Setup search rule of venture capital to Lync Server

Similar Questions

• Understanding search rules - Source.

  I have a scenario very very simple just to learn more about the rules of research & transformations and how they work.

  I can't get the search rules to work with areas sources of some how restrict conversions based on the source.

  I understand the benefits of using one or the other for simple conversions, etc.

  At the moment I only use search with no transformations on the VCSC rules.

  Scenario:

  EX90 - [email protected]/ * / (recorded with VCSC)

  VCSC - 172.16.246.92

  VCSe - 172.16.246.93

  VCSe - 10.0.0.230 (NAT - PublicIP)

  FWLocal - 10.0.0.1

  FWInet - publicIP

  Jabber - [email protected] / * / (recorded with VCSe)

  Jabber - [email protected] / * / (Findme on VCSe)

  EX90--CSCV--VCSe--FW--Internet--Jabber Video.

  Everything works fine if I dial for example 8095556631 Jabber in the EX90 video.

  Demand of the VCSe to the VCSC happens like this: [email protected] / * /(VCSe)--> [email protected]/ * / (VCSC).

  This work without any intervention from the rules of the VCSC research because join '@172.16.246.92' of the VCSe.

  Everything works fine if I dial for example * EX90 6631 to video of Jabber.

  The request of the VCSC to the VCSe arrives like this: [email protected]/ * / (VCSC)--> [email protected] / * /.

  This is done using search with localZone.GetDaylightChanges source rules to the destination TraversalZone.

  It does not work! If I dial for example 6631 (Extension) to the EX90 Jabber video.

  Demand of the VCSe to the VCSC happens like this: [email protected] / * / (VCSe)--> [email protected]/ * / (VCSC). (That's what I want to change to [email protected]/ * / without using transformations on the VCSC and using the rule of research with source TraversalZone).

  The rule search:

  Name Desde VCSe

  40 priority (like right now)

  Any protocol

  Source TraversalZone

  Auth                            No

  Alias fashion model

  Model Regex

  Pattern string (\d{4})(@172.16.246.92)

  Replace patter behavior - 809555\1\2

  To stop the game

  Target localZone.GetDaylightChanges

  Newspapers:

  Detail = "" send H.225 ReleaseComplete Q.931 Cause: absent subscriber, H.225 Cause: non-registered party called, Info: not found additional Destination "(!)" @# $ I understand this one. $# @!)

  "Module-level =" Network.Search' = 'INFO': detail = "given to search the rule"LocalZoneMatch"objective 'LocalZone.GetDaylightChanges' to '100' of priority with alias [email protected]/ * /' ' (! @# $ I understand this one. $# @!)

  "Module-level =" Network.Search' = 'INFO': detail = "search rule"Hacía CUCM"does not match destination alias [email protected]/ * /' ' (! @# $ I understand this one. $# @!)

  "Module-level =" Network.Search' = 'INFO': detail = "search rule 'Hacía VCSe' does not match destination alias [email protected]/ * /' ' (! @# $ I understand this one. $# @!)

  Module level = "Network.Search' = 'INFO': detail = 'Rule"Desde VCSe"ignored due to the filtering of search source' (! @# $ I DO NOT understand this one. $# @!)"

  Module level = "Network.Search' = 'INFO': detail = 'search"Hacía CUCM - Extension"rule ignored due to the filtering source' (! @# $ I understand this one. $# @!)"

  Module = "Network.H323" Level = "INFO": Dst - ip = "172.16.246.93" Dst-port = "15070" detail = "Send H.225 procedure" "

  Module = "Network.H323" Level = "INFO": ip - Src = "172.16.246.93" Src-port "15070" = "

  Detail = "kbps of bandwidth: 5952 H.225 Setup H.323v6 DestAlias receipt:[email protected]/ * / DestCSAddr: ['IPv4"TCP"172.16.246.92:1720']" vendor: TANDBERG ' "

  I do not understand how to select Source: TraversalZone the source of the application gives me "ignored due to filtering of the source.

  Seems I am missing some basics on how to find work for incoming requests not generated rules locally.

  THX in adv.

  The guides were less concerning research and own deployment, which also lie to the use of the domain

  To quote the guide:

  
  The routing configuration in this document searches for destination aliases that have valid SIP URIs (that is, using a valid SIP domain, such as [email protected]/* */).
  
  

  Please set up and use a domain name, your rules might address and test again.

  I would stick to a - z, 0-9,-. for the part of the user and the domain of the sip uri!

  I will most likely see because without a propert domain name it does not.

  I would also be careful with many changes, rewrites and search you may see problems with the presence and other things.

• VCS - numbering of the IPS 'known' search rules

  Hello

  We have a standard configuration of VCS-C/VCS-E, with VCS - C, the value 'indirect', VCS-E the 'direct' for calls to unknown IP addresses. It works very well.

  The problem is we have a second remote desktop on MPLS which points of Polycom endpoints (not enrolled in the VCS) and they can be reached via IP address, but they are inside the LAN. I can only call them if I change the 'direct' VCS - C since I see no way to create a search rule targeting a specific range of IP addresses - it will not allow the models for comparison with IP addresses!

  Am I missing something here?

  (Edit: Alok beat me to it)

  Thomas,

  on the VCS - C, you can create one or more subfields with 'subnet' membership of type rules where you add IP addresses or subnets that you want to be able to deal directly via the VCS - C.

  No matter what IP address that corresponds to a membership rule subarea for a subzone is considered "Known" VCS in question, which allows VCS to make the call to this IP address directly.

  This is described in the VCS Administrator's guide in component IP "section:

  The VCS considers that an IP address to be "known" if she is:

  -is the IP of a locally registered endpoint
  -Beach one of the membership rules configured subarea on the VCS to address intellectual property statement

  In addition to this, need a search rule "AnyIPAddress" for the local area on the RESUME said.

  Hope this helps,

  Andreas

• License avaliability of venture capital

  How can I get business licenses available in venture capital VMfarm number. and no. total licenses used by existing server farm.

  Please note. We have vmfarm with vcs2.5 esx3.5

  You can see it with you VI Client Directors (key icon) go to LICENSES. See the image

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

• Cisco VCS Lync Interworking with Lync Server/multiple domains

  Unfortunately I don't find any reference in the guides of deploymend, if it is possible to master several server/domains on a single VCSE lync. Is there a way to gather environments different lync with a vcs? For example, interoperability with clients a and b, which have completely separated from lync environments.

  We wanted to master it with VCSE, or is the Microsoft key option only avalible for VCS?

  Thanks for the reply.

  The Deployment Guide says you should use a VCS-control, not a VCS-Highway to serve as gateway of Lync.

  I don't think I have several B2BUAs connect to Lync on a single VCS - you would need to have a separate VCS for each Lync environment (IE, one for the customer) and another for client B and search rules appropriate to direct traffic areas in the right direction.

• I change the ip address on the Exchange, share point and lync server other than the old serise

  How can I change the new series of IP on share point server lync, exchange server

  Hello

  Your question is addressed in the community forums.

  Try TechNet:

  TechNet Forums Home (view all) http://social.technet.microsoft.com/Forums/en-us/home

  Exchange Server http://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver

  SharePoint http://social.technet.microsoft.com/Forums/sharepoint/en-US/home?category=sharepoint

  Lync http://social.technet.microsoft.com/Forums/lync/en-US/home?category=ocs

  Lync Server http://social.technet.microsoft.com/Forums/lync/en-US/home?category=lync

  Don

• I configure to do mediation Lync server send INVITATION with parameter URI Conference and isfocus?

  I have the standard edition Lync Server 2013 with mediation server had TO connect via sip trunk; and I also have 2 Lync 2010 Client.

  First of all, Lync Client A calls B Lync Client and call in place.

  Seconds, participant to invite Lync Client B (call 861002 for a sip phone that connects to the DUT)

  The conference call itself has no problem, everything is fine except that:

  The mediation server PROMPT message to the DUT has NO Conference URI or the isfocus parameter in the Contact header field.

  There will be some configuration that I missed. Please help me solve this problem.

  Thanks in advance.

  Johnny

  Hello

  Post your question in the Forums of Lync server: http://social.technet.microsoft.com/forums/en-us/category/lync/

  Thank you.

• I wish I had a client on my PC to communicate with the Lync server, but it does not work.

  Evaluation of the VHD Lync 2010 program

  I'm quite new to Lync and I'm trying to understand how it all works. I downloaded the virtual computer files and got successfully throughout the environment, but now, I would like to have a client on my PC to communicate with the Lync server but I'm not having any luck.

  Here are the servers that I have:

  DC

  Exum

  Lync-Qms

  Lync-Se

  SPS2010

  These are all in an internal network and I gave the Lync-SE server outside access, assuming that it's the server that my client needs to communicate with because he runs the Lync server. Initially, I was getting a certificate error. I exported the certificate of the server DC, installed on my client and the client toward the DC server who gave me the certificate number, but now I get an error that the server is temporarily unavailable. I'm far from base here?

  Hello

  Thank you for visiting the Microsoft answers community site. Your question is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/OCs

  I hope this helps.

• Search protocal for gmail pop and smtp server settings

  serverportnumbersettingsforgmailinwindowsmail

  Search protocal for gmail pop and smtp server settings

  Hi Ray,

  You must get those Gmail service to customer or technical support.  Check here: http://mail.google.com/support/?hl=en or you can try the forum gmail here: http://www.google.com/support/forum/p/gmail?hl=en&utm_source=HC&utm_medium=leftnav&utm_campaign=gmail.

  I hope this helps.

  Good luck!

• MS VirtualLab Lync Server 2010 does not. error code 1. tested from multiple PCs. What is the problem?

  Hello
   
  While trying to start wirtual lab I received the following error:
   
  There was an error in the environment of virtual laboratory of construction. Try again or contact support support if the problem persists. Error code: 1. status: failed
   
  I tried to run the laboratories of different pc and got the same error each time.
   
  Please specify what is the problem?
   
  Yesterday, I used these labs without all the problems.
   
  I added the site in the zone of confidence. also all of the custom software add-ons necessary have been installed.
   
  Thanks in advance.

  Hi AndriiKyianov,

  Thanks for posting your question in the Microsoft answers Forum. Your question about Lync Server 2010 it will be better answered by experts in the Lync Server Forums. Please repost your question here.

• CUCM v8.5 with 3 SIP Trunks to the Lync Server - Route algorithm of Distribution for the Group

  I CUCM connected to three different Lync server via 3 different SIP trunks.

  RG is composed of the following elements:

  LYNC SIP TRUNK 1 (1.1.1.1)

  LYNC SIP TRUNK 2 (2.2.2.2)

  LYNC SIP TRUNK 3 (3.3.3.3)

  The route group was built with "Top Down" the algorithm of distribution. The first SIP trunk knows congestion and some calls are never routed to secondary and tertiary SIP trunks.

  Based on all the forum posts I've seen - it seems that I have to configure the algorithm of group distribution of ranges as 'circular '.

  If I change the algorithm group of "Circular" lines - can I expect the following results:

  1. first call will go through LYNC SIP TRUNK 1

  2. second call will cross LYNC SIP TRUNK 2

  3. third call will cross LYNC SIP TRUNK 3

  When I change the algorithm of distribution of the route to the 'circular' group and click 'SAVE', I am invited on "RESET".  This service assigns to the existing calls through SIP Trunks?

  TIA,

  Amir

  Hello

  the circular algorithm will work the way you mentioned, but I suggest to try and make sure that is not perform integration

  to reset the SIP trunk actually active calls should not be made because the gose media directly between endpoint unles syou use something like trust rely wher evous enforce calls to go to the SIP

  Therefore, in most cases is should be fine just try configuration at the time of the calls will face service disruption

  hope this helps

• Ask to install or assign the certificate on the 2013 Lync Server default

  Hi, I'm in the middle of installing Lync Server 2013 and is stuck on the process "Request, install or assign the certificate on the Lync Server default 2013". Whenever I get this error...
   
  > Assign the certificate
  Game-CSCertificate-Type by default, WebServicesInternal, WebServicesExternal-A872BC92C77A1BF921085E54333C820AFA8A3AE7 footprint - confirm: $false - report "C:\Users\administrator. LOCAL\AppData\Local\Temp\1\Set-CSCertificate-[2013_07_13][21_58_52].html ".
  WARNING: The 'A872BC92C77A1BF921085E54333C820AFA8A3AE7' certificate has an expiration more than five years in the future.
  WARNING: The name of the subject of the certificate "WMSvc-MSLYNC" does not match the name of FQDN full computer (FQDN) "mslync.local.lab".
  ATTENTION: Other object names "' certificate 'A872BC92C77A1BF921085E54333C820AFA8A3AE7' do not contain the names of calculated replacement 'mslync.local.lab, dialin.local.lab, meet.local.lab, admin.local.lab, LyncdiscoverInternal.local.lab, Lyncdiscover.local.lab.
  The following certificate was awarded for the type "Default":
  Default: A872BC92C77A1BF921085E54333C820AFA8A3AE7 WMSvc - MSLYNC 08/07/2023 CN = WMSvc-MSLYNC 61F3BE44FA5E45BD4547A73F8057D533
  The following certificate was awarded for the type "WebServicesInternal":
  WebServicesInternal: A872BC92C77A1BF921085E54333C820AFA8A3AE7 WMSvc-MSLYNC 08/07/2023 CN = WMSvc-MSLYNC 61F3BE44FA5E45BD4547A73F8057D533
  The following certificate was awarded for the type "WebServicesExternal":
  WebServicesExternal: A872BC92C77A1BF921085E54333C820AFA8A3AE7 WMSvc-MSLYNC 08/07/2023 CN = WMSvc-MSLYNC 61F3BE44FA5E45BD4547A73F8057D533
  ATTENTION: The "Set-CSCertificate" treatment completed with warnings. '3' warnings were recorded during this execution.
  WARNING: The detailed results are "C:\Users\administrator. LOCAL\AppData\Local\Temp\1\Set-CSCertificate-[2013_07_13][21_58_52].html ".

  Hi Kumarajit,

   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/Lync/en-us/home?category=Lync
  Hope this information helps.

• Is there any application that searches all files on the disk or server which also indicates the total and available space?

  Is there any application that searches all files on the disk or server which also indicates the total and available space? And after a search, it can also be exported to excel for further analysis?

  Hello

  See if that helps you.

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Here's how to understand Treesize Screenshots:

  http://www.Jam-software.com/treesize_free/screenshots.shtml

• The IOM for Microsoft Lync Server Connector

  Experts,
  
  Do we not have any connector IOM for Microsoft Lync Server (previously Microsoft Office Communications Server)?
  If this is not the case, how can integrate us to IOM for provisioning of users?
  
  Please suggest.
  
  Thank you
  S M.

  Hello

  Oracle isn't connector Lync. You can install the connectors Exchange/AD 11.x and after AD/Exch commissioning, you can write a task to run your custom shell of power which can define lync attributes in AD/Exchange.

  I hope this helps.

  Concerning
  Suren

• search for Leah a capital letter and a digital password?

  is there a way to limit the PasswordEditField to have at least one capital letter of char and a digital tank?

  Thank you!

  Thank you! The CharacterUtilites class works very well