Cisco ISE white lists

Similar Questions

• Cisco ISE (Identity Services Engine) - seeds SGA device?

  Hello

  We have a LAB with Cisco ISE, certificates and list DACL. Everything works fine with the 1.1.1 version but now we want to use the functionality of CMS - SGT instead of the ACL and we found that we need seed for this device and the only device that takes in charge the Nexus 7000 is. Is this true? What is the only way that we can use LMS - SGT? Are there plans that any other device will be used to seed device?

  BR, Marko

  The device of seed set as first device that communicates with the ISE. It must be a link.

  http://www.Cisco.com/en/us/docs/solutions/enterprise/security/TrustSec_2.0/trustsec_2.0_dig.PDF

  In addition the Nexus needs a license of Advanced Services installed in order to support the Trustsec.

  I can't comment on any future plans.

• Press release cisco ISE 2.0

  Can someone please recommend a good book on ISE 2.0... again 2.0

  IMHO there is no good book on ISE 2.0 because there is no book of ISE 2.0 at all.

  IM aware of only three books on ISE:

  • CiscoPress: Unified Cisco ISE BYOD and blocked access
  • CiscoPress: CCNP security SISAS 300-208 official Cert Guide
  • Syngress: Practical deployment of Cisco Identity Services Engine (ISE): concrete examples of deployments AAA

  I did the first and also know each other. They n 't ISE 2.0 coverage. And looking at the table of contents of the third, it looks no better.

  Not a book at all, but the best documentation for ISE is ISE product page design guides: http://www.cisco.com/c/en/us/support/security/identity-services-engine/products-implementation-design-guides-list.html

• The band multiple @domaine used in user name on the integration of commercials with Cisco ISE?

  Hello

  How to remove multiple domain suffixes through ISE with AD user name used as an external identity Source. Username is used in [email protected] / * / format.

  Cisco ISE 1.2 patch introduced 4 Strip prefix or suffix @domaine Kingdom of the username through ISE with AD used as external identity Source. But the documentation is not updated for this feature. I am able to band 1 domain successfully suffix but following conditions listed in the list of suffixes fails to get stripped.

  Any thoughts on the same.

  Thanks Kumar

  In the ISE under Administration > identity management > external identity Sources

  Choose the Active Directory on the left, select your ad server and Advanced settings

  Under identity band of suffix, make sure prefixes band below: is selected (I know, it says prefix).

  In the list of Suffixes box, enter your list of domain suffixes to undress.  The separator character is a comma (,).

  

  If this does not solve your problem, then I fear that a call to TAC may be in order.

  UPDATE *.

  Spaces are significant characters.  The registration of domains, so as such:

  @domain.com, @domain.local, @testdomain.com

  END UPDATE *.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

  Post edited by: Charles Moreton

• Cisco ISE posture assessment and client provisioning

  Hello

  I have the Cisco ISE and Cisco IOS device. I configured the RADIUS between these devices.

  Also, I configured RADIUSbetween ISE of Cisco and Cisco ASA. Now I want to know that how to posture assessment for these devices (ISE of Cisco and Cisco ASA or ISE Cisco Cisco IOS). Please give me the steps together for assesment for cisco ios device posture in Cisco ise.

  In addition, please give me related to posture assessment and the provisioning client logs.

  Thanks in advance.

  You can go through the list link below to download a PDF link

  Assessment of the posture with ISE.

  http://www.Cisco.com/Web/CZ/expo2012/PDF/T_SECA4_ISE_Posture_Gorgy_Acs.PDF

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• you want to create the white list. How to do?

  I want a white list, but cannot find a place for it. I see < block sender >, but I want to create a list < allow >. Thank you.

  From any of your address books, you can just whitelist people. Go to Hamburger-> Options-> account-> [account] settings-> junk e-mail settings, to enable adaptive junk mail for this account controls and check address books you want from a whitelisted addresses.

• How can I 'white list' an add on in Firefox?

  I use Firefox 25.01 in my Ubuntu 13-10 machine. I don't know what that means "white list" or the place where accomplisht the task. I have Firefox sync, but can never remember the password assigned to me so the sync option is not useful for me. I want to use an addon that I've used in the past, but after installation it tells me to whitelist it.

  What is the name of the extension and the URL on the Mozilla Add-ons site or the Web site where you have downloaded and installed?

• HP Pavilion 15-ak101nq Gaming: wifi card white list

  I want to know if my hp Pavilion has a white list the card wifi and I have shearched all on internet but I did not found any information about this then I would be happy if anyone knows if my laptop has one, or if I could install a?

  Hello:

  There do seem to be blocking BIOS more in order to avoid to install another wireless card.

  But just as bad, you will find on many HP laptops with single band card, only a wireless antenna is present.

  Unless you're ready to take the laptop share everything, including the area of display panel to run an antenna 2, you will not be able to upgrade the current map, because maps dual band require usually two wireless antennas.

  Then... you will have to physically inspect the current map and see if there is one or 2 antennas are and decide for yourself what you want to do next.

  Now, I've heard about some of the new laptops, HP began to install a second antenna and leaving that it disconnected, if it is equipped with a single band with a single terminal card.

  Do not rely on the photos in the service manual to determine if your laptop has 2 antennas.

• Pavilion dv6-7000 WLAN white list

  Hello!

  I want to spend my my 2230 Centrino Wireless N WIFI card to something like the Intel Dual Band AC 7260 or just a better card WLAN N. I know there is a white list of cards that are accepted by the BIOS in the user manual, but I was wondering if when you make updates to the BIOS, this white list is updated for more cards to date. Is there a way to verify or update the whitelist?

  The current BIOS I have seems to be:

  HPQOEM - 1
  InsydeH2O Version 03.71.51F.29

  If there is no update white list or something like that, what card is authorized by my current BIOS is the best?

  Any help or comment would be greately appreciate it.

  Thank you!

  SantiagoP wrote:
  

  Hello!

  I want to spend my my 2230 Centrino Wireless N WIFI card to something like the Intel Dual Band AC 7260 or just a better card WLAN N. I know there is a white list of cards that are accepted by the BIOS in the user manual, but I was wondering if when you make updates to the BIOS, this white list is updated for more cards to date. Is there a way to verify or update the whitelist?

  The current BIOS I have seems to be:

  HPQOEM - 1
  InsydeH2O Version 03.71.51F.29

  If there is no update white list or something like that, what card is authorized by my current BIOS is the best?

  Any help or comment would be greately appreciate it.

  Thank you!

  Hello

  No need for anything to change. If the white list is present, it can certainly 6235 Intel and Intel 7260 AC. I tested both myself (using the 7260AC now, see the signature) and no problems at all. Just buy the chip, put it in and start. 2230 Intel use the same drivers as the above mentioned chips.

• HP Envy 17 j199ez: HP Envy 17 j199ez bios white list?

  Hello

  I have a HP Envy 17 of j199ez with the Bios of Rev.A F.68 (latest version). Will there be a white list in the BIOS that prevents the installation of cards mPCIE not approved beforehand? (I.e.: bios will prevent the system starts with "device" error unsupported wireless, because it doesn't have the device ID in the list of approved cards)
  
  I heard that HP has ceased his practice whitelisting some time ago, but I don't know if my device is affected & I have an upgrade at little cost for a better wireless card without fear that this specific device ID is 'not supported' (ID devices differs sometimes even on the same model cards which can be very annoying)
  
  We hope not only to get a copypasta 'don't use HP certified parts', but in reality a response to $subject, so I can't open my other laptop and try his old card atheros just to see if it is locked or not.
  
  Thank you.

  You passed the white list. No problem. Any wireless card, correct form factor will work. I had the run of 17-j000 Envy which is slightly older than yours and based on personal testing, whitelist was not present.

  Not a stock response.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Pavilion 2355sa g6: Pavilion g6-2355sa white list for wireless cards.

  "My wireless card is one band and obtaining years, allows you to go buy a new '... and then the white lists came to my attention to ruin everything!

  Does anyone have a definitive list of what works in this laptop? I wanted to buy a dual band card, but the list in the maintenance manual is pathetic!

  I updated the BIOS to the latest F.26 version from the support page. This addition will build for the cards more than those included in the manual of support?

  For reference, my laptop currently has the Ralink RT5390.

  TIA.

  Solid information are very difficult to find that the white list is now history, and HP does not now and has never been very next. We at the Forum dealt with him for years and the best we can say:

  1. the list of "dismal" in the manual is the whitelist, sorry to say and the list you will get. You can be 100% sure that settle a part HP copies numbered from one of these cards, the machine will start. Sometimes we had evidence of exceptions to this rule but not very often and not in any pattern it has been possible to understand.

  2 BIOS updates from HP do not expand the white list.

  There are 'hacked' BIOS sources on the internet and we have had some reports that they work and cause no other errors. This one in particular, which I think can be applied to your laptop, but I wash my hands. I wouldn't, but I give you the choice:

  http://donovan6000.blogspot.com/2013/12/modded-BIOS-repository.html

  If it's 'the Answer' please click on 'Accept as Solution' tp help others find it.

• Facebook blocked: something about a black or white list blocksite?

  How can I add facebook to a whitelist?

  I get an error message when I try to open the page: something like this site, or items, therefore, on a blacklist of blocksite (or not on a white list)...

  (I was block adds on fb more earlier; maybe that's how he fell into a blacklist?)

  I'm no computer expert, so all responses must be simple and clear, with more details that you want to use for a more informed user.

  Thank you!!!

  Kate

  Hi katecwatt,

  Mozilla Firefox is currently one of the fastest and most popular web browsers in the world. Measure of the million daily active users, Firefox highlights promising free thousands of Add-ons to make your experience fun and safe surfing. One of the best Add-ons is the 'BlockSite"allowing its users to block / unblock websites at any time.

  The add-on "BlockSite" is a free extension for Mozilla Firefox with an easy black access list. From here, you can manage the sites you want to block once and forever. Sounds interesting?

  Here's how to block websites in Mozilla Firefox

  the category of elements of the strategy of the custom (with page custom URL categories) and the L4 ... Therefore, you may need to configure the browser pop-up blocking settings in order to use the ...

  http://blog.didierstevens.com/2007/07/03/the-BlockSite-Firefox-Add-on/

  http://voices.Yahoo.com/how-block-websites-Mozilla-Firefox-7843204.html

• Cisco ise license command

  I have a question

  1. is it possible to install the Cisco ISE software on the server machine to physical HP (without solution VMware or without the use of SNS-3415-k9 cisco device)?

  2. for 2500 users online, I'll order L-ISE-BSE-2550, L-ISE-PLS-S-2500 and L-ISE-APX-S-2500 of basis, more and apex licenses. My question is HA (primary and secondary) application I need 2 licenses for each? (2 * L - ISE - BSE - 2550, 2 * L - ISE - PLS - S - 2500 and 2 * L - ISE - APX - S - 2500)

  or just a license for each is enough?

  3. If I implement Cisco ISE and HA on VMware environment, can I 2 L-ISE-VM-K9 licenses for each VM machines? and also I need 2 licenses for each basic, plus, and at the apex?

  4. What is smart net Cisco and Cisco SASU? need to buy these for support and ticketing system?

  5. What is license for cisco anyconnect (L-AC-APX-1 year-G)?

  thnx in adv.

  You can install ISE on a HP ONLY Server if you are using software virtualization (VMware or KVM).

  The Guide of Installation of ISE sets out three options:

  1 hardware appliance from cisco SNS

  2. virtual machine VMware

  3 Linux KVM.

  The AnyConnect license is required to qualify with the features of the Apex. It is not installed on the ISE server, however.

• Cisco ISE with GANYMEDE + and RADIUS both?

  Hello

  I'm wired opening of authentication on a network using Cisco ISE. I studied the conditions for this. I know that I need to enable the RADIUS on the Cisco switches on the network. The switches in the network are already programmed to GANYMEDE +. Anyone know if they can both operate on the same network at the same time?

  Bob

  I suppose that Ganymede is configured (with ACS 4.x or 5.x) for the peripheral administration via telnet/ssh, and now you need the RADIUS (radius) to authenticate 802. 1 x. Yes they can both work on the same network at the same time.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Cisco ISE 1.1.2.145 Admin authentication via the LDAP protocol

  I have configured the LDAP protocol and able to retrieve our LDAP directory structure. Now, I'm trying to point authentication "Admin Access" Source 'External identity', which is the new LDAP IS I created. But I couldn't find an option to authenticate locally if for some reason the LDAP configuration does not work. I learned that the ISE can automatically return to local auth as external sources Idenitity are inaccessible. How can I test the LDAP authentication with breaking them our Admin Access? I thought to open two parallel sessions, one with Super Admin account Local and one with the domain account. But I noticed that ISE communication is smart enough for the closing session/connection no matter what other sessions in different browsers so, basically, I can't open two parallel sessions the same machine to test. Suggestions? or am I missing something here?

  Thanks in advance.

  Hi Srinivas,

  Even if you configure LDAP as a source of external identity of admin access, you can always internal relief without having locked. According to the ISE user guide:

  During the operation, Cisco ISE is designed to "fall back" and try to perform the internal identity database authentication, if the communication with the external identity store has not been established, or if it fails. In addition, whenever an administrator for which you have configured external authentication launches a browser and initiates a logon session, the administrator must still the option authentication of demand through the local Cisco ISE database by choosing 'Internal' to the Selector drop-down storage of identity in the Connect dialog box.

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/user_guide/ise_man_identities.html#wp1351543

  Please see the attached screenshot by my lab ISE:

  

  I configured the admin authentication against AD, but I still see both 'Internal' and 'AD' at the time of the connection.

  I hope this helps.

  Thank you

  Aastha