and then click Go. If RHComAdd.DLL appears, highlight it and turn it back on. (This IS WHAT I DID)

  You can also re - register the DLL. Go to start | Run and type the following line, assuming that you have installed RoboHelp at the default location.

  regsvr32 "C:\Program Files\Adobe\Adobe RoboHelp 7\RoboHELP\RHComAdd.dll"

  How to get off this DLL? The cause was identified as a Word document is open in Internet Explorer rather than in Word.

  This problem has been fixed in version 7.0.2.

  Hope this helps you. I'm still working on the compilation error.

  -Shannon Mooney

• Why my iCloud won't save my photos

  I bought more storage but iCloud won't save my photos, I have 50 GB of data and its available 49.1 says. I'm afraid that if I restore it I won't lose all my photos and videos.

  What makes you think that iCloud is not back up your photos? If you use iCloud photo library, the photos are "stored" in iCloud, but not in the backup.

  Go to settings > general > storage & use iCloud > iCloud > storage management > your device. You see pictures in the backup?

  iCloud: overview of backup and storage iCloud

  The backup of your iPhone, iPad and iPod touch - Apple Support

• Firefox won't save, preferences, passwords, bookmarks, or bookmarks & imported settings of Safari.

  Firefox won't save bookmarks, passwords or preferences. He also won't save Favorites and imported settings of Safari. I tried the suggestions of help, but nothing seems to work. All the settings seem to be correct. I reloaded the software several times. When I allow Firefox import settings of Safari, it takes more than 40 minutes and then loses everything when I restart Firefox. I tried to start Firefox in safe mode, but it does not help.

  I use Mac OS on a MacBook Pro 17 "2011 start 10.6.8. Everything else on the computer seems to work very well.

  The application databases

  Name: Firefox
  Version: 42.0
  Build ID: 20151029151421
  Update channel: output
  User Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6. RV:42.0) Gecko/20100101 Firefox/42.0
  Windows multiprocessing: 0/1 (default: false)
  Safe mode: true

  Reports of incidents for the last 3 days

  All Crash reports

  Extensions

  Name: Firefox HTTP authentication from the resources of the fix
  Version: 20150902.02
  Enabled: false
  ID: [email protected]

  Graphics

  Asynchronous Pan/Zoom: no
  Device ID: 0 x 6741
  GPU accelerated Windows: 0/1 Basic
  Supports decoding H264 Hardware: false
  Vendor ID: 0 x 1002
  windowLayerManagerRemote: false
  AzureCanvasBackend: skiing
  AzureContentBackend: quartz
  AzureFallbackCanvasBackend: no
  AzureSkiaAccelerated: 0

  Important change preferences

  Browser.cache.Disk.Capacity: 358400
  Browser.cache.Disk.filesystem_reported: 1
  Browser.cache.Disk.smart_size.first_run: false
  Browser.cache.frecency_experiment: 4
  browser.download.importedFromSqlite: true
  browser.places.smartBookmarksVersion: 7
  browser.sessionstore.upgradeBackup.latestBuildID: 20151029151421
  Browser.Startup.homepage_override.buildid: 20151029151421
  Browser.Startup.homepage_override.mstone: 42.0
  DOM.apps.Reset - permissions: true
  dom.mozApps.used: true
  extensions.lastAppVersion: 42.0
  gfx.blacklist.Direct2D: 3
  gfx.blacklist.layers.Direct3D9: 3
  gfx.blacklist.WebGL.MSAA: 4
  Media.GMP - gmpopenh264.abi: x86_64-gcc3-u-i386-x86_64
  Media.GMP - gmpopenh264.lastUpdate: 1447836477
  Media.GMP - gmpopenh264.version: 1.4
  network.cookie.prefsMigrated: true
  Network.Predictor.cleaned - up: true
  places. History.expiration.transient_current_max_pages: 104858
  plugin.disable_full_page_plugin_for_types: application/pdf
  plugin.importedState: true
  privacy.sanitize.migrateFx3Prefs: true

  Important preferences locked

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: false
  Prevent accessibility: 0

  Versions of the library

  NSPR
  The expected minimum version: 4.10.10
  Version: 4.10.10

  NSS
  The expected minimum version: 3.19.4 based ECC
  Version: 3.19.4 based ECC

  NSSSMIME
  The expected minimum version: 3.19.4 based ECC
  Version: 3.19.4 based ECC

  NSSSSL
  The expected minimum version: 3.19.4 based ECC
  Version: 3.19.4 based ECC

  NSSUTIL
  The expected minimum version: 3.19.4
  Version: 3.19.4

  Experimental features

  The problems are gone now. However, I'll never know exactly what that caused them. When I restarted the computer in safe mode problems continue. But when I tried to restart my computer does not recognize the hard drive in safe mode or in normal mode.

  It is possible that the Firefox problems were caused by a faulty hard drive.

  I was able to rebuild the directory with Disk Warrior and transfer my files, but the disk would not boot. Fortunately, I had a spare hard drive. I installed and reloaded all my software and data from scratch. I also downloaded the latest version of Firefox. Firefox works fine now.

  Thanks for all your suggestions. They may not have fixed this particular problem, but I learned a few new tricks from you to solve other problems.

  Allen

• Why is the box to remember password is gray? It used to work now it won't save them.

  Why is the box to remember password is gray? It used to work now it won't save them.

  This could be because you have set Firefox not remember the history. Who did you intentionally? It is defined in the Options dialog box:

  "3-bar" menu button (or tools) > Options > privacy

  Maybe it would work if you choose "Use the custom settings for history" and not to turn off specific things that you want to disable.

  A little luck?

• Settings network won't save, always defined on the unnecessary Manual proxy setting.

  When opening Firefox, go to any Web site displays an error message saying that the proxy server is refusing connections. Allows you to manually adjust the network settings solves the problem, but only for as long as firefox is open. Already gone through all the 'preferences won't save' troubleshooting patches with no result.

  Thank you SO much cloudlift. I had this problem for a while now and finally managed to resolve it with your help. My problem wasn't with foxmarks, but personas.

• Portfolio Manager MSN Money won't save data

  Portfolio Manager MSN Money no data records. As soon as I get back from a transaction, she quits and won't save data.

  and sometimes it will say that the server is busy data will not be saved. He did this for more than a week, I never

  had a problem before this.

  It worked for me. I used another computer with XP and IE 8, I opened MSN Money and it worked fine I have updated my portfolio and had no problem to save. I closed MSN Money and then opened it on my computer Windows 7, open portfolio with all the changes. What is really

  strange thing is THAT MSN Money now works very well on my computer windows 7.

  It can work for you?

• "Word cannot complete the save due to a file permission error."

  I have Windows XP.  Recently, this message appeared when I tried to save my Word documents: "Word cannot complete the save due to a file permission error."  I can always eventally the record via a temporary file, but it's very messy.  "A file permission error" - what on Earth is this?  And what should I do to get things to normal?     Ron Davis, Newcastle N.S.W..

  When you press the F8 key and access the Safe Mode start screen, use the arrow keyboard keys to select "Safe Mode with networking" and press the Enter"" key.  A list of startup items you will see on the screen, but after all that, you will get a normal login screen (except the screen may seem bigger than normal and 'Safe Mode' can appear in the corners of the screen.  At this point, log in as any user with administrator privileges.  After successfully login, you should be able to right click on a folder or file and select "Properties".  When the Properties screen, you should have a 'Security' tab at the top.

  Another approach is to use the command line command "cacls" to a normal startup that will show and allow you to set permissions on files and folders.  (Start-> Run-> "cmd") and then you can use the cacls command.  The Calc command syntax can be found here:

  <>http://TechNet.Microsoft.com/en-us/library/bb490872.aspx >

  or you can type: cacls /?

  "Cacls" allows to screw things easily and quite bad so if you can switch to the tab 'Security', which is the way to go.

  HTH,

  JW

• Rocket won't save the radio or the voice

  When I got it I did all the two just to check out them and they worked, but I didn't want them so I deleted them it's been a few weeks and it won't save! For radio, he looks at his will do, it stops request if I would record I say yes but there is nothing in the file! For voice I click Save now and the screen fades away for a few seconds then goes back to the menu! Help, please! Thank you!

  Just for the devil, why don't you reinstall firmware

• error when trying to save to a flash drive "word cannot complete the save due to a file permission error.

  error when I try to record that a flash drive "word cannot complete the save due to a file permission error" (F\:filename)

  Hello

  We have recently launched a Microsoft Answers for Office forum:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Best wishes!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Adobe reader software: my computer won't save adobe reader or any player of pdf files

  my computer won't save adobe reader or any player of pdf files

  Download and save > then install.

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-file-you-have-downloaded

  Search for a file that you have downloaded

  This information applies to Windows Internet Explorer 7 and Windows Internet Explorer 8.

  When you use Internet Explorer to download a file from Internet, you are usually asked where you want to store the file. If you specify where you want the file to be stored, Internet Explorer try normally put a file in the appropriate place. For example, documents and Web pages are normally saved in the Documents folder, music music files in the folder, and the images and graphics are saved in the pictures folder. In Internet Explorer 7, which could potentially harmful, such as executable programs, files are saved in the folder of the first temporary Internet files, and then copied in the folder you specified. Programs and various downloads are also sometimes saved to the downloads folder. Here are some tips on searching for files, that you downloaded.

  If you download a file, and the save file dialog box appears, it is best to specify the folder in which you want to save the file to. This will save time later. If you save multiple files, Windows will normally remember the last folder you have saved, if you do not have to specify the folder again.

  See you soon.

  Mick Murphy - Microsoft partner

• Z3 phone won't save any type of picture file

  For about five days now my Z3 phone won't save any type of photo file using any method I can think of. I deleted a lot of memory, tried to use the diagnosis Album (no joy), saved on my laptop (no problem detected during the process), cleared the cache and junk files, I don't know what to try next. It will save all the pictures taken by the camera, will not save the screenshots, wallpapers, downloads, transfers - any photo file type whatsoever.

  Help, please!

  @Rowanmaya

  Settings > apps > all > camera > clear data > restart the phone

  What do you see under

  Settings > storage > free memory?

• I restored the computer to an earlier date and now the password windows 7 won't save us.

  I restored my computer to girls at an earlier date, and now the password windows 7 won't save us. She never changed the password before and now we cannot connect. How to do it please help.

  I restored my computer to girls at an earlier date, and now the password windows 7 won't save us. She never changed the password before and now we cannot connect. How to do it please help.

  This means that a different password was in effect at this point, even if your daughter thinks otherwise. There are a lot of options built into Windows to help you out of this situation:

  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (only works if an indicator was created and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

  The most important point would be: run a machine without a spare admin account is about as risky to have a house key. Sooner or later, he is at risk for any number of reasons.