Cisco UCS does not "see" 2 chassis

Similar Questions

• Does anyone know how to connect a Garmin GPS to the EOS 7 d? The camera does not see.

  When I plug in my Garmin GPS on my EOS 7 d and go into the GPS settings in the menu. The camera does not see all I get is "GPS not connected indication." The GPS turned on and functional. Someone at - it ideas?

  Once I had an application that you had photographed the display of a GPS device (the type that a rider could use because they observe "breadcrumbs" trail of your itinerary) on #1 chassis (they wanted to just make sure that you have a picture of the time on the GPS display.

  You then go about your day taking photos with the GPS running indepdently.

  At the end of the day, you import the images and it asks you to enter the time displayed on the first photo.  It uses the display of GPS time and calculates the offset of the time, the camera recorded in the EXIF data (just in case the clocks were not perfectly synchronized).  Then she uses the breadcrumbs on the GPS track and apply the GPS position, data for each photo from your camera roll.

  It was a bit complicated and app tried to take over your App "photo management" (which I didn't... "I wanted just the position data added to the existing images), but it worked.

  The fact is... I was able to add correction of position information to each photo and it did not require actually integrate the GPS to the camera (it was quite after the fact).

  Today, I own the module GPS Canon (MUCH more convenient), so I don't deal with that more.

  hikeray2 wrote:

  When I plug in my Garmin GPS on my EOS 7 d and go into the GPS settings in the menu. The camera does not see all I get is "GPS not connected indication." The GPS turned on and functional. Someone at - it ideas?

• Disk utility does not see an external drive on my network

  I'm trying to reformat the external drive that I use for backup on Time Machine, but disk utility does not see it. She appears in the Finder as a shared drive. I use OS x 10.11.6. Thank you.

  Disk utility is not supposed to see the network drives.

  If it's a USB, connect it to your computer.

  If it's an Ethernet or wireless, using a utility specifically designed for this.

  (145027)

• Version 38.0.1 does not see the passwords stored in previous versions

  Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, users do not even know what their password. This failure is a serious problem.

  Problem solved. Probably the file has been corrupted signons3.txt. I deleted the file, and the new passwords are kept. After this version of the software update and new version I've seen passwords, create a logins.json file and now everything is fine. On all other computers in the company such a problem does not arise.

• Firefox does not open or does not (see/questions/964132)

  was Ok until recently

  Please include more information, such as your operating system (Windows?) and the version, more exactly what is happening when you try to start Firefox. The information provided in a recent Firefox crash report, if any, can also help. See Firefox plant - troubleshoot and prevent assistance fixing crashes under help in setting this crash and post any crash report IDs recently (they start with bp - )

  The title of your question, says "Firefox does not open or does not (see/questions/964132)" I have reviewed this issue and it was launched by another user of Firefox. /questions/964132? page = 2 # 477049 answer has a number of suggestions if Firefox does not start. Which have you tried?

  To see other possible solutions

  • Troubleshoot and diagnose problems in Firefox
  • http://KB.mozillazine.org/Browser_will_not_start_up
  • / issues/958850 Firefox does not open after a reboot

  Note: A "clean and reinstall" was one of the suggestions/issues/964132. This means remove the Firefox application and then files by reinstalling Firefox since a new download, as explained at the stage of "Reinstall Firefox" in troubleshoot and diagnose problems in Firefox. So that allows you to start Firefox, but if the problem comes back after the computer restarts, you should make another "clean reinstall" and then resolve your plugins by disabling all, as suggested by the troubleshoot and diagnose problems of Firefox article.

• Connected to but the Airport utility does not see the time capsules

  Hi, I have several time capsules.

  I can connect to the web, but the airport utility does not see the time capsules.  I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.

  What now?

  Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.

  Other than what Mac running what OS do you use?

  This modem you have and how is the installation of TC on the network.

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• MO does not see my HD Mactor. But before...

  Hello

  I have 1 TB HD Mactor. And I used it as TimeMachine for a long time. But after the last software update, MacBook started does not see the external hard drive. And he said: "the disk you inserted is not readable by this computer. What can I do? I don't want to lose the datas in HD using disk utility.

  Please help me.

  Kind regards

  ......

  All hard disks have finishes by fail.  Which may occur to your 1 TB HDD Mactor.

  Save your MBP on another HARD disk.

  Then look for hardware problems.  Using different USB ports.  Try different USB cables.  Remove the HARD drive and install in another known functional pregnant.  Test it on another Mac.

  If no success, then test it using disk utility > first aid.

  Ciao.

• Satellite Pro M70 does not see HARD drive sometimes

  Help me!

  My computer does not see my hard drive but see Installer and another computer.
  My hard drive is working and I put the new drive hard but computer does not see.
  And when I install XP on the computer I can see HDD format during the installation.
  And when prawns my computer I do not see the HARD disk again.

  Help me please

  Hello

  I think that it s a HDD issue naturally it s really strange that the HARD drive is different sometimes and sometimes it s is not visible, but I doubt that it could be software related issue. That's why I think that it s a drive HARD and in my opinion, you should check if other HDD SATA runs correctly.

  Good bye

• Satellite Pro P300-1AY does not see wireless networks

  I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
  I replaced my card and it does not solve the issue.

  I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.

  I use win XP. Any idea?

  Hello

  You have the latest version of the BIOS?
  If this isn't the case, then you should first update the BIOS!

  The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
  As far as I know, you must use 2.5 or later version BIOS.

  Check it!

• iTunes does not see the iphone 5 s

  Hi, when you connect your phone to a computer Windows 10 iYunes does not see my phone. When you connect to a MAC everything is good. What should do? which faces?

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  TT2

• The new version does not see my camera. But my cam works well with older versions. What should I do?

  The new version of Skype does not see my camera. But my cam works well with all older versions. And it works with any other programs as well.

  Try to uninstall the version 6.18 and install version Skype 6.14.0.104.

  You can use this download link for the 6.14.0.104 version:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Don't forget to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network

  Hello

  My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
  In our office, the computers are all equipped with Windows XP.

  When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
  I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.

  I hope you understand what I mean.

  The man said that he had no this problem with non - OEM Windows Vista versions.
  He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
  He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.

  Does anyone have an idea of the cause of this problem?

  > The man said that he had no this problem with non - OEM Windows Vista versions.
  > It meant that the problem was with the oem versions of Vista preinstalled on laptops only.

  That's nonsense for me
  The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
  There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and tools

  Check this box:
  http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1

  You will find information that a problem has to do with the new Windows Vista network map.
  Windows Vista uses a new Protocol (Link Layer Topology Discovery).
  LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
  But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.

  But you can fix the problem by downloading and installing the layer topology discovery responder.
  Install it and your PC Windows XP will appear on the network map.

• Satellite 1415 does not see HARD drive

  I just finished my old 30g HD to a 160g via a cable usb/ide on my Satellite 1415 cloning/adaptation.

  I've used Norton Ghost who said using the copy MBR 'not' option, I have to format the new drive. It took me over six hours to do due to overheating closed the first period which forced me to do it again.

  Now with the new full disk, I installed in the machine and starts, received a message "NTLDR is missing" on the first try. After going in (WinXP) disk management I noticed that the new drive was now three scores, two the same size that the old hard drive and the last not allocated. I looked at the files in the first partition and found that I do not need so I deleted the files and the partition. The remaining active partition has all the Po files, that I need so I have it assigned a drive letter.

  Now to start with the new drive I get missing operating system message. I ve changed the boot order and linked to the boot the ghost CD but had no luck with either. Of course the machine does not see the disk, so my question is how I can get to see the new drive letter to start when it seems now that for a C:\ drive?

  The only option I see in the BIOS is boot order change. Thank you

  Hello

  To better understand:
  The ability of the entire HARD drive is recognized properly?

  To be honest, the whole story is a bit confusing for me. I use Norton Ghost with WXP too and I know that you can create your own recovery image and burn on CD or DVD. This medium, that you can use to install an operating system.

  You can also save files to recovery on the second partition and then copy to external HARD disk.

  With the new HARD drive using Microsoft facilities CD and install WXP. Create own partitions on the new HARD drive and all ghost copies files to the second partition (new HARD drive). You may not install all driver and tools but install Ghost on this OS fresh and naked. Start the ghost and Recover My Computer option. So, after 20 minutes, you'll WXP as on the old HARD drive.

  I did it with my old Tecra.

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.