Question TMS and conductor - conferences to improve safety by using conference

Similar Questions

• TMS-> Scheduler conductor calls

  Hello

  I m configuration of a conductor (x3.0.3) with a microcontroller for planning appeals in tms 14.6. Previosly, I set up requires ad hoc and appointment and works very well.

  At tms, I added the conductor, but when I added the alias configuration, an error "unable to connect the driver to telepresence to check the configuration of the alias. I think that the configuration is correct, name, alias boss and priority it s even the configuration of the alias the conductor.

  I read another post but I Don t know if it s mandatory that the bridge, bridge pool and services preferences are dedicated for Scheduler calls. I have only 1 mcu, then I have can´t set several bridge...

  Can you help me add aliases on MSDS?

  Kind regards!

  The match of alias in TMS must be in the format of the actual address, not a regular expression.  The only exception is if you plan to use a variable in your speech that represent the numbers that are filled by a digital ID in the settings of conductor in MSDS.  See tasks 3 and 7 of the guide I linked in the my first answer on MSDS alias configuration ID and numeric base.

  Example of my config TMS and conductor.  Note the {\d{3} in the driver alias correspond to the digital ID 3-digit base where TMS will insert it into the alias instead of the %, which will allow any person handing Chief conductor to match the alias TMS generated since it is adding 3 numbers because of the digital ID.

  • Alias of conductor - (871005\d{3})(@domain\.com)?
  • TMS alias - [email protected]/ * /.
  • MSD digital ID base - 100

  Looking at the alias you are trying to configure, you want to have some numbers inserted into the address represented by \d.  According to what your digital ID base, I would do the following.

  • Conductor alias - 51\d{#}(@domain\.com)?
    • # number must represent the number of digits of your digital card, if you are only using a single digit, and then use only \d and remove the {#}.
  • TMS alias - [email protected]/ * /.

  (@domain\ .com)? helps the driver to match the alias with and without the portion of the field incoming calls.

• Integration of TMS/TMSXE/conductor and Exchange

  Just installed new TMS/TMSXE/conductor for a customer and the initial test was OK but have a question.

  When TMSXE sends the notification to inviting him with the information that the meeting has been scheduled and information to others to call for the meeting, is there a way for TMSXE to also send information to people who have been invited as well?

  The client thinks it would be a pain to make the cut and past in humans invite you again

  If there is somewhere in the documentation that I missed, plase let me know.

  Thank you.

  TMS will not send e-mail confirmation of booking to anyone else that the person who at the request of the Conference.  By the TMSXE user's Guide, the Scheduler will send the e-mail confirmation for guests, or paste its content in the original meeting invitation.

• Video conference will operate without a license server TP and conductor?

  Hi all

  We need POC for video conferencing with Cisco Jabber on desktop. The scenario is similar to that we have CUCM 10.5 running in the trial license and server TP and TP driver running on the virtual machine without a license.

  We will reach videoconference without license server TP and conductor?

  Thank you & best regards

  Louis Nithin.

  Conductor Essentials can run without licenses, it offers all the functions of conductor but is limited to 1 bridge Conference and no grouping, refer to table 1 in the conductor datasheet for more information.

  TelePresence Server requires licenses to operate, you will need to purchase a license for the software, so it can be activated, as well as wallpapers or multiparty license licenses.  Screen licenses are per participant and installed on the telepresence server itself, while the multi-party licenses are either user or conference of base that are installed on the conductor.  Refer to the presentation of the product just above 1 Figure in the data sheet of the telepresence Server about the screen and the multiparty licensing options.

• TC cannot connect to TMS on demand conference

  Hello community,

  I sent TCS in our video conference infrastructure and SIP Trunk to CUCM.

  I can do by opening a web session of the TCS for manual registration and dial points endpoint or lectures on the conductor using SIP.

  But if I do the Conference planning on recording of the Conference, the TCS and TMS don't auto connect to the Conference. Registration (SIP URI) alias are configured on TCS.

  I see on the connection of conference TMS setting the driver calls the CHT by using the h.323 protocol but TCS is not registered with the h.323 Gatekeeper. It's using a SIP trunk to CUCM. Is this a limitation if the TCS uses SIP trunk?

  tcs_error.jpg

  

  Thank you.

  ACCOUNT that is configured with CUCM planning only is not supported yet in TMS using the recording during a conference booking. See cisco-tms-cant-schedule-sip-recordings-tcs for more details, the solution is to add the alias to record with a participating entry model or the phone book.

• I've forgotten the answer to my security questions. And now it's blok

  I've forgotten the answer to my security question. And now I can go in real life.

  Note that there are links in this article, where you can contact Apple > If you forgot your Apple ID - Apple Support security questions answered

• What is the best software to improve performance and free hard disk cleanup. I used MacKeeper, but I'm tired of paying annual fees for this service.

  What is the best software to improve performance and free hard drive cleanup? I used MacKeeper, but I'm tired of paying annual fees for this service.

  You shouldn't have these software.  See discussion of Klaus1

  Do not install MacKeeper

  See also this one by Klaus1

  Viruses, Trojans, Malware - and other aspects of Internet Security

• I forgot my secret question, answer and the second email but I have the password of my ID Apple and my phone number. I want to receive by email for my secret to my Apple ID issue because it is a gmail account. Please help me

  I forgot my secret question, answer and the second email but I have the password of my ID Apple and my phone number. I want to receive by email for my secret to my Apple ID issue because it is a gmail account. Please help me

  You have to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  
  (139026)

• 2 questions: autonomy and recovery

  Hello

  I am considering trading in my iPod 5th generation for a 6th gen, since I've had for almost two years and have come to understand in the last month or two that there more much battery capacity (it lasts almost an hour and a half playing music from my library and using Safari for 20 minutes approximately no other substantive program open to the brightness of the backlight 1/3; If I try to play a game or take photos, I am lucky if it lasts 15-20 minutes after a full charge).  Rather than replace the battery, I prefer having more recent model, mainly because it has double the RAM and would be able to manage the games my current camera cannot.

  I have 2 questions:

  


  1. with the way that I use it, what is the best way to preserve the battery life in my next camera?  I keep connected while listening to it for a full day of work and then at night, I also keep connected while I listen to the music/videos to fall asleep and need the morning because it serves as my alarm clock.  Is better for the life of the battery to the battery become almost exhausted at work before plugging in, rather than keep it plugged in all day?

  2. as my current is still in good condition apart from the battery, I want to trade it at best buy when purchasing a new one.  Not to mention that the reset to factory settings, is there anything else I need to do to prepare or make sure that the new user will not access anything to be me?

  This information should help.

  1. it shouldn't really hurt to keep the unit plugged in, but it will be bad for the battery to become almost exhausted. Lithium-ion batteries that are just not right when the treaties in this way. However, you could let him use a battery before plugging it back in again once, say 50% or more.

  2 see this support document. What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• I forgot my security question answers and my email resue has a mistaket

  I forgot my security question answers and my email resue has a mistaket

  You have to ask Apple to reset your security questions. To do this, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (137726)

• Emailing to my question mark and supervise the work on the first, then the small e accent when arrives to her frame them and the capital E with the accent comes for the question mark.

  get the e french instead of the question mark or frame them

  Emailing to my question mark and supervise the work on the first, then the small e accent when arrives to her frame them and the capital E with the accent comes for the question mark.  Can you tell me what is the cause and how to fix it.  Thank you.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://windowslivehelp.com/forums.aspx?ProductID=15

  It will be useful.

• I asked a question? and I'm not.

  I asked a question? and I'm not.

  Lucy

  You can click on your username in the upper right corner, and it will take you to your profile page where are all your questions (and everything else).

  http://answers.Microsoft.com/en-us/profile/02cee6c7-D2C2-4387-adf3-5c19df6c6905  It is also your profile page

• I asked a question yesterday and cannot find it.please help

  I asked a question yesterday and can't find it.

  Hi Jennifer,.

  It's here: http://answers.microsoft.com/en-us/protect/forum/protect_other-protect_scanning/i-cant-download-anything/c4590e65-a61a-45e6-8f00-3d2f75d77d52.

  For the future, just click on the name at the top right of the screen to go to your profile and then page you click the Questions tab.  All the questions you ever wondered are there and you can then select the one you want and click on it to go.

  Best wishes!

  Kosh

• Media Center Question can I have set up as a server and the other two as clients, each using two of the tuners of the card?

  I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.

  Any ideas?

  On Fri, September 19, 2014 12:28:56 + 0000, SamJ008 wrote:
   
  > I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.
  >>
  >>
  >>
  > Any ideas
   
   
  Start reading here
  http://TheDigitalLifestyle.com/w/index.php/2010/01/29/why-all-the-excitement-over-network-tuners/
   
  You will not be able to use your existing tuners like tuner network. Microsoft has
  arrested development of Media Center, so don't expect any new hardware/software to
  appear.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• question about hardware dspfarm conference bridge

  Hi, I know that the software conference CUCM bridge can handl g711 calls. and under what circumstances, to use the bridge of material content?  the ISDN call is converted as g711 before he sent on the phones, and I do not see it is necessary to configure the conferencing bridge of material in normal conference call on the day the day.

  also on the same topic of DSP, if I PVDM3-32 and 64-PVDM installed on the same router and I want to configure transcoding on PVDM3-64, can I have the options to choose?

  Thank you very much.

  Roy

  Hi Roy, there may be scenarios where you have some users configured to use G729. In this case when these users try to join or use the resources of conference bridge, it will fail if you have only the software conference bridge. That's why I always advised to have resources dsp on the user of local router for the hardware conference bridge.

  Also, when the hardware configuration and software conference bridge, make sure that you do not assign them to the same GMP. The case Conference requiring a bridge material conf sometimes fails. This is because when they are assigned to the same MRG, callmanager them selects alternating. So make sure that you have separate MRG for soft conf resources and hardware.

  Yes, you can mix different PVDM3 modules in the same chassis; However, the DSP each chip in PVDM3 material has to be assigned to a task or another. For example. You can't have the same DSP chip (which there are two on the - 32 or four on part-64) assigned to do conferences and media simultaneously to terminate employment. Don't forget to use the Calculator of DSP to understand what you need.

  Please note all useful posts

  "There is a width in the mercy of God as the width of the sea. There is a kindness in his justice, which is more freedom"