Cisco 1841 VPN

Hello

I have a router 1841 to site A is connected to site B (Fortinet FW) via the L2L VPN via internet. If a remote access user would connect to the site-A, through RA VPN over the internet, it would be able to connect to the site B as well? Is this also possible if I have a FW ASA instead of a 1841 router?

Thank you! :)

If his support, it would be the same as the ASA (in a crypto map configuration).

Concerning

Farrukh

Tags: Cisco Security

Similar Questions

VPN between 2 routers Cisco 1841 (LAN to LAN)

Hello

I need to connect two offices (two different LAN) using routers cisco 1841 at both ends.

Currently the two cisco router are in working condition and refer the internet LAN clients. (making the NAT).

Can someone please tell us what is the easiest way to set up a VPN between two sites, so that LAN users to an office to access mail servers electronic/request to the office LAN.

I understand that I need IPSec Site to Site VPN (I think).

Anyonce can you please advise.

Kind regards.
```
s.nasheet wrote:
Hi ,
I need to connect two offices ( two different LAN's) together using cisco 1841 routers at both end.
Currently both cisco router are in working order and  acting as a internet gateway to the LAN clients. ( doing NAT).
Can anybody please advise what is the easiest method to configure VPN between two sites so that  LAN users at one office be able to access  the  email/application servers at the other LAN office.
I understand I need IPSec Site to Site VPN  ( i think).
Can anyonce please advise.
Regards.
```
Yes, you need a VPN site-to site. Start with this link which gives a number of examples to set up a VPN S2S between 2 routers Cisco.

http://www.Cisco.com/en/us/Tech/tk583/TK372/tech_configuration_examples_list.html#anchor16

Jon

How to Setup Cisco 1841 as a site to site VPN VPN server, with watch guard

I would like to implement a cisco 1841 as a VPN server to establish s IP VPN (site to another) of a watch guard firewall,.

I have looked through some examples of cisco config, but can't seem to get a lot.

Can you please send me sample config steps I need o perform on the cisco router? and what credentials must be awarded to watch keeps establishing a permanent VPN?

emergency assistance will be greatly appreciated.

The cisco router is configured as a lan to lan normal IPSEC tunnel, there is no difference when configuration to create a tunnel to a watchguard/sonicwall or all that peer will use, you can use this link as a guide:

http://www.Cisco.com/en/us/products/HW/routers/ps221/products_configuration_example09186a008073e078.shtml

If you have problems make me know.

VPN on Cisco 1841 router

Hello

I need to configure the vpn site to site on router cisco 1841, but the problem is that the router does not recognize the crypto comand.

R1 #conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1 (config) #crypto?
% Unrecognized command
R1 (config) #crypto?
% Unrecognized command
R1 (config) #c?
call call-history-mib id-carrier cdp
chat script class-card clock SNC
config-register connect plan control configuration

R1 (config) #crypto isakmp policy 1

^
Invalid entry % detected at ' ^' marker.

R1 #sh worm
Cisco IOS Software, 1841 (C1841-IPBASE-M), Version 12.4 (1 c), RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Updated Wednesday 25 October 05 17:10 by evmiller

ROM: System Bootstrap, Version 12.3 T9 (8r), RELEASE SOFTWARE (fc1)

the availability of CS-Khatlon-opio-01 is 2 days, 23 hours, 13 minutes
System returned to ROM of charging at 16:07:44 TJK Friday, November 7, 2014
System image file is "flash: c1841-ipbase - mz.124 - 1C.bin.

Cisco 1841 (revision 6.0) with 114688K / 16384K bytes of memory.
Card processor ID FCZ102110NQ
2 FastEthernet interfaces
Configuration of DRAM is 64 bits wide with disabled parity.
191K bytes of NVRAM memory.
31360K bytes of ATA CompactFlash (read/write)

Configuration register is 0 x 3922

Please help, how to set up vpn?

Hello

According to this output is more than clear that you do not have a k9 license applied to this router, this license will enable the security features on your IOS, in this case, you will need a permit of k9 with an activation key, and then you will be able to have available on your device encryption controls. Once you have that we can work on configuring site to site.

Do not forget to rate!

David Castro,

Kind regards

Cisco 1841 to Vigor VPN

Hi all

I desperately need help. I spent the last 48 hrs trawling internet try to find how to set up secessfully

I have port ports 80 and 443 forwarded for 78.25.xxx.xxx to our 192.168.6.65 local mail server. But all im presented with is unable to display the page when I try and connect to the external IP address on the local network. But if I try this address outside the local access network, then it works fine?

My other problem I have is that I would like to setup 7 vpn which all dial for this router. They are configured to use ipsec with a preshared key ike. The dial of the router are vigor 2600-2820 series and I was going to use the following configuration to the cisco but it crashes card crypto cm-cryptomap.

If anyone can help me I would really really appreciate it.

Network configuration
IP PUBLIC IP PRIVATE
HUB (CISCO 1841) 192.168.6.0 SITE 78.XX. XXX.48
SITE SPOKE (VIGOR 2600) 192.168.88.0 85.XX. XXX.85

# tried vpn config that did not work.

crypto ISAKMP policy 1
md5 hash
preshared authentication
life 3600
ISAKMP crypto key 123 address 85.189.xxx.xxx (site of talk)
Crypto ipsec transform-set esp cm-transformset-1-esp-md5-hmac
Dimensions of tunnel mib crypto ipsec flowmib history 200
MIB crypto ipsec flowmib size of 200 historical failure
Crypto card cm-cryptomap-address FastEthernet0/0
cm-cryptomap 1 ipsec-isakmp crypto map
defined by peer 85.189.155.85 (site of talk)
the value of the transform-set cm-transformset-1
match address 100

interface FastEthernet0/0
cm-cryptomap crypto card
access-list 100 permit ip 192.168.6.0 0.0.0.255 192.168.88.0 0.0.0.255

Here is the config complete less info vpn that works perfectly with bonded adsl
# FULL CONFIG #.

Current configuration: 3938 bytes
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
BURTON hostname
!
boot-start-marker
boot-end-marker
!
activate the FBI secret 5
activate the password xxxxxxxxxxx
!
No aaa new-model
IP cef
!
!
property intellectual auth-proxy max-nodata-& 3
property intellectual admission max-nodata-& 3
!
!
name of the IP-server 62.121.0.2
name of the IP-server 195.54.225.10
!
!
Crypto pki trustpoint TP-self-signed-692553461
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 692553461
revocation checking no
rsakeypair TP-self-signed-692553461
!
!
TP-self-signed-692553461 crypto pki certificate chain
certificate self-signed 01
308201A 5 A0030201 02020101 3082023C 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
69666963 36393235 35333436 31301E17 313031 31323431 34343930 0D 6174652D
325A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
532D 5365 6C662D53 69676E65 4365 72746966 69636174 652 3639 32353533 642D
06092A 86 4886F70D 01010105 34363130 819F300D 00308189 02818100 0003818D
BA51CDF7 D418D270 7DCE516E 1ADE6DF5 82FE4507 CD1EBE0A 4B6E4B15 9A3C20ED
B1D19FC9 63D0B925 0A4611FF CE8D935C 264FC3FE DF8BFAC2 76EC38ED 68115F43
20A68D85 C04A564E 8BDE86FE 127F79B4 8E123D9C 8430940C BCD5CDA4 ADAAE387
FA1E14A6 ECF92197 0CF54E89 B33915E7 A4E01EC7 CE45DDF6 AA60D168 38C92E67
02030100 01A 36630 03551 D 13 64300F06 0101FF04 05300301 01FF3011 0603551D
11040A 30 08820642 5552544F 4E301F06 23 04183016 03551D 8014645E 3FDE4E90
A8773580 81EE4217 F4821238 993A301D 0603551D 0E041604 14645E3F DE4E90A8
77358081 EE4217F4 3A300D06 01040500 03818100 86F70D01 82123899 092A 8648
B9B21771 6B8C0F9E C66B907A AC7A09BF 1FFCB332 0C7B6446 22483 HAS 32 5EE7D1FC
128A 9224 30964615 E70FFE29 513455AB 6A1747C4 250070DF 4ABE123D 0A29DD8B
E67A33F0 4E61AB87 9AE1D2DC 72741BE7 3A9AD79D 13B622B3 BCADCDAA 9D5EA74C
567D AD429722 9AE90E13 7D80027F 4FA37A7F 65014 2852 HAS 45 43CB141C 36FCB96B
quit smoking
!
!
!
!
!
!
interface FastEthernet0/0
Description $ETH - LAN$
IP 192.168.6.40 255.255.255.0
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
!
interface FastEthernet0/1
no ip address
Shutdown
automatic duplex
automatic speed
!
ATM0/0/0 interface
no ip address
no ip mroute-cache
No atm ilmi-keepalive
Bundle-enable
DSL-automatic operation mode
PVC 0/38
aal5mux encapsulation ppp Dialer
Dialer pool-member 1
!
!
ATM0/1/0 interface
no ip address
no ip mroute-cache
No atm ilmi-keepalive
Bundle-enable
DSL-automatic operation mode
PVC 0/38
aal5mux encapsulation ppp Dialer
Dialer pool-member 1
!
!
interface Dialer0
the negotiated IP address
NAT outside IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 1
Dialer-Group 1
PPP reliable link
Authentication callin PPP chap Protocol
PPP chap hostname [email protected] / * /
PPP chap password 0 xxxxxxxx
PPP ipcp dns request
reorganizes the PPP link
multilink PPP Panel
PPP multilink sliding 16 mru
period of PPP multilink fragment 10
Panel multilink PPP interleave
multiclass multilink PPP
!
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 Dialer0
!
IP http server
IP http secure server
overload of IP nat inside source list 100 interface Dialer0
IP nat inside source static tcp 192.168.6.65 25 interface Dialer0 25
IP nat inside source static tcp 192.168.6.45 Dialer0 1723 1723 interface
IP nat inside source static tcp 192.168.6.65 80 78.XX. XXX.61 extensible 80
IP nat inside source static tcp 192.168.6.65 78.XX 443. XXX.61 extensible 443
IP nat inside source static tcp 192.168.6.30 80 78.XX. XXX.62 extensible 80
IP nat inside source static tcp 192.168.6.30 78.XX 443. XXX.62 extensible 443
!
access-list 100 permit ip 192.168.6.0 0.0.0.255 any
Dialer-list 1 ip protocol allow
public RO SNMP-server community
!
!
control plan
!
!
Line con 0
line to 0
line vty 0 4
password xxxxxxxxxxxx
opening of session
!
Scheduler allocate 20000 1000
end

Cryptography works fine it seems.

The error you receive is I think because that side vigor is able to encrypt a subnet ip (range) that is not defined by Cisco.

The force he sends down to Cisco and after decrypting the Security Association IPSEC is a fall because it does not part of interesting traffic.

But, I guess you're already running.

Cisco 1841 how vpn tunnels? default 100vpn?

Hi everyone, I have read the previous posts and I read that the cisco 1841 can manage up to 100 default VPN tunnels.

1. is this true? (I enclose my worm of show)

2. this version of IOS support SSL VPN tunnels as well?

SH ver
Cisco IOS Software, 1841 (C1841-ADVSECURITYK9-M), Version 12.4 (3i), VERSION of the SOFTWARE (fc2)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Updated Thursday 28 November 07 18:48 by stshen

ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1)

Uptime SPAREROUTER is 7 minutes
System to regain the power ROM
System image file is "flash: c1841-advsecurityk9 - mz.124 - 3i.bin".

... Output omitted

Cisco 1841 (revision 7.0) with 234496 K/K 27648 bytes of memory.
Card processor ID FTX1151Y0BQ
2 FastEthernet interfaces
1 module of virtual private network (VPN)
Configuration of DRAM is 64 bits wide with disabled parity.
191K bytes of NVRAM memory.
62720K bytes of ATA CompactFlash (read/write)

Configuration register is 0 x 2102

SPAREROUTER #.

Thank you

Randall

Hello

I guess that means that the total number of vpn ipsec tunnels taken in charge by the router of SSL VPN AIM is 800.

If you want only a SSL VPN without the AIM module can it be based on the license.

Kind regards

Anisha

P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

L2l VPN with NAT static to hide the IP internal on Cisco 1841 ISR

I configured a VPN L2L on a Cisco 1841 ISR. I'm statically from some of my internal hosts to IPS that are included in encrypted traffic. Please note that not all internal hosts are underway using a NAT. I am doing this for hidden some of the actual IP addresses on the inside network. I confirmed that the VPN works as well as natives of VPN traffic. I configured VPN L2L traditionally on the Cisco ASA 5500 Series devices, and this is my first attempt with HIA of 1841. I want just the other to take a glance to see if I missed something, or could I effectively part of the configuration. All comments are welcome.

VPN-RTR-01 #show run
Building configuration...

Current configuration: 9316 bytes
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname VPN-RTR-01
!
boot-start-marker
boot-end-marker
!
! type map necessary for vwic/slot-slot 0/0 control
logging buffered 51200 warnings
no console logging
enable secret 5 xxxxxxxxxxxxxxx
enable password 7 xxxxxxxxxxxxxxx
!
No aaa new-model
IP cef
!
!
!
!
no ip domain search
property intellectual auth-proxy max-nodata-& 3
property intellectual admission max-nodata-& 3
!
!
Crypto pki trustpoint TP-self-signed-2010810276
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2010810276
revocation checking no
rsakeypair TP-self-signed-2010810276
!
!
TP-self-signed-2010810276 crypto pki certificate chain
certificate self-signed 01
30820246 308201AF A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 32303130 38313032 6174652D 3736301E 31393334 OF 30333131 170 3131
30365A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 32 30313038 65642D
31303237 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100C3FF F5EADA3B BCB06873 5577DB24 2AD8ECBB 00D53F1A 37342E2E 5CC9202A
7F128E51 016CD6EC D8734F4D 28BE8B0A FCD6B714 8D13585B 7844C09C 79BA8F13
B75E4E98 25D91F02 A4773F66 83407A8B 85447 64 A6889DD9 6085857F 737F8A9F
749F4297 8804C4F3 D28A6C33 F4137BBE 67F9B945 F239789E 1303AD6D DB98B7E2
52B 50203 010001 HAS 3 1 130101 FF040530 030101FF 30190603 0F060355 6E306C30
551 1104 12301082 0E535458 2D56504E 2 525452 2 303130 1 230418 1F060355 D
3B 232987 30168014 2CBB9DD0 B34B7243 7F8095C8 7AFBEFE3 301D 0603 551D0E04
1604143B 2329872C BB9DD0B3 4B72437F 8095C87A FBEFE330 0D06092A 864886F7
010104 05000381 8100A 831 8E05114A DE8AF6C5 4CB45914 36B6427C 42B30F07 0D
C5C47BC9 0110BCAA A985CB3F 5CBB855B B12D3225 B8021234 86D1952C 655071E4
66C18F42 F84492A9 835DE884 341B3A95 A3CED4E8 F37E7609 88F52640 741D74D2
37842 D 39 E5F2B208 0D4D57E1 C5633DEB ACDFC897 7D50683D 05B5FDAA E42714B4
DD29E815 E9F90877 4 D 68
quit smoking
username privilege 15 password 7 xxxxxxxxxxxxxxx lhocin
username privilege 15 password 7 xxxxxxxxxxxxxxx jsmith
!
!
!
!
crypto ISAKMP policy 5
BA aes 256
preshared authentication
Group 2
lifetime 28800
xxxxxxxxxxxxxxx key address 172.21.0.1 crypto ISAKMP xauth No.
!
!
Crypto ipsec transform-set ESP-AES256-SHA esp - aes 256 esp-sha-hmac
!
card crypto SITES REMOTE VPN-ipsec-isakmp 1
defined by peer 172.21.0.1
game of transformation-ESP-AES256-SHA
match address VPN-REMOTE-SITE
!
!
!
interface FastEthernet0/0
no ip address
automatic speed
full-duplex
No mop enabled
!
interface FastEthernet0/0.1
encapsulation dot1Q 1 native
!
interface FastEthernet0/0.2
Description $FW_INSIDE$
encapsulation dot1Q 61
IP 10.1.0.34 255.255.255.224
IP access-group 100 to
IP nat inside
IP virtual-reassembly
!
interface FastEthernet0/0.3
Description $FW_OUTSIDE$
encapsulation dot1Q 111
IP 172.20.32.17 255.255.255.224
IP access-group 101 in
Check IP unicast reverse path
NAT outside IP
IP virtual-reassembly
crypto VPN-REMOTE-SITE map
!
interface FastEthernet0/1
no ip address
Shutdown
automatic duplex
automatic speed
!
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 172.20.32.1
IP route 10.16.0.0 255.255.0.0 10.1.0.33
IP route 10.19.0.0 255.255.0.0 10.1.0.33
IP route 10.191.0.0 255.255.0.0 10.1.0.33
IP route 10.192.0.0 255.255.0.0 10.1.0.33
IP route 192.168.20.48 255.255.255.240 10.1.0.33
!
!
IP http server
local IP http authentication
IP http secure server
IP http timeout policy inactive 600 life 86400 request 10000
IP nat inside source map route NO_NAT interface FastEthernet0/0.3 overload
IP nat inside source static 10.191.0.11 192.168.20.54 STATIC_NAT_7 card expandable route
IP nat inside source static 10.191.0.12 192.168.20.55 STATIC_NAT_8 card expandable route
IP nat inside source static 10.192.1.1 192.168.20.56 STATIC_NAT_1 card expandable route
IP nat inside source static 10.192.1.2 192.168.20.57 STATIC_NAT_2 card expandable route
IP nat inside source static 10.192.1.3 192.168.20.58 STATIC_NAT_3 card expandable route
IP nat inside source static 10.192.1.4 192.168.20.59 STATIC_NAT_4 card expandable route
IP nat inside source static 10.192.1.5 192.168.20.61 STATIC_NAT_5 card expandable route
IP nat inside source static 10.16.1.6 192.168.20.62 STATIC_NAT_6 card expandable route
!
VPN-REMOTE-SITE extended IP access list
IP 192.168.20.48 allow the host 0.0.0.15 10.174.52.39
IP 192.168.20.48 allow the host 0.0.0.15 10.174.52.40
inside_nat_static_1 extended IP access list
permit ip host 10.192.1.1 10.174.52.39
permit ip host 10.192.1.1 10.174.52.40
refuse an entire ip
inside_nat_static_2 extended IP access list
permit ip host 10.192.1.2 10.174.52.39
permit ip host 10.192.1.2 10.174.52.40
refuse an entire ip
inside_nat_static_3 extended IP access list
permit ip host 10.192.1.3 10.174.52.39
permit ip host 10.192.1.3 10.174.52.40
refuse an entire ip
inside_nat_static_4 extended IP access list
permit ip host 10.192.1.4 10.174.52.39
permit ip host 10.192.1.4 10.174.52.40
refuse an entire ip
inside_nat_static_5 extended IP access list
permit ip host 10.192.1.5 10.174.52.39
permit ip host 10.192.1.5 10.174.52.40
refuse an entire ip
inside_nat_static_6 extended IP access list
permit ip host 10.16.1.6 10.174.52.39
permit ip host 10.16.1.6 10.174.52.40
refuse an entire ip
inside_nat_static_7 extended IP access list
permit ip host 10.191.0.11 10.174.52.39
permit ip host 10.191.0.11 10.174.52.40
refuse an entire ip
inside_nat_static_8 extended IP access list
permit ip host 10.191.0.12 10.174.52.39
permit ip host 10.191.0.12 10.174.52.40
refuse an entire ip
!
access-list 100 remark self-generated by the configuration of the firewall SDM
Access-list 100 = 1 SDM_ACL category note
access-list 100 deny ip 172.20.32.0 0.0.0.31 all
access-list 100 deny ip 255.255.255.255 host everything
access-list 100 deny ip 127.0.0.0 0.255.255.255 everything
access ip-list 100 permit a whole
Remark SDM_ACL category of access list 101 = 17
access-list 101 permit udp any host 192.168.20.62
access-list 101 permit tcp any host 192.168.20.62
access-list 101 permit udp any host 192.168.20.61
access-list 101 permit tcp any host 192.168.20.61
access-list 101 permit udp any host 192.168.20.59
access-list 101 permit tcp any host 192.168.20.59
access-list 101 permit udp any host 192.168.20.58
access-list 101 permit tcp any host 192.168.20.58
access-list 101 permit udp any host 192.168.20.57
access-list 101 permit tcp any host 192.168.20.57
access-list 101 permit udp any host 192.168.20.56
access-list 101 permit tcp any host 192.168.20.56
access-list 101 permit udp any host 192.168.20.55
access-list 101 permit tcp any host 192.168.20.55
access-list 101 permit udp any host 192.168.20.54
access-list 101 permit tcp any host 192.168.20.54
access-list 101 permit ip 10.174.52.40 host 192.168.20.48 0.0.0.15
access-list 101 permit ip 10.174.52.39 host 192.168.20.48 0.0.0.15
access-list 101 permit udp host 172.21.0.1 host 172.20.32.17 eq non500-isakmp
access-list 101 permit udp host 172.21.0.1 host 172.20.32.17 eq isakmp
access-list 101 permit esp 172.21.0.1 host 172.20.32.17
access-list 101 permit ahp host 172.21.0.1 172.20.32.17
access-list 101 permit icmp any host 172.20.32.17 - response
access-list 101 permit icmp any host 172.20.32.17 time limit
access-list 101 permit icmp any unreachable host 172.20.32.17
access-list 101 permit udp any host isakmp 172.20.32.17 newspaper eq
access-list 101 permit udp any host 172.20.32.17 eq non500-isakmp
access-list 101 permit tcp any host 172.20.32.17 eq 443
access-list 101 permit tcp any host 172.20.32.17 eq 22
access-list 101 permit tcp any host 172.20.32.17 eq cmd
access-list 101 deny ip 10.1.0.32 0.0.0.31 all
access-list 101 deny ip 10.0.0.0 0.255.255.255 everything
access-list 101 deny ip 172.16.0.0 0.15.255.255 all
access-list 101 deny ip 192.168.0.0 0.0.255.255 everything
access-list 101 deny ip 127.0.0.0 0.255.255.255 everything
access-list 101 deny ip 255.255.255.255 host everything
access-list 101 deny host ip 0.0.0.0 everything
access-list 101 deny ip any any newspaper
access-list 102 deny ip 192.168.20.48 0.0.0.15 host 10.174.52.40
access-list 102 deny ip 192.168.20.48 0.0.0.15 host 10.174.52.39
access-list 102 permit ip 10.1.0.32 0.0.0.31 all
!
allowed NO_NAT 1 route map
corresponds to the IP 102
!
STATIC_NAT_8 allowed 10 route map
inside_nat_static_8 match ip address
!
STATIC_NAT_5 allowed 10 route map
inside_nat_static_5 match ip address
!
STATIC_NAT_4 allowed 10 route map
inside_nat_static_4 match ip address
!
STATIC_NAT_7 allowed 10 route map
inside_nat_static_7 match ip address
!
STATIC_NAT_6 allowed 10 route map
inside_nat_static_6 match ip address
!
STATIC_NAT_1 allowed 10 route map
inside_nat_static_1 match ip address
!
STATIC_NAT_3 allowed 10 route map
inside_nat_static_3 match ip address
!
STATIC_NAT_2 allowed 10 route map
inside_nat_static_2 match ip address
!
!
!
control plan
!
!
!
Line con 0
exec-timeout 30 0
line to 0
line vty 0 4
privilege level 15
local connection
transport input telnet ssh
line vty 5 15
privilege level 15
local connection
transport input telnet ssh
!
Scheduler allocate 20000 1000
end

VPN-RTR-01 #.

Hello

Configuration looks ok to me.

yet you can cross-reference with the following link:

http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080223a59.shtml

I hope this helps.

Kind regards

Anisha

P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

SRW2048 and a Cisco 1841

I am trying to Setup VLAN between a 2 and a Cisco 1841 router SRW2048 switches. I have ports that connect the 2 switches to the other and the port that connect to router as junction ports. I set 2 VLANS. VLAN 1 is just the vlan by default everyone runs and vlan will be the area demilitarized. I have no configuration of access control lists to block traffic, but when I assign vlan 2 on the port that the server is, I can not ping to the gateway. I don't know what is happening, see below for the cleaned configs.

1841:

Current configuration: 4282 bytes
!
version 12.4
no service button
horodateurs service debug datetime msec
Log service timestamps datetime localtime show-time zone
encryption password service
!
hostname QCSLOLURTR01
!
boot-start-marker
start the system flash c1841-advsecurityk9 - mz.124 - 25B .bin
boot-end-marker
!
logging buffered debugging 8192
!
AAA new-model
!
!
AAA authentication login default group Ganymede + local
the AAA authentication enable default group Ganymede + none
!
AAA - the id of the joint session
clock timezone CST - 6
clock to summer time recurring CDT
IP cef
!
!
property intellectual auth-proxy max-nodata-& 3
property intellectual admission max-nodata-& 3
!
!
no ip domain search
IP domain name qcsupply.com
!
!
!
user name x

Archives
The config log
hidekeys
!
!
x IP ftp username
x IP ftp password

!
!
crypto ISAKMP policy 1
BA 3des
md5 hash
preshared authentication
Group 2
ISAKMP crypto key QCSLOLU address x.x.x.x No.-xauth
!
!
Crypto ipsec transform-set esp-3des esp-md5-hmac ts1
Crypto ipsec transform-set esp - esp-md5-hmac ts2
!
VPN-map 10 ipsec-isakmp crypto map
defined peer x.x.x.x
Set transform-set ts1
match address 101
!
!
!
interface FastEthernet0/0
Description QCSL OLU INTERNET CONNECTION
IP x.x.x.x where x.x.x.x
IP access-group denied-hack-attack in
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
No cdp enable
card crypto vpn-map
!
interface FastEthernet0/1
no ip address
automatic duplex
automatic speed
!
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
IP 10.60.90.1 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface FastEthernet0/1.2
encapsulation dot1Q 2
IP 10.60.89.1 255.255.255.0
IP nat inside
IP virtual-reassembly
!
interface Serial0/0/0
no ip address
Shutdown
!
Router eigrp 100
Network 10.60.89.0 0.0.0.255
Network 10.60.90.0 0.0.0.255
No Auto-resume
!
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 x.x.x.x
!
no ip address of the http server
23 class IP http access
local IP http authentication
no ip http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
IP nat inside source map of route-nat interface FastEthernet0/0 overload
IP nat inside source static tcp 10.60.89.10 80 80 extensible x.x.x.x
IP nat inside source static tcp 10.60.89.10 expandable 443 443 x.x.x.x
IP nat inside source static tcp 10.60.89.10 2021 x.x.x.x extensible 2021
IP nat inside source static tcp 10.60.89.10 6100 6100 extensible x.x.x.x
IP nat inside source static tcp 10.60.90.13 80 80 extensible x.x.x.x
IP nat inside source static tcp 10.60.90.13 expandable 443 443 x.x.x.x
IP nat inside source static tcp 10.60.90.13 1494 x.x.x.x extensible 1494
!
deny-hack-attack extended IP access list
allow udp 0.255.255.255 x.x.x.x any eq snmp
deny udp any any eq snmp
deny udp any any eq tftp
deny udp any any eq bootpc
deny udp any any eq bootps
deny ip x.x.x.x 0.15.255.255 all
deny ip x.x.x.x 0.0.255.255 everything
allow an ip
!
record 10.10.5.30
access-list 23 allow 10.10.10.0 0.0.0.7
access-list 99 allow 10.0.0.0 0.255.255.255
access-list 99 allow x.x.x.x 0.0.1.255
access-list 101 permit ip 10.60.90.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 101 permit ip 10.60.89.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 105 deny ip any host x.x.x.x
105 ip access list allow a whole
access-list 111 deny ip 10.60.90.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 111 deny ip 10.60.89.0 0.0.0.255 10.10.0.0 0.0.255.255
access-list 111 allow ip 10.60.89.0 0.0.0.255 any
access-list 111 allow ip 10.60.90.0 0.0.0.255 any
SNMP-server community no RO
map of route-nat allowed 10
corresponds to the IP 111
!
!
RADIUS-server host x.x.x.x
RADIUS-server key x
!
control plan
!
Banner motd ^ C

x

^ C
!
Line con 0
line to 0
Modem InOut
Discovery to automatically configure modem
autohangup
Speed 2400
line vty 0 4
location * Access Virtual Terminal allowed only from internal network *.
access-class 99 in
privilege level 15
transport telnet entry
line vty 5 15
access-class 23 in
privilege level 15
transport telnet entry
!
Scheduler allocate 20000 1000
end

SRW2048 #1:

Port 1: Trunk (to the router)

Port 2: Trunk (SRW2048 #2)

Prot 24: VLAN 2

SRW2048 #2:

Port 1: Trunk (of SRW2048 #1)

Any ideas?

Because the SRW is now part of Cisco Small Business, it would probably be best to ask the Cisco Small Business support community. You find people from Cisco over there.

For SRW configuration, you added the two VLANS to your trunk ports? Configuration of a port in trunk mode adds automatically that all configured VLAN to the trunk.

The server has a static IP address in the DMZ LAN?

ASA to 1841 VPN Tunnel

Hello

I am trying to establish a VPN tunnel from site to site between 2 offices. An agency has a Cisco 1841 and the other a pair of ASA 5510. I get the tunnel to establish without problem. The problem is that traffic will the intended to the ASA 1841 will not encrypt to this particular tunnel. I get decaps on the session, but no program. I've reconfigured the tunnel several times but keep getting the same result:

Interface: FastEthernet0/1
The session state: UP-ACTIVE
Peer: 202.41.148.5 port fvrf 500: (none) ivrf: (none)
Phase1_id: 202.41.148.5
DESC: (none)
IKE SA: local 81.218.42.130/500 remote 202.41.148.5/500 Active
Capabilities: (None) connid:98 life time: 23:45:02
FLOW IPSEC: allowed ip 192.168.5.0/255.255.255.0 10.0.96.0/255.255.240.0
Active sAs: 2, origin: card crypto
On arrival: dec #pkts'ed 17 drop 0 life (KB/s) 4569995/2704
Outbound: #pkts enc'ed drop 0 0 life (KB/s) 4569996/2704

Any suggestions would be greatly appreciated.

Andy

Your ACL 100 is not exempt traffic 192.168.5.0-> 10.0.96.0 of the NAT process. Please add the line below above the permit statement and test again.

access-list 100 deny ip 192.168.5.0 0.0.0.255 10.0.96.0 0.0.15.255

Cisco 1841 ipsec tunnel protocol down after a minute

I have a strange problem where im manages to get a tha cisco ipsec tunnel 1841 to a RV016 linksys/cisco for about a minute and ping/encrypt the packets through the linen for about a minute before it breaks down. I tried different configuration and it all results in the tunnel for a minute then descend to come. I don't know if im hitting a bug and decide to if im doing something wrong.

any help is appreciated paul

RV016 firmware 2.0.18

Cisco 1841: C1841-ADVENTERPRISEK9-M), Version 12.4 (24) T

my config

no default isakmp crypto policy

!

crypto ISAKMP policy 1

BA 3des

md5 hash

preshared authentication

Group 2

lifetime 28800

ISAKMP crypto key address 0.0.0.0 eaton1234 0.0.0.0

!

!

Crypto ipsec transform-set esp-3des esp-sha-hmac ESSTS

transport mode

no default crypto ipsec transform-set

!

Crypto ipsec profile ipsec_profile1

Description in the location main site to site VPN tunnel

game of transformation-ESSTS

PFS group2 Set

!

!

!

!

!

!

!

Tunnel1 interface

Description of the location of the hand

IP unnumbered Serial0/0/0

source of tunnel Serial0/0/0

destination 209.213.x.x tunnel

ipv4 ipsec tunnel mode

tunnel path-mtu-discovery

protection of ipsec profile ipsec_profile1 tunnel

!

a debug output

Apr 24 16:42:07: IPSEC (validate_proposal_request): part #1 the proposal

Apr 24 16:42:07: IPSEC (validate_proposal_request): part #1 of the proposal

(Eng. msg key.) Local INCOMING = 209.213.xx.46, distance = 209.213.xx.164,.

local_proxy = 10.20.86.0/255.255.255.0/0/0 (type = 4),

remote_proxy = 10.0.0.0/255.255.255.0/0/0 (type = 4),

Protocol = ESP, transform = NONE (Tunnel),

lifedur = 0 and 0kb in

SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 0

Apr 24 16:42:07: mapdb Crypto: proxy_match

ADR SRC: 10.20.86.0

ADR DST: 10.0.0.0

Protocol: 0

SRC port: 0

DST port: 0

Apr 24 16:42:07: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

Apr 24 16:42:07: mapdb Crypto: proxy_match

ADR SRC: 10.20.86.0

ADR DST: 10.0.0.0

Protocol: 0

SRC port: 0

DST port: 0

Apr 24 16:42:07: IPSEC (policy_db_add_ident): src dest 10.0.0.0, 10.20.86.0, dest_port

0

Apr 24 16:42:07: IPSEC (create_sa): its created.

(his) sa_dest = 209.213.xx.46, sa_proto = 50,.

sa_spi = 0x4CF51011 (1291128849).

sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 2045

sa_lifetime(k/sec) = (4463729/3600)

Apr 24 16:42:07: IPSEC (create_sa): its created.

(his) sa_dest = 209.213.xx.164, sa_proto = 50,.

sa_spi = 0x1EB77DAF (515341743).

sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 2046

sa_lifetime(k/sec) = (4463729/3600)

Apr 24 16:42:07: % LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel1, sta changed

you to

Apr 24 16:42:07: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

Apr 24 16:42:07: IPSEC (key_engine_enable_outbound): rec would notify of ISAKMP

Apr 24 16:42:07: IPSEC (key_engine_enable_outbound): select SA with spinnaker 515341743/50

Apr 24 16:42:07: IPSEC (update_current_outbound_sa): update peer 209.213.xx.164 curre

NT his outgoing to SPI 1EB77DAF

Apr 24 16:42:12: IPSEC (key_engine): request timer shot: count = 1,.

local (identity) = 209.213.xx.46, distance = 209.213.xx.164,

local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

remote_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4)

Apr 24 16:42:12: IPSEC (sa_request):,.

(Eng. msg key.) Local OUTGOING = 209.213.xx.46, distance = 209.213.xx.164,.

local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

remote_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

Protocol = ESP, transform = esp-3des esp-sha-hmac (Tunnel),

lifedur = 3600 s and KB 4608000,

SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 0

Apr 24 16:42:42: IPSEC (key_engine): request timer shot: count = 2,.

local (identity) = 209.213.xx.46, distance = 209.213.xx.164,

local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

remote_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4)

Apr 24 16:42:42: % LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel1, sta changed

you all the downu

All possible debugging has been disabled

I would try to set up a VPN Interface virtual Tunnel on the IOS router base and the value of defined transformation in tunnel mode no transport.

In history, I have had several issues with VPN between a router IOS and the series RV.

Cisco router VPN Failover-

Hello Experts,

I have a very simple setup. I have a Cisco 1841 router with 3 interfaces. (1eth for LAN, 1eth to ISP2 and 1 eth for isps1).

I managed to create backup of VPN tunnel using course maps.

Now, I have to create a failover of VPN with a separate router. What is the best way to do it? Examples of configuration would be great.

This is my setup:

LAN - firewall-fire-(internal) router (isps1) = Tunnel VPN = VPN - Endpoint1

|

|

|

(Inside) Router (ISP2) = tunnels2 VPN = Endpoint2 VPN

So, the trick would be 2 VPN sites on 2 different routers configuration.

Thank you

Randall

Hi randall,.

Simple. Configure HSRP between 2 routers and create the same configuration on the 2nd router as well. Since the tunnel establish when there is always some interesteing traffic a router will be preferred. Simply connect two routers a switch and the inside interface in the same subnet.

Here is the link that I could help you

http://www.itsyourip.com/Cisco/how-to-configure-HSRP-in-Cisco-IOS-routers/

Let me know if you need more information

Concerning

Kishore

(Cisco IPSec) VPN on a Mac 1.6.6 where to start?

Hello

Has anyone of you be able to connect to a MAC BOOK pro with the build in VPN (IPsec Cisco's)?

Recently, I learned a little about the VPN connection and in the end, I was able to make a tunnel between my 2 routers of training C2611XM, but now, I would like to connect my computer from outside the House of my HAND CISCO 1841 ROUTER via a VPN tunnel.

Here below the SW and HW I have in the CISCO 1841:

NOTE: 1 Module of virtual private network (VPN), I think it's really VIRTUAL, the slot to put a VPN is always empty!

ANY SCRIPT or LINK TO is welcome

ROUTER1841 material #sh

Cisco IOS Software, 1841 (C1841-ADVSECURITYK9-M), Version 12.4 (24) T1, VERSION of the SOFTWARE (fc3)

Technical support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Updated Saturday 19 June 09 14:00 by prod_rel_team

ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1)

ROUTER1841 availability is 11 hours, 38 minutes

System to regain the power ROM

System image file is "flash: c1841-advsecurityk9 - mz.124 - 24.T1.bin".

This product contains cryptographic features and is under the United States

States and local laws governing the import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third party approval to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. laws and local countries. By using this product you

agree to comply with the regulations and laws in force. If you are unable

to satisfy the United States and local laws, return the product.

A summary of U.S. laws governing Cisco cryptographic products to:

http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html



If you need assistance please contact us by mail at

[email protected] / * /.



Cisco 1841 (revision 7.0) with 355328 K/K 37888 bytes of memory.

Card processor ID FHK1314219J

6 FastEthernet interfaces

1 module of virtual private network (VPN)

Configuration of DRAM is 64 bits wide with disabled parity.

191K bytes of NVRAM memory.

990360K bytes of ATA CompactFlash (read/write)



Configuration register is 0 x 3922

Best regards

Didier

You can follow the following guide to configure the router to access remote vpn:

http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801c4246.shtml

Also, this is the guide of installation and configuration of the vpn client

http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801c4246.shtml

integrated macOS Sierra Cisco IPsec VPN does not work anymore (impossible to validate the server certificate)

Hello

I just upgraded to macOS Sierra and built-in Cisco IPsec VPN no longer works. When you try to connect, I get a "cannot validate the certificate of the server. "Check your settings and try to reconnect" error message. I use Cisco ASA with self-signed certificates and everything worked fine with previous versions of OS X.

Please help me, I need my VPN Thx a lot

I am having the same problem with StrongSwan and help cert signed with the channel to complete certificates included in the pkcs12 file imported to the keychain. It was working properly in El Capitan, but now broken in the Sierra.

How to reset the password of the router cisco 1841

Hello

HAVA router cisco 1841 forgotten username and password and it had to rely on its setting default help pls

I tried boot while now ctrl and break enter rommon1 >

rommon1 > confreg 0 * 2142

rommon1 > reset

still shows rommon 3 >

pls help, he asks user name and password and don't remember them both

THX

J

You must start the router after that.

Type the rommon starting if you have set the boot variable correctly

Cisco AnyConnect VPN Client maintains reconnection

Hello

We have recently installed an ASA5505 and activated the VPN access.

Two of my colleagues have no problems connecting to the VPN using Cisco AnyConnect VPN Client, but I do.

I am still disconnected after a few seconds with the message:

"A VPN reconnect gave rise to different configuration settings. VPN network interface is to be reset. Applications using the private network may be required to restart. »

Cisco AnyConnect VPN Client Version 2.5.2019

I work with Windows 7 but the same thing happens when I try to connect using my computer that is running Windows Vista.

My colleagues also using Win7

I also tried to disable the Windows Firewall.

Any help would be appreciated.

Best regards

Peter

TAC has been able to solve the problem. For webvpn mtu changed default from 1406 to 1200.

Not sure why 2 other ASAs we work very well otherwise though!

WebVPN
SVC mtu 1200

Cisco 1841 VPN

Similar Questions

Maybe you are looking for