First Cisco infrastructure reinstall - license question

Similar Questions

• Not found 1.2 OVA first Cisco infrastructure

  Hi all

  I want to download Cisco first Infrastructure 1.2 EGGS but I don't find it, it has just "Cisco first 1.2 Plug and Play Appliance Virtual Infrastructure " " ". " What is the good EGGS?

  Thanks for your help

  BR

  Karam

  Hello Karam,

  Unfortunately this download of this file is no longer available on the cisco.com site.

  As an alternative, you can download IP 1.3 OVA, where you can find the same characteristics and
  Interface:

  http://software.Cisco.com/download/release.html?mdfid=284652876&software...
  to = 1.3 & relind AVAILABLE = & rellifecycle = & reltype = all

  Note: you can use the same license of IP 1.2 on 1.3 FT

  Thank you-

  Alya

  Ratings encourage contributors *.

• First Cisco Infrastructure

  Hi all

  We used to have automated Action Syslog LMS 4.2 (according to syslog messages, it will trigger one of the script files). Now, we have migrated to first Infrastructure 2.0. Can you one please advise how I do the same thing in this?

  Thanks a lot for your answer.

  Hello

  With a prime Infrastructure, as of now, we have less characteristic on syslogs and automated action film support syslog is is not available at the moment.

  Thank you-

  Alya

  Ratings encourage contributors *.

• The limit of the device must be less than or equal to the limit of life cycle license in first cisco 2.2

  Hi all

  I have seen under error in the tool main 2.2 Cisco infrastructure

  The limit of the device must be less or equal to the limit of license of life cycle and also secondary device ISE inaccessible since premium.

  Could you please suggest how we can solve your problem.

  Thanks in advance...

  Kind regards

  Sachin

  Yes. Life cycle license are by smart device managed. See this page for a good overview:

  http://www.Cisco.com/c/en/us/support/docs/cloud-systems-management/Prime...

  .. as well as this page:

  http://www.Cisco.com/c/en/us/products/collateral/cloud-systems-Managemen...

  .. who States:

  Life cycle license: allows access to all the features of the life cycle, which includes the configuration of the devices, image management software, basic health and performance monitoring, fault management, troubleshooting and customer visibility on the network. The license of the life cycle is based on the number of managed devices. Life cycle of the licenses are available in sizes from package of 25, 50, 100, 500, 1000, 2500, 5000, 10,000 and 15 000 devices and can be combined as needed to reach a total number of device under license.

  A device is uniquely identified through the assigned IP address and system object ID (SysOid). Routers, switches, light/unified access points and network first Cisco (NAMs) analysis Modules are charged on the number of licenses. If a switch stack is managed via a single IP address, it counts as a single device. A single frame will, however, be counted as multiple devices if the chassis is configured with several IP addresses. For example, a switch with several service cards, such as a firewall and so forth, or a stackable switch with an IP address assigned to each switch who is involved in the stack is considered multiple devices within the first Cisco Infrastructure. Cisco Wireless LAN controllers (WLCs), autonomous and peripheral access points third are not counted against the number of licenses.

  When you have more devices that licenses, you will receive the error see you and prevented from adding additional devices to your inventory.

  We see it more often when it is light (i.e. not independent) APs are added to a wireless controller. PI will not prevent the new APs to be added, they are managed under their association with the WLC. However, if you try to add a new switch it would prevent you to do until the deficit of licenses has been sent.

• Mobile application Infrastructure first, Cisco

  Hi all

  I need to download the mobile application for the PI and I donot find?

  I need your help.

  Hi Mohamed,

  It is available on the Apple App Store.  I just checked the store from my iPhone and see.  Try searching on "First Cisco" and you should see the first Cisco application as well as the Cisco Plug-And-Play application.

  See you soon,.

  Chris

• vCenter VDI Licensing questions

  Hello

  Basically, my question is if a standard of vCenter license can manage hosts with VDI and Non - VDI workload without violating the EULA.

  For a more detailed explanation, please see below:

  Thank you very much in advance

  concerning

  Luis

  ----

  Environment:

  -vSphere 4

  -Cisco UCS

  Customer has acquired the following licenses:

  -1 vCenter server standard (Cisco OEM)

  -vSphere Enterprise Plus for 16 cores (Cisco OEM)

  also, as VDI will run on the VI client thus acquired a set of 5 view come with:

  -1 Server vCenter for VDI

  -See the first 5 Add - on licenses (200)

  -vSphere Enterprise more to View 5 (200)

  The current implementation has a unique vCenter and 8 blades, divided into two groups:

  -6 guests for Admin more application VMs

  -2 VMS VDI host

  Scenario has):

  -If we use the vCenter VDI license, according to the "View4LicensingFAQ.PDF" of VMware, support Non - VDI running in a VDI VI is not allowed (see below)

  Q: can I run other workloads from server on the vSphere which is included in the view?

  A: No. vSphere and vCenter beam view components are limited to desktop deployments.  A desktop virtual machine is defined as a virtual machine that is running the following operating systems:

  Windows 95/98, Windows 2000 Professional, Windows XP Professional, Windows Vista Ultimate, Windows Vista business, or Windows Vista business, Windows 7.

  The only exception to this rule are the elements that make up the virtualized infrastructure Fund (View Manager, vCenter Server, a Broker for the connections and/or management and tools used for Virtual Machine (s) of Office ESX hosted within an operating system of a server performance monitoring only).  Download the EULA here for details http://www.vmware.com/download/eula/.

  Scenario B):

  -If we use the Standard-vCenter vCenter license, according to the "View4LicensingFAQ.PDF" of VMware this is not recommended (see below)

  Can Q: you the customer mix vSphere hosts who have licenses from the beams of the view and vSphere license via vSphere la carte?

  R: a mixed environment is not recommended because there is risk of workloads server live-migration of a cluster of vSphere (via VMware vMotion™) in a scenario of disaster recovery for a license to view vSphere host, what would constitute a violation of the EULA. Guests are asked to keep their separate environments or buy to the map view to entitle the deployment of a mixed environment vSphere, vCenter, and licenses.

  
  Leaving apart from the facts that:

  -View licenses need to be reclassified from vSphere5 in vSphere4

  -The client may have bought more than necessary licenses

  My thoughts are:

  • -I have not read anywhere that the use of a Standard-vCenter to cover the VDI and the workload of Non - VDI is not possible at the technical level.
  • -I'm not 100% sure that it is aligned with the EULA
  • -Similar situation for ESXi hosts accommodation VDI VMs licenses

  If you use the view bundle vCenter only VDI workloads are allowed.    If you use vCenter who bought outside of the whole of the display, you can run anything you want with it.

• Unity double switch integration - licensing question unity 4.0 (3)

  Unity double switch integration - licensing question unity 4.0 (3)

  The unit was sold as a single IP integration. My client needs Dual Switch with an Ericsson PBX. I received the license key of ORC, and I opened a folder of TAC.

  TAC said that the license file will not allow installation double switch integration. The Cisco SE on the account indicates that the license key will allow me to make the integration of the double switch.

  Who is right? I heard that the moderator here has all the answers :)

  The is correct. Any customer with a license 4.0 can do double switch. You don't need a special permit.

  Thank you

  Keith

• First Cisco 3.0 crashed after installing pi_technology_package - 3.0.2 - 1.0.56

  Hello

  Our first Cisco 3.0 after installing pi_technology_package - 3.0.2 - 1.0.56 crashed. SSH is available but not Web.

  Here is the story:

  1-. OVA installed

  2-. Installed the following hotfixes:

  Feature-Pack-3 - PI3.0 - 25.ubf

  4-Pack-device - PI3.0 - 15.ubf

  pi302 - 16.ubf

  pi303 - 10.ubf

  Server rebooted and everything seems to work fine.

  3-. Installed pi_technology_package - 3.0.2 - 1.0.56, rebooted and web server doesn't work anymore.

  We tried to restore a previous backup, perform a reset of db ncs and restart the ESXi machine, but without success.

  genpro01 / ncs status admin #.
  Health Monitor runs with an error. (Primary [role] [State] not configured HA)
  initHealthMonitor(): cannot start DB
  Database server is stopped
  FTP server is running
  TFTP Server is running
  MATLAB Server is running
  MATLAB Server Instance 1 is running
  MATLAB Server Instance 2 is running
  NMS server is stopped.
  Gateway of CNS with port 11011 is down
  CNS with port 11012 SSL gateway is down
  Gateway of CNS with 11013 port is down
  CNS with port 11014 SSL gateway is down
  Plug-and-Play bridge with port 61617 broker is down
  Plug n Play bridge config, image and resources are declining over https
  Plug-and-Play gateway is stopped.
  SAM Daemon is stopped.
  DA Daemon is stopped.
  genpro01 / admin #.

  Any suggestions?

  Kind regards

  David

  David,

  Unfortunately things can get really watered (technical term) with the database if the application (ncs) server is not restarted after each pack of patch installation or device. Later versions of patch began by pointing out that right from the start.

  I would say that you have two options-

  1 rebuild from scratch and just re - import devices. It is a self-service option.

  2 open a TAC case and see if they can recover the current state. The reports I got colleagues and read elsewhere here is the recovery of a failed installation of this tech pack was difficult at best.

  Sorry to be the bearer of bad news.

• IPS UPDATE LICENSE QUESTION

  Hello

  We have recently updated the contract to get updates for IP addresses, but we get the error message attached when we try to get with the cisco username and password updates that contain the contract.
  someone knows this error?

  Hi El Salvador,

  This error may be the cause of the update contract not completely.

  Have you tried to generate the license manually of cisco.com/go/license file and download even on IPS? Please try it once even.

  There is a way to delete the old license file in the database via the account root and then try again. For this I recommend prosecution with TAC.

  Kind regards

  Akshay Rouanet

• Cisco Anyconnect Essentials License - What is it

  Hello community.

  I managed to install an ASA with Anyconnect. The Anyconnect client on my laptop works very well.

  But why now to buy a Cisco Anyconnect Essentials License, what exactly is this license?

  AnyConnect works fine without this license.

  But I can not connect with my IPhone with the Cisco Anyconnect for Iphone App. should I buy the Anyconnect for Mobile license and this license just for a single device or all devices. Because this license is really cheap. Cisco licenses normally are expensiv.

  Thank you and best regards patrick

  If you have not all AnyConnect Premium licenses, then you are limited to two simultaneous connections if you do not have the license of anyConnect Essentials. You are right, for i-devices (and Android...) you need the AnyConnect Mobile license.

  AnyConnect Essentials both AnyConnect Mobile are approved by ASA, not user connections. And AnyConnect Mobile needs AnyConnect essential or Preimium AnyConnect license must be activated.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Cisco has any license demo for VCS?

  A way to study, I would test the VCS to my network for a while.

  Cisco has any license demo for VCS?

  Hello

  I think you get very limited (1 x traversal/1 x no traversal) licenses if you have installed the software.

  See also this thread; You can get a limited time license team demonstration license if you ask him nicely.

  https://supportforums.Cisco.com/discussion/11555961/home-lab-VCs-and-TMS...

  Aaron

• where can I download first elements 8 reinstal

  where can I download first elements 8 reinstal

  Hi John,.

  Please see the following thread link: all links to PRE 9, 8 and 7

  Kind regards

  Rahul

• Cisco ACS 4.2: Question about the license...

  Dear Sir

  When I started this project, we start with the demo available on the Download Center on Cisco.

  We have purchase a license and we expect the CD/DVD with the license.

  But... How can I convert the 'demo' to a licensed version?

  Should I reinstall Cisco ACS?

  How the license is supplied, is a registry key? A small file?...?

  Thanks in advance,

  Make a backup of the current configuration, you want to keep it.

  System configuration > backup ACS > backup now.

  Then when you get the full version, just run the setup and it automatically detects the trial version, and invite you, if you want to keep the configuration or not, checks to keep the configuration and move forward. And you'll have improved trial full version.

  There is not the registry keys concerned.

  Kind regards

  Prem

  Please rate if this can help!

• Questions of VMware Infrastructure Client License

  I have a few questions about lincesnese EXS3.5 and VMIC

  I downloaded the vmware infrastructure client to manage it and gives me the following on the VirtualCenter server warning.

  I see the following on top of VMIC software

  localhost.localdomain ESXserver3.5.0...: "assessment 5 days remaining.

  Also, it appears an aboutVirtual Center Server warning

  Is ESX3.5i my unregistered server or my client infrastructure?

  I was under the impression that VMIC and ESX3.5i are free tools?

  Is it not the case?

  Also, what is the relationship between the server, VirtualCenter and ESX3.5i and VMIC?

  If someone can point to explanations on this, it will be a great help.

  And don't somefeatures disappear after assessment?

  Thanks in advance

  Nicole Mun

  NicoleMun wrote:

  I have a few questions about lincesnese EXS3.5 and VMIC

  I downloaded the vmware infrastructure client to manage it and gives me the following on the VirtualCenter server warning.

  I see the following on top of VMIC software

  localhost.localdomain ESXserver3.5.0...: "assessment 5 days remaining.

  Also, it appears an aboutVirtual Center Server warning

  Is ESX3.5i my unregistered server or my client infrastructure?

  Your ESX3.5i server is not functional in eval mode. It is a free product, but you must obtain and enter a license key. You should have received this once you download the software from vmware.

  I was under the impression that VMIC and ESX3.5i are free tools?

  They are both.

  Is it not the case?

  Yes they are free, but you must enter the free license key that you received from vmware. It has been some time, I do not remember if I have received me by e-mail or on the download page.

  Also, what is the relationship between the server, VirtualCenter and ESX3.5i and VMIC?

  vCenter (VirtualCenter server) is the management server can manage multiple ESX/ESXi hosts at once. It also provides some additional features, such as vmotion, integration with active directory, etc. - it is not free

  ESX3.5I is one of the hypervisor servers based that you run your virtual machines on - it's free, but you need to get your free license key.

  VMIC is the client software that you use to connect to vCenter or ESX/ESXi host to manage your virtual environment, including the ESXi host. -free and can be downloaded for the guests, once installed ESX.

  If someone can point to explanations on this, it will be a great help.

  And don't somefeatures disappear after assessment?

  Yes.

  Thanks in advance

  Nicole Mun

  -

• First Cisco Nexus VLAN infrastructure detects not

  Hello

  We have recently added 2 Nexus 5010 to our first Infrastructure 2.0.

  Once the synchronization is complete, the device comes as managed.

  When you look through the details of the device, everything seems to be ok, just at the point where research on the VLANs tab, it says:

  "none detected.

  In fact, there are a lot of VLANS on this unit.

  Someone at - it a similar problem?

  Thank you

  Jörg

  Hi Jörg,

  I have checked and confirmed that unfortunately this function is not supported for NEXUS. I mean information of VLAN.

  and I think that "port-channels" are also not taken in charge.

  Thank you-
  Alya
  [Note the useful post]
  Ratings encourage contributors *.