Cisco SRP527W-U feature question

Similar Questions

• Cisco SRP527w cannot find the user management tab

  Hello

  Can someone help me? I just bought a new Cisco SRP527w and I'm all new to this type of material. I can't find the tab for user management that I'm changing the default password.

  Also, I can't access the internet. My rj45 of the ADSL modem is connected to the WAN/LAN port with parameters IP static. What missed here? your help is very appreciated.

  Hi Ronald, if you are clicking on all other tabs and it still seems only the setup of the wizard, you must change your internet browser. Try Firefox or IE. This should solve that.

  -Tom
  Please evaluate the useful messages

• First Cisco infrastructure reinstall - license question

  Hello world

  Here's the scenario, the Cisco IP running is v1.1 (w/c at the moment is still called Cisco NCS (Network Control System) and unfortunately, she appeared.

  Re-Setup was planned and they want the latest version, w/c is 2.1 installed.

  Now, here are the questions:
  1. How can I transfer my license? Should I key PAK? If so, it will remain usable for the new Cisco PI?
  1.A. How can I do? I mean transfer the license?

  2. the devices not supported on the upgrade?

  It's quite deep-research question, I would say. I do research in fact the answer right now, but hope someone can help me :)
  I have a version of thread hard time considering that it's an old of it (and he even existed in the old name too!)

  Thank you! : D

  You can move your PI 2.1 license.  Email [email protected] / * /.

• Notice to Cisco employees who ask questions

  Would it not possible to display a screen to tips for Cisco employees when they appear?

  I understand that they need to find answers for them and their customers, but some of their questions are a bit annoying, for example "How do I configure OSPF?

  In the old interface, there was a banner when you want to create a new discussion, but I tried it and now you get nothing, if you try to create a new thread.

  I agree that old warning on the accounting should be, I mean, we have a lot of internal resources, we can use instead.

  Java

• Cisco Anyconnect license upgrade Questions

  Hi all

  So, we currently have a pair of failover ASA 5515 - X running at one of our sites. This serves as a VPN gateway for our users. I am migrating users from the old Cisco VPN client to the newest Cisco Anyconnect client. I have work and installing anyconnect. Meanwhile, I discovered that process to take care of TLS 1.1 and using the Anyconnect client, you must use the most recent 4.0 Anyconnect client. To use this client, you must have something license called a "Anyconnect more" I think it was a recent change of return in 2014. We currently have the Anyconnect Essentials license installed on the ASA pair. I discovered that not only it a license upgrade available for upgrade Anyconnect positive of the battery, but the Anyconnect Plus license is subscription now. Boo Cisco. But that's another debate.

  I went ahead and reluctantly bought the upgrade license to upgrade Anyconnect positive of the battery. I am trying to understand however the affects of the installation of this license with respect to the current VPN functionality. Currently, we offer the following VPN options for our users:

  RA IPSEC (IKE v1via former customer)

  RA IPSEC (L2TP via the Windows client)

  SSL (Anyconnect 3.0)

  We also use tunneling IPSEC of P2P (IKEv1 PSK) between two sites to serve as a link of relief when our primary site-to-site link fails.

  If anyone knows what would be the effect on the current VPN functionality when installing my upgrade license? He turns off the older IPSEC IKEv1 feature? As I said I want to migrate to the newer platform users but still have need of the oldest customer work until this can be done. I have this in my current setup:

  WebVPN

  AnyConnect essentials

  What happens on this command when I apply the new license?

  Appreciate any help here. Thank you.

  Addition of the new activation key and the client configuration somehow 4.x will not affect the IKEv1, L2TP or VPN SSL. "AnyConnect essentials" rest a command active and valid

  It will give the ability to activate the advanced security features that require the 4.x client.

• Adjust margin SNR on Cisco SRP527W-U?

  I have a new srp527w-u Cisco router which works fine even if it is the synchronization at a lower rate than my billion (6 Mbps vs 8.5 mbps for billions on the same line).

  I had twisted the way billions back to connect with a 4db SNR margin, and almost certainly, that's why it has the highest rate (by comparison, the cisco is synchronized with a 12 dB snr margin). Is it possible that I can configure it to use a SNR margin? I know that this could reduce the stability of the connection but I would at least be able to give it a try if possible.

  Thanks for any help!

  Hi Louis,.

  This level of configuration is not possible with the SRP500.

  Andy

• Cisco SRP527w Firmware/urgent fix

  Hello

  Having used various equipment cisco for years, I thought it would be a good idea to use an ADSL router for a job I'm doing for a client so I bought a SRP527w. I now regret buying it because it crashes regularly and needs a restart of the client which is annoying to say the least. The wireless sometimes stop routing requests to the DHCP server and what they lose connectivity. Also after a period of time the web interface stops responding if the traffic is still passing through the unit.

  Can someone link me please for the latest firmware and how to install it.

  Current firmware is:

  1.01.09 (001) April 7, 2010

  Thank you

  Hello Matt Clifford - the new firmware for the SPR527W is currently at 1.01.19. You can download this firmware on our Cisco.com site.

  I enclose the following link which should bring you to the download page for the new firmware.

  http://www.Cisco.com/Cisco/software/release.html?mdfid=282910822&flowid=797&softwareid=282919993&release=1.01.19&relind=available&rellifecycle=&RelType=latest

  When you download the new firmware save it on your desktop or somewhere where you want. Is the default IP for the SRP527W

  192.168.15.1. I would sign in the router using admin as the user name and password is Admin (there are 2 different users that you can use to connect to)

  This router - you can use cisco as id user and password or admin as password and user id. With the help of admin, you get more options when configuring the router) when you are in the interface of the router go to the Administration tab and you will see the option to upgrade the Firmware.  Navigate to the location where you placed the new firmware and then choose the file and begin the upgrade. After the router performs the upgrade, it is advisable to perform a factory reset on the router. Just hold in the reset button on the router

  for at least 30 seconds. After that, you should be ready to configure your settings and hopefuuly, you should be good to go.

  Thank you

  Rick Roe

• Cisco SX 20 past question call composition

  Hello team,

  Hello team,

  We use Cisco SX20 and configured the public Ip address,.

  We can receive the call for outside call but not in outgoing call, I tried several public IP address for the test, but none of them does not.

  There is no guardian, address Public Ip directly to the configuration system.

  Please suggest the same

  Thanks in advance

  Are Set - up mode set to 'Direct' call and you specify H.323 call Protocol?

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Cisco NAC device filtering question

  Cisco NAC provides support for devices such as printers, IP phones, UPS failure, etc. by adding them to a list of filters.

  This allows these devices to bypass basically the NAC system and is only available on the network.

  My question is this. If exempt us these devices of the NAC evaluation, where is the security? What prevents a person to set the MAC address of the printer using a laptop?

  I can't imagine on this subject has not been raised before, but I can't seem to find an answer.

  Thanks in advance for your answer!

  Tom

  Well Yes, it was a big critical with the NAC device out of the box. There is no way to prevent the usurpation of MAC. Cisco has another device called parser SNAC, that solves this problem, but it costs extra.

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5707/ps8418/ps6128/product_data_sheet0900aecd806b7d4e.html

• Cause the v5.3 TCS Cisco - database consolidation write questions

  Hello - our deployment involves two boxes of tcs of clustering. While we have created the first node in the cluster with integration of Backend successfully in NAS and SQL, we have questions, add the second server to the cluster due to a database write failure of the operation at some stage. Is attached a screenshot for reference. Error is ' write data to destination... Tandberg.DatabaseTransfer.DatabaseDataDestination... »

  From the point of view of database permission, we have permission granted and which are especially as the first server is connected to the sql cluster higher. Looking at the newspapers, other operations initiated during the second node of tcs add in the cluster to write succeeded. However, this specific write operation failed.

  From a troubleshooting perspective, beat the node primary tcs in the couple of cluster of times and tried to rebuild the cluster. But that is not the problem of fixing.

  Any input would be much appreciated

  Thank you

  PGM

  Sent by Cisco Support technique iPad App

  Hi Srinath, I see the error indicating that the name of the instance is "Null", it returns NULL if the instance name is the default instance, if the entry is not valid, or a mistake.

  What you might try to return to the local db, do a proper backup of all records and create the new instance of the database with a name.

  The new attempt of grouping again.

  Best regards / / Andrey

• The Remix feature question

  Hello

  I have a song I need to shorten (03:20 to 02:40). I tried with the remix feature (which is really cool btw.!). But what he has done, he cut a part of the song I want to have. So my question is, is it possible to mark parts of the song that we absolutely want to stay after the remix feature was used?

  Thanks in advance,

  Michal

  Not in this first implementation, however, there are a few tricks that you can use that might help.

  Remix always uses the start and end of the clip in the clip of Remixed.  If you want to guarantee a certain segment of song comes generally, or at a specific time, you can try to divide the original clip right here, and then the remix of each half separately.  For example, say that I was going to use Remix with Led Zeppelin "over the Hills and Far Away" (of right, of course!) and I wanted to align the part where the metal guitar starts with a special edition in my video.  I split the audio clip at the beginning of the game, then align the 2 collars so that the split lines up with the video image with that I want to synchronize.  The remix of the first part of the clip, then the second, without active stretching.

  If there is a specific segment you want, but are flexible to the ends, you can split the clip into 3 segments and remix just external clips.

• Ethernet VMware with Cisco EtherChannel and Trunking Question

  Hello

  Trying to get our etherchannels works correctly with our network administrator. Here is our config with a few questions.

  1. as it is to create the trunk between switch and host directly, can I use spanning tree portfast chest edge ?

  2. when don't we use no ip address and when not for this configuration? I see online showing examples with and without it.

  3. in some articles, he described in access mode , while in others he said dot1q trunk mode. See here for the access mode. Admin think it should use dot1q.

  4 Etherchannel is fully support and preferred extending from links on maps, right? Not all of the links on the same card?

  5 is this the case in order to change the load balancing algorithm in vmware first or first to the work of cisco? I did first vmware. (IP-hash)

  It's on a series with 4 cards/blades 6500 switch.

  !
  interface Port-channel200
   switchport
   switchport access vlan 81
   switchport trunk encapsulation dot1q
   switchport trunk allowed vlan 69,81,172,896
   switchport mode trunk
   switchport nonegotiate
  !
  interface GigabitEthernet2/35
   switchport
   switchport access vlan 81
   switchport trunk allowed vlan 69,81,172,896
   switchport mode trunk
   switchport nonegotiate
   spanning-tree portfast edge
   channel-group 200 mode on
  !
  interface GigabitEthernet8/10
   switchport
   switchport access vlan 81
   switchport trunk encapsulation dot1q
   switchport trunk allowed vlan 69,81,172,896
   switchport mode trunk
   switchport nonegotiate
   spanning-tree portfast edge
   channel-group 200 mode on
  

  DITGUY2012 wrote:

  Wow Josh. If only you had written documentation. That's the trouble with him. People like me get final instructions, because we're not the guys from network 24 x 7. Great documentation would be layout, the reasons to go this way or that way you did just. That being said, here's my summary based on this discussion.

  1. we have several VLANS that descends from 3 links on the etherchannel. Thus, we should use mode trunk because there is not a single.

  2. we have an another etherchannel with just 1 vlan (vmotion), but in all of two links. This should be the access mode. Or is it still trunk because it's the multiple links?

  3. I don't know what crash dump logger is, or how it applies to my situation.

  4. I saw the bpduguard setting before what exactly is the syntax to use for us? 6500 series.

  5. I don't know if our switch would deliver on that port. How can I tell? At this moment I have switchport setting in there.

  Thank you!

  No problem for reference, the other question of documentation is one of the languages. Their word etherchannel on HP networking hardware, 'trunk' and has nothing to do with the discussion of port "access vs circuit", which they call "tag unidentified vs.

  1 Yes

  2. you would certainly make an access port.

  3. If your server never begins to have a problem with break, VMware can a copy of the accident for the debug log. You can see an article on setting up here: put in place the collector of Dump ESXi 5.0 | VMware vSphere Blog - VMware Blogs.

  4 I'm sorry I'm not familiar with this model

  5. I think if the switchport parameter is here and connectivity seems to work, you can consider yourself safe

• Or is the firmware of the cisco SRP527W please?

  Hello

  Now everything is in the title, indeed after a google search I find this page here: https://supportforums.cisco.com/docs/DOC-13853, I think that it is the privilege downloads Firmware SRP520 but it's 404 error. I'm afraid of being mistaken as the series is not accurate.

  Do I know or is the page of list of firmwares.

  Thanks in advance.

  Yes, those that should be good for the download.

  If you want browsing the Cisco's Web site, you can follow this instruction:

  • Go to www.cisco.com and click support

  

  • Click downloads, and then type SRP520, and then you can choose SRP520 or SRP520-U

  

  • At present, the page is interrupted by error 404

  

  -Tom
  Please mark replied messages useful

• Cisco ISE 1.3 question Active Directory

  Hi people

  I'm having a problem with our Cisco ISE and would love some comments or a solution. I configured to ISE to use our Active Directory setup and so far it seems to be functional. I could connect to retrieve ad groups and use AD for authentication. The problem I encounter is that when I try to go to the ' Administration > Identity Management > Sources external page and select our instance AD in the window side left hand screen hangs and won't load.  Any advice?

  ad_error.PNG

  

  You are using a supported browser and have you tried an alternative one?

  If you are using a supported browser, it looks like a bug in the layout of the page. I was opening, in this case, a case of TAC. I had this same work of page very well for me in the three different 1.3 deployments.

• Cisco UCS C240 M3 questions

  Hello

  I'm trying to install VMWare ESXi on a Cisco UCS C240 M3 and have a few problems.

  I configured the other servers before, but never a Cisco UCS.

  Firmware versions

  v1.5 (7 c) I could not load the KVM as I have a problem of Java. I am running Java v1.6.0_27 on my client.

  v2.0 (1B), the server kept by booting to the BIOS and seemed to ignore other startup options

  v2.0 (3d) the keyboard no longer works in KVM.

  Startup options

  There are a lot of startup options, and they seem to be configurable in many different places.

  I don't know where to start or what would be best practices?

  Nothing seems to work I'm waiting, and I did a lot of reading through documents, help, etc. online.

  My local Cisco support person on vacation so I hope someone can help me or guide me in the right direction.

  Thank you & best regards

  Steve

  Glad you found a way to fix it, don't forget to mark it as answered future users finding themselves in the same situation.

  -Kenny