Cisco telepresence camera question - motivates and focus on who speaks. ???

Similar Questions

• Requirements of Cisco TelePresence C for landlines and mobile calls

  Hello everyone,

  I have questions about Cisco TelePresence C: I know that you can call to landline and mobile phones as well as these.

  I would like to know more technical details about this:

  -What else should be part of the installation of the TP C series in the case of calls on fixed or mobile? This Protocol must be used (H320 ISDN)?

  Should I also buy Cisco TelePresence ISDN Link - http://www.cisco.com/c/en/us/products/collaboration-endpoints/telepresen... or can I use a gateway and SIP protocol for fixed lines?

  Thank you for the answers.

  Inorder for you make or receive calls to PSTN/Mobile then you will need some sort of bridge. Yes the ISDN link can work if you have a few points of termination.

  If you have more endpoints and activate this cabability for all then a network infrastructure device would be best, such as the Cisco TelePresence ISDN GW 3241

• Cisco Telepresence SX20 and Touch 8 Configuration after paired

  Hello

  I successfully connected and combined the SX20 Cisco's Telepresence and Cisco Telepresence Touch 8. Before using the 8 key, we used the remote control instead. As a result, I have two questions about this.

  1. as far as I know, when I use the 8 key, the remote control cannot be used. Is it possible to use both of them?

  2. How can I change the background of my SX20 touch 8? Previously, the remote I can easily choose the background for my SX20. But after pairing with Touch 8, background in my SX20 become a blue large clock. I really want to have a different background but cannot find the way how to change.

  Any help would be appreciated.

  Thank you.

  Sincerely,

  Bagus Hanindhito

  After you connect the 8 Touch, you can still use the remote control, you will need to put on the SX20:

  SystemUnit MenuType experimental configuration: full

  I think that the standard background when using a touchscreen device is what you see, blue with large clock.  However, after the MenuType return in full which will give you the full OSD which is used with the remote and not that of the button, you may be able to change the background then.

• iCloud question library and roll camera

  If I turn on iCloud library on my Mac and my iPhone, all existing photos in iPhone camera will roll and photo streams appear in pictures of my Mac?

  And the existing camera roll photos will be downloaded on my Mac if I download original activated on my Mac?

  The reason I ask this is pictures of my Mac is my master library of photos I want to keep. I could take 10 photos with my iPhone of a scene, but only to copy one of these ten photos to pictures of my Mac and I let all ten photos in the Filmstrip of the iPhone. I'm afraid that when I turn on iCloud photo library on my iPhone, I'll pollute my Mac with photos Photos, I don't want to keep.

  With this in mind, would you recommend that empty of my film and photo stream iPhone before I have activate iCloud photo library on my iPhone?

  Thank you!

  These articles support should help to answer your questions, but in general, all the photos from all sources will download to iCloud photo library if you have enabled it, as all changes and deletions will load:

  iCloud Photo library FAQ - Apple Support

  iCloud Photo Library help - Apple Support

  See you soon,.

  GB

• Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015

  Nice day! My name is Dimitri! Have Cisco TelePresence SX20 + VCS 8.2 Server and Skype for business 2015. Is it possible to set up a conference call SFB and appeal to all subscribers of this conference? At present, we can only call on a single client and SFB. We have the current version of the software TCNC5.1.4.295090 SX20 - is it possible he obnoviti 7, and it will help to improve the situation? Thank you!

  I'm no expert on this technology, but I have some idea and already deployed some projects dealing with the integration of Cisco (CUCM, VCS) video infrastructure to Microsoft video infra like Lync. It would be the same process to make it work in your case.

  How does your deployed SFB? How do you do a conference for audio and video, participants can join the conference by dialing?

  • Mediation server would be required as a front-end server for you to integrate IP/PBXS using SIP trunk to enable voice (audio) Conference with the participants to the PSTN.
  • AVMCU Should be (Audio video Multipoint Conferencing Unit) will host the video conference that will include video endpoints as participants.
  • Video of Interop (SCREW) Server would be required to interface your SFB to third video conference infrastructure such as Cisco UCM or VCS for the endpoints Cisco call client SFB of endpoint of Cisco to participate to the conference organised on SFB by dialing the conference number.

  I'd say contact your AM SFB or Support as well for queries about how to plan your infrastructure SFB and direction.

  Kind regards

  Acevirgil

• How to extend your horizontal field of vision for Cisco TelePresence PrecisionHDMC camera

  Hello

  We use the camera PrecisionHDMC of Cisco TelePresence, but we want to expand the horizontal field of vision?

  Do what van?

  Kind regards

  Martin

  Hello Martin

  Telepresence PrecisionHDMC camera comes with the fixed maximum VISION field, depends on the model you have.

  Please visit this link:

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11307/ps11335/data_sheet_c78-669051.PDF

  Thank you

  Rafal

• End of sale (EoS) / end of life (EoL) information on Cisco TelePresence system 1700 MXP

  I have a question about the EoL (http://www.cisco.com/c/en/us/products/collaboration-endpoints/eos-eol-po...) policy and the announcement of EoS/EoL Cisco TelePresence system 1700 MXP (http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints...).

  According to the policy of the EoL, paragraph 4 ter, "after the first year and for the operating system SW - if available - we will offer bug fixes, versions of maintenance, workarounds or patches for a period of 4 years for operating system software."  Therefore, it is 5 years after the Date of the EoS, which could make the OS support close on 28/02/2017 EoL products.  I'm one to believe that a product and its applicable operating system are good as long as the company provides patches for bugs/flaws.

  My question is about the migration of the product suggestions.  The suggestion is to "migrate to the Cisco EX Series (the EX60 or solution EX90) telepresence system."  However, when the announcement of EoS/EoL EX60 inspection, the "SW maintenance communicated End Date of: HW, SW OS ' 06 07, 2016.  Note that it is not the end of Maintenance SW verbiage in 1700 MXP EoS/EoL announcement.  I'm under the assumption that the new product within OS support only one model exceeded?  Why anyone would follow the suggested migration if I get fewer months support OS than an older model?  Should I go out of date on the announcement of the EoS/EoL, or use the 5-year rule as shown in the end of life policy.

  If I am interpreting this wrong, please do not hesitate to correct me.  I am trying to understand the explicit verbiage in the end of life and ads EoS/EoL policy.

  As the 1700 MXP announcement was published in 2011, at that time, the EX60/90 was a legitimate substitute. However years later, endpoints EX Series are now EOS, you should look at alternatives for the EX series instead.

  The announcement of the EOS/EOL indicates a date of end of software support, you should go there. The reason that ad 1700 MXP does not list one could be that the date of assumption of the software had already spent or they simply don't have the list at the time. Looking at the latest version of the software for the 1700 MXP, it's F9.3.3 in 2014, I highly doubt, there will be another, but you never know given that other points of MXP endpoints that are not past their published end date of software support.

• Question TMS and conductor - conferences to improve safety by using conference

  Hi people,

  Currently, I implement some projects involving Cisco Telepresence conductor and I was wondering the benefits that conductor brings to the video network, it's really a great solution!

  Discover the benefits of the conductor, I created the following deployment:

  

  It works very well! The customer is very satisfied with the level of security when using this deployment. Their multi-point conferences is safer now.

  Well, when I created this topology I considered not how the environment would work when planning conferences, with TMS and conductor because this client has yet to TMS. Then, I was just shocked when I opened the TMS deployment guide e conductor and find the following statement:

  Note: The exposed conductor TelePresence conference type is not supported in Cisco TMS. Only models conference using the conference meeting type are supported.

  Page 13 - http://www.cisco.com/en/US/docs/telepresence/infrastructure/tms/config_guide/TelePresence_Conductor_with_Cisco_TMS_Deployment_Guide_XC1-2_TMS14-1.pdf

  I almost jumped the bridge... Now, I know that my great topology no longer works with TMS.

  Well, here are my questions:

  Why do we have this limit?

  That Cisco plans to fix this?

  The guide is related to the conductor XC1-2 and 14-1 TMS, something has changed in TMS 14.2.2 and XC2.1?

  I'd appreciate any help really, really!

  Thanks in advance.

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

  Paulo Souza wrote:
  [...] I am wondered the benefits that Conductor brings to the video network, it is really a great solution!

  Agreed! The driver of the telepresence really is a great product.

  Why do we have this limitation?

  Because the feature was never implemented on the side TMS. It was decided that the other characteristics are more important and should be a priority. There is nothing on the type of conference 'Read' which is inherently incompatible with the TMS, but work needs to be done first.

  Examples:

  • The control of conference centre: you will probably see the entries in double Conference if you are using a 'read' conference
  • TMS does not differentiate between the presidents and guests during the creation of scheduled conferences 'Conference' on the conductor.

  None of them are very difficult to solve from a development point of view, but they are not trivial to apply or test either.

  Does Cisco have plans to fix that?
  

  Nothing specific is planned, don't. As always: if it is a problem to your customer, make a request to feature through your account manager or another Cisco point of contact.

  The guide is related to Conductor XC1-2 and TMS 14-1, has any thing been changed  in TMS 14.2.2 and XC2.1?
  

  Conductor XC 2.1 and TMS 14.2.2 is a combination not supported, but nothing has been changed to

  2.2 XC and 14.3 TMS: types of conference 'Read' are not yet supported.

  Best regards

  Kjetil

• Extension of Cisco TelePresence Management Suite Analytics

  Hello - I have a few queries on Cisco TelePresence Management Suite Analytics Extension and wanted to get help on the same.

  A. Cisco active development on this product and/or have predefined routes for this platform? We have not quite

  hear updates during the liberation of UC SEVT 10.0 for this platform?

  B. what kind of support is available for this platform in a perspective of customization of the report?

  C. are there examples of SQL scripts that could be re-used to produce reports of the below type:

  • Video endpoint / use of rooms
  • Number of subscriptions too video session
  • Capacity Trending & forecasting for the use of a Port of MCU and increases endpoint.

  D. What are the technical limitations known from the point of view analytics platform? In other words, it does not imply that

  the analytical potential lies in the hands of developer and NOT the platform, taking into account its APIs?

  Thank you

  SG

  See this thread, message of Kjetil Rees (marked as a correct answer) in particular:

  https://supportforums.Cisco.com/message/3449977

  You aren't going to get an answer about the development plans and roadmaps here in a public forum, you will need to contact your Cisco representative for this kind of information.

  If you want something where all the work has been done for you, and that is customized to your specific needs, then you might want to consider looking at vAnalytics, http://vyopta.com/products/vanalytics of Vyopta, http://vyopta.com/

  No, I am not associated with Vyopta, however, we use one of their products.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Content Server Cisco telepresence - separate content

  We have a Cisco Telepresence Content server v5.3 build 3486.

  My client is looking for a recorded video to divide without content. Kindly advice how to do it. Please note that it is a recorded video.

  I went through the models that we have to TCL, but there just passing through, joined, stacked and PIP.

  If you already have a record that contains content, that content is displayed, there no deactivation part as it is already registered.  I noticed you questions about video recording without content in another discussion, I hope this is helpful in this case.

• The implications of Cisco Telepresence server operation mode

  I have a CISCO Telepresence server that is currently running in mode managed locally, if change you it remotely and add it to my TMS, will I lose all my permament locally created conference rooms? (be they get deleted?)

  Thank you!

  HI Douglas.  TS blade didn't need to be mode remotely managed so that it can be managed by TMS.  This mode is used for the management as a conductor Telepresense.

  When it was presented, was 3.0 TS.

  Release notes:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TS/release_note/Cisco_Telepresence_Server_Release_Notes_3-0_2-24.PDF

  Page 2 pretty much answer your questions here.

  If your not using a conductor or by using your own program API to use TS in this mode, its better to leave behind in managed mode and add the system to MSD and leave it that way.  This is the normal operating mode if you use the TMS.  Let in managed mode locally, add it to the TMS and you can book etc. against it using TMS meetings.  If automatic discovery is enabled in TMS, permanent meetings should appear in the CCC.

  I hope this helps.

  VR

  Patrick

• Looking for applications to record video zoom and focus adjustment

  Hello, I'm looking for a way to record my videos of lesson (70 min) by the iPhone 5. I love the camera by default, but I need their registration by the lens back and the rear lens doesn't have a zoom and focus adjustment features.

  I tried to use some applications, but it's really hard to find a good. Now I use 'Caméra Pro', but it doesn't have the setting. I found "MoviePro: VCR with unlimited options", but the focus adjustment is not stable for the registration of a computer screen (I use the computer a couple times a lesson screen).

  If there is a good idea, good tips want to me please. I am looking this for a couple of years. If there is a good way, I'm happy to consider changing iPhone 6.

  Thanks for your time,

  You can try the "professional camera. The app will allow you to adjust the focus point and exposure.

• I just bought my camera t6i today and I was outside taking pictures and a small Cliff fell the

  I just bought my camera t6i today and I was out taking pictures and fell on a small cliff, camera hit the ground, but I think that the autofocus is turned off but I do not know quite well the camera. Anyone know?

  Thanks in advance!

  Do you mean you can manually focus the lens, but it will not focus in AF mode?

• Is any impact of a change of the password of the local user account on an instance of a content server Cisco TelePresence virtual computer?

  Hello

  I'm looking to see if there is an impact to change the password of the local user account on an instance of a content server Cisco TelePresence virtual machine?

  The software version is v6.2 build 4073.

  Thank you in advance,

  Robert

  I'll assume, you are referring to the administrator account, but it can be applied to any local account which is located on the TCS server itself.  It has no impact to change the password, unless you are using doesn't say account to connect to the server of TCS or web interface, it will not affect the application of TCS as most things such as external storage or clustering rely on domain accounts and not the local server.

• Driver of Cisco Telepresence - room LoopBack

  Hello world

  Is it possible to create a meeting room on Cisco Telepresence driver that will return the video to the appellant alone in the room? As the [email protected] / * / Cisco's Sip URI? (A kind of selfview room)

  Thanks for your help.

  It is possible to show only one participant connected to a MCU conference selfview, but not for telepresence Server conferences.  It comes without caring if the driver is involved or not.  The service provided by Cisco closure is obtained with the C40/60 endpoints where the audio and the video plays in a loop directly to the connected call (output HDMI to HDMI-in, output audio RCA audio-in RCA/RCA).